Unlock a FM file that does not have the Read-only attribute?

I have FrameMaker 8.0p277. I was trying to import formats from a file on my network. Everything froze. I had to reboot. When I reopened my FM book file and the individual chapter files, I got the lock message that prompted me to reset the lock and open each file. I did that--opened each file and reset the lock in each file. However, when I go to update my files, I get a message that one of my files is read-only. The attribute settings does not say this. I also can't even click in this file any more. I tried removing it from my book file and adding it back in. But that didn't change anything. Is there a way to get this file unlocked again?

This happened to us once.
Be sure you are pressing the keys sequentially, except for F, that is:
Esc
Shift+F
l
c
Except for Shift+F, do not press all the keys at the same time.

Similar Messages

  • HT4623 how can i update my iphone 4 that does not have the update option in the settings?

    How can i update my iphone 4 that does not have the update option in the settings?

    From the article you linked, scroll down to the section "Update your device using iTunes"

  • HT4623 I have an Iphone 3 that does not have the software updates how can I update it?

    I have an IPhone 3 that does not have the software updates in my settings how can I update it cause I can not download any apps or games?

    The 3G can not be upgraded beyond 4.2.1, but if the phone isn't there yet, see below.
    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • Can I copy/paste a FF Reader pdf file to a 2nd computer that does not have FF Reader?

    I have 2 computers, one has Fire Fox Reader one does not. Is it possible to copy/paste by way of a jump drive a pdf file that is saved using Fire Fox Reader to the computer that does not have Fire Fox Reader and be able to open & work with that pdf file? The second computer only has Adobe Reader installed.
    I already know that an Adobe Reader pdf file moved from the 2nd computer to the first will open, it opens in Fire Fox Reader.

    Yes, if you save a PDF file then you can open that file with any program that can handle such a PDF file.
    So if the other computer has the Adobe Reader then that program will be used.

  • How do you delete a picture that does not have the trash can icon to do so.

    I Am trying to delete a picture and it does not have the trash can icon. 

    You have to sync it off of the device using iTunes. That is likely how it got there in the first place.
    See:
    http://support.apple.com/kb/HT4236

  • Is it possible to import a Fixed Text file that does not have a header?

    I'm trying to import a Fixed Text file through Import Manager, but the text file I am receiving does not have a header on it (the first row is valid data). When I try importing this, Import Manager uses the first row of data as the headings. Is there any way to turn this off and tell Import Manager there is no header data in the file?
    Thanks!

    Hi Ryan ,ur requirement can be met only when u import the file as ODBC .for this follow the below steps.
    1)Go to control panel,in ur settings,select administrative tools
    2) In that select DATA SOURCE(ODBC ).
    3)Go to SYSTEM DSN tab select tab .
    4)Select ur file type MICROSOFT TEST DRIVER (.txt,.csv)
    5)Double click on "Import DSN" and in the blank give the name of DATA SOURCE NAME any name u want to give.
    6)Uncheck the use current directory box and select the directory ur file is it will automatically show ur source file select it and click ok.
    7) Now when u import ur file as ODBC give the name of ur DATA source name which u have given and it will show ur file in the source preview itself .
    In  this way u can import ur file as ODBC.
    Hope this may help u.
    Regards
    Ankit

  • SKYPE INSTANT MESSENGER FROM AN ANDROID THAT DOES NOT HAVE THE SKYPE APP

    I HAVE A LENOVO HARD-WIRED TOWER & WINDOWS 8.1 OPERATING SYSTEM. MY FRIEND, DAVE, HAS AN ANDROID PHONE - HIS PHONE DOES NOT HAVE SKYPE INSTANT MESSENGER, BUT ANOTHER INSTANT MESSENGER THAT SHOWS A LIGHTNING BOLT. DAVE IS ONE OF MY SKYPE CONTACTS. WHEN I SEND DAVE MESSAGES VIA SKYPE INSTANT MESSENGER, HE CAN SEE MY MESSAGES, BUT I CAN NOT SEE HIS. ANY SUGGESTIONS, ADVICE? THANK YOU. SIGNED, GINA

    Hi! The obvious solution to this would be having your friend download skype from google play store. that way you're both on Skype, and it's free aswell. https://play.google.com/store/apps/details?id=com.skype.raider  

  • Reading a XML file that does not have namespace

    Hi,
    I have a customer who sends XML files that has no namespace (no first line which has xmlns tag).
    It has a proper XSD, however I am unable to read this using File-Read as an XML file.
    Any suggestions ?
    (eg) file looks like below:
    <EdiAcknowledgementOut>
    <SchemaVersion>1.0</SchemaVersion>
    <FileType>PO</FileType>
    <CustCode>PII</CustCode>
    Thanks,
    Revathi

    Hi Naresh,
    The "rejectedMessage" property is for 10G, I am not 100% sure about its implementation in 11G.
    In 10G the faulted XML file moves to this location "Oracle_Home\bpel\domains\domain_name\jca\project_directory\rejectedMessages".
    This property is used to move the files which are not valid XML or which are not schema compliant. For DB polling I don't think this property is used.
    -Yatan

  • Embedding fonts in an existing pdf that does not have the fonts embedded

    Hi,
    I have an existing pdf that fails to open on my ereader.
    So I opened in acrobat x pro to see what might be the cause.
    Selecting "file"--> "properties" -->"font" ( fonts used in this document) I can see that this pdf uses multiple windows trueType fonts and that none of them are embedded in the pdf document.
    Now my ereader is linux bases, so I am guessing this might be a problem.
    Being an ereader I didn' give me much to go on.
    So i would like to embed all the fonts listed in this list into the pdf file and save it again with the fonts embedded.
    I went to "file"-->"save as optimized pdf" -->"font"
    But there both lists embedded and unembedded fonts are empty.
    Why is this and how can I embed the fonts shown in the document properties into the pdf?
    They seem standard windows fonts like e.g.  ArialNarrow

    I just looked a bit furder and actually checked wether the fonts existed and found the following:
    I am using windows vista.
    The fonts mentioned in the properties of the pdf actually exist in the windows installed fonts but
    in windows they are no longer TrueType but OpenType.
    So I am guessing this might be the reason they are not in the list of unembedded fonts in the optimizer window.
    Is there an easy way to say to acrobat to replace one font ( not found on this computer) with another font that does exist and also to embed that font in the pdf document?

  • Anyone on T-Mobile UK that does NOT have the iPhone 4S battery drain

    Hi,
    Just wondered if anyone is out there who is on the T-Mobile network, and is not having battery issues with the iPhone 4S?
    Every SIM card from T-Mobile I tried in my phone gives me the drain.
    SIMs from other providers (so far, O2 and Three) appear to be fine (i.e. they FIX the battery drain problem).
    Even had T-Mobile replace my SIM, to no avail.
    Just wondering if it is the type of SIM they use?
    Please leave a note if you are on T-Mobile, and whether you have the problem or not.

    I thought it wouldn't be that, but I don't understand why when I put a SIM from another provider in, the drain immediately stops, and the phone works normally.
    I have tried completely factory restoring my phone, and not putting anything onto it, just using it on its own, with the SIM in it.
    The drain is still there, which suggests it isn't a problem with the settings for me.
    Flight mode doesn't help - drain still there. Removing SIM fixes it instantly, or, as I say, using a SIM from a different provider. This is really strange.
    Unfortunately I am tied to a contract, and can't switch providers at the moment...

  • How do I create a stand-alon​e execute out of my teststand sequence? I need to run the execute on a computer that does not have the tesstand applicatio​n installed on it.

    I would also like to use the teststand basic gui window wich asks for the serial number and then runs the tests without seeing the teststand environment in the background
    ie I would like the test to look simple to the user without building a new gui.
    Sincerely
    Aik Lewin

    Hi,
    You will need to use the Run Engine Installation Wizard found on the Tools menu. In addition you need to create a installation set for the operator interface.
    Look at Chapter 16 Distrubuting TestStand ( chapter 17 for version 2).
    Once you have created your installation, install is on your new system.
    The serial number etc is part of the process model. When you run the entry point 'Test UUTs' the PreUUT callback is executed which asks the user for the serial number.
    Hope this helps
    Ray Farmer
    Regards
    Ray Farmer

  • How do I install photoshop CS5 on my imac that does not have a DVD drive

    I have photoshop CS5 and just got new iMac that does not have the DVD drive. I would like to avoid having to purchase the external DVD drive. Does Adobe offer options that I can still download CS5 that I have purchased on my new machine?

    Marin bortnem you can download the installation files for Photoshop CS5 at Download CS5 products.

  • How to import iDVD app from Time Capsule to my new iMac 21" that does not have iDVD?  I can find the iDVD app in the Time Capsule, then what?

    I have a new 21" iMac to replace a 6-year old iMac 24.  My Time Capsule has the iDVD app saved (?) and I can find it, but I can't figure out how to move it to my new iMac that does not have the app.  How to do this?

    You are probably better to install it from ilife disk.
    Can't Find a update or latest Version of iDVD to Download or a Compatibility to Yosemite

  • How do I create an executable for a computer that does not have IVI drivers

    I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
    Thank you,
    Zach Oberman

    Zach,
    Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
    If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
    At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
    You may be able to obtain a traditional LabVIEW driver from
    Tektronix
    Developer Exchange
    Requesting a
    driver
    Other Resources
    Thanks,
    --Bankim

  • HT4519 how do i delete an email account? The one i want to delete is the only account that does not have a "delete" red bar??

    I have 6 email accounts on my iPhone 6 and want to delete one that is set up incorrectly. It is the only account that does not have the red DELETE bar...what do i need to do to delete it?
    It is hosted by GoDaddy, is this the problem?

    Thank you so very much! That was just what I needed to do, problem solved.

Maybe you are looking for

  • AR Reserve Invoice - Posting date

    Hi, I have a customer who really would like to address the issue with the posting date on AR Reserve Invoices, because they think this field should be open for editing until the invoice has been paid. Is there a good reason for why the posting date f

  • Why my subscription is not showing up in my Androi...

    I bought a Skype Unlimited World premium subscription few days ago, it's showing up via my computer/web browser login, but when I logged onto the same Skype account on my Galaxy Note 3, the subscription did not show up there, and I can't make calls. 

  • Monitor FLV download

    Can anyone tell me how to do this? It seems like it should be incredibly simple. I started trying about 4 hours ago and thought I'd be done in 4 minutes... I have an FLVplayback component that loads and plays an FLV file. Grand. What I want to do is

  • Would it be possible to add "creative cloud" as a source - and save place - for the Android Adobe Reader?

    Being a CC customer, I'd really like to keep some of my most used forms on my CC cloud. These are forms that I regularly need to update data in, while in the field, and using my android tablet (instead of my laptop) for this purpose would be extremel

  • Usage of weblogic.ejbc

    Hi Guys, Well i am trying to use weblogic.ejbc to generate the ejb container specific code and create a new jar file which i can deploy. But this command is throwing the following error shown below The jar file contains the ejb class files and the 2