Unlimited minutes after 9?

Do unlimited minutes after 9pm on weekdays include all networks or just verizon?

SuzyQ wrote:
SeaJohn wrote:
How does it work when the two parties are in different time zones? Each phone will be charged based on the time zone it is in.
If it's 10PM in Chicago, and I call someone in Alaska, where it's 7PM, do those minutes count as nightime? Your phone in Chicago will be free minutes; the phone in the 7 PM time zone will be charged airtime (based on their calling plan).
Hope that makes sense.
Additionally, if you are calling a Verizon Wireless phone, the minutes would be free whenever the call was made as Verizon Wireless to Verizon Wireless is ALWAYS free.
If you are calling a landline, there wouldn't be any minutes.
If you are calling a different cellular carrier, well that has to do with the plan the other carrier is providing.
The ONLY thing that the caller needs to worry about is that their minutes will be free if they call after 9PM.

Similar Messages

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed ...any ideas?

I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

XOrg is maxxing out my CPU for several minutes after start [UNSOLVED]

Since the last update, XOrg has been using 99% of my CPU power for about three minutes after it is started. This happens whether I am using Slim, console login, whatever; I checked with top and it is definitely X that is using up the CPU power. This happens on Debian as well as Arch.
Here is my Xorg.0.log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/skylark:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-ARCH x86_64
Current Operating System: Linux skylark 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 14 08:56:10 UTC 2008 x86_64
Build Date: 17 August 2008 10:36:51PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 28 10:54:27 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Touchpad0"
(**) |-->Input Device "Mouse0"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x7c06c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,27a0 card 1025,0110 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,27a2 card 1025,0110 rev 03 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,27a6 card 1025,0110 rev 03 class 03,80,00 hdr 80
(II) PCI: 00:1b:0: chip 8086,27d8 card 1025,0110 rev 02 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,27c8 card 1025,0110 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,27c9 card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,27ca card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,27cb card 1025,0110 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,27cc card 1025,0110 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,27b9 card 1025,0110 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:2: chip 8086,27c4 card 1025,0110 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:3: chip 8086,27da card 1025,0110 rev 02 class 0c,05,00 hdr 00
(II) PCI: 02:00:0: chip 11ab,4352 card 1025,0110 rev 14 class 02,00,00 hdr 00
(II) PCI: 03:00:0: chip 168c,001c card 1468,0428 rev 01 class 02,00,00 hdr 00
(II) PCI: 0a:09:0: chip 104c,8039 card 3000,0000 rev 00 class 06,07,00 hdr 82
(II) PCI: 0a:09:2: chip 104c,803b card 1025,0110 rev 00 class 01,80,00 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,11), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x34000000 - 0x340fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0x34100000 - 0x341fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:28:2), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 10: bridge is at (0:30:0), (0,10,14), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 10 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 10 non-prefetchable memory range:
[0] -1 0 0xd0200000 - 0xd02fffff (0x100000) MX[b]
(II) Bus 10 prefetchable memory range:
[0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 11: bridge is at (10:9:0), (10,11,14), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 11 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
(II) Bus 11 prefetchable memory range:
[0] -1 0 0x30000000 - 0x33ffffff (0x4000000) MX[b]
(--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0300000/19, 0xc0000000/28, 0xd0400000/18, I/O @ 0x1800/3
(--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xd0380000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[1] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[2] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[3] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[4] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[5] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[6] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[10] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[11] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[20] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[1] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[2] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[3] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[4] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[5] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[6] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[7] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[8] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[9] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[10] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[11] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[12] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[13] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[14] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[15] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[16] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[17] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[18] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[20] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[16] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[17] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[26] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 945GM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[16] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[17] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[22] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[23] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[24] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[25] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[26] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[5] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[6] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[7] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[8] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[9] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[10] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[11] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[12] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[19] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[26] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[27] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[28] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[29] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[31] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xD0300000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd0400000 - 0xd043ffff (0x40000) MS[b]
[1] 0 0 0xc0000000 - 0xcfffffff (0x10000000) MS[b]
[2] 0 0 0xd0300000 - 0xd037ffff (0x80000) MS[b]
[3] -1 0 0x00100000 - 0x33ffffff (0x33f00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xd0205000 - 0xd0205fff (0x1000) MX[b]
[8] -1 0 0x34100000 - 0x3410ffff (0x10000) MX[b]
[9] -1 0 0x34000000 - 0x34003fff (0x4000) MX[b]
[10] -1 0 0xd0644000 - 0xd06443ff (0x400) MX[b]
[11] -1 0 0xd0440000 - 0xd0443fff (0x4000) MX[b]
[12] -1 0 0xd0380000 - 0xd03fffff (0x80000) MX[b](B)
[13] -1 0 0xd0400000 - 0xd043ffff (0x40000) MX[b](B)
[14] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[b](B)
[15] -1 0 0xd0300000 - 0xd037ffff (0x80000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[19] 0 0 0x00001800 - 0x00001807 (0x8) IS[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[23] -1 0 0x000018c0 - 0x000018df (0x20) IX[b]
[24] -1 0 0x000018b0 - 0x000018bf (0x10) IX[b]
[25] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[26] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x00001880 - 0x0000189f (0x20) IX[b]
[30] -1 0 0x00001860 - 0x0000187f (0x20) IX[b]
[31] -1 0 0x00001840 - 0x0000185f (0x20) IX[b]
[32] -1 0 0x00001820 - 0x0000183f (0x20) IX[b]
[33] -1 0 0x00001800 - 0x00001807 (0x8) IX[b](B)
[34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[35] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 110080 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 440316 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xd0300000
(II) intel(0): [drm] ring buffer = 0xc0000000
(II) intel(0): [drm] mapped front buffer at 0xc1000000, handle = 0xc1000000
(II) intel(0): [drm] mapped back buffer at 0xc4000000, handle = 0xc4000000
(II) intel(0): [drm] mapped depth buffer at 0xc5000000, handle = 0xc5000000
(II) intel(0): [drm] mapped classic textures at 0xc6000000, handle = 0xc6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(==) intel(0): Write-combining range (0xc0000000,0x10000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) intel(0): Option "MigrationHeuristic" "greedy"
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000001f820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000001fe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000001fe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000001fe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 190
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "acer_laptop"
(**) Keyboard0: XkbModel: "acer_laptop"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) Synaptics touchpad driver version 0.14.6 (1406)
(--) Touchpad0 auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(**) Option "SHMConfig"
(--) Touchpad0 touchpad found
(**) Option "CorePointer"
(**) Touchpad0: always reports core events
(**) Option "Protocol" "ImPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "ImPS/2"
(**) Option "SendCoreEvents"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ChordMiddle"
(**) Mouse0: ChordMiddle
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Option "EmulateWheel"
(**) Option "EmulateWheelButton" "2"
(==) Mouse0: YAxisMapping: buttons 4 and 5
(**) Mouse0: EmulateWheel, EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Touchpad0)
(II) XINPUT: Adding extended input device "Touchpad0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: ps2EnableDataReporting: succeeded
(--) Touchpad0 auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(--) Touchpad0 touchpad found
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): EDID vendor "LPL", prod id 42240
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
(II) intel(0): EDID vendor "LPL", prod id 42240
And my xorg.conf:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Touchpad0" "CorePointer"
InputDevice "Mouse0" "SendCoreEvents"
Option "AutoAddDevices" "False"
EndSection
Section "Module"
Load "freetype"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/input/mice"
Option "ChordMiddle"
Option "EmulateWheel"
Option "EmulateWheelButton" "2"
EndSection
Section "InputDevice"
Identifier "Touchpad0"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/input/mice"
Option "SHMConfig"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "acer_laptop"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
Option "Migrationheuristic" "greedy"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
EndSection
Section "Extensions"
Option "Composite"
EndSection
Does anyone have a clue what's going on here?
Last edited by Gullible Jones (2008-12-03 20:46:38)

So I reenabled "glx" and "DRI" and everything seems just fine. I believe the culprit in my case was simply the "NoAccel" flag being false by default.
This is now what my xorg.conf looks like:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
#RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
#Load "record"
Load "GLcore"
Load "extmod"
Load "dbe"
Load "xtrap"
Load "dri"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "QDS"
ModelName "27"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Option "NoAccel" "true"
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
Option "DRI" "true"
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x960" "1024x768" "800x600" "640x480"
EndSubSection
Endsection
Section "Extensions"
Option "Composite" "Enable"
Endsection
Section "DRI"
Group 0
Mode 0666
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
And everything is A.O.K.!

My Mac is not authorized to play a video 5 minutes after it was purchased

I just "purchased" a free video at the iTunes Store. A few minutes after the download finished, I attempted to play the video as was greeted with an Authorize Computer dialog reporting "This computer is not authorized to play 'title of the video'. Would you like to authorize it?"
I have been playing music, videos and TV shows on this Mac since it was new in September 2007, and my iTunes Purchased list goes back to 2004.
I've investigated further and found ...
1. Recent music purchases play fine, probably because they have no DRM.
2. Recent TV shows get the authorization block.
3. Older music purchases get the authorization block.
4. iTunes on my iBook gets no authorization block.
This is the first time I've seen this authorization warning.
iTunes' Apple Account Information reports "3 machines are authorized to play content purchased with this account." Although there's no way to see the identify of those 3 machines, I quite sure they're my desktop Mac (now getting authorization blocks), my iBook, and my wife's Mac.
Before I take the easy way out and reauthorize my desktop Mac (and possibly lose one of my five authorizations), I'd like to know more about what happened.
Could this be the result of upgrading from Mac OS X 10.5.6 to 10.5.7 four days ago?
-- Ward

Macaroni does a nightly Repair Permissions. I had restarted a couple of times since upgrading to 10.5.7; I did another for good measure. My Mac remained unauthorized.
I took Mike's advice and deauthorized my Mac. As I expected, that dropped my Apple Account Computer Authorizations from 3 to 2. Reauthorizing restored my ability to play protected music and videos.
Although my problem has been resolved, I'm leaving this topic as unanswered because it remains a mystery why my Mac was in authorization limbo.

LaserJet Pro M201nw stops responding to ePrint requests a few minutes after connecting to network

I just set up a new LaserJet Pro M201nw and it works great, except for a consistent problem using the printer with ePrint.
I was able to set up Web Services on the printer and add it to HP Connected as an ePrint printer. Printing through ePrint and Google Cloud Print works for a couple of minutes after turning the printer on.
But after a period of time, which can be anywhere from 3 to 10 minutes, the printer appears as "Offline" in HP Connected. If I check the ePrint settings on the printer through the front LCD or the web interface, for "ePrint Server Status", one of two things happens: sometimes it just stays busy forever, or after a couple of seconds I see "Connection error. Check Internet connection."
When I see the error message, I can request "Turn ePrint off temporarily." The printer will reconnect to ePrint and work for a couple of minutes again.
The local networking features of the printer such as network printing and the web interface don't appear to have any problems.
I don't think the problem is related to my internet connection, which is reliable. I can monitor traffic on my network and see communication between HP's ePrint XMPP servers and the printer when the printer is operating normally. When the printer has this problem, I still see incoming traffic from HP but no outgoing traffic from the printer. This is very odd and suggests part of the printer's firmware isn't functioning correctly.
Has anyone else had issues with this printer model?
This question was solved.
View Solution.

Hi @trisk ,
Thank you for updating me, I appreciate you taking the time.
At this point I recommend that you please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and als

I have installed Premiere Elements 11 from a disc I bought from Amazon. I keeps asking me to re-install or if it does start stops a few minutes after I start a project. I have a windows 8.1 PC. I have tried numerous times to install the program and also to open it as Administrator as suggested by a friend but it still refuses to work. I need direct help from Adobe but don't know how to get to them on this website as they seem to rely on user forums to advise customers.

WhiteHouse Norm
This question is already being responded to in the following duplicate thread
Premier elements 11 keeps stopping
Please reply in the other thread which has a discussion in progress.
Thank you.
ATR

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

I am Streaming audio from my IPAD to my Apple TV from Rhapsody application. when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode. I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream). When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD. All device are on current releases of software. I have no Video hooked up to the Apple TV. How do I correct this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Several minutes after it puts display to sleep, network get disconnected.

Several minutes after it puts display to sleep, network get disconnected.
I am sure that it get disconnected because I check the router traffic from another MAC and it get disconnected.
No mother if its connected by cable or wifi, it get disconnected.
In Energy Saver properties "Computer sleep" is set to "Never" and "Display sleep" is set in "10 minutes".
"Wake for network access" is checked but it will never work if network get disconnected.
"Automatically reduce brightness before display goes to sleep" is checked
All the other options are NOT checked.
I hope someone from this community can help me with this issue.

try resetting PRAM
http://docs.info.apple.com/article.html?artnum=2238
and SMC
http://docs.info.apple.com/article.html?artnum=303319

L355 s7195 freezes several minutes after startup. does not respond to anything. possible faulty fan.

okay so ive had so many problems with this laptop. i got in auguast and ive had to reformat it twice, the first time was a week after i got it.
so a while ago it started this thing where it woudl freeze up 5 or ten minutes after i started it up. I had no idea what was going on, i uninstalled several programs, to see if they were causing it (aim, videogames and such) and nothing worked. finally someone told me it could be because of the system overheating. i listened to his advice and let it sit a couple hours for it to cool off. i turned it back on and it worked fine. i reinstalled everything and it worked fine for about a month.
a couple days ago i had a windows update, which it kept insisting to restart for. I had to use it for school so i waited till i got home to restart it. actually i just shut it off and i figured it would finish configuring the updates when i turned it on the next morning. I did so and after configuring the updates, it started again. Freezing 5-10 minutes after i turned it on. this was last friday morning. this time i thought i knew what the problem was. i left it off throughout the day and when i got home i took it out and again it froze. the next day i was extremely busy so i didn't even get to check it then. i tried it again sunday, mind you this was after 2 days, and it was still freezing. ive tried it several times the last couple days. now im getting really pissed. I'm about to call toshiba support but i was just wondering if there was some small mistake i was making that i can do to fix this.

okay so ive had so many problems with this laptop. i got in auguast and ive had to reformat it twice, the first time was a week after i got it.
so a while ago it started this thing where it woudl freeze up 5 or ten minutes after i started it up. I had no idea what was going on, i uninstalled several programs, to see if they were causing it (aim, videogames and such) and nothing worked. finally someone told me it could be because of the system overheating. i listened to his advice and let it sit a couple hours for it to cool off. i turned it back on and it worked fine. i reinstalled everything and it worked fine for about a month.
a couple days ago i had a windows update, which it kept insisting to restart for. I had to use it for school so i waited till i got home to restart it. actually i just shut it off and i figured it would finish configuring the updates when i turned it on the next morning. I did so and after configuring the updates, it started again. Freezing 5-10 minutes after i turned it on. this was last friday morning. this time i thought i knew what the problem was. i left it off throughout the day and when i got home i took it out and again it froze. the next day i was extremely busy so i didn't even get to check it then. i tried it again sunday, mind you this was after 2 days, and it was still freezing. ive tried it several times the last couple days. now im getting really pissed. I'm about to call toshiba support but i was just wondering if there was some small mistake i was making that i can do to fix this.

Firefox 3.6.3 segfaults between 10 seconds and 1 minute after starting

Yesterday, some of my addons updated (I can't remember which). Everything was fine until about an hour ago firefox segfaulted (with three windows and ~90 tabs it does this occasionally).
Now, firefox segfaults between 10 seconds and 1 minute after starting to load. Even with no restored session - just the moz homepage as the single tab, even in safemode.
I'm using firefox 3.6.3 on an AMD-64 machine running Kubuntu Jaunty (9.04) KDE3 version.
== Troubleshooting information ==
I don't know how to find all but includes past modern theme, googlebar, en.gb dictionary (recently installed), session manager, tab mix plus, character identifier, flash and realplayer plugins, super drag and go (I think), add bookmark here (possibly)

Going back to a profile backup from two days ago has seemingly worked, implying that the problem was the new en-GB language pack so I'll have find out where to report a bug on that.
This can be marked as solved now by anyone who knows how.

Every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again I tried all but nothing, everything works except the call I have an iPhone 4 Version 6.1.3

every time I try to call or they call me, my phone beugs I can not immediatly to call, denied access the directory for 2 to 4 minutes after that it works again
I tried all but nothing, everything works except the call
I have an iPhone 4 Version 6.1.3
thank you for your help

That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed). Version 4.2.1 marks the end of your updates for that device.

Installed new Ram & 10 minutes after startup the computer keeps freezing.

I have mac book pro from 2006 (1.83ghz) I recently installed 2 new 1G ram chips from crucial for a total ram of 2G. I am running osx 10.6. and 10 minutes after startup the computer keeps freezing. Could it be that 10.6 is too much for the processor?

10.6 is not "too much for" your MBP. You may have gotten a faulty RAM module — it happens.
Start your machine up while holding down the D key, and when Apple Hardware Test appears, select the Extended Test. Run the extended test at least once all the way through, if you can, and post back with the exact text of any error message it reports.
If the test can't be completed, you definitely have a hardware problem, and the first suspect is the new RAM. In that case, reinstall the RAM that originally came in your machine and run the extended test again. If it is completed without errors this time, the Crucial RAM is clearly at fault and should be exchanged.

About 10 minutes after launching Chrome, the header text turns to hieroglyphics. What's up with that? I have a screenshot...

About 10 minutes after launching Chrome, the header text turns to hieroglyphics. What's up with that? I have a screenshot...As I am typing this question, my menu has changed to hieroglyphics.

Sorry I can't help you except to say that I was having problems with a momentary freeze on the trackpad action on an MBP and I traced it to Chrome. Chrome was generating a lot of console entries and the machine worked much better after I got a copy of 'find any file' for three bucks and used it to itentify all files containing 'google AND chrome', which I dumped in the trash. Things have been much better since then.

TS3276 Icloud mail stops working 3 minutes after I sign in

Icloud mail stops working every time I sign in, for some reason it just freezes wherever I am working. No idea

mellfrommountain brook wrote:
When I try to log onto a new site the blue line in the text box freezes and the connection does not take place. This happens about 5 minutes after logging on.
There are many possible reasons for that.
Most likely a corrupted cookie or cache file for that site may be responsible.
On the Safari menu bar got to Safari -> Empty Cache
Then go to Safari -> Preferences and click on the 3rd symbol from right.
Click on Details -> type the name of the particular site (e.g. facebook) in the search field and delete all upcoming entry's.
Restart Safari and try again to log in on the site.
Lupunus

Unlimited minutes after 9?

Similar Messages

Maybe you are looking for