Unlock images in Windows 7 and CS5

I can not unlock images. I tried to unlock the read only box. No luck. I might need to check the property security boxes. Which ones do I check. Windows says be careful what to uncheck or check.
Help
Julie

Hi,
1&2;
We could follow the procedure talked in the below article to enable bitlocker through group policy:
Cannot Save Recovery Information for Bitlocker in Windows 7
Bitlocker is not available in Windows 7 professional, only available in Ultimate and Enterprise, and yes we could do bitlocker in Windows server 2008 R2 environment on Windows 7 and Windows 8.1. There are some new changes made in Windows 8 / Windows 8.1,
if we want to configure new policies, then we should consider to use Windows Server 2012/2012 R2, See:
What's New in BitLocker for Windows 8 and Windows Server 2012
What's New in BitLocker for Windows 8.1 and Windows Server 2012 R2
3.
For MBAM and its advantages, we may take a look at the following article:
Microsoft BitLocker Administration and Monitoring (MBAM)
4.
We could enable BitLocker without TPM: Allow BitLocker Without A Compatible TPM
5&6.
We could manage TPM using
tpm.msc
If we have policies configured well, then the client side is not able to make changes to the settings.
7.
We might take a look at the following article:
How to backup recovery information in AD after BitLocker is turned ON in Windows 7
8.
For MBAM stuff, see:
Microsoft BitLocker Administration and Monitoring
Here is another article about BitLocker FAQs:
BitLocker Frequently Asked Questions (FAQ)
What are the Top Issues for Bitlocker?
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Windows 8 and CS5

Hi, I recently installed windows 8 and afterwards my Adobe CS5 didn't work anymore. I tried to reinstall but I get a fatal error during the installing process. Can anyone help me?

Ok thanks, I Will try this as soon as possible!
Verstuurd vanaf mijn iPad
Op 11-nov.-2012 om 13:44 heeft "Mylenium" <[email protected]> het volgende geschreven:
Re: Windows 8 and CS5
created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
CS5 is not officially tested and certified for Win 8. You may try compatibility modes and turning off al lsecurity stuff, but should be prepared that it may never work.
Mylenium
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4838349#4838349
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4838349#4838349
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4838349#4838349. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Windows 8 and CS5/CS6

Hi
I'm buying a laptop for my son who uses either CS5 or CS6. Could someone please tell me if there are any issues with installing and running either on a laptop running Win 8. The laptop we are looking at is a gaming one which has a dedicated graphics card, and 16gb RAM. I have reviewed the forum content and have been able to isolate two key items being the graphics card and how to install...
What graphics cards are compatible? this seems to be the bioggest issue with Win8????
Does anyone know of any graphics cards that are known not to be compatible? (sometimes a card may still be ok even if it is not on a list of compatible ones)
He would need to install the app under the compatability mode option - am I right?
Has anyone identified any other issues??
Thanks everyone!

Ideally there should be no issue running either on a Windows 8 system. CS6 is the most recent version and been tested and confirmed to be compatible with Windows 8. CS5 will work but you might have to use the compativility mode. If you search this forum using the Ask A Question field at the top of the forum page, and enter CS5 Windows 8, you will find several results supporting it.
As far as the graphics card goes, I am not tech savvy enough to answer beyond remembered hearsay, but I believe a gaming graphics card is one of the better choices all around.

What is the right way to do a sysprep Image for Windows 7 and 8

Hi,
i´d like to know which way is the right one to do a sysprepp from an System with Windows 7/8.
Is it ok when I install the system with all drivers/patches etc. and after that I will open a command prompt with admin rights and choose the settings OOBE and Genrealize and Shutdown.
After that I create an Image with ImageX or Acronis and I´m ready to deplay it right? The local user which I created during the installaton should stay as an Supportuser.
So is ok or is there something wrong. Microsoft itself shows this way here:
http://technet.microsoft.com/en-us/windows/ee530017.aspx
But they write a lot of other faq´s where they discribe other ways. So what is now right and wrong?
Please don´t le my die stupid ;)
Regards,
The Core

Hi,
Any update here? Have you checked the links above?
Regarding your concern, it is OK to install the drivers or patches before you Genrealize the image. And if we want to keep the drivers during sysprep in order to use it on the computers with the same hardware configuration, we should specify
PersistAllDeviceInstalls to true.
Important: When you set up your reference computer, Windows Setup installs drivers for any detected devices. By default, Windows Setup removes these drivers when you generalize the system. If you're deploying the image to computers that
have the same hardware and devices, you'll want Windows Setup to reinstall these same drivers. To keep these drivers on the computer during system generalization, set the Microsoft-Windows-PnPSysprep |
PersistAllDeviceInstalls setting to true.
The video shows the general steps using sysprep and imagex to capture the image. If you have no special requirements for drivers, or some applications need to be specific, just follow the steps. OOBE is a simple booting process, and audit mode is a process
to specific the image. More information, see:
Customize Windows in Audit Mode
Any other concerns?
Best regards
Michael Shao
TechNet Community Support

Windows 8 and CS5.5 Design Premium

I got a new computer for Christmas and it is running Windows 8. Do I need any updates for my CS5.5 Design Premium? The Adobe Flash Catalyst does not appear to be installing properly and the "Read Me" documentation does not address Windows 8 issues.

Sorry, but Flash Catalyst was discontinued by Adobe, and will not be supported on newer operating systems.
Chris Griffith

How to drag and drop image between Windows platform and VM

Thanks.

Hi Deer2000,
There are several things you need to do first. You need a Transferable that can provide the image data in a format that the application likes. You will not be able to drop a serialized ImageIcon onto a native app for example. Most won't accept a binary stream even if you declare it's MIME type (e.g. image/jpeg) either.
You need to know what the native "clipboard" formats are. For example on Win32, DIB (device independent bitmap) and BITMAP are clipboard image formats. Learn the format and write an InputStream the can provide it. Then add your stream to a FlavorMap.
What is a FlavorMap and why do I need one?
Most native apps don't understand MIME types for data transfer. They have their own "clipboard" types. Java DataFlavors are based on MIME types. In order to provide a mapping between the win32 format TEXT and MIME types text/plain;charset=ascii you create a FlavorMap. Actually the default system flavormap does this type for you.
An easy way to add mappings is to edit $JDKHOME/jre/lib/flavormap.properties. For our custom image stream we've added the following entry:
DIB=image/x-win-bmp;class=com.rockhoppertech.dnd.datatransfer.BitmapInputStream
Other Win32 clipboard formats are:
WAVE
RIFF
PALETTE
ENHMETAFILE
METAFILEPICT
DIB
TIFF
Or please refer this URL, which gives a good idea about drag and drop in Java
http://www.rockhoppertech.com/java-drag-and-drop-faq.html
I hope this will help you.
Thanks
Bakrudeen

A few question about iPhone OS in CS5 and CS5 in general.

Hi,
I'm an IT trainer and I am trying to introduce my students to programming for iPhone/iPod Touch. (They are Secondary 2 students. 14 years old) The school is using a windows computer and CS5 right now is the best for the class (Not a steep learning curve and a user-friendly program). I know about the problems over the iPhone OS in CS5 with Apple but I was told it is still available for use. Furthermore, we have no intention of bringing the apps created to the Apple Store. I've tried the trial version and before I make any purchase, I would actually like to ask a few questions.
Is the iPhone OS in the trial version itself complete? Is there anything left out from the trial version because when I tried it, it seems fine however I did not try publishing to an iPhone due to the certificates. Is there a reason for the certificate? Is there any way around it because if there isn't do I need to get a certificate for every single student? (I'm looking at a class of 40 students.) Is the certificate available for windows platform?
Lets say, I got myself a certificate, create a simple program and then publish it, can I immediately bring it over to iTunes and then sync? Will it work that way? I don't want it to be too tedious for the students to see the end result. I've done quite a few research and have come across people having problems bringing it into their devices. Those people mention about bringing it to Cydia and needing to jailbreak the device. The devices made available for the students are not jailbroken. Will iPhone OS with proper certification still need Cydia for use with their device? Will only jailbroken device allow a CS5 app? I hope you get what I'm trying to say. We as trainers do not support teaching students to jailbreak, so that's definitely a no-no.
Another thing about CS5. Previously I have called customer support about the CS4 the school is using now and the problem with nested animation when publishing the animation as a video file, is this problem still in CS5? Does CS5 allow nested animation to be published as a video file? If it isn't, is there any way around it?
Thank you for your time and patience in answering my questions.
Regards,
Shafuraa

Dear Marco,
Thanks for th links, its quite handy. One more help required from you as its related to Idsktune. I was just reruning the idsktune on Soalris 10 box where zfs file system used, and able to see the below warning
WARNING: largefiles option is not present on mount of /, files may be limited to 2GB in size.
Could you tell me this alert specific to zfs file system, I was searching the mount parameter options specific to file size, but not able to get anything. Below are the system parameters.
bash-3.00$ ulimit -a
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
open files (-n) 256
pipe size (512 bytes, -p) 10
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 29995
virtual memory (kbytes, -v) unlimited
In UFS file system I have noted, for such largefile option we are adding the "largefile" parameter in mount, below is such an example.
/var/crash on /dev/md/dsk/d40 read/write/setuid/devices/intr/largefiles/logging/xattr/onerror=panic/dev=1540028 on Thu Aug 19 14:54:11 2010
Could you guide me on this file size warning specific to zfs file system.
Many thanks in advance for your support,

14gb image + quick select = appcrash on CS6 and CS5

So how do I troubleshoot this? Pretty much the first time I've come up with something that will predictably crash PS over and over.
Not sure if any of this helps:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Photoshop.exe
Application Version:    13.0.0.0
Application Timestamp:    4f551de1
Fault Module Name:    Photoshop.exe
Fault Module Version:    13.0.0.0
Fault Module Timestamp:    4f551de1
Exception Code:    c0000005
Exception Offset:    0000000001846a8d
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    c8cc
Additional Information 2:    c8ccb2b4ede621d3ed975389e6b4e37b
Additional Information 3:    5a99
Additional Information 4:    5a995493be8a06cdbd26a59ae3f908cd
That makes me curious if I've hit a wall here...
System info - Win7 pro Dell i7quad, 24gb ram, SSD boot, 10k scratch, + 5,4k scratch, 10k data disks
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:12, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2660 MHz
Built-in memory: 24574 MB
Free memory: 21708 MB
Memory available to Photoshop: 22276 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: Quadro 2000/PCI/SSE2
Display: 2
Display Bounds:= top: 0, left: 0, bottom: 1200, right: 1920
Display: 1
Display Bounds:= top: 82, left: -1280, bottom: 1106, right: 0
Video Card Number: 1
Video Card: NVIDIA Quadro 2000
OpenCL Unavailable
Driver Version: 8.17.12.5929
Driver Date: 20100805000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1280 x 1024 x 4294967296 colors
Video Card Caption: NVIDIA Quadro 2000
Video Card Memory: 1024 MB
Video Rect Texture Size: 16384
Serial number: Tryout Version
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\APC327\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
D:\, 279.5G, 267.9G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   5,0,10,0
   AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
   BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
   CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1640
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
   wu3d.dll   U3D Writer   9.3.0.113
Required plug-ins:
   3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   ADM 3.11x01
   Angled Strokes 13.0
   Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.0
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Embed Watermark 4.0
   Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Extrude 13.0
   FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mezzotint 13.0
   Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Pinch 13.0
   Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.0
   Shear 13.0
   Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Sumi-e 13.0
   Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   Wind 13.0
   Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
   ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

"Map of the entire planet, eh?"
Na, just a .5ft pixel res mosaic of Presque Isle PA. Lake Erie needs a bit of a touch up and I thought it would be nice to have at it in one file. Looks like I'll have to do it in pieces or not use quick select?
"24 GB of RAM isn't really a lot for editing a 14 GB file."
That's all that will fit in this box, and I'm stuck with it for 3 years unless the company has an extraordinary year.
File info - 8000x6400px, 8bit srgb, 9 layer PSB with about 1/3 of the image area being white and transparent pixels. When open and doing nothing it's taking up 2 scratch files totaling around 68gb.

Windows 7 and HP Image Zone software

I have a new Pavilion s5212y w/Windows 7 and an HP Photosmart 8450 printer that comes with HP Image Zone software for editing pictures. The software isn't supported by Win 7, won't install (tells me to upgrade op-sys). Is there a work around for this or will the software be made compatible with the new system? Don't misunderstand, the printer works fine, it's just that I can't use the software to edit pictures before printing. Thanks.

I just bought a used HP Officejet 5610 The situation was that I had a new Windows 7 machine that no longer worked with my old nice Canon scanner and my HP 5550 printer had broken cradles so I bought a used HP Officejet 5610 and was able to save/refill the color cartridge from that and I had a working black cartridge from my 5550 that worked with the 5610. On the whole, I am stoked-- it works well. The new old machine has a much better cradle design than the old old machine, but I still miss my OmniPage OCR software that came with my old Canon Scanner and will not work with Win 7 and Ominipage costs more new than I paid for my scanner in the first place, like 150 bucks. I too have been looking for cheap OCR ware again. I am told there is a small OCR applet that comes with Microsoft office that works well with tiff files only. So if you already have Microsoft Office you already own it. I'll try the Picaso software from google I guess. The fax and scan software that comes with Win 7 works with my scanner, but only produces low res jpg files. I understand that my 5610 likes working with Adobe Photoshop. I have copy of Photoshop Elements that hopefully will work with Win 7. I will also try that. thanks folks.

How to change screen refresh rate in windows 7sp1 and windows 8.1 iso image using dism

sir when i install windows 7sp1 and windows 8.1 then after the completion of setup when first time windows boots up then task bar is not shown and display is not clear and when i check under monitor settings the screen refresh rate is 60 Hertz and when i
set the screen refresh rate from 60 Hertz to 75 Hertz, then everything is OK, plz tell me why this happens?
why windows 7 sp1 and windows 8.1 automatically sets the screen refresh rate to 60Hertz instead of 75Hertz.
how can i set screen refresh rate 75 Hertz permanently in iso image using DISM ?

That is not a function of DISM. Resolution and refresh rate capabilities can be determined by multiple causes. Drivers are one, another is that most modern displays will report their capabilities to Windows.
You can specify display settings with an answer file however:
<Display>
<HorizontalResolution>640</HorizontalResolution>
<VerticalResolution>480</VerticalResolution>
<ColorDepth>16</ColorDepth>
<RefreshRate>60</RefreshRate>
</Display>
http://technet.microsoft.com/en-us/library/ff716344.aspx

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the Mac, they are all locked. Help, please. Thanks

I had all photos on a Windows desktop. Got a mac laptop, installed LR5, and put all images from Windows onto an external hard drive. When I go to import them into LR on the mac, they are all locked. Help, please!

"I plugged the external into the Mac and moved a folder of images onto the desktop. It looks like it went from read only to not locked. Is this possible?"
Yes, that's exactly what happened. If you buy another drive, you could copy from your existing drive to the new and your files will be read/write. The new drive will have to be formatted as an HFS drive (that's the Mac's format). If you need to format it, you use Disk Utility which is in the Utilities folder on your Mac. Be careful with that -- it wipes out whatever is currently on the drive. Make sure you format the right drive.
I keep all my images on an external drive, too. In fact, I have two matching drives and sync them so I always have a backup.

How to Set Image to Lock Screen and Background in Windows Store API?

How to set an image to windows lock screen and desktop background for windows store app in c#?
if changing lock screen is available in windows store C# how about changing the desktop background using Windows store C#?

Hi icce cage,
To change the Windows lock screen we can use this API:
LockScreen class with set image methods.
To change the desktop background, it is not possible as I know.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fit the image to window width, window height and the window size

hi all
here we wrote the code for "fit the image to window width, window height and the window size". we are facing some problems in it. and all these operations have to perform even after zooming operations are done.if the below code doesnt satisfy kindly provide appropriate code .
thanks .
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.awt.image.BufferedImage;
import java.io.*;
import javax.imageio.ImageIO;
import javax.swing.*;
import java.io.File;
import javax.swing.filechooser.FileFilter;
import java.awt.geom.*;
public class DP extends JFrame implements ActionListener,
                                           MouseListener,
                                           MouseMotionListener {
    private final int PEN_OP = 1;
    private final int CLEAR_OP = 2;
    private int radius;
    private int radius1;
    private int mousex = 0;
    private int mousey = 0;
    private int prevx = 0;
    private int prevy = 0;
    private boolean initialFreeHand = true;
    private boolean initialLine = true;
    private boolean initialEraser = true;
    private int Orx = 0;
    private int Ory = 0;
    private int OrWidth = 0;
    private int OrHeight = 0;
    private int drawX = 0;
    private int drawY = 0;
    private int polyX = 0;
    private int polyY = 0;
    private int eraserLength = 5;
    private int udefRedValue = 255;
    private int udefGreenValue = 255;
    private int udefBlueValue = 255;
    private int opStatus = PEN_OP;
    private int colorStatus = 1;
    private double zoomPercentage=10;
    private Color mainColor = new Color(0, 0, 0);
    private Color xorColor = new Color(255, 255, 255);
    private Color userDefinedColor =
        new Color(udefRedValue, udefGreenValue,udefBlueValue);
    private JButton openButton = new JButton("open");
    private JButton closeButton = new JButton("close");
     private JButton zoominButton = new JButton("ZoomIn");
     private JButton zoomoutButton = new JButton("ZoomOut");
     private JButton zoomto100Button = new JButton("ZoomTo100");
     private JButton fwwButton = new JButton("Fit window width");
     private JButton fwhButton = new JButton("Fit window height");
     private JButton fwButton = new JButton("Fit the window");
    private JButton clearButton = new JButton("Clear");
    private JTextField colorStatusBar = new JTextField(20);
    private JTextField opStatusBar = new JTextField(20);
    private JTextField mouseStatusBar = new JTextField(10);
    private JPanel controlPanel = new JPanel(new GridLayout(18, 1, 0, 0));
    JToolBar jToolbar = new JToolBar();
    private Container container;
    private JScrollBar horizantalSlide=new JScrollBar();
    public BufferedImage image;
    BufferedImage bgImage;
//    public ImageIcon icon=null;
    JFileChooser fileChooser;
    DrawPanel drawPanel = new DrawPanel(bgImage,zoomPercentage);
    public DP() {
        super("WhiteBoard");
        fileChooser = new JFileChooser(".");
        container = getContentPane();
        container.setBackground(Color.white);
        container.setLayout(new BorderLayout());
        container.add(jToolbar,BorderLayout.NORTH);
        container.add(horizantalSlide);
        jToolbar.add(openButton);
        jToolbar.add(closeButton);
          jToolbar.add(zoominButton);
          jToolbar.add(zoomoutButton);
          jToolbar.add(zoomto100Button);
          jToolbar.add(fwwButton);
          jToolbar.add(fwhButton);
          jToolbar.add(fwButton);
        jToolbar.add(clearButton);
        colorStatusBar.setEditable(false);
        opStatusBar.setEditable(false);
        mouseStatusBar.setEditable(false);
        controlPanel.setBackground(Color.white);
        drawPanel.setBackground(Color.white);
        container.add(controlPanel, "West");
        container.add(drawPanel, "Center");
        openButton.addActionListener(this);
        closeButton.addActionListener(this);
          zoominButton.addActionListener(this);
          zoomoutButton.addActionListener(this);
          zoomto100Button.addActionListener(this);
          fwwButton.addActionListener(this);
          fwhButton.addActionListener(this);
          fwButton.addActionListener(this);
        clearButton.addActionListener(this);
        drawPanel.addMouseMotionListener(this);
        drawPanel.addMouseListener(this);
        addMouseListener(this);
        addMouseMotionListener(this);
        opStatusBar.setText("FreeHand");
        colorStatusBar.setText("Black");
    public void actionPerformed(ActionEvent e) {
        if(e.getActionCommand().equals("open"))
            showDialog();
        if(e.getActionCommand().equals("close"))
            closeDialog();
          if(e.getActionCommand().equals("ZoomIn"))
               drawPanel.zoom(1);
          if(e.getActionCommand().equals("ZoomOut"))
               drawPanel.zoom(-1);
          if(e.getActionCommand().equals("ZoomTo100"))
               drawPanel.zoom(+10);
          if(e.getActionCommand().equals("Fit window width"))
               drawPanel.fitwindowwidth();
          if(e.getActionCommand().equals("Fit window height"))
               drawPanel.fitwindowheight();
          if(e.getActionCommand().equals("Fit the window"))
               drawPanel.fitthewindow();
        if (e.getActionCommand() == "Clear")
            opStatus = CLEAR_OP;
        switch (opStatus) {
            case CLEAR_OP:
                clearPanel();
    private void showDialog() {
        if(fileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION) {
            File file = fileChooser.getSelectedFile();
            try {
                bgImage = ImageIO.read(file);
            } catch(IOException e) {
                System.out.println("IO error: " + e.getMessage());
            clearPanel();
    private void closeDialog() {
        drawPanel.setVisible(false);
        drawPanel.repaint();
    public void clearPanel() {
        opStatusBar.setText("Clear");
        Graphics g = image.getGraphics();
        g.setColor(drawPanel.getBackground());
        g.fillRect(0, 0, drawPanel.getBounds().width, drawPanel.getBounds().height);
        if(bgImage != null)
            g.drawImage(bgImage, 0, 0, this);
        g.dispose();
        drawPanel.repaint();
    public boolean mouseHasMoved(MouseEvent e) {
        return (mousex != e.getX() || mousey != e.getY());
    public void setActualBoundry() {
        if (mousex < Orx || mousey < Ory) {
            if (mousex < Orx) {
                OrWidth = Orx - mousex;
                drawX = Orx - OrWidth;
            } else {
                drawX = Orx;
                OrWidth = mousex - Orx;
            if (mousey < Ory) {
                OrHeight = Ory - mousey;
                drawY = Ory - OrHeight;
            } else {
                drawY = Ory;
                OrHeight = mousey - Ory;
        } else {
            drawX = Orx;
            drawY = Ory;
            OrWidth = mousex - Orx;
            OrHeight = mousey - Ory;
    public void setGraphicalDefaults(MouseEvent e) {
        mousex = e.getX();
        mousey = e.getY();
        prevx = e.getX();
        prevy = e.getY();
        Orx = e.getX();
        Ory = e.getY();
        drawX = e.getX();
        drawY = e.getY();
        OrWidth = 0;
        OrHeight = 0;
    public void mouseDragged(MouseEvent e) {
        updateMouseCoordinates(e);
        switch (opStatus) {}
    public void mouseReleased(MouseEvent e) {
        updateMouseCoordinates(e);
        switch (opStatus) {}
    public void mouseEntered(MouseEvent e) {
        updateMouseCoordinates(e);
    public void updateMouseCoordinates(MouseEvent e) {
        String xCoor = "";
        String yCoor = "";
        if (e.getX() < 0)
            xCoor = "0";
        else {
            xCoor = String.valueOf(e.getX());
        if (e.getY() < 0)
            xCoor = "0";
        else {
            yCoor = String.valueOf(e.getY());
        mouseStatusBar.setText("x:" + xCoor + " y:" + yCoor);
    public void mouseClicked(MouseEvent e) { updateMouseCoordinates(e); }
    public void mouseExited(MouseEvent e) { updateMouseCoordinates(e); }
    public void mouseMoved(MouseEvent e) { updateMouseCoordinates(e); }
    public void mousePressed(MouseEvent e) { updateMouseCoordinates(e); }
    public static void main(String[] args) {
        DP wb = new DP();
        wb.setDefaultCloseOperation(EXIT_ON_CLOSE);
        wb.setSize(1024,740);
        wb.setVisible(true);
    private class DrawPanel extends JPanel {
        private double m_zoom = 1.0;
        private double m_zoomPercentage;
        private BufferedImage m_image;
        double theta = 0;
        double thetaInc = Math.PI/2;
        public DrawPanel(BufferedImage imageb,double zoomPercentage) {
            m_image = imageb;
            m_zoomPercentage = zoomPercentage / 100;
        protected void paintComponent(Graphics g) {
            Graphics2D g2d=(Graphics2D)g;
            if(image == null)
                initImage();
            g2d.setRenderingHint(RenderingHints.KEY_INTERPOLATION,
                                 RenderingHints.VALUE_INTERPOLATION_BICUBIC);
            double x = (1.0 - m_zoom)*getWidth()/2.0;
            double y = (1.0 - m_zoom)*getHeight()/2.0;
            AffineTransform at = AffineTransform.getTranslateInstance(x, y);
            at.rotate(theta,m_zoom*getWidth()/2,m_zoom*getHeight()/2);
            at.scale(m_zoom, m_zoom);
            g2d.drawRenderedImage(image, at);
public void zoom(int inc) {
        m_zoom += inc * m_zoomPercentage;
        repaint();
          public void fitwindowwidth()
            int w1=drawPanel.getWidth();
            int h1=drawPanel.getHeight();
            BufferedImage image2=image.getScaledInstance(w1,h1,Image.SCALE_DEFAULT);
            drawPanel.setPreferredSize(new java.awt.Dimension(100,image2.getImage().getHeight(null)));
           drawPanel.repaint();
          public void fitwindowheight()
       BufferedImage image2=image.getScaledInstance(500,680,1);
       drawPanel.setImage(iicon);
       drawPanel.setPreferredSize(new java.awt.Dimension(100,image2.getImage().getHeight(null)));
       drawPanel.repaint();
          public void fitthewindow()
       BufferedImage image2=image.getScaledInstance(1000,680,1);
       drawPanel.setPreferredSize(new java.awt.Dimension(100,image2.getImage().getHeight(null)));
       drawPanel.repaint();
        private void initImage() {
            int w = getWidth();
            int h = getHeight();
            image = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);
            Graphics2D g2 = image.createGraphics();
            g2.setPaint(getBackground());
            g2.fillRect(0,0,w,h);
            g2.dispose();
}

thank you for giving reply.
your code is very helpful to us.but i couldn't integrate it in my code.here's my code.
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import java.awt.image.BufferedImage;
import java.io.*;
import javax.imageio.ImageIO;
import javax.swing.*;
import java.io.File;
import javax.swing.filechooser.FileFilter;
import java.awt.geom.*;
public class IS extends JFrame implements ActionListener,
                                           MouseListener,
                                           MouseMotionListener {
    private final int PEN_OP = 1;
    private final int CLEAR_OP = 2;
     private     final int DISTORT = 3;
    private final int SCALE   = 4;
    private final int FIT     = 5;
    private final int FILL    = 6;
    int scaleMode = SCALE;
    private int radius;
    private int radius1;
    private int mousex = 0;
    private int mousey = 0;
    private int prevx = 0;
    private int prevy = 0;
    private boolean initialFreeHand = true;
    private boolean initialLine = true;
    private boolean initialEraser = true;
    private int Orx = 0;
    private int Ory = 0;
    private int OrWidth = 0;
    private int OrHeight = 0;
    private int drawX = 0;
    private int drawY = 0;
    private int polyX = 0;
    private int polyY = 0;
    private int eraserLength = 5;
    private int udefRedValue = 255;
    private int udefGreenValue = 255;
    private int udefBlueValue = 255;
    private int opStatus = PEN_OP;
    private int colorStatus = 1;
    private double zoomPercentage=10;
    private Color mainColor = new Color(0, 0, 0);
    private Color xorColor = new Color(255, 255, 255);
    private Color userDefinedColor =
        new Color(udefRedValue, udefGreenValue,udefBlueValue);
    private JButton openButton = new JButton("open");
    private JButton closeButton = new JButton("close");
     private JButton zoominButton = new JButton("ZoomIn");
     private JButton zoomoutButton = new JButton("ZoomOut");
     private JButton zoomto100Button = new JButton("ZoomTo100");
     private JButton fwwButton = new JButton("Fit window width");
     private JButton fwhButton = new JButton("Fit window height");
     private JButton fwButton = new JButton("Fit the window");
    private JButton clearButton = new JButton("Clear");
    private JTextField colorStatusBar = new JTextField(20);
    private JTextField opStatusBar = new JTextField(20);
    private JTextField mouseStatusBar = new JTextField(10);
    private JPanel controlPanel = new JPanel(new GridLayout(18, 1, 0, 0));
    JToolBar jToolbar = new JToolBar();
    private Container container;
    private JScrollBar horizantalSlide=new JScrollBar();
    public BufferedImage image;
    BufferedImage bgImage;
//    public ImageIcon icon=null;
    JFileChooser fileChooser;
    DrawPanel drawPanel = new DrawPanel(bgImage,zoomPercentage);
    public IS() {
        super("WhiteBoard");
        fileChooser = new JFileChooser(".");
        container = getContentPane();
        container.setBackground(Color.white);
        container.setLayout(new BorderLayout());
        container.add(jToolbar,BorderLayout.NORTH);
        container.add(horizantalSlide);
        jToolbar.add(openButton);
        jToolbar.add(closeButton);
          jToolbar.add(zoominButton);
          jToolbar.add(zoomoutButton);
          jToolbar.add(zoomto100Button);
          jToolbar.add(fwwButton);
          jToolbar.add(fwhButton);
          jToolbar.add(fwButton);
        jToolbar.add(clearButton);
        colorStatusBar.setEditable(false);
        opStatusBar.setEditable(false);
        mouseStatusBar.setEditable(false);
        controlPanel.setBackground(Color.white);
        drawPanel.setBackground(Color.white);
        container.add(controlPanel, "West");
        container.add(drawPanel, "Center");
        openButton.addActionListener(this);
        closeButton.addActionListener(this);
          zoominButton.addActionListener(this);
          zoomoutButton.addActionListener(this);
          zoomto100Button.addActionListener(this);
          fwwButton.addActionListener(this);
          fwhButton.addActionListener(this);
          fwButton.addActionListener(this);
        clearButton.addActionListener(this);
        drawPanel.addMouseMotionListener(this);
        drawPanel.addMouseListener(this);
        addMouseListener(this);
        addMouseMotionListener(this);
        opStatusBar.setText("FreeHand");
        colorStatusBar.setText("Black");
    public void actionPerformed(ActionEvent e) {
        if(e.getActionCommand().equals("open"))
            showDialog();
        if(e.getActionCommand().equals("close"))
            closeDialog();
          if(e.getActionCommand().equals("ZoomIn"))
               drawPanel.zoom(1);
          if(e.getActionCommand().equals("ZoomOut"))
               drawPanel.zoom(-1);
          if(e.getActionCommand().equals("ZoomTo100"))
               drawPanel.zoom(+10);
          if(e.getActionCommand().equals("Fit window width"))
               //drawPanel.fitwindowwidth();
          drawPanel.scaleImage(0,0,0,0);
          if(e.getActionCommand().equals("Fit window height"))
          drawPanel.scaleImage(0,0,0,0);
          if(e.getActionCommand().equals("Fit the window"))
          drawPanel.scaleImage(0,0,0,0);
        if (e.getActionCommand() == "Clear")
            opStatus = CLEAR_OP;
        switch (opStatus) {
            case CLEAR_OP:
                clearPanel();
    private void showDialog() {
        if(fileChooser.showOpenDialog(this) == JFileChooser.APPROVE_OPTION) {
            File file = fileChooser.getSelectedFile();
            try {
                bgImage = ImageIO.read(file);
            } catch(IOException e) {
                System.out.println("IO error: " + e.getMessage());
            clearPanel();
    private void closeDialog() {
        drawPanel.setVisible(false);
        drawPanel.repaint();
    public void clearPanel() {
        opStatusBar.setText("Clear");
          int w = image.getWidth();
        int h = image.getHeight();
        Graphics g = image.getGraphics();
        g.setColor(drawPanel.getBackground());
        g.fillRect(0, 0, w, h);
        if(bgImage != null) {
            int x = (w - bgImage.getWidth())/2;
            int y = (h - bgImage.getHeight())/2;
            g.drawImage(bgImage, x, y, this);
        g.dispose();
        drawPanel.repaint();
    public boolean mouseHasMoved(MouseEvent e) {
        return (mousex != e.getX() || mousey != e.getY());
    public void setActualBoundry() {
        if (mousex < Orx || mousey < Ory) {
            if (mousex < Orx) {
                OrWidth = Orx - mousex;
                drawX = Orx - OrWidth;
            } else {
                drawX = Orx;
                OrWidth = mousex - Orx;
            if (mousey < Ory) {
                OrHeight = Ory - mousey;
                drawY = Ory - OrHeight;
            } else {
                drawY = Ory;
                OrHeight = mousey - Ory;
        } else {
            drawX = Orx;
            drawY = Ory;
            OrWidth = mousex - Orx;
            OrHeight = mousey - Ory;
    public void setGraphicalDefaults(MouseEvent e) {
        mousex = e.getX();
        mousey = e.getY();
        prevx = e.getX();
        prevy = e.getY();
        Orx = e.getX();
        Ory = e.getY();
        drawX = e.getX();
        drawY = e.getY();
        OrWidth = 0;
        OrHeight = 0;
    public void mouseDragged(MouseEvent e) {
        updateMouseCoordinates(e);
        switch (opStatus) {
    public void mouseReleased(MouseEvent e) {
        updateMouseCoordinates(e);
        switch (opStatus) {}
    public void mouseEntered(MouseEvent e) {
        updateMouseCoordinates(e);
    public void updateMouseCoordinates(MouseEvent e) {
        String xCoor = "";
        String yCoor = "";
        if (e.getX() < 0)
            xCoor = "0";
        else {
            xCoor = String.valueOf(e.getX());
        if (e.getY() < 0)
            xCoor = "0";
        else {
            yCoor = String.valueOf(e.getY());
        mouseStatusBar.setText("x:" + xCoor + " y:" + yCoor);
    public void mouseClicked(MouseEvent e) { updateMouseCoordinates(e); }
    public void mouseExited(MouseEvent e) { updateMouseCoordinates(e); }
    public void mouseMoved(MouseEvent e) { updateMouseCoordinates(e); }
    public void mousePressed(MouseEvent e) { updateMouseCoordinates(e); }
    public static void main(String[] args) {
        IS wb = new IS();
        wb.setDefaultCloseOperation(EXIT_ON_CLOSE);
        wb.setSize(1024,740);
        wb.setVisible(true);
    private class DrawPanel extends JPanel {
        private double m_zoom = 1.0;
        private double m_zoomPercentage;
        private BufferedImage m_image;
        double theta = 0;
        double thetaInc = Math.PI/2;
        public DrawPanel(BufferedImage imageb,double zoomPercentage) {
            m_image = imageb;
            m_zoomPercentage = zoomPercentage / 100;
        protected void paintComponent(Graphics g) {
               super.paintComponent(g);
            Graphics2D g2d=(Graphics2D)g;
            if(image == null)
                initImage();
            g2d.setRenderingHint(RenderingHints.KEY_INTERPOLATION,
                                 RenderingHints.VALUE_INTERPOLATION_BICUBIC);
                          int w = getWidth();
                int h = getHeight();
              int iw = image.getWidth();
              int ih = image.getHeight();
              if(scaleMode == SCALE) {
            double x = (w - m_zoom*iw)/2;
            double y = (h - m_zoom*ih)/2;
            AffineTransform at = AffineTransform.getTranslateInstance(x, y);
            at.rotate(theta,m_zoom*getWidth()/2,m_zoom*getHeight()/2);
            at.scale(m_zoom, m_zoom);
            g2d.drawRenderedImage(image, at);
               else {
            scaleImage(w, h, iw, ih);
          private void scaleImage( int w, int h, int iw, int ih) {
                         Graphics2D g2d = image.createGraphics();
        double xScale = (double)w/iw;
        double yScale = (double)h/ih;
        AffineTransform at = new AffineTransform();
        if(scaleMode == DISTORT) {
            double x = (w - xScale*iw)/2;
            double y = (h - yScale*ih)/2;
            at.setToTranslation(x, y);
            at.scale(xScale, yScale);
        } else {
            double scale = (scaleMode == FIT) ? Math.min(xScale, yScale)
                                              : Math.max(xScale, yScale);
            double x = (w - scale*iw)/2;
            double y = (h - scale*ih)/2;
            at.setToTranslation(x, y);
            at.scale(scale, scale);
        g2d.drawRenderedImage(image, at);
public void zoom(int inc) {
        m_zoom += inc * m_zoomPercentage;
        repaint();
        private void initImage() {
            int w = getWidth();
            int h = getHeight();
            image = new BufferedImage(w, h, BufferedImage.TYPE_INT_RGB);
            Graphics2D g2 = image.createGraphics();
            g2.setPaint(getBackground());
            g2.fillRect(0,0,w,h);
            g2.dispose();
}

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

Using Windows 7 and Firefox 10.0.2, at random times all home page images "disappear" when switching between web sites. Page layout on some web sites is lost. Requires removing and downloading Firefox to restore. Any ideas?

I have recently (6 months ago) purchased and use an HP Pavilion desktop with Windows 7. At times, when especially active (several windows open) and switching between windows or using links to connect with another web page, all the images on the home home page "disappear", that is to say there is space, but no image, as if the page did not load correctly. When this happens, pages other than the home page also do not display images.
Same pages display correctly in Explorer whenever this happens.

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

Unlock images in Windows 7 and CS5

Similar Messages

Maybe you are looking for