Unlocking administrator password for hp pavilion dc7

Need help unlocking administrator password for hp pavilion the disabled key code is 51124125 please can anyone help me
This question was solved.
View Solution.

Steps to be followed:
1. Use the unlock code posted above to enter the BIOS
2. Disable all passwords that are enabled
3. If asked for current password - type the unlock code
4. For new password, just press ENTER key
5. Repeat the same for verify password column.
6. Then leave the BIOS by saving & exit option to save the changes.
Troubleshooting:
Incase if the Password doesn’t work please try a Hard Reset as follows.
1. Shut down the notebook
2. Unplug the AC Adapter and then remove the battery
3. Hold down the Power button for 30 seconds
4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook
5. If you now see a password box, Please type the same Password I shared before and press enter
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Similar Messages

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

I can't remember my administrator password for iMac

I can't remember my administrator password for my mac. Any suggestions?

http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/

RECOVERING FORGOTTON ADMINISTRATOR PASSWORD FOR MACBOOK PRO WITH OS MOUNTAIN LION REQUIRES (A) OPTICAL DISK READER or (B) ANOTHER COMPUTER. I HAVE NONE OF THE TWO. I HAVE BEEN ABLE TO LOGIN TO APPLE SUPPORT AND COMMUNITIES. NO SOLUTION IS AVAILABLE

RECOVERING FORGOTTON ADMINISTRATOR PASSWORD FOR MACBOOK PRO WITH OS MOUNTAIN LION REQUIRES (A) OPTICAL DISK READER or (B) ANOTHER COMPUTER. I HAVE NONE OF THE TWO. I HAVE BEEN ABLE TO LOGIN TO APPLE SUPPORT AND COMMUNITIES. NO SOLUTION IS AVAILABLE

Terribly sorry Joseph Kriz. I had absolutley no intention of annoying anyone. This was the first time I have been communicating in a discussion group, and as I wrote my comments I had no idea how my typing would reflect and where my question would be going. Hope my unintentional typing will be forgiven and causes no further agitation.The only additional comment I can make on your response is that "I do not use capital letters or CAPS LOCK while I try to enter my administrator password". Thank you for guiding me

Please Help, forgot administrator password for macbook pro 2011

Dear community,
I forgot my administrator password for my macbook pro from 2011
I didn´t came with any CD/DVD it's osx lion
And when I choose the reset using your apple ID icon, nothing happens
please advise

Reset Password
OS X 10.7 Lion /10.8 MountainLion
Follow the instructions in the first and the third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
http://support.apple.com/kb/TS1544

Lost Administrator password for Pavillion g series

Hello, i have forgotton the administrator password for my HP Pavillion g series notebook PC, i have the passwords for my other accounts. can you help me please?
Thankyou, Richard

Hi Richard,

Reset administrator password for CMS

I need to reset the Administrator password for a XI R2 CMS. I see this topic in help:
Symptom
How to reset the administrator user account password in BusinessObjects Enterprise XI3.1.
Resolution
   1. Take the back up of the CMS repository tables as a precaution.
   2. Open the Central Configuration Manager (CCM).
   3. Stop the Server Intelligence Agent (SIA).
   4. Run the following SQL statements on the CMS database:
   5. DELETE FROM cms_infoobjects6 WHERE (ObjectID=12);
      COMMIT;
   6. This will delete a record that belongs to the "Administrator" account.
   7. Restart #Server Intelligence Agent (SIA)# from the CCM. This will recreate the administrator account with a blank password.
   8. Now you can log on to the Central Management Console (CMC) using Administrator as a user name and a blank password.
However, I've seen some mention elsewhere that this might affect permissions for existing objects?
Is there any risk to existing data if I follow the procedure described above?

Steve,
    All the Administrators Preferences and added permissions will be also be reset. This will reset the Administrators access to default factory / install level.
SAP NOTE below for more details:
http://service.sap.com/sap/support/notes/1679970
Regards,
Ajay

Master code for administrator password or power on password for HP Pavilion m6

my HP Pavilion m6 you turn on just says administrator password or power on password
I have never set one is password is there a master reset code

Enter 75790504 REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

Default Administrator password for Windows XP PXIE-1062Q Controller

My PXIE controller was installed and setup with LabView (I assume) at NI. The OS is Windows XP, what is the Administrator password that was set during this process? ie how can I log in to the controller for the first time.
Thanks
Ian
Solved!
Go to Solution.

Try this:
http://www.mydigitallife.info/2006/11/25/easily-login-to-windows-xp-with-no-password-administrator-a...
Basically you press ctrl-alt-del twice when you get the login screen. Hopefully the administrator password hasn't actually been set, so you can just press ok or enter.
This is what I found on two used PXI systems that I bought at auction.
Because this is so simple I would strongly recommend setting an admin password as soon as you can.
Regards

Forgotten administrator password for imac how do I reset?

I have forgotten the password for teh administartor account on my imac. There are no other admin accounts set up.
How do I rest the password?

Welcome to Apple Support Communities
There are different ways of resetting your user password depending on the Mac OS X version you are running. Open  > About this Mac, and tell me which OS X version you are running.
If it's 10.6 or older, see "Resetting your original administrator account password" > http://support.apple.com/kb/HT1274
If it's 10.7 or 10.8, reset the password using your Apple ID as stated in the link above. If it doesn't work, try to reset the password using Terminal > http://discussions.apple.com/docs/DOC-4101

How can I find my user name password as I only remember the administrator password for the MacBook?

How can I find my user name password as I only remember my administrator password?I don't want to lose things or content.

If you have only one account, then your admin password is your user password. If you use another account that is not an admin account, then log into your admin account from which you can change the password on your user account.
Forgot Your Account Password
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

I have forgotten my administrator password for OS X 10.9.4. how can i reset it?

I can not recall my administrator password and I am unable to install a software I need. How can I reset it ?
OS X 10.9.4

Reset Password starting from Recovery HD
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Lost Administrator Password for Securedrive (SafeGuard PrivateDisk)

Hi,
I can't remember my administrator password and therefore cannot "mount" the SafeGuard PrivateDisk encrypted disk.
Is there anyway to reset an admin password for this drive?
If not can I just remove this software?

Hi Richard,

EliteBook 8470P Administration password for BIOS

Hi
I have a problem with my EliteBook 8470P labtop, I wanted to upgrade the BIOS from F40 to F46, I have downloaded the upgrade form HP website and tried to install it, the computer has restarted and asked me for an administration password, after that I could not access the BIOS setup, my computer is new and I did not set a password for the BIOS.
Please tell me what to do :-(

up

Need help with administrator password for first use??

Hi, I'm not sure if this is a dummy question. I just installed BI EE, then I was trying to open a sample Repository file, it asked me for password for Administrator account. I entered SADMIN as I found from the HELP (attached below), it didn't work; then I left it blank, it didn't work, then I tried any password I used during the installation, none of them worked.
Hopefully I can get some insight here.
Thank and have a good day.
Crystal
====================
About the Oracle BI Administrator Account
The Oracle BI Administrator account (user ID of Administrator) is a default user account in every Oracle BI repository. This is a permanent account. It cannot be deleted or modified other than to change the password and logging level. It is designed to perform all administrative tasks in a repository, such as importing physical schemas, creating business models, and creating users and groups.
NOTE: The Oracle BI Administrator account is not the same as the Windows NT and Windows 2000 Administrator account. The administrative privileges granted to this account function only within the Oracle BI Server environment.
When you create a new repository, the Oracle BI Administrator account is created automatically and has no password assigned to it. You should assign a password for the Oracle BI Administrator account as soon as you create the repository. The Oracle BI Administrator account created during the installation of the Oracle BI repository, that is, the repository shipped with Oracle BI, has the default password SADMIN.
The Oracle BI Administrator account belongs to the Administrators group by default and cannot be deleted from it. The person logged on using the Oracle BI Administrator user ID or any member of the Oracle BI Administrators group has permissions to change anything in the repository. Any query issued from the Oracle BI Administrator account has complete access to the data; no restrictions apply to any objects.

Goran O wrote:
Try Administrator/Administrator, it works for sh.rpd and samplesales.rpd.
Regards
Goran
http://108obiee.blogspot.com
Thank you too!!

Unlocking administrator password for hp pavilion dc7

Similar Messages

Maybe you are looking for