Unkown error during software update... What's happening?

Last night I set my iphone up for an update. It first decided to backup itself... Which took ages, so I went to sleep leaving the process on.
When I woke up in the morning, it said "Update is failed due to an unkonwn error"... something along those lines anyway.
Now my iphone does not start, itunes does not recognize it as well.
Since I have got it, everyday, I am coming to realize another thing that is wrong with this phone... It really *****! It is the second last worst phone I had ever used in my life, if not the worst!
Itunes never sync properly, it is either my calender or songs that are left out...
Somebody please advice something so it starts to work out...
(For those who don't have an iphone yet; NEVER BUY ONE. IT IS A GREAT HARDWARE BUT SOFTWARE IS HORRIBLE

Hello,
Regarding the error in software update: It just means you lost your internet connection, but it was the fault of something on your side, not Apple's side. Try again later, or better yet, try it somewhere else. Sounds like your internet setup (your router, modem, etc) is having problems.

Similar Messages

  • Error during software update, slow browsing speed and maximum force quits ?

    I have a mac book. Today i was doing software update, it gave me an error "operation could not be completed, connection reset by peer" ? now what does that mean?
    I had recently downloaded open office application which i have deleted it. Further my internet browser are so slow that i feel surfing in stone age.
    Besides, i have seen my system is getting pretty slow and i have to use force quit as some operation do not respond to the request.
    What to do?

    Hello,
    Regarding the error in software update: It just means you lost your internet connection, but it was the fault of something on your side, not Apple's side. Try again later, or better yet, try it somewhere else. Sounds like your internet setup (your router, modem, etc) is having problems.

  • Unexpected Error during Software Update

    Every time I try to do a software update on my macbook, it downloads, then says restart to install updates.
    When I click restart it gets about half way and then says "None of the selected updates could be installed. An unexpected error occurred."
    Please help!!!!

    Which exact update is it?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Ipad stuck at apple during software update

    my iPad is stuck at apple logo during software update … what to do i have important date stored in it

    If the reset doesn't work, you will have to force iPad into Recovery Mode.
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Error message during software updates

    I am constantly receiveing the following error message during software updates. This time it happened with an HP printer update, but it has happened with iTunes and Safari as well. Does anyone know what I need to do?
    The system extension “/System/Library/Extensions/GeneIOUSBCFSubclass.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update
    Thanks!

    Try using Help > Updates from one of your CS6 applications.
    When you return home, you might try uninstalling CS6 and reinstalling it again. It sounds like some stuff may have become corrupted.

  • My apple tv seems to have hung up during the latest software update - what should I do now?

    my apple tv seems to have hung up during the latest software update - what should I do now?
    I have not turned it off but it has been stuck in the same spot for 30 minutes now and I'm not sure what to do next since the screen says to NOT turn it off until done. Please help.

    If it hangs much longer you may need to disconnect and then grab a micro USB to restore through iTunes
    http://support.apple.com/kb/HT4367

  • My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT202157 My Apple TV blocked during software update. What should I do?

    My Apple TV blocked during software update. What should I do?

    You can't do much else besides pull the plug. If it causes further problems you should be able to restore as below:
    Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    On the other hand you may be able to simply start the update again. If however the update continues to fail, you should try the restore routine above.

  • Freezing up during software update

    I just installed loin on one of my hard drives on my early 2008 Mac Pro. During software update the OS either crashes or freezes up.

    I was eventually able to correct the problem. It first started because the phone's battery got completely discharged - thought the USB cable would keep it powered but that wasn't the case.
    Anyway, tried to reboot the phone by removing and reinstalling the battery and the phone would not turn on, so this is how I understood what happened. Disconnected it from the USB cable and got the following message:
    Your BlackBerry® Device Software is updated and you can safely disconnect your device.
    Warnings were encountered during the loading process:
    Application data could not be restored to the device.  The backup data file has been saved to "file name".  You can use the Desktop Software Backup/Restore tool to restore this information.
    Recharged the phone, did the restore and the phone is back to life !
    Cheers,
    Giorgio

  • Throttle CPU utilization during software updates

    Are there any settings to throttle CPU Utilization during software update installation on client computers?  I am deploying updates to test systems currently and noticed that the CPU utilization was being pegged at 100% during the install.  After
    the updates installed, the system returned to normal.

    Also note that ultimately, it is the Windows Update Agent that is installing the update(s) so it's not really within ConfigMgr's scope of control and would happen no matter what method you chose to use to update these systems with Windows Updates which
    leads me to believe these systems have perf issues to begin with. Are they VMs?
    Jason | http://blog.configmgrftw.com

  • In updating my iPod to 6.1.2, I received an error during the update.  Now, ipod is not rebooting.  Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture.  I don't know how to reset so that I can restore my backup

    In updating my iPod to 6.1.2, I received an error during the update.  Now, my ipod is not rebooting.  It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture.  I don't know how to reset so that I can restore from my backup.
    A similar thing happened when I updated the ios on my ipad.  But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My new ipad froze during software update thru itunes. The normal reset tructions do not work and itunes on my pc no longer recognizes my ipad. how do i get past this issue?

    My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?

    See here -
    Recovery Mode
    http://support.apple.com/kb/HT1808
    iPad not showing up in iTunes on a PC
    http://www.apple.com/support/ipad/assistant/itunes/
    iPad not showing up on a Mac
    http://support.apple.com/kb/TS1591

  • HT201210 I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I'M TRYING TO UPDATE TO IOS 6 BUT I KEEP GETTING ERROR MESSAGE sOFTWARE UPDATE fAILED: AN ERROR OCCURRED DOWNLOADING IOS 6

    I Tried for three days to download iOS 6 and kept getting error 1403. I finally went to the apple store and they couldn't figure it out either.
      I finally got it to download and all I did different from the other 100 times was I went into settings and on the Bluetooth setting I put NO.  Not sure if that's what did it but that was the only thing different that I did.

  • LOST MY CONTACT DURING SOFTWARE UPDATE

    I LOST MY CONTACTS DURING SOFTWARE UPDATE A WEEK AGO , TRIED TO RESTORE FROM MY LAST BACK UP HELD ON MAY 16, BUT FAILED , AM EVEN SURE I'V SELECTED ALL DATA BACKUP FOR ANY OF MY PREVIOUS BACKUP , TRIED TO RESTORE FROM ANY BUT FAILED , TRIED THE GMAIL CONTACTS ALSO FAILED , WONDERING WHERE MY CONTACTS I'VE SAVED FOR MORE THEN 10 YEARS ARE GONE ....AM TOTTALY DISSAPOINTED SINCE AM A BLACKBERRY USER SINCE 5 YEARS ,  ALWAYS SUPPORTED  BLACKBERRY AGAINST IPHONE USERS , ALL MY FREINDS ARE NO MORE USING BLACKBERRY AND SWITCHED TO IPHONE OR SAMSUNG , AM HAVING AN EMPTY BBM LIST NOW , BUT  STILL SUPPORTING AND EVEN BOUGHT THE Z10 FIRST WEEK OF RELEASE , I WOULD UNDERSTAND THAT A TECHNICAL PROBLEM HAPPENED DURING THE SOFTWARE UPDATE , BUT CANT UNDERSTAND THE USELESS BACK UP I'VE ALWAYS DOING ! AND THE WORSE IS THAT LAST SOFTWARE UPDATE TURNED THE Z10 TO A WORSE MOBILE.

    Hum, it is worrying...
    So... your contacts seem to be on:
    Gmail,
    your previous backups.
    -Solutions:
    if all your contacts are on Gmail: copy them manually on your device,
    they are a priori all in your backups: wait that Link won't be in Beta anymore, and then restore.
    P.S.:
    You make backups and don't register your contacts on SIM, is it possible ? Personally, I rarely register contacts on SIM. If there is a malware, it can be charged from the SIM to the Phone, this is why.

  • Since upgrading to 6 on my iphone, my notes disappear. They are no longer in the cloud. Also disappear during typing! What's happening?

    Since upgrading to 6 on my iphone, my notes disappear. They are no longer in the cloud. Also disappear during typing! What's happening?

    So you have business contacts that were lost... do you not have these on a Database in some shape or form? Sounds like you need to invest in a RAID1 backup setup for your computer so you dont have this issue in the future.
    As for repairing your problem, sounds like you are going to need to start from scratch at this point or if the data is still on your phone look into a program that can take the information from the phone onto iTunes.

Maybe you are looking for

  • My external drive is not showing up on my time machine backup.

    I have two external drives, one for Time Machine and one for some of my media. I've setup time machine to backup both my internal drive and my external media drive; however, when I enter time machine I do not see the backups for the external drive. A

  • What report is run in SAP to get the DATE on which Users are locked ?

    Hello, What report is run in SAP to get the DATE on which Users are locked ? I have tried with RSUSR200 ,-- last logon ,last password change , but i did not get a option to find the date on which are Users are locked . Can anyone suggest what report

  • QP01 Inspection Plans

    Hi, I am trying to upload inspection plan master data in QP01 tcode. I was given a program in BDC which does the same. but the problem with this program is that....its not updating inspection characteristics after 13th record. line is not getting inc

  • SSAS Cube Browsing Slow

    Hi All, I have noticed that sometimes the cube browsing is slower than usual. Could it be due to the server on which the SSAS is installed being slow at those times? Thanks, Sumit

  • VA05 - error

    Hello We have entered the salesorder with 10 line items. In which first 5 line items are with sales employee A & the next 5 line items are with another sales employee B. When we run VA05 for Sales employee A, the output is showing all the line items.