Unlimited Delivery Indicator in relation with Default values in MIGO screen

What is the relation of 'Unlimited Delivery Indicator' in PO with 'Porposed All Items Indicator' in Default Values of MIGO?
Case:
PO created with quantity 100. GR is done for 100 quantity. If 'Porposed All Items Indicator' is set system allows to receive more than PO quantity in GR.
Its behavior is same as Unlimited Delivery Indicator in PO.

'Porposed All Items Indicator' Indicates that items with quantities of zero are also suggested upon goods receipts with reference to purchase orders.
use:No more goods receipts are expected for items that have a quantity of zero, but they are possible. Items with quantities of zero may occur after partial deliveries or reversals, for example.
You can set this indicator if you often have to enter additional quantities to purchase order items that are already completed.
'Unlimited Delivery Indicator' the delivery quantity is not limited
Regards,
Pramod

Similar Messages

"Unlimited delivery indicator" vs "Delivery completed"

Hi,
if I set in PO creation "Unlimited delivery indicator" and "Delivery completed" in MIGO mvt 101 who wins?
I think unlimited delivery, do you agree with this?
Best regards

Hey,
The delivery completed is used to clear future obligation for the PO.
the unlimited delivery is for the amount of good reciept in compereson to PO
so they are not really conected
you can still post good reciept for a po with delivery completed.
but i'm not sure if you can create a n inbound delivery.

How to preset fields in TA BP with default values

Hi!
I want to fill few fields in transaction BP with default values.
This should be if there`s a new business partner to insert.
If i can do this depending on the selected role it was the best
First i thought on SPA/GPA-parameters ... but then i can`t do it in depence on the selected role.
In customizing i can tell only if a field should be displayed or not, for input or not, ... but no values to insert.
Is here anybody with a good idea for me?
Thanks a lot in advance.
Best regards,
Ingo
Edited by: Ingo Schmökel on Jul 1, 2008 7:20 PM

Hi,
There is one possibility which requires an enhancement of the
BDT event ISDAT and a call to the function module
BUP_BUPA_FIELDVALUES_SET. This means that an ISDAT function module needs to be written (transaction BUS7) which calls the function module BUP_BUPA_FIELDVALUES_SET with the needed values that are to be defaulted. You can read the role value using BUS_PARAMETERS_ISSTA_GET (T_RLTYP).The fields which are possible can be found in the DDIC structure BUSDEFAULT. However this is limited only to the fields inside this structure.
Thanks and warm regards,
Smita.

How to preset fields in a transaction BP with default values

Hi!
I want to fill few fields in transaction BP with default values.
This should be if there`s a new business partner to insert.
If i can do this depending on the selected role it was the best
First i thought on SPA/GPA-parameters ... but then i can`t do it in depence on the selected role.
In customizing i can tell only if a field should be displayed or not, for input or not, ... but no values to insert.
Is here anybody with a good idea for me?
I`ve posted my question first in crm-section but i think here it`s better
Thanks a lot in advance.
Best regards,
Ingo

Hi,
There is one possibility which requires an enhancement of the
BDT event ISDAT and a call to the function module
BUP_BUPA_FIELDVALUES_SET. This means that an ISDAT function module needs to be written (transaction BUS7) which calls the function module BUP_BUPA_FIELDVALUES_SET with the needed values that are to be defaulted. You can read the role value using BUS_PARAMETERS_ISSTA_GET (T_RLTYP).The fields which are possible can be found in the DDIC structure BUSDEFAULT. However this is limited only to the fields inside this structure.
Thanks and warm regards,
Smita.

Portal Forms - How to make a Field with DEFAULT value NON-EDITABLE by Users

I HAVE A FORM WITH A DATE FIELD ON IT WITH DEFAULT VALUE.
THIS IS A TABLE-FIELD.
I WANT THE FIELD TO BE DISPLAYED ON THE FORM BUT NOT TO ALLOW
USERS TO EDIT/CHANGE IT.
HOW CAN I DO THIS?
TKS IN ADVANCE

Hi,
see Re: sequencing problem-Forms
Regards Michael

How to Add column with default value in compress table.

Hi ,
while trying to add column to compressed table with default value i am getting error.
Even i tried no compress command on table still its giivg error that add/drop not allowed on compressed table.
Can anyone help me in this .
Thanks.

Aman wrote:
while trying to add column to compressed table with default value i am getting error.This is clearly explain in the Oracle doc :
"+You cannot add a column with a default value to a compressed table or to a partitioned table containing any compressed partition, unless you first disable compression for the table or partition+"
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#sthref5163
Nicolas.

Initialize some fields in material master with default values

Hi,
I would like to initialize some fields in material master MM01 with default values.
for exemple in the view MRP1 there is a field MRP type I would like to initialize PD in the field as default value.
but when I go to the technical information there is no parameter id that I can use in SU3.
Do you know how I can the initialize the field those don't have parameter ID?
thank
Dede

Dear Glenn,
This is possible in SAP for this use T code MMD1 and create MRP profile and assign this MRP profile while creating material using MM01 in the organisation level put this created MRP profile. The values you maintained in this profile get copied to the material by default.
To maintain MRP profile go to MMD1->give your profile name...........> click on selection screen push button--->give here profile description--->select what MRP field which u want to make fixed one/default. if make fixed later you can not change--
>click on data screen 1 push button and maintain your value and save
sree

FormsCentral - design form : Initialize form field with default value

Hello,
My customer asks me to initialize text fields with default values. Example , Name , email , phone number etc to be displayed by default till it is overwritten by values entered. Could you please guide me how to achieve this ?
Many Thanks,
Sree

Hi,
see Re: sequencing problem-Forms
Regards Michael

Initializu00EDng select options field with default values and with NO INTERVALS

Dear All,
I have used WDR_SELECT_OPTIONS technology within WD Abap.
I also have added the fields which have to be taken into consideration.
lt_range_table =
wd_this->m_handler->create_range_table(
i_typename = 'PLANT' ).
wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
i_read_only = read_only ).
Can I assign two values to this field 'PLANT' whereby the user may take only these values.
I mean kind of pre initializíng of this select options field with default values.
Due to this handling it should be prevented that the user can give other values
except this values.
Additonally it should be fine whether it is possible to disable the second input field
of this select options field like NO INTERVALS .
Regard
sas
Regard
sas

wd_this->m_handler->add_selection_field(
i_id = 'PLANT'
it_result = lt_range_table
I_NO_INTERVALS = 'X'
i_read_only = read_only ).
Pls check 'WDR_TEST_SELECT_OPTIONS' web dynpro component

Table editor problem with default value for column

Hi there,
I'm trying to use SQL Developer 1.2.1 on Ubuntu 7.10 (though I don't think the OS is relevant) and I'm running into a snag when trying to update table structures. If you go to edit the table to say modify a column name, and that column has a default value set, SQL Developer is encapsulating the value with brackets and quotes. When trying to save the changes, it complains about the default value being 4 chars too many for the column width. An example of this would be a currency code column of varchar2 (3) set with EUR as the default. SQL Developer changes the value to ('EUR') hence the error.
Is there anyway to prevent this from happening?
Cheers,
Chris

Could you please be more specific? In 1.2.1.32.40 I
added the column COL1 VARCHAR2(3) with default value
'EUR'. The data display field refreshed to show the
default value, so I edited it in a couple of entries
and comitted the change without problem. Then I
renamed the column from the "Edit table" popup menu.
Finally, I renamed the column from the "Rename
column" popup menu, no problem either.Ah, you are correct. That does work. What I was trying is select tablename in the object browser, then right click on it and select "Edit" from the contextual menu. You are then presented with edit table dialog box. If you then select a column in that box you will see a column properties box. In that section you can change the name, default value, datatype et cetera. Note that your default column value which should just be EUR (or 'EUR' to denote that it's a string) is now ('EUR'). Once you try changing the name to of the column to something else and then click OK, you should then get an error complaining of "Invalid varchar2 default value" with a more specific message of "Default values size 7 is greater than the allowed 3"
You have provided a work around, and thanks for that, but it would be nice to edit everything in the Edit table dialog box if you're modifying more than one column name. I'm tasked with cleaning up a bit of a messy database, and there are a good deal of columns to be renamed.
Cheers,
Chris

I want to set a variable with default value and can be changed by the user

hi,
i want to set a variable with default value and can be changed by the user, so i new a variable with setting : customer exit, single value, optional, ready for input.
in my customer exit code, i set a default value, eg. 20070530
when the variable screen popup, it display the default value 20070530, i changed it to 20070529, but it doesn't work , it still display the data in 20070530, how can i solve this problem?
your help is appreciated.

Liu,
As mentioned by Anil, you need to restrict your customerr Exit code to I_STEP = 1.
or.
<u>Open your Variable in change mode, in the Last Page os the Variable Maintenance you can provide default value. Note: you are doing same thing in Customer Exit. In your case no need of Customer Exit.</u>
Nagesh Ganisetti.
Assign points if it helps.

Default value on Selection Screen

Hi experts,
I want to put sy-datum + 1 as a default value on selection screen.
I tried this but it didnt work. Please help me.
DATA : tarih like sy-datum.
initialization.
tarih = sy-datum + 1.
SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE TEXT-002.
parameters : h_tarih like sy-datum obligatory default tarih.
SELECTION-SCREEN END OF BLOCK 3.
Thanks

Hi,
Do it in INITIALIZATION event.
SELECTION-SCREEN BEGIN OF BLOCK 3 WITH FRAME TITLE TEXT-002.
parameters : h_tarih like sy-datum obligatory default tarih.
SELECTION-SCREEN END OF BLOCK 3.
INITIALIZATION.
h_tarih = sy-datum + 1.
In this case no need to have one more extra variable. U can directly assign to ur parameter.
In data declaration u can only default hard coded values. But not calculated values. This is because first selection screen will be triggered and later ur calculations. So at the time of selection screen is triggered ur variable dont have any value. Thats why it was not working. Change ur code to like above. It will work fine.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Jun 27, 2008 12:37 PM

How to maintain default values to the screen fields.

hi,
i m creating screen in se51.
when i press New button the screen is filled with default values
nrart = 'h' and proz1 = '100' .
how can i set default values.
plz give me a response

HI,
You can set default values on to screen fields using SET and GET PARAMETER command, You need to assign a PARAMETER ID for that screen field and then use SET PARAMETER before the screen is called or in the PBO of the screen, you can set default values direcly in PBO of the screen but then you have hard code those value or read the data from database.
You need to have a TABLES statement to create a strucutre that you used to create your screen fields, then when you set value to these strucutre fields these values will get tranported to the screen fields automatically.
Regards,
Sesh

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel.

Delivery Address coming as a default in the home screen for creating a SHC

Dear Experts
I have done some changes in the delivery address and while saving it was asking to maintain as a default address otherwise it was not able to save the changes I made.So I maintained it as a default and saved the changes.
Now the issue is when we are in the home screen for creating a SHC this delivery address is coming as default.As we dont want this dekivery address to be default on the screen and the requirement is that user should be able to search the delivery address.
So we dont want that defaulted address.The other reasons were also checked and no where in the attributes we ahave maintained this default delivery adress.
Can you please help us how can we remove this defaulted delivery addres in the SHC creation screen.
Thanks and Regards
Vikas

HI Muthu
Thanks for the reply.
I again repeat I think you have not understood my question.These are very basic things you are mentioning about how to change the delivery address.i know all about this and in my query I have clearly asked that during the change option its asking to maintain the default delivery address and even if I dont select it my changes wont be saved.Second is even if I maintain another delivery address only then from the first delivery address the default screen will be unticked.
Because the issue here is that what ever the delivery address is maintained its defaulting in the shop screen for the creation of the SHC.
So my reequirement is how to set this.I have checked attributes and nowhere this delivery address has been maintained.
Brief about Issue:
We have done some changes in the delivery address (Transaction Edit
internal addresses in the URL screen)and during the save it was asking
us to maintain it as a default address without which it was not able to
save.So after saving on the creation of the shopping cart screen this
delivery address is coming as a default value.
We dont want this to be defaulted and the user should have the search
functionality for the delivery address.This problem is happening for
the org id for which I have done the changes.When i assign my user id
to the other org id the defaulted delivery address is not shown on the
shopping cart creation home screen.
We have checked in the attributes of the user and the org id and
nowhere this delivery address has been maintained.
I have checked the settings for the other org id for which it was not
showing as defaulted on the shopping cart creation screen and compared
these two and was not able to find any difference.Could you plase let
us know the problem in this case.
Regards
Vikas

Unlimited Delivery Indicator in relation with Default values in MIGO screen

Similar Messages

Maybe you are looking for