Unload dbsrv7 fails because there are active connections
Hello,
i want to stop ZEN before backup runs and wanto to unload dbsrv7 as a cron
job but it fails because there are active connections open. The console
message is the following:
DBSRV7.NLM still has active connections
Unload module anyway? N
Our Server ist runnig Nw6 SP2 and ZFD 4.01 with IR 5
Ive found nothing helpful at the knowledgebase and ive tried the utility
stuffkey from Coolsolutions but it dows not work.
How can I stop DBSRV7 automatically with a switch to yes at the console
screen?
Thanks for your help
Michael
Administrator
Hello,
the problem was resolved with TID2962044.
Bye Michael
Similar Messages
-
I am unable to get past the first step of Winston Churchill's answer because my phone says "checking for a software update failed because you are not connected to the Internet." Did my iphone's WiFi connection also get lost with the Contacts, Mail and Text Messages? When I tried the software update, as recommended by Winston Churchill, the iphone was connected to my desktop which is connected to the Internet.
You can't use your computers Internet connection to update your phone from the phone itself. If you want to use the computers Internet connection to update your phone you must update it through iTunes.
-
Hi,
I have been using Windows server 2012 at my company and generally take a remote access to this server. However, since last few days, I have been receiving the Error "The remote connection was disconnected because there are no Remote Desktop License
Servers available to provide a license. Please contact the server administrator".
My entire work has come to a halt because of this error as all my applications are running this server and their remote access is needed for my regular requirements.
I had tried one of the solutions proposed at one of these forums especially using gpedit.msc but to no avail.
Regards,
AdityaHi Aditya,
Thank you for posting in Windows Server Forum.
Agree with the words of armin, please verify that you have properly installed correctly. Verify RDS Licensing service running on License Server. Verify that the client, the RDS server, and the license server can communicate by ensuring that Domain Name System
(DNS) is configured correctly on each computer. You can run the ping command from each computer to each computer using the IP address, FQDN, and the NetBIOS name. If any of the ping commands fail, verify the DNS configuration on the network.
In addition, you can also try “GracePeriod” registry setting on this path (HKLM\System\CurrentControlSet\Control\Terminal Server\RCM) from
this article.
Hope it helps!
Thanks.
Dharmesh Solanki -
I have a mac but am experiencing the same prompt? "iTunes could not contact the iPod software update server because you are not connected to the Internet. Make sure your Internet connection is active and try again."
Hey ksgrech,
I found the following information which may be of assistance in troubleshooting this error on a Mac:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Furthermore, you may want to refer to this article (error 3194):
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Cheers!,
Matt M. -
Can't connect computers to printer (b210) via network because there are "other networks"
I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.
Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.Hotfix Released here:
http://support.microsoft.com/kb/2916846 -
Ok I’m completely lost here....
I’m running Microsoft Windows XP Home Edition Service Pack 3 (Build 2600), I updated iTunes to 11.0.2.25 and some other updates for windows last night on my laptop. I try connecting to download the iOS 6.1.2 update for my iPhone 4 and my iPhone 5 via iTunes. I am getting this message for both "iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connection is active and try again." Everything was fine with connecting prior to running these updates because I downloaded the 6.1 update with no problems when it came out.
What I have done so far with which has made no difference:
Checked my internet connection
Changed my internet connection
Signed out of iTunes and then signed back in
Ran diagnostics via iTunes, comes back with: Network interfaces verified- Internet connection failed- Secure link to iTunes store verified
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-02-20 20:40:48.
Disabled firewall, spy sweeper, virus scanner
start>run>cmd> typed "netsh winsock reset"
Rebooted
Checked the parental controls in iTunes
Start>control panel>internet options>connections tab> lan settings> selected the "automatically detect settings"
Deleted iTunes and reinstalled iTunes
When I would "ping gs.apple.com" it would come back with "request timed out" no matter what internet connection I was on, so I went into the hosts file start>my computer>(C:)>WINDOWS>system32>drivers>ect>HOSTS and added "# 127.0.0.1 gs.apple.com". Now it will ping gs.apple.com just fine but still comes up with the "iTunes could not contact the iPhone software update server because you are not connected to the internet" message in iTunes when i try to download the update.
If anyone can come up with any ideas that I haven’t tried, please let me know. This is keeping me back from updating both of my phones along with if anything should ever happen to them; restores as well.im computer is connected i can go to the apple store through itunes but when i plug my phone in i keep getting that alert... i plugged my phone in to update it after the apple loaded the itunes icon and a usb showed up.
-
Hi,
I am getting this error from windows server : remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator.
Remote desktop Session Host Server Configuration Details:
The RD licensing Diagnoser(WIN-909xxxxxxxxxxx):
Number of license available for clients : 0
Remote Desktop Session Host server version: Windows server 2012 R2
Active Directory Domain : Not applicable
Licensing mode : Not configured
Now, Down I am getting this error as well shown by the system:
RD licensing Diagnoser Information- 2 errors:
Win-909xxxxxxxxxx : licensing mode for the Remode Desktop Session Host Server is not configured.
Win-909xxxxxxxxxx : The grace period for the Remote Desktop Session Host server has Expired, but the RD Session Host server has not been configured with any license servers. connections to the RD Session Host server will be denied
unless a license server is configured for the RD Session Host server.
Now my kestion is :
Do I need to buy a license key of the windows server to not getting this error or it may continue appear even if I purchased the license and not configure RDS and AD.
Do I need to configured only RDS and AD and buy the license key of windows server later because I still have 55 day of trial.
Do I just buy the RDS client access license (L).
Please could you help on this, am new in windows server?Hi,
As the message indicates, the grace period for the Remote Desktop Session Host server has Expired, you need to purchase and install RDS CALs. Also, you need to configure related settings
to continue using Remote Desktop Services. Otherwise, you cannot connect to the server remotely.
References:
Understand the licensing grace period
http://technet.microsoft.com/en-us/library/hh553157(v=ws.10).aspx
Install and issue RDS CALs or TS CALs
http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
Specify the Remote Desktop Licensing Mode on an RD Session Host Server
http://technet.microsoft.com/en-us/library/cc754487.aspx
Specify a License Server for an RD Session Host Server to Use
http://technet.microsoft.com/en-us/library/cc770585.aspx
Meanwhile,
1. AD is not required for RDS. However, it is recommended.
2. As you do not purchase Windows Server and related licenses as well, I suggest you contacting Microsoft sales or partner firstly.
How to buy Windows Server 2012 R2
http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx
Best Regards.
Jeremy Wu
TechNet Community Support -
Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
Hello all, new to the forums.
I've been recieving the error message "itunes could not contact the ipod software update server because you are not connected to the internet". This problem didn't occur at all for the past 2 years of using itunes.
I've already scanned through numerous websites and forums for help, but none of them worked.
This set of instructions resulted in no change to any of the problems, though iTunes lists that as the supposed solution.
# Open Internet Options from control panel.
# Click the Connections tab.
# Click the LAN Settings button.
# Select the Automatically detect settings checkbox.
Others include installing IE7, which that didn't work either.
Can anyone help?Here it is:
Microsoft Windows 7 x64 Ultimate Edition (Build 7600)
LENOVO 2537FC4
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 003DB3100363E3C0
Current user is not an administrator.
The current local date and time is 2011-06-16 17:03:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 3100M
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {505BB17D-FA14-4FA0-9D77-F7998FEBB435}
Description: Intel(R) Centrino(R) Advanced-N 6200 AGN
IP Address: 192.168.0.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Thu Jun 16 16:54:56 2011
Lease Expires: Fri Jun 17 16:54:56 2011
DNS Servers: 192.168.0.1
68.94.156.1
Adapter Name: {610821DE-0532-4C65-839B-B74B65859FBA}
Description: Intel(R) 82577LM Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {10983C8A-FCDA-4B2F-8A89-E1596BA6B7BA}
Description: Bluetooth Device (Personal Area Network)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Active Connection: Broadband Connection
Connected: No
Online: No
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-06-16 15:35:33. -
Recently I bought a Mac book pro online, but I was surprised when I received it because there are no DVDs at all with it. Is this normal?
Ziatron-
That is a really great question! It took some digging to find the answer!
On an older Mac, about 2010 or older, you need access to one of:
• The Mac App Store ( such as on a Mac with a working 10.6.8 or better)
• working Recovery HD
• a bootable 10.7 Installer, on thumb drive, Hard drive, or DVD
So for ONE 2010 or older Mac with a bad drive, you would have to buy the US$70 Apple thumb drive, or have previously made a DVD or Hard Drive when you previously downloaded 10.7. Or you re-install 10.6.8 then overwrite it with the downloaded 10.7.
• another Mac with 10.7 installed so you could transfer Recovery HD to the down Mac with "Lion Recovery Disk Assistant"
OS X Lion: About Lion Recovery Disk Assistant
On some 2010 and most 2011 models, if Recovery HD is messed up or not Installed, but you have a working Broadband connection [with DHCP enabled], the Firmware has been upgraded so it will boot from the Internet and do the whole job using "Lion Internet Recovery" as described in the second section of this glossy article:
http://www.apple.com/macosx/recovery/
If no DHCP is available [no Router upstream, either yours or your ISP's], it may not work. -
Can I make rman inform/fail if there are offline datafiles?
Hi all,
IS there any method that rman can warn we about offline datafiles(also when those files are accessible)?
I want to make a full database backup and I want rman to warn me or make the backup failed if there are
some offline datafiles.
ThanksThe easiest way to do that will be creating a script to test that condition using sqlplus before invoking the rman backup, because rman does not have an option to stop if there are offline datafiles.
Regards.
Edited by: ncalero on 25/11/2010 09:19 PM -
I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docxHi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support -
Calendar syncing cannot be enabled because there are no calendars available.
I have iCloud calendars and a google calendar, but iTunes says I have no calendars. Endless loop. How do I break out of this?
I tried this but when I go back to check Sync Calenders I get this message:
"No calendars available. Calendar syncing cannot be enabled because there are no calendars available. Do you want to open Calendar and create a calendar now?"
When I open calenders it show I have two calender On My Mac.
The same applies to Sync Contacts.
I have tired Restore iPod but that did not make any difference. This problem occurs across all logins on my Mac.
I've Reistalled OS X but that did not help either.
Thank you for your suggestion. -
Where can i check in the real time monitoring tool if there are active calls in progress?
where can i check in the real time monitoring tool if there are active calls in progress?
Hi
Selecting Call Manager -->Call Process ---> call activity
HTH
Regards
Carlo
Maybe you are looking for
-
After System Update last night, the system will not boot with IOPlatformExpert.cpp:1504 error
I have had Lion for a 2, 3 months on the iMac 27 inch purchased last October (2011). Last night I chose to update the system, and deselected iMoves update because it was 1GB, and chose only 4 updates, including iTunes, Safari (i think)... But the upd
-
How to use the pretty stars in the legend to the right in this forum
Just wondering as I've seen this for a while, but see nowhere where they've been used. If you open up a thread (ie: this one you're reading now - not in the main menu), you'll see a couple of pretty stars in legend on the right. Something like: 'corr
-
6500 Slide unrecognized USB device
Hi all, I've been handed my sisters 6500 slide( 555552 RM-240 ) to fix because it wont transfer pics. Essentially when it's plugged in it prompts for usb mode just fine but shows as an unrecognized device (on three different computers, two windows an
-
Error loading metadata through parent child method
Heirarchy Project (Dimension)->TotalProjects->Xseries->X1->a .........................................................X2->b .........................................................X3->c Project (Dimension)->TotalProjects->Yseries->Y1->j ............
-
I am coping all my work and applications on dvd. I would like to keep all my information in my calender is there any way I could do that? even if I restore my computer with the original cd/dvd?? I also really would like to keep all my fonts in my fon