Unlocked Transaction still showing the same status "Locked by SM01"

Hello Friends,
I am facing one silly problem ,but it is considerable.
I locked the transaction iw20 , then after some time i Unlocked that transaction.
but, When i m executing this iw20 transaction in same server, it is giving the status "Transaction iw20 is locked by SM01 transaction" (something like that) , and the transaction is not executing.
Though , i Unlocked the same transaction using SM01 on that server, its executing the unexpected behavior.
Wht's going wrong with this ?
Thanks in Advance.

The Transaction iw20 depends on the SAPMSNUM program. I am thinking that this program is giving the problem, as the same transaction FBN1 and other dependent transactions (which also depend on the same SAPMSNUM program) give the same unexpected response.
(Transaction * is locked by SM01)
I have the doubt on S_NUMBER  Authorization Object...which stays common for the related transactions....may be..
what u say...?
Still the problem remains same...

Similar Messages

  • HT1338 i have downloaded the new updates and restart the computor. The software updates still show the same software to be updated. I could not update itune 11.0.1 version

    HI,
    I have issue in updating software for my Macbook Pro and it kept showing the same software to be updated. I have restart the computer after install the software and still showing the same issue. In addition, i could not update the new itune version and every website i goes to it will show a msg indicating that the website is might not be the real website and would ask me to choose; show certificate, cancel or continue. This applies to the apple website as well.
    Pls help and advice.

    What version of OS X are you running?
    What updates are you downloading and from where?

  • HT4528 About 30 minutes ago, my iphone 4 screen just went white. It still shows the time, signal and battery at the top, but everything else is white. I can't receive calls/text messages. My phone will not lock or turnoff,  but it will charge. HELP!!

    I don't know what to do. My iPhone 4 just all of a sudden had a blank white screen. It still shows the bar at the top with the signal, time, and battery life. But the rest of the screen is white. If I touch the screen it acts like it's selecting something and gives me the choice to "Copy". It will still charge when I plug it up, but i cannot turn it off or lock the screen. I tried leaving it alone for awhile to see if it will lock on its own, like it normally would, and all it does is dim the screen. I guess im going to try to just let it die, and then see what happens, but if anyone else has any suggestions (other than taking it in to be looked at or getting a new phone) I would greatly appreciate it!

    Any number of things could have caused the phone to do this. If after the reset you are experiencing additional problems, the next step in the troubleshooting process is a restore from a backup. Make sure you have one before you start the restore process. If that does not improve things, then you may have to restore as a new device. Remember, restoring as a new device will delete all data off the phone. Make sure all of your pictures are imported to the computer and all other data is synced to supported applications on the computer before restoring as new. See this support document about backups http://support.apple.com/kb/HT4946, and this about restoring the phone. http://support.apple.com/kb/HT1414

  • When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • When I click on my Yahoo bookmarks, I only get the download Yahoo toolbar page, I downloaded the toolbar again and I still get the same page when I hit bookmark icon - how do I get my bookmarks back - they still show on Microsoft Explorer

    Question
    When I click on my Yahoo bookmarks, I only get the download Yahoo toolbar page, I downloaded the toolbar again and I still get the same page when I hit bookmark icon - how do I get my bookmarks back - they still show on Microsoft Explorer

    julianscars wrote:
    I don't get a page, all I get is the player popping
    Click the green jelly button at the top left of the player.

  • SCCM 2012 Client was removed but SCCM console still showing the status as "Yes"

    Hi,
    In a VM, SCCM 2012 client agent was removed and the VM was reverted back to a clean machine. SCCM console still shows the status as "Yes" even after the client agent was removed. Heartbeat Discovery is set to run every 1 hour.
    Please guide on this.
    Regards, Lorin Davis

    It's kind like a person dying (sorry to be a bit morbid) -- how does the phone company know the person died? The dead person certainly can't tell them and the phone company doesn't query every person it services and ask them "are you alive?"
    Thus, someone else must notify them of the person's passing. This is no different than a client agent "dying" in ConfigMgr. A ConfigMgr site never initiates communication with clients and thus something else needs to tell the site that the client
    agent is dead. You! Or, an automated process (as Torsten mentioned) that goes through automatically marks a client as "dead" that hasn't been heard from in x number of days.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • HT201274 i have ipod 2nd generation and i had reset   Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am co

    i have ipod 2nd generation 32 gb and i had reset >  Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!

    For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Itunes shows album in library but tells me I am not authorised to use it - I go through the whole id authorisation process and it still says the same, I purchased it three email addresses ago.

    Itunes shows an album in library but tells me I am not authorised to use it - I go through the whole id authorisation process and it still says the same, I purchased it three email addresses ago.

    What do you mean three email addresses ago? Do you mean that you've had three accounts in the store with three separate email addresses? Purchases must be authorized according the account details under which they were purchased. You can Get Info on the tracks and see the account name they were purchased with. Also...a missing shared folder can prevent authorization. See here: http://support.apple.com/kb/ts1277
    You might also have a look here: http://support.apple.com/kb/ts1389

  • HELP please! :) My ipod gets like lock, everything appear with lines, I already restore like three times the ipod and still happens the same, what can I do? and on some app store they just told me that restore, but well I do and is the same!

    My ipod gets like lock, everything appear with lines, I already restore like three times the ipod and still happens the same, what can I do? and on some app store they just told me that restore, but well I do and is the same! What can I do?? and is new, I buy it on march!
    This is a image of the ipod already restore, and everytime looks like that!

    If restoring the iPod to factory defaults/new iPod dow not solve the problem you likely have a hardware problem.  In that case either make an appointment at the Genius Bar of an Apple store or call AppleCare.  If defective, Apple will replace your iPod at no cost.

  • My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.  I have tried re-installation but still have the same problem.  Could you please forward a solution to this problem.

    My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
    I have tried re-installation but still have the same problem.
    Could you please forward a solution to this problem.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • How to unlock an itouch once the password is  locked out and it cannot be connected to the same computer to reset it?

    Does anyone know how to unlock an itouch once the password is locked out and it cannot be connected to the original iTunes computer to reset it?

    http://support.apple.com/kb/HT1808?viewlocale=en_US
    you will need to put the ipod into Recovery mode and then Restore as new to bypass the password

  • My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it.

    My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it.  My password doesn't work with the old email address.  When I look for my old email address in the Apple ID support area it says that the ID doesn't exist.  Help!!!

    You have to go to Settings>iCloud and tap Delete Account, then sign back in with your updated credentials.  This deletes the account and your synced data from your device, but not from iCloud.  Provided you are signing back into the same account and not changing to a different account, your data will be synced back to your device when you sign back in.

  • I can no longer burn a disc. The command to do so does not appear in my Files menu. All my recordings are 100% legal. I have installed a new version (it still looks the same), but that hasn't helped. I have done so before.

    All my music is from legal sources (albums owned by me, others from iTunes), but the Burn Disc command does not appear in the File menu, and nothing I do helps. I downloaded a new version of iTunes, but it still loks the same and may just be the same. But the problem started long before I did that.

    Meqmac wrote:
    This did nothing. Where do I click on the playlist? As far as I have experienced, the playlist is a list of songs with ticks against them on the left. I can use the control key, but where do I point my cursor to select the playlist?
    You don't even need to show the general Sidebar as suggested by others.
    Select Playlists in the top buttons:
    then control-click on the playlist you wish to burn in left column, e.g.:
    Regards.

  • Windows Firewall issue, Inbound rule opend all, still not the same as turning off

    This is Windows Firewall issue on Windows 8.1 Pro. 
    Backup Exec server cannot expand a computer node in selection list. I drill down to Microsoft Windows Network/Domain/Computers, then when I tried to expand a Windows 8.1 Pro computer node, it hangs out. 
    I narrowed this problem to Windows firewall related issue on Windows 8.1 Pro computer. 
    When I turn off Windows Firewall on Domain profile, Backup Exec Selection expands the computer node of the Windows 8.1 Pro computer. So, I created an inbound rule opening all to BAckup Exec server as following, but it's still not the same as turning off
    Windows firewall specifically on Windows 8.1 Pro computer;
    Any Local IP address, Any Remote IP address, Any port, Any protocol, All Interface, All Programs and Services, All profiles(Domain, Private, Public)
    And there are no rules blocking any which may override the above rule. 
    Ethernet on Windows 8.1 Pro computer shows profile is linked with Domain, but just to make it work, I selected all profiles.
    Even though I opened all available in inbound rule, it's still not the same as turning off windows firewall. Why am I missing? 

    It looks as something related to RPC(UDP 135), but even when inbound rule is all open, why it matters? RPC seems working fine only when firewall is turned off on domain profile. 
    Protocol 17 is UDP
    Port: 135
    ===============================
    Event ID 5152
    The Windows Filtering Platform has blocked a packet.
    Application Information:
    Process ID:
    0
    Application Name:
    Network Information:
    Direction:
    Outbound
    Source Address:
    192.168.1.120
    Source Port:
    0
    Destination Address:
    192.168.1.11
    Destination Port:
    0
    Protocol:
    1
    Filter Information:
    Filter Run-Time ID:
    245836
    Layer Name:
    ICMP Error
    Layer Run-Time ID:
    32
    The Windows Filtering Platform has blocked a packet.
    Application Information:
    Process ID:
    0
    Application Name:
    Network Information:
    Direction:
    Inbound
    Source Address:
    192.168.1.11
    Source Port:
    35341
    Destination Address:
    192.168.1.120
    Destination Port:
    135
    Protocol:
    17
    Filter Information:
    Filter Run-Time ID:
    245834
    Layer Name:
    Transport
    Layer Run-Time ID:
    13

  • With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?

    With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?
    I have developed a form with fields hidden by default, that become visible based on box ticked or radio button selections.
    My problem is that, when I close the form and re-open it, it comes back to it's default presentation, regardless of the information already recorded in the form (including in the now hidden fields.
    How to correct that
    Thanks in advance for any hint you can provide.

    I've had the same problem. This solved it...
    Go to the "Form properties..." in the File-menu. Select "Run-time" to the left and in the box "Scripting" Preserve scripting changes to form when saved: choose Automatically (Script-based state changes are saved locally in an insecure fashion. This option cannot be used for certified forms).
    Hope it works for you to...

Maybe you are looking for