Unknown status of package

I place an order last Wednesday for Drakengard 3 (Pre-owned) and still have yet to receive it. According to both the Best Buy and UPS tracking status, UPS delivered the package to the wrong local post office, and it should have been shipped to the correct local post office and delivered yesterday June 3rd. I still have not received the package and do not know whether the post office has lost my package or not.
Is there any way to find out the status of the package now that it's involved in this messy situation with USPS?
Thanks

Hello rnadal,
It is discouraging to hear that you may be encountering issues with receiving your pre-owned copy of Drakengard 3. Typically ordering and shipping is a painless process, and I apologize for any frustration that you may be enduring.
Using the information you registered with the forum, I was able to locate your order and review the tracking details. Presently, it seems that USPS is transferring it to the appropriate post office so that it may be delivered to you. While I do see that the estimate delivery date, I also see that the post offices seem to still be transferring your package to the correct facility.
With that said, I would encourage you to reach out to your local post office for an update on this package. If you should continue to have trouble with this package delivery, please feel welcome tor each out to us.
Regards,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Similar Messages

Internal Order: Interface trip stop: ERROR: unknown status = ''

Hello,
I have completed the setups for Internal orders:(the two orgs are within the same Operating unit, transfer method: direct)
I am able to
1. Create internal requisition
2. Import Order
3. Book, Pick Release and Submit ship confirm
Now, the interface trip stop ( the inventory interface part) The status changes to shipped in Shipping transactions.
The log file does not have an explicit error message. Posting truncated error message below. In more than one place, the following
vague error messages appear.
ERROR: unknown status = ''
X_MASTER_STATUS ==> ERROR
"Calling program unit WSH_DSNO.SUBMIT_TRIP_STOP
Entering WSH_DSNO.SUBMIT_TRIP_STOP () (09/27/2006 09:11:09 PM)
P_TRIP_STOP_ID ==> 4677
PROCESSING DSNO IN TRIP STOP 4677
RLM INSTALLED: YES
Calling program unit RLM_TPA_SV.UPDATECUMKEY
CHECKING EDI INSTALLATION STATUS
EDI INSTALLED: YES
DSNO PROFILE: ENABLED
No Eligible Delivery for the DSNO
Terminating program
INTERFACETRIPSTOP: RESULT OF DSNO SUBMISSION FOR STOP_ID 4677 =
Entering WSH_SHIP_CONFIRM_ACTIONS.UPDATE_COMPLETION_STATUS (WSHDDSHB.pls 115.310.11510.3) (09/27/2006 09:11:10 PM)
p_num_stops ==> 1
p_batch_id ==> is NULL
X_MASTER_STATUS ==> NORMAL
P_API_STATUS ==>
X_NORMAL_COUNT ==> 0
X_WARNING_COUNT ==> 0
X_INTERFACED_COUNT ==> 0
ERROR: unknown status = ''
X_MASTER_STATUS ==> ERROR
P_API_STATUS ==>
X_NORMAL_COUNT ==> 0
X_WARNING_COUNT ==> 0
X_INTERFACED_COUNT ==> 0
Exiting WSH_SHIP_CONFIRM_ACTIONS.UPDATE_COMPLETION_STATUS (09/27/2006 09:11:10 PM, .01 seconds)
l_api_completion_status ==> INTERFACED
l_previous_interface ==> TRUE
Your help is greatly appreciated.
Thank You,
Somnath Subramanyam

Hi somnath,
U have enabled the DSNO (departure Ship notice outbound) in the profile option
ECE_DSNO_ENABLED = yes. (through your log file)
You go to e-commerce gateway responsibility --> go to setup --> profile option --> query this profile option and Change to no and then try again.
Regards,
Prasad

Phones showing unknown status but check physically the phones are registered ok

Hi,
Would like to know the following,
The publisher and subscriber both show the phones of one particular cluster showing all the phones in unknown status but if we checked them physically the phones are registered well and able to make calls and received calls
Both of the version are 7.1
Thanks
Alan

Aditya
Thanks for your response.
There are 5 nodes in the cluster ( 1Pub + 4Sub).
Phones are registered with subscriber.
If I login the subscriber web page, the status showing registered. But if I login Publisher web page the status showing unknown. Phones are Physically registered. I restarted the RIS service but no use. DB replication status showing 2.
Thanks
Venkkatesh.L

How to find the status of package (valid/invalid) was at a particular time

How to find the status of package (valid/invalid) was at a particular time ?
I want to find the status of one oracle package at 3pm yesterday. The status of this package today is INVALID.
I am sure it was VALID yesterday. But no way to prove it. Can any one help please???
I can generate AWR report for last 7 days...

Try using a flashback query, like this:
select object_name, object_type, status
from dba_objects AS OF TIMESTAMP (SYSTIMESTAMP - INTERVAL '18' HOUR) -- 18 hours ago
where object_name = 'MY_OBJECT'
;if you haven't granted FLASHBACK privs, you may need to connect as SYS to do a flashback query on a data dictionary table.
But this should give you the info you need - if it's still in undo.

Intermittant "Unknown Status" for POA and MTA

Hello,
I'm getting intermittent "Unknown Status" in my GroupWise monitor for both my MTA and POA for a certain location. When I check the console for these two agents, they look just fine...
The box running GroupWise monitor is on the same physical location as the MTA and POA that is having the issue.
All of my other MTA and POA's at our primary remote location are just fine.
I've already verified that the SNMP strings are correct - they are identical to the working MTAs and POAs...
If there isn't a way to repair this issue, could someone please come up with a way from preventing "Unknown Status" messages from making it to my inbox? I've already tweaked the "Minimum Threshold level for notiifcation" to critical, yet it continues to "SPAM" me with "Unknown Status" messages...
If there isn't a way to "tune it out" of monitor, then I guess I'll just go ahead and make a rule in my GroupWise client to "move to trash" any "unknown status" messages... At least that will allow me to see any notifications of real problems...
Thanks! :)

wspotkaeff,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

One gwia in unknown status

I still have one gwia that is unknown status in monitor, other 5 gwias that
are configured the same are being monitored. What else can I check ?

Tim,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

2540 Battery Unknown status

Hi all,
Did anyone encounter STK 2540 Battery becomes unknown status? I don't know why the last learn cycle is 1970 year! Placing a call and tried to change with a new Battery, but it becomes Unknown too after charging about 10-15min. Anyone has a passcode to enter engineer mode console to reset the time?
Battery Tray.85.Battery.A has expired.
Automatic Age Reset: False
Availability: Unknown
Battery Age: 10803 Days
Battery Type: Dual Individual FRU
Caption: Battery
Description: Cache Battery
Element Name: Tray.85.Battery.A
Element Status: Unknown
Enabled State: Unknown
Last Learn Cycle: Thu Jan 01 08:00:00 CST 1970
Learn Interval (Weeks): 13
Life Remaining: 0 Days
Name: Tray.85.Battery.A
Next Learn Cycle: Fri Apr 21 13:59:50 CST 2000
Physical ID: SUN.371-2482-01.1T72304407PS
Status: Unknown

hi
i have got a new battery from SUN support, but the status is still Unknown, do you know how long does it need to be fully charged?
== majorEventLog.txt ==
Date/Time: Thu Jan 15 19:26:55 HKT 2009
Sequence number: 3086
Event type: 211C
Event category: Notification
Priority: Informational
Description: Cache battery is charging
Event specific codes: 0/0/0
Component type: Battery
Component location: tray85
Logged by: Controller in slot B
=====
== current status ==
Automatic Age Reset: False
Availability: Unknown
Battery Age: 14230 Days
Battery Type: Dual Individual FRU
Caption: Battery
Description: Cache Battery
Element Name: Tray.85.Battery.B
Element Status: Unknown
Enabled State: Unknown
Last Learn Cycle: Wed Jan 14 15:01:52 HKT 2009
Learn Interval (Weeks): 13
Life Remaining: 0 Days
Name: Tray.85.Battery.B
Next Learn Cycle: Fri Apr 10 13:59:50 HKT 2009
Physical ID: SUN.371-2482-01.SY82593656SA
Status: Unknown

Unknown Status: the dependency service or group failed to start AFTER upgrading to WIN10

EDITED: Need some help with SATELLITE P50-BP/N: PSPNSU-00M004 First, after upgrading to win10, the bluetooth stopped working.did play around the device manager, checked the intel wireless 7260 driver and found a USB decriptor error.after thinking and eating and drinking, I thought that maybe I need to install the latest chipset driver for win8.Download the driver from intel's website. . . . . . then pooof bluetooth started to work again..... NOW..... Another problem came in, function keys stopped working but only from f1-f4. I reinstalled TVAP and good, my keys are back. Then another one came in, my wifi stopped working saying it has Unknown Status. so I see now this message that the dependency failed to start. tried to runnetsh winsock reset

EDITED: Need some help with SATELLITE P50-BP/N: PSPNSU-00M004 First, after upgrading to win10, the bluetooth stopped working.did play around the device manager, checked the intel wireless 7260 driver and found a USB decriptor error.after thinking and eating and drinking, I thought that maybe I need to install the latest chipset driver for win8.Download the driver from intel's website. . . . . . then pooof bluetooth started to work again..... NOW..... Another problem came in, function keys stopped working but only from f1-f4. I reinstalled TVAP and good, my keys are back. Then another one came in, my wifi stopped working saying it has Unknown Status. so I see now this message that the dependency failed to start. tried to runnetsh winsock reset

Custom Warning/Error status on Packages

Hi All,
I'm running a custom Stored Procedure which is then linked to a *RUN_STORED_PROCEDURE command in a logic in BPC7 (Microsoft version, SP7). I would like to control the package status from within the stored procedure.
After some tests, I've learned that if I put the string * ERROR * into a new line in the logfile, the package will interprete this as a keyword and correctly set the completion status to Error. I haven't been quite succesful with the warning messages though. I've tried several combinations without success:
WARNING *
Warning : Warning message
etc.
Has anyone done this before?
Thanks,
Ibai Madariaga

Hi Mihaela,
Thanks for your tip. Anyway I've just realized that even when the System Stored Procedures run ( SPRUNCALCACCOUNT, SPRUNCONVERSION, ...) when a warning is happening in the log file, the actual status on the packages is set to Completed. I tried some combinations with the [W] keyword but I'm not sure how to use it.
For the time being, we've agreed that we will show this messages with an error status, even if that implies some additional modifications to the package, i.e. not aborting the following tasks even if the Stored procedure has failed ...
Please, I would appreciate if you pointed me into the correct direction (either if there is some documentation on this) or which steps did you follow to change the status.
Kind regards,
Ibai Madariaga

BPC Security: User should only see status of packages started by himself

Dear Experts,
we have the users run packages to perform their planning process and we also trained them to check their package status so they know when to go on within the process. Until now we have not had a very intelligent security management since it's only a pilot system with a few pilot countries. Everybody had full_tsk profile. But now it should get a llittle more restrictive. Very important in the first place is, that the user only sees his own package. If he can see other user's packages this would meen he can see copied values too within the protocol but thats very sensitive data.
I cannot find a security setting that helps me here. Do you have any hints for me?
Thanx in advance,
regards,
Cora

Sorry to confirm that security does not limit the visibility to the individual DM logs. There is a filter capability however that could be taught to your users.
Please include your request on the BPC page at SAP Idea place. See the top of this forum for more information.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Workflow Analyzer shows unknown status for workflows and trace disabled

Some servers monitored by SCOM are affected by the issue where I cannot trace workflows with Analyzer. Statuses are showing as unknown, trace is disabled. If an agent cache is flushed and health service is restarted it works for a first session showing only
some IIS workflows.
Can it be fixed somehow?
Guntars Svilpe

<ProbeActionModuleType ID="Microsoft.SystemCenter.GetWorkflowsReportProbe" Comment="requests list of running or failed workflows for management group/instance" Accessibility="Public" Batching="false" PassThrough="false">
<Configuration><xsd:element name="ManagementGroupId" type="xsd:string" xmlns:xsd="http://www.w3.org/2001/XMLSchema" /><xsd:element name="ManagedEntityId" type="xsd:string" minOccurs="0" maxOccurs="1" xmlns:xsd="http://www.w3.org/2001/XMLSchema"
/><xsd:element name="Status" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><xsd:simpleType><xsd:restriction base="xsd:string"><xsd:enumeration value="Failed" /><xsd:enumeration value="Running" /></xsd:restriction></xsd:simpleType></xsd:element></Configuration>
<ModuleImplementation Isolation="Any">
<Native>
<ClassID>A580661D-6314-4FB5-AD54-6ECBAFD83230</ClassID>
</Native>
</ModuleImplementation>
<OutputType>System!System.BaseData</OutputType>
<InputType>System!System.BaseData</InputType>
</ProbeActionModuleType>
<ClassID>A580661D-6314-4FB5-AD54-6ECBAFD83230</ClassID> Is it a black box?
Guntars Svilpe

ORA-12514 and UNKNOWN status

Hi,
on 10.2.0.3 on Win can not connect to DB by :
sqlplus user/password@MYDB
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor.
lsnrctl status gives :
Service "MyDB.server.LOCAL" has 1 instance(s).
Instance "MYDB", status UNKNOWN, has 1 handler(s) for this service..
But tnsping MYDB is OK.
I can connect with :
set ORACLE_SID=MYDB
sqlplus / as sysdba
Any idea ?
Thank you.

user10274093 wrote:
Realy thank you.
Here they are :
lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.3.0 - Production on 21-AUG-2013 17:18:19
Copyright (c) 1991, 2006, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.29.116.4)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.3.0 - Production
Start Date                21-AUG-2013 16:34:39
Uptime                    0 days 0 hr. 43 min. 40 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   D:\oracle\network\admin\listener.ora
Listener Log File         D:\oracle\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.39.116.4)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "MYDB.SERVERDOMAIN.LOCAL" has 1 instance(s).
Instance "MYDB", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.39.116.4)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "MYDB.serverdomaine.LOCAL" has 1 instance(s).
Instance "MYDB", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
The command completed successfully
Since every connection request to the listener gets logged, listener.log file will contain a line with 12514 as status code.
T21-AOÛT -2013 17:18:19 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=user))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169870080)) * status * 0
21-AOÛT -2013 17:20:09 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=user))(COMMAND=services)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169870080)) * services * 0
21-AOÛT -2013 17:23:16 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=MYDB)(CID=(PROGRAM=D:\oracle\bin\sqlplus.exe)(HOST=SERVER)(USER=_syadministrator))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.39.116.4)(PORT=3033)) * establish * MYDB * 12514
TNS-12514: TNS : listener does not currently know of service requested in connect descriptor
connection request was for "MYDB" service but listener only know about service name below
>Service "MYDB.serverdomaine.LOCAL" has 1 instance(s).
which is NOT named "MYDB"!
so either change listener or change requested Service name so they match each other!

1 objects have error /ignore/execute or unknown status in the taskline

hi all,
i m installing sap ides ecc 6 in win2k3-ee-srv. one error occurred at the end of 'import abap':
Not all objects are successfully processed.
DIAGNOSIS:For details see output file with invalid objects invalid_objects.txt and log file object_checker.log
SOLUTION:Normally it indicates the data load error but in some special cases(for example if some objects were created or loaded externally) you can press OK to continue.
i've read the log files, there is a package name SAPDFACT and the object ?N listed in the invalid_objects.txt.
i pressed OK, and the installation continues and past the 'import abap' step
have anyone encountered such kind of prob.plz do give me some indication.
any response will be awarded!
thanks a lot,
smason
Edited by: Samson Zhu on Feb 25, 2008 11:42 AM

Dear smason,
I had the same warning and I pressed OK as well to continue installation.
But, Now I am getting error on phase 27/45 (Start central instance) that
"Connect to message server (ides/3901) failed: NIECONN_REFUSED"
I am still not able to resolve this isse. Did you get the same issue, if yes how did you solve it.
I am also using Windows 2003/Oracle on a single laptop with 2GB RAM and USB hard disks of sufficient size.
Regards
Sohaib

MTA Unknown Status - Not Listening

Recently we installed GroupWise monitor on the same server as the MTA.
When I go to view the monitor webpage all the components (pos, gwia, webacc) all show green and happy, but the MTA shows the "Not Listening" status. Here's the fun part.
When monitoring the MTA using the MTA console everything looks fine.
However, when you click on the "Not Listening" link in GroupWise monitor it shows the MTA's address as the old Netware server's address that we migrated from. Hence the "Not Listening" status. Not sure why the old address is showing. I've looked all through the startup files for the post offices, MTA, GWIA and Webacc for anything that might reference the old MTA's ip address, but couldn't find anything.
It's really not a big deal since we can monitor it via the MTA's console, but it would be nice to have it available in the GroupWise monitor page so we can set traps, notifications, etc, etc.
Is there anyway I can fix this?

I will attempt to make a backup of the main DB and then rebuild it and then the POAs afterwards and see if that fixes anything. On another note... do you think that bad link information in the databases could be causing the post offices and webmail agents to just randomly quit once or twice daily. We've been having this issue since we upgraded to GW8. It may be another issue completely. Just curious what your thoughts were.
Originally Posted by aaronm04
I think this is your problem. It appears that somewhere in one of your GW domain databases, the old address still exists. If your POA won't connect w/o that switch, then the bad IP info is coming from the GW DB. If you find that and fix it, I would think GWMonitor would follow suit.
Is this your primary domain? Is it the parent of the GWMonitor object/app? If you have multiple domains, connect ConsoleOne to each one and verify the IP of the object in the MTA (not domain) properties. You might even consider a rebuild of the domain. If the child POs still don't connect w/o that switch (after you've verified the correct address in the MTA), you might consider rebuilding them too. They either aren't getting the updated info from the domain or the domain doesn't have the right info to begin with.
Report back what you find.
Aaron

Unknown status icon

This afternoon a previously unseen status icon appeared on my iPone next tothe battery status icon. It rather looks like a telehone handset over two rows of white dots, 4 in the top row and 3 in the bottom row. This icon does not appear to be listed in the iPhone manual.
Does anyone knwo what this is or why it has suddenly appeared?

That's the TTY indicator. Go into Settings > Phone and turn TTY off.

Unknown status of package

Similar Messages

Maybe you are looking for