Unloading Point & Receiving Point Not Visible in Invoice.

Hi All,
I have one condition type YFRT which is get updated on Unloading Point & Receiving Point.
I want to update it in Invoice but in invoice nowhere i can see Unloading Point & Receiving Point.
ie. which gets copied from SO.
Now its showing Unloading Point & Receiving Point missing when i update the condition in Invoice.
Condition record is maintained on Unloading Point & Receiving Point.
How to proceed?
Reg,
Antaa21

Hi
Does it get populated in your sales order ? THe reason I ask is that if you calculate the condition in the order and do not recalculate it at the time of invoicing you should get the condition copied as-is.
Anyway, if you need to fill the shipping point in the pricing structure, KOMK, you can use exit RV60AFZZ. Here you can add a logic telling the system where to find the value and set it in the invoice pricing.
Does it help you ?
best regards
Michael

Similar Messages

Shipping Point/Receiving Point

HI,
i would like to create inbout delivery in reference to PO. In tab "Shipment" i can't edit item "Shipping Point/Receiving Point". How to do it editable?
Thank you in advance.
Kasia Gac

Hello,
The receiving point is there in the Unload tab in ECC6.0 and it is an editable field only (when you use the transaction VL31n). you can enter the receiving point that is assinged to the storage location.
The config can be seen in Logistics Execution>Shipping>Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Assign Goods Receiving Points for Inbound Deliveries..
Regards,
Sakthi

Receiver agreement not visible in receiver determination( ID)

Hi,
I could not see receiver agreement in receiver determination in ID.
Even i could see my receiver agreement in ID.
Give some inputs to solve this issue.
Thanks & regards,
Ruban

Hi,
I did as u said..even though i could not see receiver agreement in receiver determination.
One more issue is in interface determination, if i select type of interface determination as Enhanced i could able to select name and Name space in inbound interface and interface mapping.
If i select type of interface determination as standard i could not see name , name space for inbound interface and interface mapping.
Thanks
Ruban

Missing shipping point/receiving pt

Hello,
I have a problem with shipping determination. I have created my shipping conditions assigned in customer record, assigned loading grp in material record, did customizations like sales doc type/shipping condition, replaced LF with my delivery type, config SC- Loading grp-plant-proposed shipping point. But when i create Sales order and item, shipping tab does not automatically show 'shipping point'. Basically, it is not getting determined? Any ideas, clues. When I give manually the shipping point, the error message is
"Ship.condition 01 loading grp Z001 plant ZVK StLoc not defined" but my delv type is custom one and assigned in sales order and also my SC is assigned to Sales order type in IMG. What is the problem?
Please help. Points will be awarded.
Thanks
Venky

Hello Guys,
Thank you all for the help. I have verified and i had done all that. I am still having problem.When I go to incompletion log:
I get 'Missing Shipping point/receving pt' and all the fields are blank except plant(ZVK), delivery priority ('1'), max part delv('9'), order combination
(checked), net weight, gross weight. Anything to do with unloading point, receiving point, route, shipping type that i need to configure or any background job to run to update?
My Shipping data:
Plant: ZVK
Shipping Cond: Z8
Loading grp: Z001
Shipping point : ZVK1
sale doc typ : ZA99
delivery type : ZLFV
delivery item cat : ZVKN
storage loc: ZKV
I have
1) Defined Shipping Point in Enterprise Struct: ZVK1
2) Assigned shipping point to plant in enterprise :
   ZVK (plnt) -- ZVK1(sp)
3) defined shipping conditions: Z8 (thru shipping point and goods receiving detr)
4) assigned shipping condition to sales type:
   ZA99- Z8
5) defined loading grp : Z001
6) did shipping point determination
   Z8(SC) -- Z001(lgrp) -- ZVK(plnt) -- ZVK1(prshp)
7) defined delv typ: ZLFV
8) defined delv item cat : ZVKN
9) did item cat determintaiton
   ZLFV (del) typ) -- ZVKN (item cat)CHSP (usage) ZVKN (Item cat)
10) in my sales doc type : i have assigned delivery type ( ZLFV) in Shipping section.
11) ASSIGNED storage loc to plant and warehouse in Enterprise: ZKVZvk001. But in the error message i do not see the Stloc populated. is it any clue?
Please help.
Thank you,
Venky

Receiving point not saved in VA01

Guru's,
I working with the client who wanted to store the Unloading point and Receiving point during the VA01 (Order entry time). It works perfect when we enter these 2 values at the header level but it's not working when we enter at the line item level.
Please create sales order with at least 2 different items and entry the unloading point and receiving point. Save the order.   When you display the order (VA03), double click on the item level and click "Shipping" tab, you will notice only the Unloading point got saved but the Receiving point did not save.
When I recall the same order in VA02 and maintain the Receiving point, it then saves the data.
The problem we are facing is only during the first entry time.
Any help on this will be greatly appreciated and points will be rewards ASAP.
Please respond to my email [email protected]
Thank you very much,
Nevill
California, USA.

Hi AniKumar,
Can you please attach the pdf document regarding how to display unloading point hours in sales orders or forward to [email protected]
Thankyou

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.

I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps.

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

I downloaded the latest version of itunes. Now I cannot open iTunes. I receive this error message: The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll. Thoughts?

I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a

Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll

Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll'
This appears to be a common problem, can anyone provide me with a 'user friendly' solution please?

Remove MobileMe if still present on your computer.
Otherwise see Troubleshooting issues with iTunes for Windows updates.
tt2

Why i receive errors: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"

Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

Hi, i received message "The procedure entry point xmITextReaderConstName could not be located in the dynamic link libery libxmI2.dll" when ever i switch on the PC?

Hi, i received message "The procedure entry point xmITextReaderConstName could not be located in the dynamic link libery libxmI2.dll" when ever i switch on the PC?

It's a simple fix and doesn't involve reinstalling anything.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck

After Installing Itunes, it will not open and I receive this error, "The procedure point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll"

Please help, cannot open itunes after uninstalling and reinstalling multiple times. Each time I receive the error message, "
The procedure point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll

Does anyone have any suggestions? I restarted my PC and even tried to repair through the contol panel Uninsta; program. HELP!!!

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
I installed iTunes, then quicktime. After I installed quicktime, I began seeing this pop up everytime I opened iTunes.
iTunes works, this just appears everytime I open it.
I completely uninstalled every apple software on my laptop, then reinstalled everything.
Nothing happened, still the same.
Windows 7
64Bit

Hi,
I have exactly the same problem as the OP. To answer some questions:
I only have one copy of QTCF.dll.
It is in the correct place.
I have deleted it and repaired QT to replace it several times.
I have tried different versions of QT.
Win 7 Pro 64
I ran SysInternals MS Process Monitor to see what was going on. All programs which call this DLL were looking for it in their root directory, which suggested to me that the registry entry was either missing or corrupt, so...
I ran Regsvr32 on the dll and received the following Windows message:
"The module "qtcf.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that the "qtcf.dll" is a valid dll or OCX file and then try again"
Now I'm out of ideas.
Cheers,
Tony

? fixing apple sync notifier.entry point not found. Entry point split3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Upon computer start up I receive message: procedure entry point split3_wal_checkpoint could not be located in the cynamic link library SQLite3.dll.
Apple Sync Notifier.exe Entry Point not found.
Anyone have solution?

IIRC, This problem happens when you have a piece of software installed that either doesn't properly register the DLL it uses, or is improperly installed. The draw back is that if that software is runnig when you install the Apple software, the DLL is loaded, and the Apple software doesn't install the DLL because it already finds it, so it doesn't need to load it. Now you reboot, and the other software isn't running, and Apple can't find it's DLL, so you get the error.
You have a couple of options. You can find the DLL in your "Program Files"\"Common..." folder tree and copy it to the Apple folder where it is giving you the error, or you could properly register the DLL with your OS so that it knows where to find it when it is needed. Another option which should work is to remove the Apple software which is giving you the error, perform a fresh reboot (possibly into safe mode) and re-install the application before you launch anything else.

TS4123 Error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."

Dear All,
I've receive a error message that read " The procedure entry point salite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
Due to this had cause me unable to back up my iphone. Please advice how can i reslove this.
This happens after I install Sumsung application on my PC.

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

Unloading Point & Receiving Point Not Visible in Invoice.

Similar Messages

Maybe you are looking for