Unlock BW object when transport is deleted

Hi Experts,
I have a BW Update Rule that has been locked under a transport request and this request was deleted. Can you tell me how I can unlock this object?
I tried SM12 and SE03 (nothing shows up under SM12 and I am not sure wht the transport request is to use SE03)
Thanks
Deepthi

Hi Deepti,
If i understood your question clearly....what i feel is when u said u r Update rule is saved under a request(this means u r update rule is locked under the XXX req)
when u say u have deleted the xxx request it means that u r update rule is free from locks.
So try activating and save u r update rule should ask for a new req.
or otherway which u must have been aware is collect that update rule in transport connection where u can see the status of u r update rule whether saved in any other transport req.
guess im clear in my explanation.
Regards
Ellora

Similar Messages

Handle metadata of configuration objects when transported from DEV to QA?

All,
I was reading this blog /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
<i>"Unlike IR when we import the scenarios in ID the configuration metadata will be lost and have to be manually entered in the QA ID. For Ex: Parameters like source directory, filename scheme, FTP server will vanish and have to be entered appropriately as required for QA sand box. After entering the metadata we need to activate all the scenario objects in the ID. After successful activation your interfaces are ready for testing."</i>
From the above I understand there are somethings(like adapter metadata..) that has to be entered manually when the objects are transported from dev to QA.
So my question is, for what all objects of ID needs metadata to be entered manually in QA.
Party?
Business systems(business systems, bus servcies, integration process)?
Communication channels?
Receiver determination?
Interface Determination?
Sender Agreement?
Receiver Agreement?
I appreciate your reply
Thanks
KK

Hi,
first of all it's not adapter's metadata
(adapter's metadata is something completely different)
the "thing" that will dissapear is the adapters'
configuration (configuration of your communication channels) - that's all
RFC destination (idoc adapter) ftp server (file adapter) etc.
basically all you need to do
is to fill it one every system (QAT, PRD etc.)
Regards,
michal

When should unlock the object and when should not ?

Dear Experts,
We are looking for some suggestions from your side.
When we should unlock the object and when we should not with respect to releasing the transport request.
Like what would be the best practice.
Thanks in advance.
With Regards,
Tejas Dave.

Hi Tejas,
When we are performing an upgrades , No Objects should be locked.
Gives an Pop to unlock the Objects
Every Transport Request will moves depends on Requirement .

Errors when transporting query

I face errors when transporting a query. I have checked the release and import logs and have noticed the following:
Release Log:
There are 5 query elements which have been deleted
Import Log:
The query is not active only a modified version of the query is present.
I am creating a new transporting and collecting the objects not including the deleted 5 objects since they do not exist in the dev system.
The problem that I have is that the majority of the objects are locked in a BEx transport.
The only option of unlocking is each of the objects from the BEx transport, locking in my transport. Is this the way to do this or is there any consequences or a better way?
Thanks

Hi
as you have transport request with all the collected objects, follow the below steps
1) goto SE03, in left side you will have option "unlock the objects from transport"
in the next screen give the transport request and execute
now activate the query once and goto transport connection in RSA1.
here collect your query into transport request.
release it and import the same into next system.
Regards,
Venkatesh

Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request

Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RS_PROGRAM_ERROR
Date and Time          08.02.2011 10:48:14
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
    along the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_RSDD_DS====================CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
    and therefore caused a runtime error.
    The reason for the exception is:
    Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
    If the error occurs in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
    "CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
    "APPEND_DS_TEC_FIELDS"
System environment
    SAP-Release 700
    Application server... "dp1ci"
    Network address...... "<removed>"
    Operating system..... "HP-UX"
    Release.............. "B.11.23";
    Hardware type........ "ia64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 45
    Shortdump setting.... "full"
    Database server... "spisap02"
    Database type..... "ORACLE"
    Database name..... "DP1"
    Database user ID.. "SAPBIW"
    Terminal................. " "
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 14 2009 20:47:35"
    create on........ "HP-UX B.11.23 U ia64"
    Database version. "OCI_102 (10.2.0.1.0) "
    Patch level. 236
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 700
    Operating system..... "HP-UX B.11";
    Memory consumption
    Roll.... 5979936
    EM...... 0
    Heap.... 1459888
    Page.... 40960
    MM Used. 6988880
    MM Free. 415648
User and Transaction
    Client.............. 000
    User................ "DDIC"
    Language key........ "E"
    Transaction......... " "
    Transactions ID..... "4D5111661004210BE10000000AFA2502"
    Program............. "CL_RSDD_DS====================CP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
     in "APPEND_DS_TEC_FIELDS".
    The main program was "RDDEXECU ".
    In the source code you have the termination point in line 61
    of the (Include) program "CL_RSDD_DS====================CM001".
    The program "CL_RSDD_DS====================CP" was started as a background job.
    Job Name....... "RDDEXECL"
    Job Initiator.. "DDIC"
    Job Number..... 10475900
Source Code Extract
Line SourceCde
   31         RAISE EXCEPTION TYPE cx_rs_program_error
   32           EXPORTING
   33             text = 'Invalid DSO subtype'.                   "#EC NOTEXT
   34     ENDCASE.
   35
   36 *   get table name from DDIC
   37     CALL METHOD cl_rsd_odso=>get_tablnm
   38       EXPORTING
   39         i_odsobject = n_infoprov
   40         i_tabt      = l_tab
   41       IMPORTING
   42         e_tablnm    = l_tablnm
   43       EXCEPTIONS
   44         OTHERS      = 1.
   45
   46     IF sy-subrc <> 0.
   47       RAISE EXCEPTION TYPE cx_rs_program_error
   48         EXPORTING
   49           text = 'Error in CL_RSD_ODSO=>get_Tablnm'.        "#EC NOTEXT
   50     ENDIF.
   51
   52     CALL FUNCTION 'DDIF_NAMETAB_GET'
   53       EXPORTING
   54         tabname   = l_tablnm
   55       TABLES
   56         dfies_tab = l_t_comp
   57       EXCEPTIONS
   58         not_found = 1
   59         OTHERS    = 2.
   60     IF sy-subrc <> 0.
>>>>>       RAISE EXCEPTION TYPE cx_rs_program_error
   62         EXPORTING
   63           text = 'Error in DDIF_NAMETAB_GET'.        "#EC NOTEXT
   64     ENDIF.
   65
   66
   67   ELSE.
   68 *   model table only needed for standard datastore objects, for
   69 *   write optimized DSOs target table is a changelog that is fully described by
   70 *   dta_pro (infoobjects)
   71     CHECK n_s_dta-odsotype = rsdod_c_type-standard.
   72
   73 *   get model table fields to add
   74     CALL METHOD cl_rsd_odso=>get_mod_tab
   75       IMPORTING
   76         e_mod_fld_ur = l_t_comp.
   77   ENDIF.
   78
   79 * according to T.B. ( 13.04.2007) the correct position is
   80 * not needed in the D version
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASET

Hi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David

Unlock objects from transport requests

Hi Gurus
I was doing the SAP_Basis support pack upgrade, in netweaver 7.1 and many of the objects seems to be locked in transport requests. as my understanding, i have two options only,
1. replease transport - but it can create issues to us, as that will automatically imported to the next system in teh landscape, so unwanted requests will move to QAs system
2. unlock objects from transport request.
So i did the second option, but it had a message that it can create inconsistencies in the system, do u know what all the meassures we need to take, if we unlock objects from the transport requests. Is it required to delete the transport requests,
by mistake , if someone releases the that transport, whether it will release the old object or the new object.
Please suggest what would be the best recomended approch by SAP
Bijoy Babu

Hi Bijoy,
Its better to release the TR and then delete the same from the queue before it is imported into the following system. This will avoid any inconsistancy when the TR released after the SP application.
Regards,
Varadhu

How to unlock objects in Transport Organizer?

I found a program to unreleased the objects. And create new TR so it wont affect the logs on the old TR#s. Do you think I'm doing the safe way?
Now, I need to delete and create another object(fmod, fgroup or table) to save it in a new transport request. My problem is the object I deleted is locked in the old TR # so it saves on the same TR. How will I unlock this object?
Actually, I made a program where I can modify TLOCK table that changes the TR# where it is locked. Is it also safe to forced change the TR?
Thanks guys!

Hi Maui,
To unlock a transport use goto se03 --> Request Task --> Unlock Objects
Eneter your request and select unlock and execute. this will unlock the request.
Cheers
VJ

IView and system admin objects appear changed or not registered when transported

Hi,
Recently we moved a few objects - iViews, pages and roles as epa and system admin objects as config archive and imported them manually to Test system. But when checked in the next landscape, the iView properties appear different. Eg. In Development system, the iView was unchecked for visibility option i.e. iView should not be visible. But when transported to test system, the property was checked and gave error. On reimporting, the same thing happened and we had to manually correct the property. This is not an expected behaviour and manual changes are not to happen after development changes.
Similarly, though config archive import showed the 2 new system objects in the respective location of Test system, the expected functionality was not working. I checked this by deleting one of them and manually creating the same entry and it worked fine. So I also had to delete the 2nd one and create a manual entry. The system admin objects we used pertained to System Configuration --> Content Mgmt--> Form Based Publishing --> Forms Availablity --> Folder Settings
We also moved kmcs and they are reflecting properly with correct folder permissions.
We don't understand why this is so occurring (iView and system admin entry appearing different or not getting registered )and never experienced such a case in previous projects. We don't want to face the issue going forward when transporting changes to staging and Prod systems.
Please assist as to what went wrong or any probable cause and solution for same.
Thanks,
Janani

Hi,
Has anyone faced such a situation before and know the reason for same ?
Regards,
Janani

Error when transporting object data

Hi,
i have installed version 7.1 over verison 7 azdobe livecycle designer, howeven after installation, i try to made some changes, but i got the following error
:" error when transporting object data", anyone familiar with this error?
Please help. Thanks

1) It seems that you have deleted a dependent info object from ODS in BW Dev. and so is the warning message that you have deleted that info object.
2) if you have made some changes in an ODS and want to transport those to quality then you should delete all data from that ODS in quality. Delete all tables in ODS.
3) You should activate update rules in development again and transport those with this request.
Error 8 is error caused due to missing objects. do check your request thoughly before you re transport it.
Hope this helps.
Regards,

How to delete bulk of objects from transport request?

Hi
I made some mistake in selecting the objects for transport, and now there are a lot of unwanted objects saved under the request number. I know the objects can be deleted from the transport request through SE01, SE09 and SE10. But none of these allows me to delete the request number because there are a objects under the request that has to be deleted first.
Is there any way by which i can delete the entire list of objects in one go rather than deleting them one by one?
Thanx
Sujai

Hi,
You have to Unlock the request before you deleting the request.
Goto SE03->Under Requests/Tasks Double Click on Unlock Objects (Expert Tool)-> enter the Request no you want to Delete and Click on Execute -. Click on Unlock.Now you can Delete that Request.
-Vijay

Transportation of deleted objects

Hello All,
some unnecessary Queries and workbooks are transported to Test system and then to Production.Instead of deleting them manually in each system,i think we can delete them in development and write to transport request and then transport it to test and production systems..
can anybody let me know the procedure?
Bye.

Hi Rakesh,
Normally you can use RSZDELETE for deleting queries and other reporting objects in Dev Also. If such a object was already transported before, you will automatically get a transport request for the deleted object. There is no need to goto the transport connection for that. After releasing and tranporting the request, the objects will automatically be deleted in the target systems.
If you clear your open bex request and then do the deletions that you want to do, the only things in your bex request will be the queries to delete. If it is collecting other objects that you don't want to transport, you can manually remove those objects from your transport.
Hope this helps,
Sudhakar.

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Error when transporting ODS Object

Hi All,
I got the following error when transporting ODS object.
"The creation of the export DataSource failed"
"RFC connection to source system QB1CLNT100 is damaged ==> no Metadata upload"
"Error when creating the export DataSource and dependent Objects. Error when activating ODS Object 0FIGL_O10"
Maybe somebody can help me.
Thanks a lot and appreciate that,
-Martin-

hi Martin,
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"<b>Error when creating the export DataSource and dependent Objects</b>". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.

No object can select when collecting objects for transport

Hi.Experts:
When I use RSA1 and want to collect objects for transport,I found that no objects can be found for some object type,such as ISTD/TRFN etc, any body who know this situation?
Best Regards
Martin Xie

Hi Martin,
best way to collect objects into transport request is throught RSA1 -> Transport connection.
in Transport connection, you have different options to collect objects into transport request.
In data flow before...
here you can see objects that are already have transport request, package...
Regards
Daya Sagar

Why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all!

why can't i empty my trash bin? it prompts me to dele ''all locked items'' or ''unlocked items''...when i click delete ''all''...it runs up to a total of approx 29000 items, yet it does not remove it securely or at all! I am running OS X YOSEMITE

Trash – Empty When File is Locked or in Use
Try holding down the option button while trying to delete the Trash. If that doesn’t work, here is some more information.
Trash FAQ
Trash Permission Error
Trash Permission Error (2)
Trash Permission Error (3)

Unlock BW object when transport is deleted

Similar Messages

Maybe you are looking for