Unlink Tag from File Name

Hi,
I use iTunes on my Mac, and lots of my songs have international characters. I chose letting iTunes to organize my files, so I have folders and files with international characters as well.
When I export my playlists to m3u8 it works fine, but some softwares cannot recognize international characters on file path and thus the playlist import process will fail.
Is there any option to keep using iTunes to organize the files/folders, but without using international characters from tags? The only way I see is do NOT use itunes to organize the files - so I would have to manually keep the folder/files names without the characters that I don't want.
Thanks.

ojuniorbr wrote:
Is there any option to keep using iTunes to organize the files/folders, but without using international characters from tags? The only way I see is do NOT use itunes to organize the files - so I would have to manually keep the folder/files names without the characters that I don't want.
When you select the preference to "Keep organized..." there are no options to control how it works. You can accept it the way it works, or you can uncheck the option. Personally, I dislike how it works (and you have provided more reasons not to like it) and always keep it unchecked.

Similar Messages

  • RH10 variable and build tag source file names

    I'm using RH10 and outputting to WebHelp. My company requires that I archive project source files to our CVS via Eclipse. I am not using RoboSource_Control and must use the company's development resources for archiving.
    Since archiving the initial project, I have been uploading only source files with modified dates.
    However, I have discovered that the files I thought were storing user variables and build tags are not the correct files to archive. Since I am uploading all files with a newer date and that's not working, I need to know the user variable source file name and the build tag source file name that stores the currently defined variables and build tags.
    I have already tried the WebHelp forum and was directed to this forum to pose the question because I'm looking for source file information instead of output file information.
    Thanks for your help!
    karen

    Yes, Eclipse does work that way. However, we do not use our development directory as the local Eclipse repository. I need to move changed files to the local repository (stores all source files in the project) so that Eclipse can upload changes to the server. Yes, this is planned redundancy.
    That said, it is not acceptable to spend the time copying all files in the large projects from the work folder to the local repository. I simply need to know which individual files to copy that include the currently defined variables and build tags. Note, we do not copy the SSL folder output files to our local source file repository, or other associated reference files that are not actually project source files.
    Can you find someone who knows which files I need?
    Thanks,
    karen

  • File type from file name

    Hi,
    Is there any standard method to get a file type from file name?
    File name can be ‘C:\test.doc’ or “C:\test’(test – is file) i.e. with or without file type extension.
    ...Naddy

    You can use the Function module PC_SPLIT_COMPLETE_FILENAME
    export paramter extension will tell the type of file
    Sample Output
    Import     COMPLETE_FILENAME     C:\TEST.TXT
    Import     CHECK_DOS_FORMAT     
    Export     DRIVE     C
    Export     EXTENSION     TXT
    Export     NAME     TEST
    Export     NAME_WITH_EXT     TEST.TXT
    Export     PATH     \

  • WCF Service and Sharepoint Form library : How i can read a access a form libray and query a item from file name and read form xml in WCF service ?

    WCF Service and Sharepoint Form library : How i can read or access a form libray and query a item from file name and read form xml in WCF service ?
    Ahsan Ranjha

    Hi,
    In SharePoint 2013, we can take use of REST API or Client Object Model to access the SharePoint objects like Form Library.
    SharePoint 2013 REST API
    http://msdn.microsoft.com/en-us/library/office/dn450841(v=office.15).aspx
    http://blogs.technet.com/b/fromthefield/archive/2013/09/05/working-with-sharepoint-list-data-odata-rest-and-javascript.aspx
    SharePoint 2013 Client Object Model
    http://msdn.microsoft.com/en-us/library/office/fp179912(v=office.15).aspx
    http://msdn.microsoft.com/en-us/library/office/jj193041(v=office.15).aspx
    With the retrieved file, we can then use XmlDocument object to parse it and get the values you want:
    http://weblogs.asp.net/jimjackson/opening-and-reading-an-xml-file-in-a-document-library
    http://stackoverflow.com/questions/1968809/programatically-edit-infopath-form-fields
    Best regards
    Patrick Liang
    TechNet Community Support

  • Need help with EXS24 "read velocity range from file name"

    I am trying to import 127 drum samples to a single key using the option shown here. The option says "Map to key dropped on and read velocity range from file name". I can find no documentation in the manuals on how to do this. What is the syntax required in the file name to make this work? I need to do several of these imports. The capability is cleary there, but I need help on how the file name should be formatted. My thanks to anyone who can help.

    Hi
    Not a direct answer to your question, but if you are doing a lot of sample mapping etc, you may want to check out Redmatica's KeyMap Pro or the simpler Keymap 1:
    http://www.redmatica.com
    CCT

  • EXS24 read root key from file name only

    Has anyone encountered this with EXS24 in Logic 7? If you set preferences to "read root key from file name only" then EXS reads the root key from the file itself when loading samples. On the other hand if you set them to "read root key from file only" then it reads the root key from the file name. Or am I just imagining this?
    P.S. if anyone from Apple is reading, could you please update EXS24? It's a bit primitive by today's standards.

    Hi
    Not a direct answer to your question, but if you are doing a lot of sample mapping etc, you may want to check out Redmatica's KeyMap Pro or the simpler Keymap 1:
    http://www.redmatica.com
    CCT

  • Cloud does not disappear from file name?

    why does it take "forever" for the cloud to disappear from file name?
    I saved a numbers document to the cloud a half an hour ago, and the cloud is still there.

    HDash-Tech,
    thanks for the tip, but since I have my iTunes Library on a NAS I have to direct iTunes every now and than via "choose library" to the folder and it doesn't make a difference...
    I think it's somehow due to my iTunes Match.  I know they do not sync audiobooks, but they mess up pretty much everything else within my library.  Songnames here and there and especially cd covers!
    Any other idea how to get it straigten out again?
    Thank,
    Daniel

  • Batch document title from file name?

    Forgive the newb question on a fairly simple matter.
    I want to create File Info: Document Titles from file names, minus the extension, for about 400 images.
    Is this possible with Batch rename, if so what am I missing?
    Thanks,

    I am unclear how a batch rename will enter data into File Info: Document Title.
    I have never used them but you might look at metadata templates.  Several sites on web on how to set them up and what they will do for you.

  • B2B identifying TP from file name and not Interchange

    We want B2B to identify trading partner from ISA/GS segment, but B2B is taking it from file name. We have property oracle.tip.adapter.b2b.edi.identifyFromTP set to "Interchange". As I understand based on the tip.property it should always take from the ISA/GS segment in dat file.
    We also have Trading Partner Identification Type set to EDI Interchange ID while setting up trading partner and it is set to the same value as Interchange Receiver Id in the Document Protocol.
    Anyone has any ideas?
    Thanks

    Hello Venkat,
    ideally this should work. Guess you have not restarted b2b after changing the tip.properties. If you still have issues, please raise an SR and also send the b2b.log in DEBUG mode.
    Rgds,Ramesh

  • Removing date from file name

    Hello,
    Is there any way to move all the file from one location to another and remove the datepart from filename.
    for eg:- if file name is abc_20150411.xls change to abc.xls. if file name does not contain date part then ignore it.
    Can any one suggest if its possible.
    Thank You

    Hi ,
    I have created package based on your question and decribed in detail in below post:-
    https://msbitips.wordpress.com/2015/04/12/ssis-removing-datestamp-from-file-name-when-moving-from-one-location-to-other/
    You need package code, just add comment in this thread.
    Thanks
    Prasad
    Mark this as Answer if it helps you to proceed on further.

  • Remove LF characters from file names

    I have a folder full of files with filenames that contain LF character (ASCII code 10).  I want to use Automator's "Replace Text" funcion to remove these non printing characters from file names.  Is there a way to do it?
    If automator is not able to do this task, I will take a bash script or applescript solution as well...

    Take a look at: http://stackoverflow.com/questions/4417588/sed-command-to-fix-filenames-in-a-dir ectory
    (I changed  tr -d "\r\n" to tr -d "\n", but try both)
    for f in ~/Desktop/*
    do
        new="$(printf %s "$f" | tr -d "\n")"
        if [ "$f" != "$new" ]; then
            mv "$f" "$new"
        fi
    done

  • How can I extract metadata from file names?

    If I want to extract metadata from file names? How can I do that? I want to read through the file names and when I get to a certain character ("-"), I can take the string just before that character and store it in a column in SharePoint. Is this
    do-able through scripting? 

    If I want to extract metadata from file names? How can I do that? I want to read through the file names and when I get to a certain character ("-"), I can take the string just before that character and store it in a column in SharePoint.
    Is this do-able through scripting? 
    You should be able to leverage the split method.
    In PowerShell It would look like:
    # Gather the file name
    $file = "myawesome_filename-Month-Day-Year-Ect.doc"
    #split the file name by the "-" character
    $file = $file.split("-")
    # Use a foreach Loop to gather the individual items.
    foreach ($item in $file) {
    write-host $item
    #Outputmyawesome_filename
    Month
    Day
    Year
    Ect.doc
    # If you want to only grab the first item, you can do $file[0] <-- powershell starts counting with zero base.
    $file[0]
    #output
    myawesome_filename
    Entrepreneur, Strategic Technical Advisor, and Sr. Consulting Engineer - Strategic Services and Solutions Check out my book - Powershell 3.0 - WMI: http://amzn.to/1BnjOmo | Mastering PowerShell Coming in April 2015!

  • How do I bulk upload documents using PowerShell and extract metadata from file name?

    I have a requirement to upload a bunch of documents into a document library. Based on the content type, the rules of updating the metadata is different...the one giving me trouble is to extract the metadata from the file name. If I have a file name like
    "part1_part2_part3.pdf" how do I extract part1, part2, part3 and tag each document being uploaded into SharePoint, using PowerShell? I have searched and have not been able to find anything to get me started.
    Has anyone done this before? Or is there a blog I can take a look at? Thanks
     

    You will have to write a PS script encompassing this logic.
    Read files from the folder using
    Get-Item cmdlet
    Determine the content type based on the path or filename.
    Split the file name to extract the tag names.
    If the metadata fields in the content type is a managed metadata field, check whether the term exists and set it.
    Updating SharePoint Managed Metadata Columns
    with PowerShell
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • PSE 13 "Import Keyword Tags From File" Fails

    Whenever I try to do the above command, it fails. As shown in the attached figure it gets to 9%. Does anyone have any ideas on how to troubleshoot this error?
    Thanks in advance.

    is there a way to import tags from PSE 12
    The PSE 12 Organizer and LR 5 use different file formats for exporting and importing keyword hierarchies. PSE uses XML format, while LR 5 uses a tab-separated format.  If you're a programmer or technically minded, you could convert from one to the other using your favorite scripting language.
    But the approach suggested by dj_paige can be modified to accomplish what you want without scripting, by copying the keyword hierarchy from the "upgraded" LR catalog that was created from your PSE catalog to your "good" LR catalog:
    1. Make a manual backup of your "good" LR catalog: Lightroom Help | Back up a catalog.
    2. In LR, open the catalog that you created previously by upgrading (converting) the PSE catalog -- you can usually get to that catalog by doing File > Open Recent.
    3. Go to grid view in the Library by doing Window > Library followed by View > Grid (usually you're already in Library grid view, but just in case...)
    4. Make sure the Keyword List panel is showing on the right by doing Window > Panels > Keyword List.
    5. You should see the keyword hierarchy from your PSE catalog.  If you don't, stop and post a screen shot of the entire LR screen.
    6. Do Metadata > Export Keywords to export those keywords as a LR-format text file.
    7. Open your "good" LR catalog by doing File > Open Recent.
    8. Do Metadata > Import Keywords and select the file you exported in step 6.
    9. All the keywords that were exported in step 6 will be added to the current catalog, and there will be duplicate keywords if there were already keywords of the same name in the catalog.  Those new keywords will not be attached to any existing photos in the current catalog.

  • Get Information From File Name

    Hi,
    I have a somewhat general question, is it possible to extract certain "elements" from a file name?
    For example: x0 xxx abc 123 xx xxxx.avi (or any type txt, jpg, and etc...).
    Assuming that the "abc" is constant throughout the files but the digits are changing (not sequential), can I extract just the "abc 123" (or whatever number it is)?
    I know how to strip/build path, but here I don't know what to search since the distance from the beginning is changing and the digits are changing.
    Thank you,
    Solved!
    Go to Solution.

    There are several string function that allow you to search for a string, and  break the string into several parts.
    Another option is using Regular Expression, yours sound like "abc/s[0-9]{3}", that should return the "abc 123" part.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

Maybe you are looking for