Unknown user in user profile of ST03N

Hi,
We have observed that  there is an unknown user in user profile of ST03N.  This happens every day.
Please let me know if anybody knows where this user comes from?
Best Regards,
Tushar

Hi Markus,
I  can see unknown user in below path :
ST03N-->expert Mode ->workload>Total--->Day-->Select date
below in Analysis View select User and Settlement Statistics -
>user profile
Here users will be listed with reponse time valuesetc. One of the user is unknown.
I did not understand your previous answer.Can you please explain a bit.
Best Regards,
Tushar.

Similar Messages

  • Restore "account unknown" user profile Windows7

    After accidentally remove user and  computer from domain controller (Windows Server 2003), i was create new user with same old name on DC and rejoin my client PC (Windows7) to domain.
    As result i have brand new profile, my old profile i see as: "account unknown"
    How can i restore my old user profile ?

    On Tue, 18 Feb 2014 18:58:11 +0000, SaeedShweiki wrote:
    Inadvertently i have been deleted an "unknown user" in Windows XP
    This forum is for Windows Server security related issues and not for
    Windows XP issues.
    Please repost to one of the forums here:
    http://answers.microsoft.com
    Paul Adare - FIM CM MVP
    "Bother," said Pooh, "Eeyore, ready two photon torpedoes and lock
    phasers on the Heffalump, Piglet, meet me in transporter room three."
    -- Robert Billing

  • User Profile Data for One Month in ST03N

    Dear All,
    I have one question for a similar requirement.
    I want to see the User Profile data for last month (e.g.August)
    I navigate through the same path as described by you.
    ST03N- Expert Mode- Total (select period)-- User Profile (from analysis view)
    even though I have selected One month period (August) ; I could see only the data for one week (1st August to 7th August)
    Can you please advice how can I solve my purpose, if not this time but may be in future I should be able to see complete one month data.
    Thanks in advance.
    Best Regards,
    Jayesh

    Dear Shailesh,
    Thanks for the very prompt and accurate response.
    However we have this job scheduled on monthly basis in our productive system, still there is no data avaialable.
    Kindly advice.
    Best Regards,
    Jayesh

  • Account unknown in user profiles

    On all our domain controllers (server 2003 R2 and 2008) we have found an "account unknown" listed under My computer-properties advance-user profiles-settings. My
    concern is that the Account Unknown profiles shows under all our Domain Controllers in the aforementioned place and it shows that that particular profiles is still being access. By being access I mean that the “Modified” date shows that it was
    modified just a few days ago, and it changes a couple of days. Also, the option to delete the account is grayed out and I can not find any orphaned profiles under documents and Settings.
    What I need to know is if that profile is being use by some system account, or have the servers been compromised.
    Any assistance or clarification of this issue will be greatly appreciated. Thank you.

    Hi,
    A possible cause of the “Account Unknown” profile is that the domain account that the profile is mapped to was deleted but the profile was
    not able to be deleted because some applications or services have open handle on the file. That’s also one of the reasons that the option to delete the account is grayed out.
    I suggest that you have a look at the subkeys under HKEY_USERS key and check if there is any user has been deleted. The HKEY_USERS key lists all profiles
    that are currently loaded on the computer. The PsGetSid utility (http://technet.microsoft.com/en-us/sysinternals/bb897417.aspx) can help you translate SIDs to their display name.
    Meanwhile, you’d better perform a full virus scan to ensure that the computer is not infected by virus.
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can
    be beneficial to other community members reading the thread.

  • Domain User Profiles Unknown??

    I have 6 Panasonic Toughpads and when plugged directly into the network they work fine. However, when disconnected from the network, they will only log into the last user account signed in. when I go to user profiles when connected to the network it shows
    all the user accounts. When I check user profiles while disconnected from the network it shows all profiles as unknown except for the one account I am logged into and the local account on the computer. if I log off after disconnecting the network and try to
    login as someone different it works but if i restart and try to login as someone else it says there are currently no logon servers available, I have to plug into the network sync the profiles and login then again. if i break from the network i cant login as
    any other profile until back on the network. Why aren't the profiles saving?

    Hi TOLITdept,
    We wonder if you are the administrator of your domain.
    "Account Unknown" means that the SID the profile has no longer in Active Directory and some applications or services have open handle on the file; or more simply, the user has been deleted from AD. It is by design. In your case obviously the first
    reason. After restart these account would need be re-verified by domain controller.
    And if you are damain administrator, you also could check if any related group policy has been applied.
    Regards
    D. Wu

  • User Profile Service hangs for unknown reason

    Hi,
    We have a system where usually around 300+ users are logged in simultaneously. These users are working on +-20 Windows Server 2008 R2 Terminal Servers. These servers are in a cluster. We have a physical load balancer. We have a Windows Server 2008 R2 Connection
    Broker. We also have serveral Windows Server 2003 servers, connecting to the same domain controllers, but to a different Farm on the Connection Broker.
    Sometimes, and for us it seems like random times, users start complaining they cannot log on to the servers anymore. The server seems to be hanging on the User Profile Service. Users get the message "Please wait for the User Profile Service". This message
    will stay untill you give the server a hard reset (power off - power on). If we connect to the service from another computer in the domain, we can see which services are started. We can't see any problems, everything seems to be working fine. We just can't
    log on to the server anymore, also not as console. This happens on all our 2008 servers in the farm. If it happens, it is usually to happen on more than 1 server (last week on 7 servers simultaneously). You can imagine how our customers react to this. Users
    who are allready logged in to the servers on which the problems occur do not notice anything, untill they try to log out. Then they also get the message. If we shutdown this machine (some work on VMware, some are physical servers) the hard way (power off /
    power on) the server can work good for several weeks. Then, out of the blue, the problem might occur again.
    We have tried many hotfixes and Windows Updates, we have searched in the DNS system, and disabled the second NIC, but the problem still occurs. We do have mandatory profiles, which are being loaded by the software "Flex Profiles".
    I hope somebody here has some good ideas.
    Thanks in advantage,
    Roy

    Hi Chris,
    First of all, thanks for your reaction. The problem in your link describes almost the same environment as we have. Except that in our case, whenever the "Please wait for the user profile" turns up, nobody is able to log on to that server anymore until reboot.
    In their case, they will be logged on after 60 - 90 seconds. We can't really find an event in the event viewer which seems to be hanging around with the problem.

  • OIM - Error while acessing User Profile History report

    Hello,
    I'm using OIM 9.1.0.2 (on JBoss 4.3.2 GA). In the admin interface when I navigate to Historical reports and click on User Profile History report link, I see a message
    A system error was encountered.
    Contact Oracle Identity Manager System Administrator.
    I see this only in our Test environment. In prod it is working fine. Not sure what is missing:
    In the JBoss logs, I see the below exception.
    The error to note is :
    *Caused by [Nested Exception]:*
    java.sql.SQLException: ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'XL_SP_USERPROFILEHISTORY'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    2010-02-26 09:15:57,176 ERROR (http-0.0.0.0-8080-18) [XELLERATE.APIS] Class/Method: tcReportOperationsBean/getPagedReportData encounter some problems: {1}
    com.thortech.xl.orb.dataaccess.tcDataAccessException
         at com.thortech.xl.dataaccess.tcDataAccessExceptionUtil.createException(Unknown Source)
         at com.thortech.xl.dataaccess.tcDataBase.createException(Unknown Source)
         at com.thortech.xl.dataaccess.tcDataBase.readPartialStoredProcedure(Unknown Source)
         at com.thortech.xl.dataaccess.tcDataBase.readStoredProcedure(Unknown Source)
         at com.thortech.xl.dataobj.CallableStatementUtil.execute(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.ReportOperationsBean.getPagedReportData(Unknown Source)
         at com.thortech.xl.ejb.beans.ReportOperationsSession.getPagedReportData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
         at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
         at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
         at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
         at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
         at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
         at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
         at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
         at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
         at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
         at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
         at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
         at org.jboss.ejb.Container.invoke(Container.java:960)
         at sun.reflect.GeneratedMethodAccessor124.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
         at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
         at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
         at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
         at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
         at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
         at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
         at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
         at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
         at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
         at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
         at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
         at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
         at $Proxy592.getPagedReportData(Unknown Source)
         at Thor.API.Operations.ReportOperationsClient.getPagedReportData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy855.getPagedReportData(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.getReportResultSet(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.displayTabularReport(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.displayReport(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.buildReportInput(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
         at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
         at java.lang.Thread.run(Thread.java:619)
    *Caused by [Nested Exception]:*
    java.sql.SQLException: ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'XL_SP_USERPROFILEHISTORY'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
         at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
         at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
         at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
         at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
         at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
         at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.execute(WrappedPreparedStatement.java:299)
         at com.thortech.xl.dataaccess.tcDataBase.readPartialStoredProcedure(Unknown Source)
         at com.thortech.xl.dataaccess.tcDataBase.readStoredProcedure(Unknown Source)
         at com.thortech.xl.dataobj.CallableStatementUtil.execute(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.ReportOperationsBean.getPagedReportData(Unknown Source)
         at com.thortech.xl.ejb.beans.ReportOperationsSession.getPagedReportData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
         at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
         at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
         at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
         at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
         at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
         at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
         at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
         at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
         at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
         at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
         at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
         at org.jboss.ejb.Container.invoke(Container.java:960)
         at sun.reflect.GeneratedMethodAccessor124.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
         at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
         at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
         at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
         at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
         at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
         at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
         at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
         at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
         at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
         at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
         at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
         at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
         at $Proxy592.getPagedReportData(Unknown Source)
         at Thor.API.Operations.ReportOperationsClient.getPagedReportData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
         at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
         at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
         at $Proxy855.getPagedReportData(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.getReportResultSet(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.displayTabularReport(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.displayReport(Unknown Source)
         at com.thortech.xl.webclient.actions.ReportAction.buildReportInput(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
         at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
         at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
         at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182)
         at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:262)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:446)
         at java.lang.Thread.run(Thread.java:619)
    *2010-02-26 09:15:57,176 ERROR (http-0.0.0.0-8080-18) [XELLERATE.WEBAPP] Class/Method: ReportAction/displayTabularReport encounter some problems: Error executing stored procedure*
    Thor.API.Exceptions.tcAPIException: Error executing stored procedure
         at com.thortech.xl.ejb.beansimpl.ReportOperationsBean.getPagedReportData(Unknown Source)
         at com.thortech.xl.ejb.beans.ReportOperationsSession.getPagedReportData(Unknown Source)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

    Error:
    java.sql.SQLException: ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'XL_SP_USERPROFILEHISTORY'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    Error states that Wrong no of attributes are going. With which user are you running this report ?
    have you see this location : line 1, column 7
    Does anything missing at above position ?

  • "Logon failure: unknown user name or bad password" even with correct Credentials

    I have networked PCs before many times successfully, so this is not my first time trying to network PCs in a home environment. Though I’m wondering if Windows 8.1 is part of the problem. 
    I would have thought that for sure, until one of the new laptops running W8.1 would not connect to any of the other three PCs/Laptops running W8.1. Yet these other three W8.1 PCs/Laptops CAN connect to this laptop. Then it gets a little more interesting:
    this same laptop that couldn’t connect to those three W8.1 PCs/Laptops, CAN connect to a Windows 7 desktop, and a XP Laptop, and those two can also connect back to it without issue. It’s almost like my network is divided in half, and only half can talk to
    each other. But then when I thought it couldn’t get any more interesting, I realized the first three W8.1 PCs/Laptops can talk to the others, it’s just that the others (W8.1 Laptop, W7 Desktop, XP Laptop) can’t talk back to them without getting the error,
    "Logon failure: unknown user name or bad password” even though the username and password are 100% correct.
    I don’t fully understand this error, because on the surface, it’s just WRONG! 
    My username and password are correct, but it appears something somewhere is interfering or hijacking the authentication process. Three of the computers (laptops) are brand new, just purchased last week and setup this week. The HostPC is also fairly new,
    just purchased last month.
    I am not using a HomeGroup, and have removed all computers that were part of a HomeGroup. I have enabled file sharing and network discovery and enabled “Use user accounts and passwords to connect to other computers” on all PCs.
    I have DSL and am using the wireless modem provided by my ISP which has router functionality built into it. It is a Sagemcom Model: F@ST 1704N.
    All computers are connected wirelessly. Time is correct on all PCs. I cannot use Group Policy, since they're all Standard or Home edition. DHCP is enabled and all computers are on the same subnet, using the 192.168.254.x range of ip addresses.
    The six computers are as follows: (I figured this may make is easier to visualize the layout)
    HostPC: HP Desktop W8.1           
    PC Name: DrsBlend
    U/N: DrsBlend  p/w: 123456 (not showing my real password)
    PC1: HP Laptop W8.1
    PC Name: DrsBlend-1
    U/N: DrsBlend    P/W: 123456
    PC2: HP Laptop W8.1
    PC Name: DrsBlend-2
    U/N: DrsBlend    P/W: 123456
    PC3: HP Laptop W8.1
    PC Name: DrsBlend-3
    U/N: DrsBlend    P/W: 123456
    PC4: HP Desktop W7 SP1
    PC Name: DrsBlend-4
    U/N: DrsBlend    P/W: 123456
    PC5: Dell Laptop XP SP3
    PC Name: DrsBlend-5
    U/N: DrsBlend    P/W: 123456
    Every PC stated above has the same user name and password and is logged-in with the username, DrsBlend and the password 123456. The "Logon failure: unknown user name or bad password” happens when trying to access HostPC, PC1, or PC2 from PC3, PC4, or
    PC5.
    The HostPC can see and connect to all the PCs, but only PC1 and PC2 can talk back or access the HostPC. 
    It’s like the HostPC and PC1, and PC2 are in their own little clique, and can talk back and forth to each other. Those three PCs can also talk to PC3, PC4, and PC5 as well, but PC3, PC4, and PC5 cannot talk back to them (HostPC, PC1, PC2).
    Profile corruption? I would have entertained that thought, but the fact the first three PCs can access and talk to one another kind of defeats that idea, and the fact the PCs were just recently setup.
    Firewall? Disabled, and disabled TrendMicro with no change. With them on/off, the first three PCs can still talk to each other and the rest of the PCs.
    Anyone have any additional suggestions?

    Hi，
    How did you connect to other PCs? Do you use RDP to connect to other PCs? If so, check the version of the RDP, as I know, some low version RDP can't connect to higher Windows like 8.1.
    And could you please tell us the detailed information about how the six PCs connect to the home network?
    Can PC1, PC2, PC3 ping back to host PC, PC1 and PC2?
    You can also run command " rundll32.exe keymgr.dll, KRShowKeyMgr " view the credentials stored in your PC,check whether this issue is related with some old credentials stored in your system.
    Yolanda Zhu
    TechNet Community Support

  • "Unknown User" account recovery, Please help

    Hi,
    Inadvertently i have been deleted an "unknown user" from the (System Properties-->User Profiles) this mistake deleted my "Desktop" and "My Document" files and other settings.
    How can i resolve this problem or recover my files, i tried to use (System Restore) tool, but there is "uncompleted restore" message after computer restart.
    Please tell me what to do, it's a critical problem for me :(
    Best regards

    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous steps should be helpful for many similar scenarios.
     If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You can also choose to unmark the answer as you wish.
     In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
     Thanks!
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • User profile service service failed the logon?

    Every time I try to logon to my user account in windows vista home premium, it says :The User Profile Service service Has failed the logon. The User Profile Cannot Be Loaded." The Rest of the accounts on my computer still work fine. But New User Accounts say the same thing. System restore didn't even fix it when i restored back as far as possible. I've scanned for viruses with all security programs that I have, along with system diagnostics, etc. and still nothing. it still did it even after I moved all my  files to another user's folder and deleted my account. I didn't change anything or add or delete anything before it stopped working. When i go to " user profiles" in "System properties" it showed my profile was a backup and unknown profile size. after I deleted my account, it didn't show my profile at all.

    Posts 1
    Windows Vista Home Premium failed logon
    Hi, I have a Dell Inspiron 1720, about 4 weeks old, O S Windows Visa home premium.
    On switching on, my profile picture appears and requests the pass word, on entering the password the following message appears "The user profile service failed logon.User profile cannot be loaded"
    I have searched forums for assistance, but some say to press F8 on boot up I only have an F2 or F12 option on my Inspiron. also I only have one profile on the laptop as some are suggesting log on via guest profile and change settings, but i am unable to do this as i have no guest profile set up. Please help! 

  • IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.

    I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
    IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
    oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
           at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
           at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
           at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
           at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
           at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
           at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
           at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
           at java.lang.reflect.Method.invoke(Unknown Source)
           at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
           at $Proxy2.modifyx(Unknown Source)
           at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
           at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
           at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
           at sun.reflect.DelegatingMethodAccessorImpl.invoke

    THanks for your reply. Here is the snippet from User.xml that contains info about job code.
    <entity-attribute>Job Code</entity-attribute>
    <target-field>usr_job_code</target-field>
    <field name="usr_job_code">
    <type>string</type>
    <required>false</required>
    </field>
    <attribute name="Job Code">
    <type>string</type>
    <required>false</required>
    <searchable>true</searchable>
    <multi-valued>false</multi-valued>
    <MLS>false</MLS>
    <multi-represented>false</multi-represented>
    <attribute-group>Basic</attribute-group>
    <metadata-attachment>
    <metadata>
    <name>multi-valued</name>
    <value>false</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>user-searchable</name>
    <value>true</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>category</name>
    <value>Preferences</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>bulk-updatable</name>
    <value>true</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>read-only</name>
    <value>false</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>visible</name>
    <value>true</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>encryption</name>
    <value>CLEAR</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>display-type</name>
    <value>TEXT</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>system-controlled</name>
    <value>false</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>max-size</name>
    <value>512</value>
    <category>properties</category>
    </metadata>
    <metadata>
    <name>custom</name>
    <value>false</value>
    <category>properties</category>
    </metadata>
    </metadata-attachment>
    </attribute>
    I am able to retrieve the value of the Job Code attribute without any problem with the following code.
    System.out.println("JOB Code: "+user.getAttribute("Job Code"));

  • Accessing an Unknown User account

    Sorry if this is covered I could only find how to get rid on them and I need to access them not get rid of them.
    I had a system crash with a blue screen. When it came back there was only a temp profile loading. In System Properties
    under the tab Advanced button User Profiles
    I have two Unknown Users listed with sizes listed.There is no folder for them under Users nor a listing in the system management in control panel. I cannot find these anywhere I could access them to pull files.
    After some time I switched her  to a local profile because of size limitations on the server and letting the profile rebuilt from the server copy I found that a large chunk of profile went missing. I believe it is in one of these two "Account Unknown"
    users that show in the accounts list where you set to local accounts.
    Problem I have is I don't have a profile folder to pull from. Yet I see this large profile listed.
    My question is there any way I can get into that profile to retrieve those missing files? I have been reading posts about this for days and they are all what are these profiles and how do I make them go away. Well I need into them.
    Hope you can help,
    thank you,
    Ric

    I have tried a data recovery software. I have Data Rescue. It finds all sorts of deleted files. the problems are I have no idea if they are from the missing profile. reason being the profile was not deleted be someone it was dumped after a system crash and
    was gone from the user folder after a reboot from a bluescreen. Now you can see them here and I really need to access them in the profile's structure as it was on the system IE the desktop and DOCUMENT folders and so on.
    Now does someone know how to do that? I have a  screen shot but I have to wait to show it. well the profile the unknown is listed as 2.3GB.
    Also if the fix need to run in other OS I can make it work I'm good a few different ones.
    Thank you anyone that can help.

  • Unknown User Type Error using Add-AzureAccount

    Using the following code in an Azure automation runbook from the Portal (attempting to start a VM):
    workflow VMStart
    $Cred = Get-AutomationPSCredential –Name automationuser
    Add-AzureAccount -Credential $Cred
    Select-AzureSubscription -SubscriptionName "MySubscription"
    Start-AzureVM -ServiceName "MyServiceName" -Name "MyVirtualMachine" -force
    I get the following errors in the Output Pane:
    1/15/2015 4:53:09 PM, Error: Add-AzureAccount : unknown_user_type: Unknown User Type
    At VMStart:7 char:7
    +
    + CategoryInfo : CloseError: (:) [Add-AzureAccount], AadAuthenticationFailedException
    + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.Profile.AddAzureAccount
    1/15/2015 4:53:10 PM, Error: Select-AzureSubscription : The subscription named 'MySubscription' cannot be found. Use Set-AzureSubscription to
    initialize the subscription data.
    Parameter name: name
    At VMStart:9 char:9
    +
    + CategoryInfo : CloseError: (:) [Select-AzureSubscription], ArgumentException
    + FullyQualifiedErrorId : Microsoft.WindowsAzure.Commands.Profile.SelectAzureSubscriptionCommand
    1/15/2015 4:53:10 PM, Error: Start-AzureVM : A parameter cannot be found that matches parameter name 'force'.
    At VMStart:11 char:11
    +
    + CategoryInfo : InvalidArgument: (:) [Start-AzureVM], ParameterBindingException
    + FullyQualifiedErrorId :
    NamedParameterNotFound,Microsoft.WindowsAzure.Commands.ServiceManagement.IaaS.StartAzureVMCommand
    I can't find any information on the "Unknown User Type" error.
    Any ideas?
    Thanks,
    Scott

    Hi Joe -
    I attempted to install the Azure Powershell using the instructions here:
    http://azure.microsoft.com/en-us/documentation/articles/install-configure-powershell/
    Upon completion I was unable to find Azure Powershell from Start/Programs:
    I then attempted to re-install Azure Powershell.  Initially, it came up with the error: "There was an error loading custom feed: 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml'. Error: 'ProductId PHP not found.'."
    I clicked OK and WPI indicated that the Azure Powershell would be installed.  I clicked INSTALL and WPI showed Azure Powershell in the list, but the Total File Download size was 0MB.  I clicked I ACCEPT and it immediately blinked back that Azure
    Powershell was installed.
    When I clicked FINISH, however, the following was displayed:
    Here is the the log file from the latest attempt:
    DownloadManager Information: 0 : Loading product xml from: https://go.microsoft.com/?linkid=9842185
    DownloadManager Information: 0 : https://go.microsoft.com/?linkid=9842185 responded with 302
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 302 Found
    Cache-Control: private
    Content-Length: 175
    Content-Type: text/html; charset=utf-8
    Expires: Fri, 16 Jan 2015 17:18:12 GMT
    Location: https://www.microsoft.com/web/webpi/5.0/webproductlist.xml
    Server: Microsoft-IIS/8.5
    X-AspNet-Version: 2.0.50727
    X-Powered-By: ASP.NET
    Date: Fri, 16 Jan 2015 17:19:11 GMT
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/webproductlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Thu, 15 Jan 2015 19:17:09 GMT
    ETag: "246ac1dbf730d01:0"
    Cache-Control: max-age=280
    Date: Fri, 16 Jan 2015 17:19:12 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\1343597488.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Fri, 17 Oct 2014 12:44:38 GMT
    ETag: "97c9cd1c8eacf1:0"
    Cache-Control: max-age=296
    Date: Fri, 16 Jan 2015 17:19:14 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-97141593.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/webapplicationlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-97141593.xml'
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Thu, 08 May 2014 18:42:31 GMT
    ETag: "26a51545ed6acf1:0"
    Cache-Control: max-age=372
    Date: Fri, 16 Jan 2015 17:19:15 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-230948881.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/mediaproductlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-230948881.xml'
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Tue, 21 Oct 2014 20:26:36 GMT
    ETag: "247eed4f6dedcf1:0"
    Cache-Control: max-age=278
    Date: Fri, 16 Jan 2015 17:19:15 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-1135381691.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-1135381691.xml'
    DownloadManager Information: 0 : Loading product xml from: https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml
    DownloadManager Information: 0 : https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml responded with 304
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 304 Not Modified
    Content-Type: text/xml
    Last-Modified: Thu, 08 May 2014 18:42:32 GMT
    ETag: "8285645ed6acf1:0"
    Cache-Control: max-age=60
    Date: Fri, 16 Jan 2015 17:19:15 GMT
    Connection: keep-alive
    X-CCC: US
    X-CID: 2
    DownloadManager Information: 0 : Remote file has not changed, using local cached file: C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\-1877981721.xml.temp
    DownloadManager Information: 0 : Filtering by current OS
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://www.microsoft.com/web/webpi/5.0/enterpriseproductlist.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\-1877981721.xml'
    DownloadManager Information: 0 : Sucessfully loaded the feed 'https://go.microsoft.com/?linkid=9842185' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\1343597488.xml'
    DownloadManager Information: 0 : Loading product xml from: http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml
    DownloadManager Information: 0 : Content-Encoding header: 'gzip'
    DownloadManager Information: 0 : Number of bytes downloaded over the internet: '14692'
    DownloadManager Information: 0 : Number of bytes after possible decompression: '104283'
    DownloadManager Information: 0 : Failed to load the feed 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\883561549.xml.err'
    DownloadManager Error: 0 : Error loading downloaded product file: 'System.InvalidOperationException: ProductId PHP not found.
    at Microsoft.Web.PlatformInstaller.DependencyProduct.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.DependencyLogicalAnd.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.Product.ResolveIDs()
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXmlInternal(LineInfoDocument xmlDoc, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(LineInfoDocument document, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(String xmlFile, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.Load(Uri productFileUrl, Boolean filterByArchitectureAndOS, Boolean loadEnclosures, Boolean useCachedVersion, String cacheDirectory, Architecture architecture, Int32 osType)'
    DownloadManager Information: 0 : Content-Encoding header: 'gzip'
    DownloadManager Information: 0 : Number of bytes downloaded over the internet: '14692'
    DownloadManager Information: 0 : Number of bytes after possible decompression: '104283'
    DownloadManager Information: 0 : Failed to load the feed 'http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml' after preprocessing, location on disk: 'C:\Users\Scott\AppData\Local\Microsoft\Web Platform Installer\preprocessor\883561549.xml.err'
    DownloadManager Error: 0 : Error loading feed http://www.microsoft.com/web/webpi/2.0/ToolsProductList.xml: System.InvalidOperationException: ProductId PHP not found.
    at Microsoft.Web.PlatformInstaller.DependencyProduct.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.DependencyLogicalAnd.ResolveProductIds(ProductManager pm)
    at Microsoft.Web.PlatformInstaller.Product.ResolveIDs()
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXmlInternal(LineInfoDocument xmlDoc, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(LineInfoDocument document, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadFromXml(String xmlFile, Boolean loadEnclosures)
    at Microsoft.Web.PlatformInstaller.ProductManager.Load(Uri productFileUrl, Boolean filterByArchitectureAndOS, Boolean loadEnclosures, Boolean useCachedVersion, String cacheDirectory, Architecture architecture, Int32 osType)
    at Microsoft.Web.PlatformInstaller.ProductManager.LoadExternalFile(Uri uri)
    at Microsoft.Web.PlatformInstaller.ProductServiceImpl.LoadProducts(String primaryFeed, String[] feeds)
    DownloadManager Information: 0 : Getting ratings file from http://go.microsoft.com/?linkid=9752395
    DownloadManager Information: 0 : Contextual entry products: WindowsAzurePowerShell
    DownloadManager Information: 0 : Adding product Microsoft Azure PowerShell with Microsoft Azure SDK (WindowsAzurePowershell) to cart
    DownloadManager Information: 0 : Contextual navigation to product 'WindowsAzurePowershell'
    DownloadManager Information: 0 : http://go.microsoft.com/?linkid=9752395 responded with 302
    DownloadManager Information: 0 : Response headers:
    HTTP/1.1 302 Found
    Cache-Control: private
    Content-Length: 203
    Content-Type: text/html; charset=utf-8
    Expires: Fri, 16 Jan 2015 17:18:17 GMT
    Location: http://www.microsoft.com/web/handlers/WebPI.ashx?command=getatomfeedwithavgratingquery
    Server: Microsoft-IIS/8.5
    X-AspNet-Version: 2.0.50727
    X-Powered-By: ASP.NET
    Date: Fri, 16 Jan 2015 17:19:16 GMT
    DownloadManager Information: 0 : Content-Encoding header: 'gzip'
    DownloadManager Information: 0 : Number of bytes downloaded over the internet: '22570'
    DownloadManager Information: 0 : Number of bytes after possible decompression: '75392'
    DownloadManager Warning: 0 : Error getting last-modified header, error code: 12150
    DownloadManager Warning: 0 : HttpQueryInfoWithRetry for HTTP_QUERY_LAST_MODIFIED failed.
    DownloadManager Information: 0 : Ratings file loaded successfully
    DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsAzurePowershellOnly does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Dependent product WindowsManagementFramework_86_64 does not apply for current OS / configuration. Not adding
    DownloadManager Information: 0 : Adding product 'WindowsAzurePowershell'
    DownloadManager Information: 0 : Setting current install to 1
    DownloadManager Information: 0 : Starting install sequence
    DownloadManager Information: 0 : Starting EXE command for product 'Microsoft Azure PowerShell with Microsoft Azure SDK'. Commandline is: 'C:\Windows\system32\cmd.exe /C echo noop'. Process Id: 5308
    DownloadManager Information: 0 : Install exit code for product 'Microsoft Azure PowerShell with Microsoft Azure SDK' is '0'
    DownloadManager Information: 0 : Install return code for product 'Microsoft Azure PowerShell with Microsoft Azure SDK' is Success
    DownloadManager Information: 0 : Product Microsoft Azure PowerShell with Microsoft Azure SDK done install completed
    DownloadManager Information: 0 : Increasing current install to 2
    DownloadManager Information: 0 : Product: WindowsAzurePowershell, Install Status: InstallCompleted-Success, Install Time: 00:00:00.0560000
    DownloadManager Information: 0 : Clearing cart
    I did attempt to open the regular Powershell and use the command Get-AzureVM, but the following error was returned:
    The term 'Get-AzureVM' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the
    spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:12
    + Get-AzureVM <<<<
    + CategoryInfo : ObjectNotFound: (Get-AzureVM:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
    Any advice appreciated...
    Thanks,
    Scott

  • EffectiveUserName Logon failure: unknown user name or bad password

    Hi
    I am trying to connect Sharepoint 2013 services (performancepoint , excel services) to SSAS 2012 using the EffectiveUserName.
    I was getting a error message regarding conencting the datasource and when checking profiler it was saying Logon failure: unknown user name or bad password.
    On the SSAS server i tried using EffectiveUserName in the additional Connection Parameters and it failed for the above reason. I also tried my username as well as the sharepoint service account
    the sharepoint service account and my username are both server admins.
    When I try using the EffectiveUserName in the additional Connection Parameters on another server I can connect with no problems.
    What seems to be the different with server where I am getting the error message?
    Regards

    Hi aivoryuk,
    According to your description, you get the "unknown user name or bad password" error when using EffectiveUserName in Connection parameter to connect Analysis Services. Right?
    In this scenario, if you use a connection string to create the data connection, and the connection string contains an effective user field, the EffectiveUserName feature will override the user-supplied effective user value with the system-supplied value.
    On this server, you may use a domain user to run the SSAS. So it will show the "unknown user name or bad password." However, on the other server, it may use system build-in account to run SSAS. Please refer to link below to check the steps for using
    Analysis Services EffectiveUserName in SharePoint Server 2013:
    https://technet.microsoft.com/en-us/library/jj219741(v=office.15).aspx
    If you have any question, please feel free to ask.
    Simon Hou
    TechNet Community Support
    Hi thanks for the link but it just shows how to set effective user name in sharepoint which I know how to do.
    In SSMS and when I connect to the SSAS server and I select options and then I go to the addional connection parameters tab i set Effectivename ="domain\username" on once server I get the error mesage but on the other I don't.
    I'm not clear from you explanation as to why this is?
    Regards

  • User Profiles Sync - Event Viewer Errors

    While I'm not seeing any actual negative impact on the farm, I constantly get the following errors throughout the day (tied to syncs I believe) and would very much like to remedy them if possible:
    Error type: Critical
    Event ID: 5555
    Task Category: User Profiles
    Failure trying to synch web application <GUID>, ContentDB <GUID> Exception message was System.Data.SqlException: Lock request time out period exceeded.
    Login failed for user '<Domain>\<User>'.
    A severe error occurred on the current command.  The results, if any, should be discarded.
    Error type: Critical
    Event ID: 5555
    Task Category: User Profiles
    Failure trying to synch web application <GUID>, ContentDB <GUID> Exception message was System.InvalidOperationException: Operation is not valid due to the current state of the object.
    Error type: Critical
    Event ID: 6398
    Task Category: Timer
    The Execute method of job definition Microsoft.SharePoint.Administration.SPSqmTimerJobDefinition (ID <GUID>) threw an exception. More information is included below.
    Data is Null.  This method or property cannot be called on Null values.
    Error type: Critical
    Event ID: 6398
    Task Category: Timer
    The Execute method of job definition Microsoft.Office.Server.Administration.UserProfileApplication+LanguageSynchronizationJob (ID <GUID>) threw an exception. More information is included below.
    Lock request time out period exceeded.
    Login failed for user '<Domain>\<User>'
    A sever error occurred on the current command.  The results, if any, should be discarded.
    Error type: Error
    Event ID: 5586
    Task Category: Database
    Unknown SQL Exception 1222 occurred. Additional error information from SQL Server is included below.
    Lock request time out period exceeded.
    Login failed for user '<Domain>\<User>'
    A sever error occurred on the current command.  The results, if any, should be discarded.
    Additionally, the following error appear on the Database side.
    Error type: Information
    Event ID: 18456
    Task Category: Logon
    Login failed for user '<Domain>\<User>'. Reason: An exception was raised while revalidating the login on the connection. Check for previous errors. [CLIENT: <IP>]
    Error type: Error
    Event ID: 18056
    Task Category: Server
    The client was unable to reuse a session with SPID <X>, which had been reset for connection pooling.  The failure ID is 29. This error may have been caused by an earlier operation failing. Check the logs for failed operation immediately before this
    error message.
    I've tried to troubleshoot each of these errors independently hoping that it is one that is causing them all but so far nothing has worked.  The "Login failed" stood out to me the most but that account is the farm account and I've verified
    the credentials and there are no other login failed type errors.  Again, the syncs themselves appear to be successful but these errors always occur.  Any help would be most appreciated.

    And you did the last part also?
    "Finally, and I’m not sure if this is necessary, but I read that you should change timer job “Timer Service Recycle” (Central Administration –> Job Definitions) to run at 06:30 PM.  This last step can be done through Central Administration. 
    After doing this my errors went away.  I did however need to run a full user profile synchronization by going to Central Administration –> Manage Profile Service: SharedServicesSearch_UserProfile –> Start Profile Synchronization"
    Sounds like a good reason, that the timer job runs at the same time as the application pool recycles, thus causing the connection to abort. Then retrying the connection, but a different ID, causing a lock to happen.
    Besides that, it can be hard to say, as setting up the User Profile service application using the Wizard, can do some strange things :/

Maybe you are looking for

  • New mac mini w/HP monitor issues - 1st apple

    just purchased mac mini, hooked up to HPw19e monitor via VGA adapter cable. Montior had previously been greta, now font is fuzzy and can't calibrate to fix. If I get a DVI / HDMI cable to monitor instead, will that help? frustrated - thanks for any h

  • HttpUrlConnection's setRequestProperty() doesn't work

    Hi, I am trying to set the request properties of a HttpUrlConnection to specific settings before I download the given page. however, the response code is 200(OK) for pages that have different property from what I set. For Example, I set connection.se

  • Flash CS3 Play/Stop audio button problem

    I made a play/stop audio button with this youtube tutorial (youtube.com/watch?v=XU6oMEFUFF8) but after the sound is finished I want the play button to show up agian. Here is the actionscript: import flash.events.MouseEvent; play_btn.addEventListener(

  • Is there a working 4gb kit out yet? (THIRD PARTY PLEASE, NOT FROM APPLE)

    is there ANYONE with a legit kit from a brand? there are too many conflicting stories of brands with people who say it works and doesnt work anyone have a real answer?

  • BO XI Enterprise config prep info

    I'm trying to nail down some answers for a client, but running out of time to find this info in the documentation, and would greatly appreciate any full or partial responses to the following. My client would like to install BO XI Enterprise Professio