"Unlimited delivery indicator" vs "Delivery completed"
Hi,
if I set in PO creation "Unlimited delivery indicator" and "Delivery completed" in MIGO mvt 101 who wins?
I think unlimited delivery, do you agree with this?
Best regards
Hey,
The delivery completed is used to clear future obligation for the PO.
the unlimited delivery is for the amount of good reciept in compereson to PO
so they are not really conected
you can still post good reciept for a po with delivery completed.
but i'm not sure if you can create a n inbound delivery.
Similar Messages
-
Unlimited Delivery Indicator in relation with Default values in MIGO screen
What is the relation of 'Unlimited Delivery Indicator' in PO with 'Porposed All Items Indicator' in Default Values of MIGO?
Case:
PO created with quantity 100. GR is done for 100 quantity. If 'Porposed All Items Indicator' is set system allows to receive more than PO quantity in GR.
Its behavior is same as Unlimited Delivery Indicator in PO.'Porposed All Items Indicator' Indicates that items with quantities of zero are also suggested upon goods receipts with reference to purchase orders.
use:No more goods receipts are expected for items that have a quantity of zero, but they are possible. Items with quantities of zero may occur after partial deliveries or reversals, for example.
You can set this indicator if you often have to enter additional quantities to purchase order items that are already completed.
'Unlimited Delivery Indicator' the delivery quantity is not limited
Regards,
Pramod -
Schedule lines and complete delivery indicator
Hello,
If complete delivery indicator is set at header level of the sale order, the system confirms all the line items with the latest delivery date among the items, even though a few items may be available for delivery earlier. Subsequently VBEP table is updated with the single confirmed delivery date for all items.
Now, my requirement is to find out the earliest possible delivery date for each and every item in the order, for reporting purpose. If you uncheck complete delivery indicator, one could see a separate confirmation date at line item level. The question is how to get this data without making changes to the order?
I tried "order change" simulate function and is not providing me with the desired result. Any input would be helpful.
Thanks.Hi U V,
I feel functionally it is impossible BUT you may seek technical approach. Please customize this report getting help from abapers. TQ
rgds,
nanthakumar -
Complete delivery indicator in the sales order header level
my order quantity is 10 and having the complete delivery indicator in the header level
Complete delivery indicator in the sales order header level
when i am doing the partial delivery i got below error
Delivery quantity is less than quantity of 10 PC assigned to batches
this is warehouse linked.
Please let us know how to do the partial delivery.
when i click on the bacth icon to reduce the quantity it is greayed out.
is there any posiblity to reduce the quantity in the transfer order
Please do the needfull
thanks
Raju.Hi
Usually this Complete delivery indicator flow from Customer master data. you need to change this data in Customer Master
Sales Area Tab under Shipping view Remove the Complete delivery indicator, also in Partial delivery per item keep the field Blank ( Partial deliveries allowed )
I hope this will solve your issue
Award if useful to you -
Hello Experts,
Complete delivery indicator at sales order header level, partial del. item = C and Max del = 0 or 1 at item level are set in the order. But when you create delivery, it gives only a warning message and lets you create multiple deliveries.
Now, Are all messages in class VL controllable (meaning change from W to E)?
Is there any other way to accomplish the same other than user-exit?
Any help would be rewarded.
UVHi;
try this. You will find a "Complete Delivery required by law" option just above the Partial delivery indicator in the customer master shipping tab. This has to be checked. Pls check if this is done.
Once you do this the system would check the Complete delivery indicator in the Orders that are crated for the customer.
Regards,
Mani. -
Final Delivery indicator in Goods Receipt tab in Process Order
Hello Friends,
I have one doubt, thought to discuss with you.Whats the importance of Final delivery indicator in Process order.I know that if any further goods receipt is not accepted against the order than we should tick this indicator,because of which system sets the DLV status at order header level or if goods receipt qty against the order is equal to order qty than system automatically sets this indicator.
when we do the settlement of order than system looks either for TECO or DLV status of order , if its find there than system consider such orders for settlement.
Now my question is suppose i have done the Goods Receipt against the order less than the order qty, than system will set the PDLV Status against that order.Now no further goods receipt is expected against that order.Now i haven't set the Final delivery indicator in goods receipt tab in process order.But i have technically completed the order,because of which system has set the TECO status against that order.
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
As far as i know, system allows us to do,but on this issue i have got different answers from different person.So bit confused.
Thanks and Regards,
Jitendra Chauhan
Edited by: jitendra chauhan on May 8, 2009 8:42 AMDear,
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?
Yes
If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
You need to Final confirm (CNF) the Order to get the DLV Status.
Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV
If your order quantity10 and you produced 10 quantity it means that order is fully deliver then Final delivery will automatically be set.
The "delivery completed" indicator has the following effects:
o The item is regarded as closed, even if the total quantity was not delivered.
o A further delivery is not expected, may, however, arrive.
If status is DLV then it cannot be a WIP stage where the the good are posted to stock and production is completed
Please refer this thread fro DLV and TECO,
Re: order settlement
Regards,
R.Brahmankar -
Dear Sir,
my requirement is
i Made PO for 100 Nos for some material
only 60 Nos recd and i will not receive any further material againgst this PO.
i want to use the delivery indicator tab and close the PO line item
can anyone u please gudie me how to do this in system
R/Hi Sakthi
Please note that you can always close a PO at any stage in case if you feel it is the last receipt of goods on the PO.
go to Me22n and set the Delivery completion Indicator check box in the Item Level Details and also if you think no further invoice will be raised on the PO, also need to check the Final Invoice Tab on the indicator in the Invoice tab. These two checks will ensure it is not picked up for the Open PO reports.
Thanks
Sudhakar -
Setting final delivery indicator on scheduling agreements (ELIKZ)
Hello ALL,
Based on note 199749 SAP does not set the delivery complete indicator for scheduling agreements during goods receipt processing. We're employing thousand line scheduling agreeements where new schedule items are added to the scheduling agreeement items via MRP. When the delivery complete indicator is manually set MRP proposes requisitions instead of schedule lines which is our desired processing but we need the final delivery indicator to be automatically set. Does anybody know the user exit to set this indicator during goods receipt processing including any other helpful information.
Thanks so much for your time.Hello Walter,
this should be possible in BADI 'MB_DOCUMENT_BADI' ,
method MB_DOCUMENT_UPDATE.
Regards Wolfgang -
Recalling Process Order confirmations after selecting Last delivery indicator in error
Hello,
I was completing an order confirmation and hit the last delivery indicator. I submitted my confirmation but noticed I had not completed my amount. When I tried to pull the order back up,. I was not able to. Is there anyway to recall this order? I am new at my job and I'm just learning so I just went back through my notes and realized I was not suppose to use the "last delivery indicator". Any suggestions on how I can fix this or retrieve my order so that I can correc the amount and confirm the order would be very helpful.
Thank you in advance,
RitaHi Rita
If your question has been answered, please close this thread selecting the correct answer.
See this blog for more details:
How to close a discussion and why
BR
Caetano -
Final delivery indicator unset after underdelivery good receipt.
Hi, If the final delivery indicator is set in the purchase order SAP allows good receipts and then unset the indicator, only if the quantity in the purchase order is equal to the quantity receipt, SAP set final delivery indicator. The user want to set the final delivery indicator to close some purchase orders with underdelivery quantity.
Alejandra,
You can advise your user that the delivery completed indicator is not designed for this purpose.
If the user wishes to prevent further receipts against a Purchase order, for any reason, he should block the item rather than rely on the DC indicator.
ME22N for the order, select the item; hit the 'lock' icon; or Edit>Block.
This transaction is reversible.
Regards,
DB49 -
Final Delivery indicator in PO
Hello,
I am not getting " final delivery indicator " icon in purchase order.
we are using ECC6.
Thanks in advance,
Vikas R.Hi,
Active "Delivery completed" indicator for your plant in t.code: OMCD
For Service(external)
Check Field Selection Key for SERVICE PO Document type & make "Delivery completed" indicator is "Opt.entry" in GR/IR control segment for Field Selection Key PT9F( OR your Field Selection Key you are using for Frame work order document type) in following path:
SPRO-> MM--> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
Now assign Field Selection Key PT9F for SERVICE PO Document type & save.
Go for cycle service PO, SES & MIRO and can view Delivery completion indicator
For more check the SAP Note 735404
Regards,
Biju K -
Hi - Even though I have set-up partial delivery indicator to "C" - System is allowing partial deliveries after giving just a mere warning message. Is there any configuration that needs to be corrected to ensure that if a item line in order has delivery indicator "C" - system stops partial delivery?
Appreciate your suggestion.Hi
Apart from maintaining value C in the partial delivery indicator, you should also maintain X in the complete delivery indicator (in the same tab). Please check and post.
Thanks,
Ravi -
Delivery Indicator in MBST transaction
Hi All,
After 102 goods movement using MBST transaction, Delivery completion Indicator is knocked off in PO, it is standard functionality.
In my special case, I would to tikced the Delivery indicator in PO after MBST transaction...
Please give any exists, badi's and enhancement points...
Thanks.
Raj.check the link below
Re: MBST and USER_EXIT
Please go through the link and try to trigger a exit in debugging after your user action is done on the screen
Regards
Satish Boguda -
Hello
My question is
"Explain the circumstances in which the Final delivery indicator is automatically set when posting a goods receipt"
ThanksHi Sunil
Check help given by SAP
Set "Delivery Completed" Indicator
the delivery completed indicator for goods receipts if the delivered quantity lies within the under/overdelivery tolerance.
The "delivery completed" indicator has the following effects:
o The item is regarded as closed, even if the total quantity was not delivered.
o A further delivery is not expected, may, however, arrive.
o In the next goods receipt, the item appears on the selection list but has no selection indicator.
o The item can be reorganized even if the total quantity has not been delivered.
Note
Even if the "delivery completed" indicator has not been set, an item is'nsidered closed once the total quantity has been delivered. This mean that the "delivery completed" indicator is not necessary in this case.
Vishal... -
Final Delivery indicator not in all rows of Purchase Order
Hi,
I am constructing a query in BW where i need to filter out Purcahse Orders for which the Final delivery indicator is set.
The Purchase cube has the data coming in from following three datasources:
2lis_02_hdr (Purcahse Order Header)
2lis_02_itm (Purcahse Order Item)
2lis_02_scl (Purcahse Order Schedule line).
The Final delivery indicator is populated from Item and schedule line Datasources.The Purchase cube stores the data in such a way that the final delivery indicator is not set for a Purchase order in all the rows.
Please advice how can i populate the final delivery indicator in the cube for all the rows of a Purchase Order. Also I do not want to reinitialize the data load from R3 or PSA.
Regards
SapnaHi ,
The answer was helpful but my problem was not solved. But in some of the cases the Final delivery indicator is not getting filtered. Also we have Posting date as a Key field in the Info provider.
Now there are various scenarios. For eg:
1. If the Final delivery indicator is set from me23n then the posting date is saved in my Purchase cube AND hence i can sort the Posting date and get the final delivery indicator against the Max posting date.
2. If the Final delivery indicator is set through MIGO screen, then posting date is blank against final delivery indicator. Hence in Purchase cube the Posting date is blank and sorting will not work.
Please advice.
Regards
Sapna
Maybe you are looking for
-
Hi, Can any help how to do performance tuning in ODI. What are the procedure for performance tuning. What needs to checked for performace tuning. Is there any document for ODI performace tuning. Thanks, Gnanamanju
-
Legacy data(mapping to be done by xi (in xml format)) to sap using idoc .
hi all, I need to work in an object in which requirement is like , the source data is directly extracted from legacy and input file is made. now i need to create an interface program which will be used to create purchase req. in weekly basis. now ac
-
It's been awhile since I've done any CF and I'm baffled by the results I'm getting. I want to select all the records where the date is greater than or equal to today. This is with CF8 and an Access database. There are records for 9/25 thru 9/30. I ca
-
Where i can find the document for ABAP-SD techno functional guys
where i can find the document for ABAP-SD techno functional guys
-
Hi expert after greeting , I have CRS1/8 with two RPs installed, suddenly RP0 failed to boot and standby RP1 is running as active RP, when i console to RP0 i got the following output : Initializing DDR SDRAM...found 4096 MB Initializing ECC on b