Unloading point is not copied from PR -PO,when i change account assignment

Hi All,
unloading point is not copied from PR -PO,when i change account assignment from 'K' to 'F' in PO. unloading point field should be in display for both 'K' & 'F' Account assignment category in SPRO because we r using this field to acknowledge my thirty party planning system.
Thanks in advance
Vengal Rao

Have a look at SAP note <a href="https://service.sap.com/sap/support/notes/734273">734273</a>

Similar Messages

  • Unloading point and ship to party not copied from PR to PO

    Gurus,
    Am populating unloading point and ship to party in a PR for both item category standard (" ") and service ("D"). However during PR conversion to PO, both these fields only get copied for item category standard and NOT for item category service. What is the correct set up so that these fields are copied from PR to PO during PR conversion ? Any customizing point i missed ?
    Cheers
    Olivier

    HI,
    Please see note:
    118008   >  MM-SRV: Goods recipient and unloading point missing
    unloading point can not be used in MM-SRV.
    About ship to party I was not able to find any information. I would recommend to enter a ticket at SAP, so that an expert can have a look into your system.
    Best Regards,
    Arminda Jack

  • Discount pricing is not copied from Qoutation to Sales order.

    Hi All,
    Issue:
    Discount pricing is not copied from Qoutation to Sales order.
    Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
    Points will be rewarded.
    Regards,
    neslin.

    kindly check in the price determination  whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

  • Pricing not copied from qoutation to Sales Order.

    Hi All,
    Issue:
    Discount pricing is not copied from Qoutation to Sales order.
    Please suggest the correct copy control/Routine programs which i can check to proceed furthur.
    Points will be rewarded.
    Regards,
    neslin.

    kindly check in the price determination  whether you have assigned the quotation document pricing type ? simmilar like the sales order type you have assigned ?

  • Letter of Credit not copying from Quotation to Sales order

    Hello,
    I have attached a LC to a Quotation. When i am making an order with reference to the Quotation, the LC is not copying from Quotation to the Sales order. Kindly help.
    Regards,
    Shahzad

    Hi,
    Did you want to say that you have maintain some text in quotation and that text is not copying to the sales order some thing like that?
    So I suggest you to check your setting by going to the following Tcodes.
    VOTXN over there you can define the text types.
    And you have to assign you text determination procedure to the order also.
    If you want that text to be copied to the billing also then assign the procedure to the billing doc.
    If you have assigned properly your procedure then it will copy the document.
    Regards
    Raj.

  • Item 000002 is not copied from the reference document

    Dear All,
    I am facing a typical problem while creating Price difference sales order w.r.t. invoice.
    Document types in the system are -
    Z2FC - Normal Sales order type, ZPD - Price change order type, Z2FB - Normal invoice type
    My item category determination is -
    Doc. type -  Itm cat. gp.  -  Usage - Hghr itm cat - Default itm cat. - Manual itm. cat.
    ZPD         -   NORM         -  blank   - blank           -  G2N                  - L2N
    ZPD         -   NORM         -  blank   - G2N            -  G2N                  - L2N
    Z2FC       -   NORM         -  blank   - Blank           - TAN                  - TAP
    Z2FC       -   NORM         -  blank   - TAN            - TANN                - TAN
    Copy control is -
    Z2FB to ZPD for item category TAN with proposed item categories are G2N and L2N.
    Z2FB to ZPD for item category TANN u2013 requirement 302 [Do not copy item]
    During my Z2FC sales order creation I was having line items as follows
    Item no. -  Mat. code     -  Qty -      Higher level item - Item category - Amount
    10         -  101329          -  3     -      blank                 - TAN                - 35,000.00
    20         -  MC091234    -  3     -      10                      - TANN             - 0
    30         -  MC091234    -  1     -      10                      - TAN                - 5000
    We are not using the sales BOM. I need to provide line 20 free to the customer. Hence I have manually maintained 10 in the higher level item column for the line item 20. The item category determined was TAN. Then I had changed it to TANN manually. So the amount became zero. Line 20 became the child and line 10 became parent.
    At the same time customer also wishes to buy the material code MC091234. Now the material code MC091234 is of HALB type where as the material code 101329 is of FERT type. There is validation in the system that only FERT type of material could be sold and HALB type of material could be supplied as free. [With item category TANN]. In case HALB type material is also required to be sold then I need to manually maintained value in the higher level item. So I had maintained the value 10 in the higher level item column for the line item 30. The default item category determined is TAN. The invoice is also created properly. [Z2FB type]
    But when I am creating the invoice correction document type ZPD w.r.t. Z2FB type invoice, I am able to get the two line items for the material code 101329 in line item 10. One each for G2N and L2N item category.
    But for the material code MC091234 in line item 30, I get only one line item with item category G2N. I did not get another line item for the material code MC091234 for the corresponding L2N type item category
    At the same time following messages are displayed
    Message no. V1475 Item category for item 000002 cannot be determined and
    Message no. V1476 Item 000002 is not copied from the reference document
    Please help.
    Thanks in advance
    Piyush Ranpura

    Dear All,
    Any help???
    Yet my issue is unresolved.
    Thanks & Regards
    Piyush Ranpura

  • " VL 476: Item 'Official Doc. Number' is not copied from the reference doc"

    Hi Guys,
    When I am doing the Accrual Reversal in F.81 I am getting the following error
    " VL 476: Item 'Official Doc. Number' is not copied from the reference document ".
    I have maintained the number ranges also. I am not able to understand why the system is issuing this error.
    Pls suggest.
    Thanks
    Srikanth

    Hi Guys,
    Can anyone please help on this error.
    Thanks
    Srikanth

  • Text is not copied from Customer masterdata to sales document header

    Hi Friends,
    Text was maintained in customer masterdata, that should be copied in to sales order header. In Quality server its working as per requirement. But in production its not copied from customer master data.
    Same configuration settings are in production as well as quality(VOTXN)
    Please suggest me regarding this

    Hi Durga,
    Please go to SD> Basic function > text control> Define and Assign Text Determination Procedures and in that screen, check the customer sales and distribution change view customer sales text and sales note for customer and its assignment .
    I hope these will be helpful for you.
    Regards,

  • PO number  not copied from Contract to Sales order

    Hi Gurus,
    when i try to create a sales order w.r.t a contract the Po number is not copying from cintract to sales order.
    also the PO item is not copying from contract to sales orde.
    Could u tell me the reason.
    Cheers,
    Sumith

    Hi Sumith,
    I'm not sure though but try this one this might jus help.
    Go to VTAA,
    select the target & Source doc type.
    Go to header and check the COMPLETE REFERENCE CHECK BOX,
    Which says it copies the whole of the reference doc from the
    source doc to the target doc.
    I jus hope this will sole your problem.
    Cheers!!
    Nitin

  • Price not copying from contract to maintenance order in IW31

    Hi Gurus,
    I am facing issue in one of the client where Price is not copying from contract to maintenance order in IW31. But while doing the same in another client it is working fine.
    I did not find the settings for this change. Can any one please help me for which settings price is not copying to IW31 transaction?
    Thanks in advance!
    Best regards,
    Karun Kumar

    hi
    i think if you have assinged the contract the servies will not copied ,for this in the external tab select the serice selectionbutton ,here specify the agreement from their select the serives you required
    regards
    thyagarajan

  • Net weight of the material is not copying from contract to sales order

    net weight of the material is not copying from contract to sales order?
    plz help me

    Hi,
    If the *CONDITION VALUES* are *manually* entered then the values will not be copied from the *SOURCE TO TARGET* document
    Please check in the  Contract whether the vales derived from Condition records are entered manually.
    If you want the prices to be copied automatically then they have to maintained through CONDITION RECORDS in *VK11*.
    Please maintain the CONDITION RECORDS and check whether they have copied or not
    Please also cehck the COPY CONTROLS from CONTRACT to SALES ORDER in VTAA transaction -- at item--->pricing type. and set it a s  D
    Please check the above settings and let forum know the feedback.
    regards,
    santosh

  • Shipment category not copied from deliveries because none exist

    Dear Gurus,
    Can u please let me know what this 2 errors means:
    1) Shipment category not copied from deliveries because none exist
    2) Shipping material not copied as means of transport not unique
    The above two warning message are getting from Inbound IDOC. its strange, First time I have seen u201C SHIPMENT CATEGORYu201D
    Appreciate your supportu2026thanks
    Rgds,
    Shafiq

    Hi Eric, can you please tell me how you resolved the issue. I am having the same problem and i don't know whether the fact that I can't map back to the IDOC that created the SHIPMENT, if it related to this error message or not.

  • Eq. not copying from Maint. Work order to Work Approval in WCM

    Dear Experts,
    While I am creating Work Approval from Work Order, Equipment number is not copied from Work Order as per screenshot. why?

    Greetings Parag,
    You have "Reference Object" in your Sequence above the "Reference Object with Installed equipment", which makes the transaction first fill the Functional Location only, and afterwards, the Equipment field is grayed out by the time it gets to copying it.
    Swap the Sequences of fields 50 and 200 or delete the field 50 from copy settings in
    SPRO > Plant Maintenance > Work Clearance Management > Master Data > Data Transfer When Creating with Template > Define Fields

  • STO Delivery Date is not copy from Allocation Table Site Date

    Hi,
    I have a problem when Stock Transfer Order created based on the Allocation Table, the delivery date is not copy from Allocation Table. E.g. In Allocation Table delivery date is 26.09.2009, but in STO delivery date is 06.11.2009.
    Check the configuration and also check the stock, there is stock available to be delivered on 26.09.2009.
    Can someone please give me a hint to find out what is missing or wrong, and how to fixed this?
    Greatly appreciate for your suggestion and sharing.
    Kind Regards,
    2tea

    I found the problem finally.

  • Why do some videos not copy from iphone to pc?

    I don't understand why some videos will not copy from my iphone 4s to my pc (win xp) when I connect iphone usb to pc using "scanner and camera wizard"? Just some of them. It doesn't matter if its 2min or 2 sec long. Just randomly says it can't copy to my pc...
    why??
    Also can I avoid all this if I have icloud set up on both devices?
    I haven't tried because it seems that everywhere I have read and researched - icloud only pushes photos/photostream/camera roll (as well as documents, contacts, etc) But I am focused on home videos I have recorded on my iphone camera trying to get it off iphone and onto pc.
    Immediate response would be SOO appreciated!

    Yeah I considered that but I had so many photos & videos I attempted it this way. And I am getting some videos to copy to pc - juist not all...grrr thanks for the icloud info though,

Maybe you are looking for

  • Error when creating Advanced Table in Advanced Table

    Hello, I have created an advanced table, which works fine. When I add an inner advanced table to the outer advanced table I receive the following error stack (see below) and I have no idea what is causing this error. I have only added 1 column to the

  • Nested Composite Component Doesn't work for table column

    I have reported this issue as defect 1541 but I'm hoping someone my have a suggestion on a work around for this. Here is the issue I am attempting to use composites to represent a table column. I have tried this with both IceFaces and the standard im

  • Need information regarding BAPI

    hello every one,   I have a requirement where in I have to use 'BAPI_ACC_ACTIVITY_ALLOC_POST' for transaction KB21n.I need an example of how to use this BAPI and what are master tables that are needed to implement this transaction(KB21n). Please prov

  • Gridview Border color issue in IE10

    Hi, I am facing an issue in IE10(Version: 10.0.9200.17116, Update Versions: 10.0.21 (KB2987107)). when I try to render a grid view, the borders of the cell are not in proper color. The grid view is applied black border for cells and text color of gri

  • Exporting Data in Tab Deliminated format

    Does anyone know if it is possible to export a report from ZAM 7.5 using Tab Deliminated format rather than CSV? I need to create an automated export in TAB delinated format for comparison to other systems, all I can find is options for CSV output. T