Unlock j2ee_admin

Hi ,
I followed the steps mentioned elsewhere to unlock j2ee_admin, and was able to logon using sap* to http://hostname:50200 -> Netweaver administrator -> System Management -> administration -> Identity Management.
However, when I am trying to change the j2ee_admin password, I am getting the error
An error occurred in the persistence. The original message (possibly not translated) was: "Attribute "lockreason" on namespace "com.sap.security.core.usermanagement" of principal "UACC.R3_DATASOURCE.J2EE_ADMIN" is not modifiable.". Contact your system administrator
Please advise.
Thanks,
Abdul

Hi
Go thru the link,
J2EE_ADMIN password change problem
Regards,
Srinivasan T

Similar Messages

Solution Manager 7.1 upgrade,j2ee_admin is locked

Hello ,
I am in the middle of solution manager 7.1 upgrade and running into execution phase now. but my j2ee_admin password is locked.
I want to unlock and reset the password but this is what happening .:
1. I try to login with old j2ee_admin password but it is not correct.
2. I re-check with updating same to configtool but no luck
3.I have enabled emergency SAP* ID and can login to Visual Admin so
4. when I try to access UserAdmin so that I can unlock j2ee_admin it gives me error as Application error occurred
during request processing
Is there any way to reset /Unlock j2ee_admin even though NWA/ user admin is not available.
Please help me so that I can move ahead with upgrade
Thanks,
Supriya

Hi Supriya,
Hope you are doing good.
What is the status of the upgrade; is the UME still ABAP ? If so just login to the backend ABAP server/client and unlock j2ee_admin.
Else login to visual admin and there is a security provider in the services where you can unlock the user.
Hope this helps.
Kind Regards,
Hemanth
SAP AGS

Intresting J2ee_admin has no RFC authorization for SYST

Hi All,
In my dev server, in the runtime workbench ->Component monitoring -> the adapter engine -> Is a user defined for component AF ?
Error 1: It says J2ee_admin user is locked ( i have unlocked it in SU01 for several times and again it gets locked back after some time) can some one kindly give what is the reason for this ?
I am sure this is not caused by manual wrong password login's and we have not changed the password from long time and we r still using the same old password.
Error 2: After i unlock j2ee_admin, it says "J2ee_admin has no RFC authorization for SYST"
J2ee_admin currently has the following roles
SAP_J2EE_ADMIN and SAP_S_RFCACL
Administrator role on Java side
when i assign SAP_ALL to the j2ee_admin, this works fine with out any error.
I am suprised that same j2ee_admin works successfully in QA and PRD boxes with out SAP_ALL authorization ( with only one role SAP_J2EE_ADMIN)
Note: My security lead is not allowing me to use SAP_ALL for DEV box as j2ee_admin on QA and PRD does not contain SAP_ALL ? Java role (administrator is same on all DEV, QA and PRD)
Can u please help me on this ?
Thanking you in advance.
Regards
Sonali

Hi Sonali,
It says J2ee_admin user is locked ( i have unlocked it in SU01 for several times and again it gets locked back after some time) can some one kindly give what is the reason for this ?
Please check whether usertype is Dialog or not. If it is not dialog change it.
Regarding your issue J2ee_admin has no RFC authorization for SYST:
This is described in SAP note 460089. You need S_RFC, please see the
note for details.
Hope it resolves your issue.Please let me know if you still any issues.
Thanks
Kishore

J2EE_ADMIN locked during the upgrade and can not reset it

Hello All,
I am doing Solution Manager upgrade and it is stuck because j2ee_admin password is not correct.
I want to unlock and reset the password but this is what happening .:
1. I try to login with old j2ee_admin password but it is not correct.
2. I re-check with updating same to configtool but no luck
3.I have enabled emergency SAP* ID and can login to Visual Admin so
4. when I try to access UserAdmin so that I can unlock j2ee_admin it gives me error as Application error occurred
during request processing
Is there any way to reset /Unlock j2ee_admin even though NWA/ user admin is not available.
Please help me so that I can move ahead with upgrade
Thanks,
Supriya

Hi Supriya,
What phase of your upgrade are you at ?
Is your ABAP stack still up ?
If your ABAP is still up then unlock the user with tx SU01.
KR,
Amerjit

XI 7.0 Visual Admin issue

Hello,
I am trying to install XI 7.0 (NW 2004s). The installation was error-free. However, while doing post installation steps, Visual Admin threw a 'Session expired' error. Since then, I am unable to login to Visual Admin using J2EE_ADMIN (throws "Authentication did not succeed" error). I have activated SAP* user using configtool, and unlocked J2EE_ADMIN. I have also changed J2EE_ADMIN password several times using SAP GUI.
But still, the error persists.
Please let me know if anyone has a solution.
Thanks in advance
Partha

Hi Partha,
Try opening Visual Admin if your not able to login with username(administrator) and password. Problem with NWD2004s do the following steps.
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
Now ur able to login visual admin right follow the steps:
Try here If ur not able to login http://<server name>/irj/portal :home page using (username)administrator and password
do the following steps(user locked).
(**Administrator locked so we have enable superadmin and unlock the administrator and again diasble the super admin
then only can able to login using administrator**)
=>Activating emergency(super admin) user:-
1. Start configtool
2. set the following properties: [Instance_ID<ID> -> Server_ID<ID> -> services -> com.sap.security.core.ume.service]
a. ume.superadmin.activated - true
=>i doubht here did u saved properly
b. ume.superadmin.password - <password> [set the password->click set button->
it will again ask by open popup window type the same and it will say restart to reflects]
3. Restart Java Application server
Unlocking administrator:
Login to Portal Page => http://<severname>/irj/portal
Give username:SAP* and password which u typed
=>under user management tab ->click on search user left pane -> search label followed by input field will be there ->give * in inputfield and click search button->
you can we view ALL users and roles etc.
select user administration by clicking on check box ->modify->reset the password->save properly
Again diable super admin go to
1. Start configtool
2. set the following properties: [Instance_ID<ID> -> Server_ID<ID> -> services -> com.sap.security.core.ume.service]
a. ume.superadmin.activated - false->save it will ask u restart is must for reflect the settings
3. Restart Java Application server
Go to http://<severname>/irj/portal
Give username:aministrator and password which u typed
hopefully i should solve ur problem
Regards, Suresh KB

Start of UME Service Failed". Technical details: 'password' missing

Hi, I am facing a problem with UME Configuration of a Double Stack ABAP+Java Netweaver 7.01 System.
The Java Engine won't come up.
Though I have unlocked J2EE_ADMIN, J2EE_GUEST and SAPJSF in the ABAP User Management, after Restart of J2EE-Cluster the J2EE Engine doesnt't come up with the following Error (in std_server0.out):
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: 'password' missing at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398) at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31) at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214) at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144) at com.sap.engine.frame.core.thread.Task.run(Task.java:64) at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83) at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:156) Caused by: com.sap.security.core.persistence.datasource.PersistenceException: 'password' missing at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236) at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491) at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.(PrincipalDatabagFactoryInstance.java:446) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117) at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63) at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221) at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287) ... 6 more [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. Jun 16, 2010 8:07:30 AM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_59] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
When I try to reset the password of J2EE_ADMIN in the configtool the following message appears: "The value is different from previous!" Maybe this is 'cause I chose a password that I've used sometimes before, but when i enter something like '123456' or 'geheim' or something else the same message appears.
Please tell me how i can resolve the "The value is different from previous!"-Problem, because it's really critical by now. Thanks for your help.
regards,
Carsten

Hi Blanca,
First I have to thank you for your answer.
I followed the steps you provided:
the master client in the system is 100.
In client 100 the users SAPJSF, J2EE_ADMIN and J2EE_GUEST exist and are active.
I reset the password of SAPJSF on the ABAP side and after that in configtool i adjusted the values for
ume.r3.connection.master.client (100) and ume.r3.connection.master.user (SAPJSF).
But when it comes to save a new value for the *.master.passwd the same error appears.
"The value is different from previous!".
Any ideas?
thanks beforehand and regards
Carsten

SLDDSUSER not exist in client 800 and in java VA,but exist in client 001.

Dear friends,
                      I am trying to confiure ESS in my ECC6 system. Previously due to lock issue in J2EE_ADMIN user, I start use SAP* user and cofigure. That time i can able to see SLDDSUSER in my sap client 800 and in java visual admin as well and I have created all relevant JCO connections for ESS.All went fine.
                              But since Sap* lock all other users , i tried to fix that J2EE_ADMIN user.Fortunately I unlock J2EE_ADMIN user and change password as well. With J2EE_ADMIN i can abpe to connect portal as well. But in webdynpro content adminstration screen ,now I can see that check jco connection test only enabled and other buttons maintain Jco detinations are disabled and all my previously created Jco connections gone.
                     After go through SDN documents, i try to use SLDDSUSER for SLD setup. But suprisingly I could not see SLDDSUSER in client 800 as well as in visual admin .But previously I saw in both area. Now only in client 001 SLDDSUSER exist. But i am using client 800 only.Please advice how to proceed further.
Regards,
HockTeck.

check here
System Landscape Directory (SLD)
ttp://wiki.sdn.sap.com/wiki/display/SL/Home
Software Logistics

JMS error while configuring SLD

HI folks,
I'm, encountering a tricky problem while connecting the SLD to the SolMan - running on the same host.
During making all neccessary steps it was no longer possible to log on to the
J2ee-Engine by /nwa or whatever application.
It just shows User locked or ONKNOWN ERRR
We unlocked the J2ee_admin again (strage, because the cause in Configtool was "locked after 0 unsuccessfull logins" weired! )
Then unset again the Superadmin, restartet the server... and again:
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: JMS error.
Back to Superadmin Mode, Unlocking J2ee_admin, starting application manually in this mode, it comes up - I can see a loginscreen again but of course cannot login while superadmin mode is active...
After restarting cluster... same effect.
It seems, that the JMS cannot start due to locked User J2ee_admin and afterwards no other application is able to run.
Does anybody know, why this User J2ee_admin might be locked just before the JMS Service is started ?
Many many thanks in advance for any hint. Struggling since 2 days with this issue.
Nicolas

Problem is solved... Logging in to Abap Part in UME-Linked CLient 001 and unlocking j2ee_admin did what VA was not able to...

Read-only mode. Object is currently locked by user: J2EE_ADMIN. hw 2 unlock

Hi friends,
<b>i am not able to edit my object in EP</b> , it says
Read-only mode. Object is currently locked by user: J2EE_ADMIN.
how do i unlock it ?
i am on 04s SP9

Hi Rohit,
Navigate to
system_admin -> Monitoring->
Portal->object_locking->
There you can view your locked pcd object.Just check it and Unlock.
That should solve your problem.
Hope this helps
Regards
Vineeth

How to Unlock J2EE_GUEST user in portal

Hi
In my Portal "J2EE_GUEST' user is locked as a result i can't able to see the list of system avaliable in Visual Composer
When i tried to unlock the JE22_GUEST user in portal it is not allowing me to unlock the user
Please advise how can i unlock the J2EE_GUEST user in Portal
Thanks

Hi,
Incase if you are having the dual stack, ABAP+ JAVA , you can logon to the ABAP system using either the J2EE_ADMIN or DDIC and use the Tcode -SU01.
As soon as you log on to SU01 you would be asked to enter the user name .
Enter J2EE_GUEST and on the top right hand corner you have an option unlock.
As soon as you unlock, on the left hand side to unlcok, there is a change password option, you can also reset your password there.
Else log into the portal with a J2EE_ADMIN role and in user administration unlock the user
Hope this helps.
Cheers,
Sandeep Tudumu

Impact of J2EE_ADMIN / Administrator user getting locked

Hi,
What is the impact of J2EE_ADMIN / Administrator user getting locked in abap / java engines? Will it effect startup of java server processes or java applications? What are the other implications?
Thanks,
Abdul

Hi Abdul,
if the J2EE_ADMIN or Administrator user is locked then
1. you cannot login to Visual Admin unless you define some other user with same authorization.
2. any Jco-RFC using this user won't work.
3. if you don't have any other user, you will have to activate SAP* user to unlock this user.
Thanks,
Sandeep

J2ee_admin keeps getting locked

Hi,
I changed the j2ee_admin password in both the secure storage of Java AS and in ABAP. Our SLD connection also seemed to use the j2ee_admin user in tx SLDAPICUST which I also changed but still it gets locked each time! SAPJSF user reports the locked j2ee_admin account in the syslog after awhile when unlocking it.
Where else could j2ee_admin be possibly being used where I still need to change the password ? ..or any other log files on Java AS that could tell me of errors or give me more info ?
Thanks!
Regards,
Nelis
Sorry, not sure if this is the right place to post this question.

Hello Neil,
When you log into R/3 and go to transaction SU01 does the j2ee_admin user show up "locked"? In addition to changing the password did you remember to unlock the user. Also, you might try changing the user type from dialog to system in su01. If you have a security policy that requires the password to be changed at first logon or after a period of time, this could cause the logon failures. Changing the user type to system or communication type will avoid the forced password changes for j2ee_admin.
If the issue continues to occur you should check the ./cluster/server#/log/defaultTrace.#.trc for exceptions regarding the j2ee_admin user. Another useful log is the ./cluster/server#/log/system/security.#.log which will show details more specific to the security provider.
Regards,
Nathan

SAP NW Solution Manager 4.0 Administrator/J2EE_ADMIN password locked out

Guys,
I was successfully able to install SPA Solution Manager v4.0(ECC 6.0) JAVA+ABAP Stack.
Post Installation, I am tried to logon to the SolMan (User Management & SAP Netweaver Adminsitrator) through HTTP (IE) URL http://<localhost>:port
The homepage displays just fine. When try to authenticate to User Management & SAP Netweaver Adminsitrator using following commbinatioln, the authentication fails.
user = J2EE_ADMIN password = <ADMIN>
OR
user = user = J2EE_ADMIN password = <admin> (Not sure if the password is case sensitive)
Now, I looked at the alerts and found that J2EE_ADMIN user is locked.
Does anyone of you know how to unlock this id and what its password should be ?
Any alternative user id/password can be used to login ?
Should I have to install SAP GUI for Java or ABAP ?
Please help me login to solution manager.
Thanks for your help!!
Chris.

Hello,
as far as I know you can login with a sapgui to your installed system. If you did an standard installation, then the J2EE stack is bound the client 001. Therefore logon as DDIC or SAP* to the ABAP part with SAPGui and unlook the J2EE_ADMIN user.
You had tp specify the passwort of all users during the installation process of SOLMAN 4.0. If you did an standard installation, you only specified one password for all kind of users.
HTH
Frank

The J2EE_ADMIN is keep getting locked

Hello,
The J2EE_ADMIN is keep getting locked for some reason.
I unlock it and after a while it is locked again.
No one is trying to login with it so it can't be locked due to multiple wrong logins.
What can be the reason for that?

Hi,
Open Visual Administrator in Cluster> Server>Services-->Security Provider
Go to Runtime - tab and then User Management. Search for the user "J2EE_Admin" and double click on the user name to get the user management property sheet. There you can find "No password change required". If it is not checked, please check that one. Then that password wont expire for every deployment.
Hope this helps.
Regards,
Pooja.

HT201328 Hi there, I purchased an Iphone 4S, it is currently locked with one carrier, I am in a contract with another carrier. I am trying to unlock the phone, but the Carrier says I have to activate it through them to unlock it. I so not want to do that,

Hi there, my daughter purchased a used iPhone 4S from a local newspaper who has had it in the lost and found for nearly a year, and no one ever claimed it. It is locked with Telus, my daughter is a Virgin Mobile customer. Telus told me they will only unlock it if she activates it with them, she cannot do that as she is in a contract with Virgin. Is there anything I can do to get around this problem?

Only the carrier to which the iPhone is locked can unlock it. In
this case, you must work with Telus. If they have a pay as you go
plan, activate the iPhone on Telus that way and then after
you meet whatever requirements Telus has, stop using Telus
and move the iPhone to Virgin. Or sell the iPhone to someone
who can use it on Telus.
Telus is the only one who can unlock that iPhone.

Unlock j2ee_admin

Similar Messages

Maybe you are looking for