Unlock objects from transport requests

Hi Gurus
    I was doing the SAP_Basis support pack upgrade, in netweaver 7.1 and many of the objects seems to be locked in transport requests. as my understanding, i have two options only,
1. replease transport - but it can create issues to us, as that will automatically imported to the next system in teh landscape, so unwanted requests will move to QAs system
2. unlock objects from transport request.
       So i did the second option, but it had a message that it can create inconsistencies in the system, do u know what all the meassures we need to take, if we unlock objects from the transport requests. Is it required to delete the transport requests,
by mistake , if someone releases the that transport, whether it will release the old object or the new object.
Please suggest what would be the best recomended approch by SAP
Bijoy Babu

Hi Bijoy,
Its better to release the TR and then delete the same from the queue before it is imported into the following system. This will avoid any inconsistancy when the TR released after the SP application.
Regards,
Varadhu

Similar Messages

  • Release object from transport request

    HI
    I want to take off two objects from my transport request.
    How is it possible without releasing all the exisiting objects from the request.
    Regards,
    Tapish

    Hi Tapish,
    You can go in any of the following ways
    1)Goto SE01 and give your transport request number.
       goto your task and click on edit button. you will get the list of all objects in a table.
       click on the object that needs to be deleted and click on the delete button.
    2)Goto se03 and give your request number to unlock all the objects.
        click on the objects that need to be deleted and click on delete button on top.
        dont forget to lock the objects after deleting the required
    The second option will  work in your case i guess.
    Hope this helps..
    Cheers,
    Srinath.

  • How to delete bulk of objects from transport request?

    Hi
    I made some mistake in selecting the objects for transport, and now there are a lot of unwanted objects saved under the request number. I know the objects can be deleted from the transport request through SE01, SE09 and SE10. But none of these allows me to delete the request number because there are a objects under the request that has to be deleted first.
    Is there any way by which i can delete the entire list of objects in one go rather than deleting them one by one?
    Thanx
    Sujai

    Hi,
    You have to Unlock the request before you deleting the request.
    Goto SE03->Under Requests/Tasks Double Click on Unlock Objects (Expert Tool)-> enter the Request no you want to Delete and Click on Execute -. Click on Unlock.Now you can Delete that Request.
    -Vijay

  • How to remotely control objects from transport request

    Hi all,
    I have to perform some task but can't find the way to get it done. What I have to do is:
    a) get list of transport requests for given SAP system (i.e. its import queue)
    b) let the user choose transport requests from the list
    c) get list of all objects from chosen transport requests
    d) control these objects in source and destination (from point a) ) SAP system. 
    Points a) to c) are easy and already done (using appropriate function modules and ALV objects). But I have no idea how to do things from point d). Control means comparison of dates (i.e. last modified) of objects in source and destination SAP system. The main goal of this approach is to avoid transportation of older objects from source system (DEV) and overwritting newer versions of the objects in destination system (PRD). I tried to use SAP versioning system to check versions remotely (the same way as it can be done from standard SAP transactions, e.g. SE38 for program source) with RFC and it worked fine (see function module SVRS_DISPLAY_REMOTE_DIR). But what about other objects not covered with versioning system? There are 932 objects that can be transported (at least TR_OBJECT_TABLE function module says so). Versions management system covers about 30 (program source, function module, object methods, table definitions, lock objects, and so on) of them. The problem is with the rest (900 transportable objects).
    How can I check their dates remotely in source and destination SAP system. Any clues? Manual retrieval of the information about dates of 900 various SAP elements must be very difficult (if possible at all) because so many objects must be spreaded out in many tables. Is there any universal or standard way (report, RFC function module) to get required information?
    Thanx in advance,
    Jacek Witczak

    Hi
    There is no automatic way to delete the unnecessary objects from the transport reqeust.
    1. Go to Tcode se09 and select the request which contains the unnecessary objects.
    2. Select the unnecessary objects and delete manually.
    Also if you want to delete the entire request then unlock the request in the tcode SE03 and then delete the request completely.
    Also note that if the request is released then you will not be able to delete the objects in that request.
    Hope it helps.
    Regards
    Sadeesh

  • Retrieve version of object from transport request

    hi,
    I deleted my report program from a modifiable workbench transport request.
    Now I want to retreive the version of program associated with this transport.
    Can I do that ?     (this version is not available in version mgmt of the report)
    thanks in advance
    B

    Since this is a continuation of your earlier post:
    retrieve the version of object
    Please assign poin ts to that one and mark it as closed. Then I will unlock this one.
    Other thread closed and this one re-opened.
    Rob
    Edited by: Rob Burbank on Mar 31, 2009 1:46 PM

  • How to copy object from transport request to another transport  request

    Hi All,
    Can some body tell me how to copy the objects which are there in on transprot request to another transprot request ? I think we can do this from the transction SE09 but I am not getting how to do this.
    Thanks&Regards
    Mahesh

    Hi,
    step 1.Go to se10, give your user id and clik display.
    step 2.There will be list of transport requests, go the respective request and point
               the cursor on the object under that request and click on delete button.
    step 3. Assign new request to the objects deleted.you can do this by activating all the objects once again.
    Regards,
    santhosh

  • Import only one object from transport request

    Hello,
          I have a transport request with some programs. I've not imported this request yet. And I would like to import only one program or just look at its source code. Is it possible with help of any standart SAP functionality?
    Thank you in advance,Sergey.

    Hi,
    Go to SE10 and display the transports for your username. Select the task number (not transport no.) and hit display object list icon. There you will see all the objects in the task. Hit change button and you will see delete icon enabled. You may select the objects you do not want to transport and delete it from the task.
    Version > 4.6C may have different screens but still the functionality is available
    Raj
    Reward points if helpful

  • Deleting objects in transport request

    Hello,
    I made the changes in InfoCube in developer system and included those changes in a transport request. I didn't release this transport. Then I realized that those changes must be reverted.
    I know what I have to do. First of all I need to change manually InfoCube and then remove objects from transport request.
    I have doubt about deleting objects. In transport request there is a lot of object which Iu2019ve never changed such as InfoObjects and InfoArea.
    Can I safely remove these objects? Why these objects are attached to my transport request?
    I checked them and last change was made by another user.
    Thank you for your time.

    Hi,
    I don't think there is any version comparison available with target system like R/3 reports. You will manually have to compare the properties.
    If you have lot of objects and do not want to loose any changes then you can even think of reverse transport from production system to development system for selected objects.
    Now about locking the remaining objects you can open the TR through SE09 in change mode and then select the required items and from the tool bar you can directly lock all the items in single go.
    Regards,
    Durgesh.

  • CMOD Project need to move from local Object into Transport request

    Hi Friends,
                 I created a Project(CMOD) under Local Object I need to move the Project from Local object into Transport request.
    I can't able to find any option.
    Please guide me ASAP.
    Advanced Thanks.

    On the first screen of your project, choose following menu path:
    "goto => object directory entry"
    press on the change icon
    you can now assign a different package.

  • How to unlock objects in Transport Organizer?

    I found a program to unreleased the objects. And create new TR so it wont affect the logs on the old TR#s. Do you think I'm doing the safe way?
    Now, I need to delete and create another object(fmod, fgroup or table) to save it in a new transport request. My problem is the object I deleted is locked in the old TR # so it saves on the same TR. How will I unlock this object?
    Actually, I made a program where I can modify TLOCK table that changes the TR# where it is locked. Is it also safe to forced change the TR?
    Thanks guys!

    Hi Maui,
    To unlock a transport use goto se03 --> Request Task --> Unlock Objects
    Eneter your request and select unlock and execute. this will unlock the request.
    Cheers
    VJ

  • How to unlock objects from a Released Task?

    Hi Group,
    I have a TR in which, there was a task added for my developments.
    Thing is, in the same TR one person has created a program and smartform objects and released the task.
    Now, I have to move these 2 objects into another TR.... I tried with various options like, tried to release the lock of the objects going thru the released task, Changing the package to Temp, Deleting the object from the released task and etc., but nothing is happening and a message is coming up(while Unlocking the objects - Request/Task XXXXXXXX already released(not modifiable).
    In summary, I want to release the locks(on the objects - under a Task that got released) and move these Unlocked objects into a separate new TR.
    Kindly let me know your inputs.
    Regards,
    Vishnu.

    Hello
    Though it may not be the right way, i generally follow this approach for similar case. I would change the status of the task (TRSTATUS) in debugging mode in table E070 from 'N' to 'D' and make the changes. It has so worked so far for me without any issues.
    Now the request will be modifiable and you can delete the objects from this request and move to a new one.
    But make sure you also delete the objects which will be transferred to the request from the task after you release the task in SE09/10.
    Regards
    Ranganath

  • Approve critical objects in transport requests (ChaRM)

    Hi folks!
    When trying to create transport of copies from within a Change Document (status 'to be tested') the system checks for critical objects in transport requests and prompts a warning that critical objects are to be approved.
    I do not want the Change Manager to approve every transport request containing critical objects. I would more likely use this feature as information for the Developer so he is aware of working on critical objects. The Developer should be able to make the approval.
    What I found out: only the user whos Business Partner is assigned to Partner Function 'Change Manager" is allowed to make the approval.
    More detailed it seems to be Partner Function of type "0008 responsible person"
    I tried changing Partner Function Developer from "0016 service group" to "0008 responsible person" but the system won't let me have two Partner Functions of that type in one Change Document.
    Any suggestions?
    Thanks in advance.
    /cheers

    Hi,
    For any user to approve the change req or change doc, he should have the authorization
    In your case Developer has to approve means
    1. Create a Action definition and maintain the processing parameters for the definition, select the partner fn as Developer
    2. Create the customized status in your status profile and its corresponding Authorization code also.
    3. Assign the Authorization code for Developer under teh authorization object B_USERSTAT
    By this Developer wil get the authorization for approving the change doc for the particular status
    If solves your query then mark the thread as answered
    regards
    Naveen

  • How to add Objects to transport request through FM/BAPI?

    Hi All,
    I am creating a workbench request through program. I am able to create it by using BAPI  but i am unable to add objects to it through program.
    Can anybody tell me the funcion module/bapi to add object to transport request?
    i have the list of objects that are suppose to be added.
    No BDC please.
    Thanks ,
    Swarup

    Hi Swarup,
    Check FM TRINT_MODIFY_COMM. Also look at program TH_TKANL for the usage of FM.
    Thanks
    Lakshman

  • Collecting objects in transport request

    HI Experts,
                    My development is completed and now i have to collect the objects in transport request. my development is like
    1) infoobjects(new infoobjects and some are available in BIP already and some infoobjects have reference infoobjects, dependent object is in production)
    2)Infopackeage for Datasource
    3)DSO
    4) Infocube
    5)multiprovider
    6)queries and views
    7)web templates
    This is the first time I am collecting this many objects. So please give  sugessions how to collect these objects in a single transport request.
    Thanks and Regards,
    RAJ

    It is advisable to collect the objects in separate transport requests...the transport request should contain dependent objects
    1) collect all the InfoObjects
    2) collect all the cubes/DSO   (they need Infoobjects.. so they are dependent on 1)
    3) collect datasources/Infosources  (they need Infoobjects.. so they are dependent on 1)
    4) collect transformation  (they need 2 and 3)
    5) collect DTPs and InfoPackages   (they need 3, 4)
    6) collect the reports
    7) collect the web templates
    make sure these are transported in sequence... each on dependent on previous

  • Business object for transport request creation

    Hi,
      I want to know the business object for transport request creation. Kindly help.
    Thanks and regards,
    Venkat.

    I am not sure but u can try this BO CTREQUEST.

Maybe you are looking for