Unknown Symbols

Hi,
While processing some files, we do encounter some unknown symbols which due to this XI doesn't process the files.
It was a hard task for us to check each individual line item to look for any unusual symbols.
I spent one hour to check a file of 10000 records by splitting and executing it in XI.
Is there any easy way of finding these unknown symbols or some interpreters to do this.
We have a .csv files which had these symbols.
Regards
Krish

Hi Krish,
As already prateek mentioned until unless you know in which encoding they fall into you can make a decision. So based upon a few characters see in wihch encoding they are falling and use it accordingly.
Regards,
---Satish

Similar Messages

An Unknown Symbol !! Does Anyone See This Icon On The Status Bar ?

Hello Everyone;
I Have a SonyEricsson T650i with IRANCELL Network , After Months Yesterday night an unknown symbol turns on , on the status bar. you can see it in the picture...
I Try To Turn Off And On The Phone many times but No Changes.
I Never seen this symbol before and I Tried to google it for all sonyericsson symbols and i can't find anything.
I have downloaded the T650i's User Guid and there's nothing special about this too.
If you know something about this please help me , its very important to me.
please attach a link for more information.
thanks
PaSHa
Attachments:
22022011020.jpg ‏134 KB

The icon you see is indicating that a handsfree is connected to the phone. If you have not connected a handsfree and still get this icon I suggest that you update the phone software using the Update Service program. If you have not installed Update Service on your PC, you can download it from here.
www.sonyericsson.com/updateservice
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Doubt in script(Unknown symbol)

Hi,
I am gettin error in scripts(Unknown symbol l_vtweg).
In print program I have used this variable.
select single vtweg from dic table into l_vtweg
where cond.
then y I am geting this error? any idea plz?
Regards
Divakar

Runtime errors occur if the declared data type is unknown; if the length of the declared data type does not match the type of the assigned field and if the alignments are incompatible.
Regards
Vivek
reward points if this helps

HP Deskjet 3052A printing English in unknown symbols

I was using my HP Windows 7 Home Premium Laptop to search a web site for a schedule of events. I tried to print the schedule and when the printing was complete, the schedule that I viewed in English was printed in some unknown symbols. I printed it a second time after disconnecting and reconnecting the printer. I printed the English version again, this time it was in a different set of unknown symbols. HELP!
I have not tried to print anything in several weeks. My printer was working fine before.

Hello ECM310,
Welcome to the HP Forums!
I understand when you try to print a schedule of events, it prints out with symbols. I will do my best to assist you! How is this printer connected? Wireless or USB?
Could you try printing from Notepad on your computer to verify if you're experiencing this different symbols?
I would recommend following this HP document on Continuous Pages of Strange or Garbled Characters Print in Windows. (This is only for a USB connection.)
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP.

[SOLVED] Unknown symbol usb_serial_*

Hi,
I'm trying use a module that serializes wishbone protocol over usb... The point is that I have added this module in Ubuntu distros without problems, but my Arch box is complaining:
[16028.668549] usb 4-3: new high-speed USB device number 10 using ehci-pci
[16028.795091] cdc_acm 4-3:1.0: This device cannot do calls on its own. It is not a modem.
[16028.795135] cdc_acm 4-3:1.0: ttyACM0: USB ACM device
[16069.350014] wishbone_serial: Unknown symbol usb_serial_generic_open (err 0)
[16069.350026] wishbone_serial: Unknown symbol usb_serial_generic_close (err 0)
[16069.350046] wishbone_serial: Unknown symbol usb_serial_deregister_drivers (err 0)
[16069.350055] wishbone_serial: Unknown symbol usb_serial_register_drivers (err 0)
well, all this calls are indeed in the kernel src linux/drivers/usb, but I don't see that the archlinux this usb-serial driver has...
Could you tell me if I'm right?
and current installation:
Linux MrWork 3.9.8-1-ARCH #1 SMP PREEMPT Thu Jun 27 21:37:31 CEST 2013 x86_64 GNU/Linux
Last edited by bradomyn (2013-07-08 09:04:37)

The
depmod -a
did the trick.
man depmod wrote:
Depmod creates a "Makefile"-like dependency file, based on the symbols it finds in the set of modules mentioned on the command line or from the directories specified in the configuration file. This dependency file is later used by modprobe to automatically load the correct module or stack of modules.
/sbin/depmod -a
somewhere in the rc-files in /etc/rc.d, so that the correct module dependencies will be available immediately after booting the system. Note that the option -a is now optional.

SAPSCRIPT :error "unknown symbol adrc-name1"

Hi everyone,
In my driver program, i have fetched data in adrc.
In the sapscript, i have written "&WA_ADRC-NAME1& " in the editor.
While checking the texts, i get the error "Unknown symbol WA_ADRC-NAME1.
Please suggest,
Thanks in Advance.
Regds,
Arpita

Thats just because this fielld is not defined in the script with the DEFINE statement. You are using the work area directly to display the field.
This will come for all the fields not declared in the script.
This will not put any impact on your script.
Regards,
Amit
Reward all helpful replies.

Photosmart printer - pink screen with unknown symbols

After what may have been a power surge, my Photosmart 470 photo printer screen has turned pink with two unknown symbols. Unplugging sometimes returns to a normal screen but no functions, and then returns to the pink screen.

Hi northco,
Welcome to the HP Forums!
I noticed that your HP Photosmart 470 photo printer screen has turned pink with two unknown symbols. Sometimes it will take you to the normal screen, but it will still not function. I am happy to help!
Please try the solutions within this guide. The HP Printer Won't Turn On or Respond When the Power Button is Pressed.
Hope these solutions help, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

ThinkPad T500, HDAPS: tp_smapi: Unknown symbol thinkpad_*

I followed the guide at http://wiki.archlinux.org/index.php/HDAPS, but didn't get further than the tp_smapi section:
# modprobe tp_smapi
FATAL: Error inserting tp_smapi (/lib/modules/2.6.28-ARCH/extra/tp_smapi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
# dmesg | tail -n5
thinkpad_ec: cannot claim IO ports 0x1600-0x161f... consider using force_io=1.
tp_smapi: Unknown symbol thinkpad_ec_unlock
tp_smapi: Unknown symbol thinkpad_ec_invalidate
tp_smapi: Unknown symbol thinkpad_ec_read_row
tp_smapi: Unknown symbol thinkpad_ec_lock
# ll /sys/devices/platform/smapi
ls: cannot access /sys/devices/platform/smapi: No such file or directory
# ll /dev/js
ls: cannot access /dev/js: No such file or directory
What's wrong?

The module thinkpad_ec has to be loaded before you can use tp_smapi,
but it refuses to load on your system becaue it can't claim certain IO ports.
You can force thinkpad_ec to claim the ports with modprobe thinkpad_ec force_io=1,
and to make it permanent you can add options thinkpad_ec force_io=1 to /etc/modprobe.d/options.
Edit: I have to tell thinkpad_ec to force claiming the ports on my system as well (Lenovo ThinkPad X200)
and so far I haven't had any problems with it, but there's no guarantee it'll work on your system. Just try.
Last edited by csstaub (2009-03-21 13:46:47)

Asusfan 0.5.0 - Unknown symbol __udivdi3

Hi,
as of recently my fan control driver for my asus a8jp laptop stopped working,
looking for a cure I found there is a new version @ googlecode, I compiled but it gives me "Unknown symbol __udivdi3"
does anyone have a clue what this could mean ?
http://pastebin.com/m507f5b7c
would be the 0.5.0 source code

birdspider wrote:does anyone have a clue what this could mean ?
As I met the same problem, Google tells me that this is a 64/32 bit thing. Change the line
tmp = (out_obj.integer.value-2732)/10;
to
tmp = ((unsigned long)(out_obj.integer.value-2732))/10;
in asus_fan.c.
HTH

[solved] thinkpad_acpi : Unknown symbol in module

Hello,
Recently I have problem with thinkpad_acpi which dont load anymore :
1:07 thomas@laptom ~% sudo modprobe thinkpad_acpi
FATAL: Error inserting thinkpad_acpi (/lib/modules/2.6.35-ARCH/kernel/drivers/platform/x86/thinkpad_acpi.ko): Unknown symbol in module, or unknown parameter (see dmesg)
zsh: exit 1 sudo modprobe thinkpad_acpi
and dmesg says :
thinkpad_acpi: Unknown symbol snd_ctl_add (err 0)
thinkpad_acpi: Unknown symbol snd_card_register (err 0)
thinkpad_acpi: Unknown symbol snd_card_free (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_new1 (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_boolean_mono_info (err 0)
thinkpad_acpi: Unknown symbol snd_ctl_notify (err 0)
thinkpad_acpi: Unknown symbol snd_card_create (err 0)
But I can't if it came with my kernel update or my recent migration to OSS
1:07 thomas@laptom ~% uname -a
Linux laptom 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686 Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz GenuineIntel GNU/Linux
If you have any suggestion, please let me know
thanks
Last edited by Eidos (2010-11-06 16:31:02)

I got the same problem here. I'm running arch64 on a X201 (linux 3.0).
"modprobe thinkpad_acpi" and dmesg give me exactly the same as Eidos already wrote (see above).
What I tried: reinstall the kernel (stock one from core). Effect: modprobe works! But, sadly, after next boot the same error occurs! Reinstalling will work again, but that's not the way to go, is it?
I don't know what to do... Can someone help?

Elements 11 - Unknown Symbol on Image

What does the five sided figure [shape] at the bottom right hand corner of an image mean?

Can you post a screenshot? You will need to come to the forum to do that. Here's the URL for this thread, then click the camera icon above the message reply area to attach the screenshot:
Elements 11 - Unknown Symbol on Image

IPhone4S display unknown symbol when use USSD

please when i used iPhone4S display unknown symbol when use USSD ???
NOT : i dont know why cose as same time i have iphone 4 and used same carrier but its WORK FINE AND show ussd

iPhones no officially support USSD but I can sure it is support USSD because my friend's iPhone is work with USSD.
I and my friend using same carrier same iPhone4S same codes,no JB but my friend's iPhone is work with USSD,only my iPhone cannot work with USSD.
Thank for all answer,no need answer for me already because I just now send to apple store,they check is phone problem,so now claim warranty,need to wait 2 week to get back new iPhone =.="

Message Unknown symbol

hi all,
I am working on script related to PO.
in SAP PC editor some of fields from table ekpo are working but for
some fields this message is coming Unknown symbol WA_EKPO-MTART WA_EKPO-TXZ01 ETC
I Just doing TEXT-CHECK
Query is why for some fields this is showing like this message but same time other are working
Thanks

regarding my query code syntex is
/E   EL
IT   <K>      Material &WA_EK
/:   IF &WA_EKPO-REVLV& NE ' '
=    /&WA_EKPO-REVLV&
/:   ENDIF
/*    &EKPO-MATNR&
/:   IF &WA_EKPO-TXZ01& NE ' '
=    <K> &WA_EKPO-TXZ01&
/:   ENDIF
here   Unknown symbol is &WA_EKPO-TXZ01&
except this code
/:   IF &WA_EKPO-TXZ01& NE ' '
=    <K> &WA_EKPO-TXZ01&
/:   ENDIF
all is working fine.
when i remove WA like EKPO-TXZ01 script is showing no message but not picking data for EKPO-TXZ01
thanks

Unknown Symbol SKIP_IND

I'm getting an error Unknown symbol. See Below:
Number of errors: 1
/: IF &SKIP_IND& = 'X'.
    Unknown symbol SKIP_IND
/: ENDIF.
CL ,,&WA_ITCHAR-ATNAM&,,&WA_ITCHAR-ATWRT&
Other variables defined work fine. This variable isn't recognized and doesn't pass a value. Code is below:
(Definition in FZ06PTOP)
DATA: skip_ind(1) TYPE c.    " Indicates SAP Script to print blank line
(From form in FZ06PF02_AUSGABE_POS)
      LOOP AT ichar
        INTO wa_itchar.
        IF SY-TABIX = 1.
          skip_ind = 'X'.
        ELSE.
          CLEAR skip_ind.
        ENDIF.
        CALL FUNCTION 'WRITE_FORM'
              EXPORTING ELEMENT = 'MATL_CHAR_LN'
              EXCEPTIONS OTHERS = 01.
      ENDLOOP.
(From ZMEDRUCK within element 'MATL_CHAR_LN')
/E MATL_CHAR_LN
/: IF &SKIP_IND& = 'X'.
/: ENDIF.
CL ,,&WA_ITCHAR-ATNAM&,,&WA_ITCHAR-ATWRT&
Does anyone know what needs to be done?
Thanks,
Gary M. Fee

HI Gary,
that was a good question... i am also not sure abt the correct answer but i believe the write_form carry only structures than variables.
if u dont want to add a skip_ind field in internal table ichar then u can use subroutine in script.
<b>/: perform test in program zprogram
/: USING &WA_ICHAR-ATNAM&
/: changing &skip_indi&
/: endperform
in program..
DATA COUNT TYPE I.
form test TABLES tab_in STRUCTURE itcsy
tab_out STRUCTURE itcsy.
DATA : skip_ind type boolean.
READ TABLE tab_in WITH KEY 'WA_ICHAR-ATNAM'.
IF sy-subrc = 0.
COUNT = COUNT + 1.
IF COUNT = 1.
SKIP_IND = 'X'.
READ TABLE tab_out WITH KEY 'SKIP_INDI'.
IF sy-subrc = 0.
tab_out-value = SKIP_IND.
ENDIF.
MODIFY tab_out INDEX sy-tabix.
ELSE.
CLEAR SKIP_IND.
ENDIF.
ENDFORM.</b>
Pls close the thread if problem is solved, and reward to all helpful answers.
Regards
SAB

Error "unknown symbol lookup_one_len_nd" on boot

I've just built a new 2.6.22 kernel using the ABS method from the wiki along with the config file taken from the stock 2.6.22 pacman kernel (the one from /proc/config.gz).
All built ok and the modules installed but on reboot I get the following error:
reiserfs: Unknown symbol lookup_one_len_nd
kinit: Cannot open root device hda5(3,5)
kinit: init not found!
Kernel panic
My root partition is reiserfs and I've checked that there is a resierfs module in the new modules directory.
The only mention that I can find about this error refers to a patch which adds a new struct to fs/namei.c .
I didn't think I would need to patch the standard kernel sources just to get them to boot.
Can anyone help?

Thank you for the comment fphillips. Reinstalling GTK2, which I tried earlier, doesn't seem to have any effect.
I had an error with Pacman, which I thought I fixed, but may be the real source of my aforementioned error.
When I (re)installed a package I was receiving the following error:
error: could not open file /var/lib/pacman/local/glibc-2.12.1-2/depends
I created a new file copied from another Arch Linux install, which removed the error, but may not have removed the problem.
Oddly readelf -s /usr/lib/libgdk-x11-2.0.so.0|grep g_source_set_name returns nothing on my functioning netbook, but returns the same output from your post on my broken laptop.
Last edited by filam (2010-10-17 10:30:22)

Unknown Symbols

Similar Messages

Maybe you are looking for