Unknown software in Software Update

They've been there for a while, but am just now getting around to ask about them.
In Software Update, I have 5 updates listed. This is how they appear in this order...
Name
Version
Size
Java for OS X 2012-006
1.0
66.6 MB
SU_TITLE
SU_VERS
3.5 MB
SU_TITLE
SU_VERS
163.3 MB
HP Printer Software Update
2.12
69.5 MB
SU_TITLE
SU_VERS
894.3 MB
For all three of the SU_TITLE entries, the description is SU_DESCRIPTION.
Any idea what to do? Any idea how to get these to display before I update?
Thanks!

Hi,
There is someone remove all the third-party metadata in WSUS Database, then run full sync and initiated scan cycle on the machine. The client successfully scanned updates.
But editing database directly is unsupported by Microsoft.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • TS3694 hi, i tried to do a software update on my iphone 3gs and it comes up with an unknown error code 1015, any ideas?

    i tried to do a software update on my iphone 3gs comes up with an unknown error message code 1015
    any ideas?

    See this post:
    TS3694 Trying to restore and update my iphone 3, the system tells me 1015 error What can I do?

  • What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

    what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

    Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
    “SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
    Here is my original post explaining what I had already tried:
    “Hi all,
    I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
    I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
    I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
    Can anyone help? Please?!
    Thank you!!!
    P.S. We have a PC, with Windows XP Home.”
    Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
    Tiffany
    P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

  • "unknown software exception (0x40000015)" on CC update.  What happened?

    I have no idea when in the update process it failed. An information window was on the screen when I returned to the computer.
    It gives an exception number (0x40000015) and a location: 0x001e54a0.
    And an "OK" button to terminate the application.
    How can I determine what happened?  What programs are affected?
    thanks for any help
    Peter

    Hi petermclennan,
    Please restart your machine and try updating again. If still the same error then kindly uninstall and reinstall CC desktop. Refer the article: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6.
    Additionally refer the thread: Unknown software exception 0x40000015 Solved - Windows 7 Help Forums.
    Regards,
    Romit Sinha

  • Software Update status stuck in Unknown Client check passed/Active

    I've been rooting around in this for a week now so I'm looking for some other ideas.
    A couple of weeks back I tried publishing some updates from SCUP into SCCM. Shortly thereafter I started seeing all my client getting stuck in Unknown "Client check passed/Active" status for Software Updates, starting with my most recent Software
    Update Groups and progressively creeping its way back into older ones.
    Clients' WUAHandler.log show errors with <![LOG[OnSearchComplete - Failed to end search job. Error = 0x8024000f.]LOG]!><time="18:16:20.329+240" date="08-14-2014" component="WUAHandler" context="" type="3"
    thread="2496" file="cwuahandler.cpp:3064">
    Client WindowsUpdate.log shows the same error code: 2014-08-15 11:37:16:278  520 1b7c Agent WARNING: WU client failed Searching for update with error 0x8024000f.
    I also have one of my older deployments starting to pick up a status of Error, code 0X8024000F "Circular update relationships were detected in the metadata."
    I found some folks with similar issues where they were advised to remove the offending updates from their packages. I never got the SCUP updates into any packages; they were showing up as Metadata Only and I started troubleshooting this issue instead. At this
    point I have removed everything from SCUP showing in SCCM console just to make sure. (I think I expired them all in SCUP and then synced with it again.)
    I have tried several client-side fixes that have not resolved the issue (KB971058, rebuild the SoftwareDistribution folder, KB947821).
    I have even uninstalled the WSUS role off my server, restarted, then reinstalled. SCCMw ill sync happily with WSUS and received this week's updates successfully but it cannot pull a status for these new updates and all the existing ones still sit in Unknown
    status in their deployments. I tried creating a new small deployment and it still gets stuck in the same place.
    It looks like my Software Updates metadata in SCCM is a mess and I'm not sure how to resolve it. I think the next step I can think of is to strip the SUP role off the server and pop it back in after its had some time to clean itself up. Does anybody have
    any other less severe suggestions?

    Hi,
    There is someone remove all the third-party metadata in WSUS Database, then run full sync and initiated scan cycle on the machine. The client successfully scanned updates.
    But editing database directly is unsupported by Microsoft.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • The iPhone software update server could not be contacted. An unknown error occurred (-50). I'm using windows 8.1...

    {The iPhone software update server could not be contacted. An unknown error occurred (-50)}. {Verbatim} -
    I'm using windows 8.1...   -   I can't seem to find an answer to -50 ERROR?? -
         Please, Anybody - - HELP!!???
                                              Thank you                 -              Captkirkoes or Mitch         -          9/25/2014

    Hi Captkirkoes,
    If you are getting an error when attempting to update the operating system on your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    Resolve iOS update and restore errors in iTunes
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT4623 Software update for iOS 6.1Error -The iPhone "iPhone" could not be restored. an unknown error occurred (-1).

    I got Software update for iOS 6.1 ..
    After installation - Phone shows message to connect to iTune,
    I connect to iTune - I got message - iTune has detected iPhone in recovery mode. you must restore this iPhone before it can be used with iTune.
    I click on Restore iPhone - it gives error
    The iPhone "iPhone" could not be restored. an unknown error occurred (-1).
    Not my phone is not working - Its dead - is show the screen - Connect to iTune.
    Please help.
    Thanks.

    Error 1 or -1
    This may indicate a hardware issue with your device.
    Follow Troubleshooting security software issues, and restore your device on a different known-good computer.
    If the errors persist on another computer, the device may need service.

  • HT3743 I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do

    I was trying to software update i phone 3g, when software downloaded an install, one unknown error has occurred, and asking for restore, at the same time i am trying to re-store again an error of 1015, happen, what i should do, for solution,
    please advise me,
    best regards,
    Ahmed

    try to edit your host file ang delete any line that contain gs.apple.com

  • Software updates to unknown computers during OSD

    Hi!
    Trying to figure out why my computers during OSD not install software updates. I have deployed all my updates to Unknows Computers collection as available and configured "Install Software Updates" step to install "All software updates".
    When i look into UpdatesDeployment.log i get error: "InstallTargetedUpdates failed, error 87d00708", which is according to
    Torsten means that i does not find any applicable updates to install.
    Do I have to deploy the updates as Required to "Unknows computers" for the updates to install?
    Thanks!

    Hi,
    Unknown computers include the following:
    A computer where the Configuration Manager client is not installed
    A computer that is not imported into Configuration Manager
    A computer that is not been discovered by Configuration Manager
    I think it is because you have SCCM clients installed on these computers when you use "Install Software Updates" step to install updates.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • January software update unknown error -2

    I just bought an iPod Touch and I am trying to apply the January software update. I continually get the error message:
    We could not complete your iTunes Store request.
    An unknown error occurred (-2).
    Any help?

    I tried the update on another computer and I got the same error. I also get the error on both computers: from the iTunes Store home screen, when I click on iPod Touch January Software Upgrade I see the error. I think it is some sort of connection problem. Maybe the Apple servers are getting hit with a lot of upgrade requests?

  • TS1424 I keep getting a message saying, " the ipad software update server could not be contacted.  Unknown error occured (-23).  What can I do?

    I'm trying to restore my ipad, we forgot the passcode.  I get into iTunes, and click on the update and restore button.  After a minute I get a message that says, "the ipad software update server could not contacted. Unknown error occured (-23).  What can I do?

    Temporarily disable any security software on the computer and try again.

  • Software Updates Deployment Evaluation Cycle Enforcement state unknown

    Hi All,
    I have an issue were I deployed software updates to a collection that have a maintenance window of 5 hours. The next day when I checked the deployments tab it show the updates as 75% compliant with 3 Servers failed to install updates as no further maintenance
    windows were planned.
    I then check the deployments tab 2 days later and it still showed 75% compliant but all the servers were in the unknown Client
    check passed/Active
    Is this because I have no further maintenance windows please advise and if not how can I resolve this thanks 

    You should not use the deployments node in the console to check for software updates compliancy. The reason is because it shows the status of the deployment and not of the installation of the updates. For example if the updates are installed, the deployment
    will show compliant, but when the next re-evaluation of the deployment fails, the deployment will show as failed, while the updates are actually still installed. So always use the reports to check for compliancy.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Software Updates Deployment Shows "Unknown" Computers, Previously Had Compliant

    I'm not sure what is going on, but can anyone tell me why a software updates deployment would all of a sudden show all computers as having an "Unknown" status?  Previously, most computers were "Compliant" and there were a couple
    with errors.  When I went to check it (about a week after the original deployment), I found it had reset all to "Unknown" status.  This was yesterday, and now today there are a couple computers showing "Compliant" but most are
    still "Unknown".  It is not set up with ADR, so it's not (at least I don't think) looking for newer updates.  Any ideas?

    A re-evaluation of the software update deployment, which you configure in the client settings, can cause this behavior. That's why you should always use the reports for compliance checks and not the deployments node.
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Three updates from the same Software Update Group showing as unknown, while all the others are showing as expected.

    Hi
    I have an issue from Septembers security updates where three updates from the same software update group are showing as unknown status rather than required / not required / installed etc.
    There are multiple other updates in the same update group and they are all displaying correctly with the figures I would roughly expect.
    I would have expected if something was wrong with the clients not returning software update scans that all the updates in this software update group (all deployed automatically as part of the same ADR) would show the same status of unknown, rather than just
    three of them.
    The updates in question are: KB2894842, KB2972215 & KB2977629 (First two .net 4.0 and last one IE11).
    Now these updates would largely be not required in our organisation as for the most part we use different versions so I would expect them to show as not required.
    Short of kicking off a mass software update scan cycle I don't know a) why this has happened b) if a scan cycle will fix it. Our clients scan every week and its been several weeks since the updates were deployed, that and the other updates have all reported
    back in.
    Anyone have any ideas? Its making the compliance results look quite poor :(
    Thanks
    Jonathan

    Hi,
    Is there any clue in the logs? Please review WUAHandler.log.
    What is the code you get when you run compliance report, like that in the following thread:
    http://social.technet.microsoft.com/Forums/en-US/becda545-4a5e-4ea3-bd83-8c7026767af5/software-update-compliance-report-showing-status-unknown?forum=configmanagerdeployment

  • Software Update Group CLients staus Unknown

    hi
    We have setup sccm 2012 infrastructure  which is having cas and primary ,currently we are getting compliant reports with
    Status unknown /non compliant , those machines are report 1 or 2 days before complaint ,due to machines is offline or not reachable .,management has come with request ,Legacy  wsus if a machine was complaint ,its shows complaint even systems are offline
    ,issue is when we check system  are complaint ,after some day it become comalaint in same SUG(software update Group)
    we don't have any expired updates in group ,some machines are not sending HW ,due to machines is offline  ,so management asking already complaint machines how become non complaint ... do we have any way to save those info ,I mean the history of client
    scan status in sccm 2012 ...we have put client software update scan on every 1 day ...  do we need to change the scan schedule to an extend date 
    ankith

    Legacy  wsus if a machine was complaint ,its shows complaint even systems are offline
    So does ConfigMgr - given that the client scanned once. It will only show "unknown" for updates that were recently added if the client did not report anything back after *new* items were added to the catalog. That's expected and makes sense. 
    Torsten Meringer | http://www.mssccmfaq.de

  • Software Update Deployment - Compliance Status = Unknown - Client Check passed/active

    Hi,
    First I want to say, that I found many Forum-Posts which describes a similar issue, but it is not exactly my issue...
    I have a ADR (Auto Deployment Rule) which creates every Month a Windows Update Package, and deploys it. The Deployment starts from a custom day, and ends 14 days later (Deadline). Now I have the issue, that the compliance chek in the deployment status is
    "reseted" every day (at 0:00) - (at least after the Deadline!)... The Compliance Check starts every day at 0:00 and then tries to reach every Computer again! So if the Computer-object is powered on and responding, it turns over to compliant (because
    it is already compliant - the Windows Update Installation works fine...). But if the Computer is not powered on / not responding the next day, it turns over to "Unknown - Client check passed/active" instead of staying in the Status "compliant"
    until it is powered on / respinding again, then it changes over to compliant again... Why is that?
    Is there a issue with the Client Settings?:
    - Software Update Scan (every day)
    - Software Update Re-Evaluation (every day)
    - Compliance Settings (every day at 0:00) -> but is this not for the Configuration Baselines?
    any other ideas?
    Patrik

    As soon as the computer get the Software Update configuration items, it will start compliance checking, then send the compliance check result to MP.
    From your description, the powered on computers sent the state message to the MP when they got the deployment policy. And the frequency of Status Summarizers of updates deployment for a deployment that was modified in the last
    30 days is 60 minutes. Because the site server had not recieved the state message from the powered off computers so that the compliance state was changed to Unknown.
    Juke Chou
    TechNet Community Support

Maybe you are looking for

  • Not able to Use FaceTime:

    Here are the steps I followed to activate my FaceTime: 1.Seeting> facetime> enter Apple iD Screen opens up. 2. i enter the apple id and pass word hit signin button 3. next screen appear with question "People will call you using .......you like to use

  • Is there a way to enable the PDF filename to be saved over (replaced) after the document has been saved once?

    Once a person has saved a fillable PDF onto their computer and entered information, closed the document, then reopens to add more information, they get an error message from Adobe Reader saying, "The document could not be saved.  Cannot save to this

  • My brushes look pixelated. What's going on?

    I started Ps today and when I used the default soft round brush, it looked like this. The other brushes also look similar, like pixelated.

  • Two axes CO-PA report by report painter

    Dear CO-PA gurus I'd like to create CO-PA report on KE30 with two axes. My image is as attached. But, when I create form, I cannot show multiple characteristics in lead column. Please let me know how to create. Yoshi

  • Why can't I reinstall Adobe CS in my iMac

    I have 2 iMac G5's both running Snow Leopard 10.6.8. Suddenly one decided that it woud not allow Photoshop 9 (CS1) to work so I tried to reinstall. It seems to reinstall but will still not save files. Tried to reinstall  Photoshop CS2, and the whole