Unlock One Employee

Hi,
I want to upload some data into Infotype through BDC , but the problem is that, if any employee number is locked, then BDC will not work, I want to unlock the employee number at the time of upload, how i can unlock the locked pernr's through my program.
Pls suggest.
Thanks in advance

Hi,
Anyway first upload all the Active Employees data.
Then you can make those PERNR's active in PA30 and again we can upload them seperately.
or if you want to correct them programatically we can say that
loop at ITAB.(this Itab should have that field STAT2)
if itab-stat2 <> '3'.
itab-stat2 = '3'.
endif.
modify ITAb index sy-tabix.
endloop.
Then do Upload .
Regards,
Anji

Similar Messages

Error is report generation for one employee

Dear SAP Experts,
Please provide immediate solution to this issue.
Blood Group details of one Employee is reflecting multiple times while generating report but only one record is maintained in master data.
What could be the possible reason for this error ?
please give some solution ASAP
Regards,
TD

Please, stop using words "immediate" and "ASAP" that is just rude behaviour.
You did not provide the information - which report are you running? What do you mean by 1 record in master data? Does that mean there is only one record in PA0028? If you look technically at the structure of the infotype, you will see that there can be multiply (in fact exactly 30) values / combinations maintained for one single record in the infotype.

Issue while creating Absence Quota for one employee

Hi Friends,
Our customer has a weird issue. When time evaluation is run, One Absence Quota type (Leave in Bank) is not getting generated for Only One Employee.
This leave type has been updated with quota in IT 2006 after running PT60 for all other employees in the PA. The issue is only with one employee.
This absence quota is assigned "Increase" in table V_556A_B (Permit Generation of Quotas in Time Evaluation)
Can any one please suggest how to generate the missing quota for this employee. Thank you !!

Hi
Thanks for your replies !!
Please find the screenshots attached.
Leave in Bank Absence type which is valid for 2014 is missing in IT 2006 instead This absence quota valid upto 31.12.9999 is present.
Current requirement is to remove the quota which is valid upto 31.12.9999 and replace the quota which is valid upto 31.12.2014.
I have checked for some PERNRs with same EG/ESG/PA/PSA combination. They have the absence quota valid upto 31.12.2014 Only.

Absences not deducted from Absence Quota for One Employee

Dear Friends,
I am facing an issue for one employee, when I recorded an Annual Leave absence to him, it is not updated in his Absence quotas infotype. But this is working fine for all other employees in the same employee group/subgroup grouping.
But for Sick Leave absence type, it is updating in his absence quota records...
I have checked the counting rules, deduction rules, base entitlement rules and other configuration settings.......It is fine and for other employees belonging to the same grouping, it is working fine, except this employee...
I couldn't understand what will be the reason? Can anyone shed light on this issue?
Thanks in advance,
Sai Narayana,
SAP Functional Consultant.

Hi JS,
I am checking the absence is deducted or not from his entitlement in the infotype 2006 after running the payroll for that month......
The employee has taken leave on last month and the payroll is also run for that month.......This Absence is not deducted from his quota......
I have checked for another employee in this department, no error/issue with that employee.......Only with this employee I am facing problem.....
I found -
1. The Absence Quota balance which is present in Infotype 2006 is not the same which is displayed in Remuneration Statement ( leave balance is displayed in payslip for every employee)
2. Annual leave is not deducted from the employee's entitlement where as sick leave is deducted. I have checked the deduction rule too for this grouping, it is right.No issues in that.
3. Absence Quota generation also produced different results when run time evaluation thru PT60.....which is not according to the entitlement to this employee grouping that too for this employee only.
Or Friend, can you tell me some other option, to overcome this issue.....instead of repairing this all the time.......
Thanks,
Sai

Talent Search not showing name for one employee

Hi
I am facing issue in talent search, it is not showing employee name after search. This is happening only for one user, means surely it will be master data issue,application is working fine.
But now I want where to see that data maintained.
Please help with this if anyone knows about it.
-Yogesh

Hi Yogesh,
If it is only one employee that it isn't showing for then it could be authorizations. Some other suggestions are:
- Incorrect or no name for CP object
- Incorrect authorizations of user used for delta-indexing
My guess would to be to look at authorizations first.
Best regards,
Luke

Wrongly payroll run for one employee, who left company several month ago

Hi all,
There is one case.
One employee left company several months ago and his payroll data was also determined in the system. But the month payroll run included this guy not correctly. And also there are not any change found for his info type data with pc00_m16_uaud. But system shows the payroll administer, who run the payroll this month, changed his payroll master data in infotype 3.
Any suggestion about this case will be appreciated.
Julian

Hi Jullian
A Retro payroll runs if "Earl.pers. RA date" is changed in Infotype 3. This also changes if there is any master data change in any payroll related Infotype like 8, 14, 15 etc. Please check if any data has changed for the employee to cause Retro payroll run.
Thanks

Override Security Profile for one employee

Hi
I have one employee who works in 'Accounts Department' and the HR user of accounts department can see only the employees of Accounts Department based on the security profile. This is working fine. But theres a different requirement. Some employees are transferred to other departments for 3-6 months for different purposes. During this time also the HR user of accounts department needs to view this employees details due to HR policies and procedures. Can we achieve this? If yes, how?
- Gulzar

Q 1 - When Employee is transferred from Dept 1 to Dept 2 for 6 months, Should the HR for both Dept 1 and Dept 2 be able to see his details for 6 months?
Q 2 - After 6 months period, employee's organization is again updated to Dept 1, should again HRs of both Dept 1 and Dept 2 be able to see his details even after the 6 months period?
Q 3 - If answer for Q 2 is - "after 6 months period, only HR of Dept 1 should see his details" , how to identify Employee's home department? Will it be the Employee's Organization effective as of Employee's hire date?

Multiple Positions for One Employee (OrgChart Campaign)

I am trying to determine if the OrgChart campaign offering will meet the needs of my client. They have an interesting setup where they assign one employee to multiple positions (example: 50% to one position, 50% to another position, etc). I want to confirm that the OrgChart campaign offering will pick this up and reflect each position and its holder even if the holder is represented in another org unit attached to another position. I assume this is possible since it uses the O-S-P relationship search but since we have trouble with some of the standard SAP reports returning only one position I just wanted to check.
Thank you!

Hi there,
Before I start you may wish to use TVN OrgChart 2.1 which was recently released on Service Marketplace as it contains all the functionality of the Accelerated Campaign offering with a bit more functionality and some bug fixes from TVN2.0.
OrgChart's standard functionality in this area is to show a node (box) for each position. Where two or more people sit in the same position it shows a node for each of these employees.
In your scenario where a person sits in two positions within different orgunits, OrgChart will represent this as two nodes - one in each orgunit.
I hope that helps!
Luke

ESI is getting deducted though the salary is high for one employee

Hi Experts,
I have one employee for whom the ESI is getting deducted in january salary. though the salary is 16000 for this employee.
what could be the reason? and hoiw to solve this error?
Thanks and Regards
Jaydeep Jadhav
SAP HR Consultant

HI,
As mentioned by our friends you can also note the below point
ESIC is calculated based on the monthly master components except for reimbursement pay elements ( Medical, Fuel) are included in ESIC eligibility but for calculating purpose it will also include reimbursements components.
For eg: If an employee is having salary of Rs. 16000/- including monthly reimbursements of Rs. 2000/- In this case he is under ESIC bracket (16000-2000=14000) but ESIC deduction will be done on Rs. 16000/-.
So you need to check each pay element for ESIC.

Multiple Currency Payroll Payments for one Employee

Hello,
We have a requirement of paying one employee in multiple currencies (i.e in Local currency and USD). This means that such employee has two bank accounts, i.e. Local Currency Account and USD Account.
The costing of payroll costs is done in the local currency. Does anyone know any standard procedure for this?
P.S we are using Global Legislation
Regards,
Salman

Hi Salman,
Have you tried this from Element Define window. There is functionality for Input and Output currency.
Hope it could meet your requirement.
Thanks
AshokP

Income Tax not Calculated for one employee.

Hi experts,
we have updated our patch lvl upto 86. Budget Changes Note is applied already. Now the Problem is with one employee.
Out of 1000 employees for one employee /436, /446 and /450 generated correctly with correct figure. But /460 is not generated.
I can see in the log /451 is generated with the amount exactly as /450.
Why system is not generating /460?
Can anyone guide me?
Regards
Nasim

Well the reaults are surprising as cross financial arrear /616 is only 1385.96 and relief generated by this is 18776. Which is simply not possible. Even in FY 2010-2011 relief should not be generated as relief only comes when employee is end up paying more taxes than last year tax on arrears. Now since tax slabs are increased, relief will not be egenrated.
This issue you can check with OSS message.
IF you want to deactivate the Section 89 relief implementation switch S89SW constant as 0 in table V_T511K. It may also activated on employee level, then you need to check IT0588/ subtype 4. Before deactivating it check out the impact after deactivation in case of retro as i may increase/ decrease the past tax.
Please note that implementation level switch supposed to be activated/ deactivated only once in lifetime of SAP system.

Is It Possible To Create Different Personnel Number For One Employee

HI Experts,
My Client need to get Different Personnel number for one employee,i.e for Trainee one Personnel number need to generate and same person when moving from Trainee to Probation another new personnel number should generate and again when same person move from Probation to Permanent another new personnel number should generate.
1. How to generate 3 different Personnel number for One employee?
2. How these 3 Personnel number should get linked, if want to get report for this one employee?
Kindly help me.
Thanks,
Lavanya
Message was edited by: Sikindar A

Hi Lavanya,
Your requirement can be fulfilled but not recommended...
As you want to generate different position number at different stage of employment....
i.e Trainee to Probation to Permanent...
First go for Trainee Position Hiring .... and generate first Number Say 5000000
Then suppose employee complete training after 1 Yrs.. then again go PA 40 enter date as 01.01.2015 say... & execute... & give Ref. Personnel Number (5000000) & different position number... this time...
This will link up all the personnel date from previous hiring record... & as per your need you can modify it.... Finally one more number be generated....
Similarly,, you can do for Permanent employee...
Once training or Probation period gets completed you can lock/ separate that employee number
Report ...
You can get necessary details in IT0031...& with different Position numbers which you will using at different stage of hiring...
Hope this should sort your issue..
Regards,
Veeram

When attempting to view the date track history for one employee, errors out

Hi All
When I attempt to view the date track history for one employee, it gives errors.
To get the details, the navigation is :
1. Search for employee xxxxxx
2. click on Assignment button
3. click on Date Track History.
4. Receive error APP-DT-52554.
5. Click OK on error message
6. click on Full History button.
7. Receive error APP-PAY-06153
What could be the problem and how to solve this?
Regards
Rahman

Sounds as if there is an inconsistency with the date tracked records. Can you check the records through TOAD or SQL Plus?
Have alook at MetaLInk article 343070.1 which refers to the second error message.
Regards
Tim

Offcycle run and stopping the bank transfer for one employee

Hi,
Please help with a soultion....
Jan 25th 2011- OFFCYCLE RUN
Jan 26th 2011 u2013 OFFCYCLE RUN .Bank Transfer
Jan 26th 2011 u2013 Realised that no need to pay one additional bonus for one employee.
Stop payment for one employee .Amount (1000 $) in IT0267 dated on 25th Jan 2010.
How to correct the payroll / How to adjust this amount? (Client donu2019t want to DELETE PY CULSTER)
Pls note the following:-
1) If I am running a correction done with -1000 $ amount in IT0267 with a different date then system generate a /561 for the next run. (Feb payroll run).Then it will deduct from the actual salary.
2) If I am deleting IT267 and rerun the offcycle then correction is not happening.

Hi,
For correcting this problem, 2 ways are-
1. Delete 267 entry and during next regular run system will take care accordingly means system will adjust /411, /418, /460 and obviously the net payment.
2. Another way is to run off-cycle type 'B'. See note : 431473
Regds.
Suman

Transfer of messages in workflow from one employee to another

Hi,
There are around 2300 items lying in SAP workflow of an employee. We need to transfer all these items to workflow bucket of another employee. We have allreday made set up such that in future all items will go to desired employee's workflow.
However, as a one time set up, we need to transfer allready existing items in workflow of one employee to another. Can anyone guide me regarding this please.
Regards,
Santosh

Hi Santosh,
is it absolutely neccesarry to remove the workitems from the employees inbox? If that´s not so, try using substitution, e.g. make user2 a substitue of user1, user2 sees all the workitems and can work with them. (Transaction SO36 might help)
If you are sure that you cannot use this way, take a look at fm SWW_WI_AGENTS_CHANGE.
Hth
Ute

Unlock One Employee

Similar Messages

Maybe you are looking for