Unlocking contacts for BT connection to 2010 Lexus RX (Palm Centro Verizon)

Easy enough to pair the Centro to the Lexus (with Navigation), however, contacts will not transfer as they are locked on the Centro.  How can I unlock it and transfer my 900+ contacts?
Thanks,
Larry
NorCal
Post relates to: Centro (Verizon)

When you say they are locked, do you mean they are marked as private?
Unless you make the records private, they should transfer to the car kit.
On Page 197 of the user guide are the instructions regarding private records. See if the records are marked as private and if they are, make them visible and then try again.
Go to the learn tab on the support page for the user guide.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=centro&mn=centro&cn=verizon
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Have you verified that your Centro is compatible with your Lexus?
This is the car kit that states it is compatible;
Lexus (Denso)
Is your Lexus equipped with this car kit?

Similar Messages

  • Retail sources for new Palm Centro (Verizon?)

    I recently lost my Palm Centro (Verizon), and would like to replace it with another Palm Centro.  Unfortunately, it no longer seems to be avaiable from either Palm or Verizon.  Does anyone know of a retail (not eBay) source for the Palm Centro (Verizon) that is not excessive in price (i.e., over $100?).  I am hoping to locate a new one.  Thanks.

    You are looking for a discontinued model, so your sources are pretty much limited to after-market places such as eBay.  I doubt very much that you will find any new ones at any traditional retail outlets.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • What is the network unlock code for my HTC Thunderbolt?

    I want to unlock my husband and I's HTC Thunderbolts. Our contract is up and we bought our phones out right  before we signed a contract. What is the network unlock code for the HTC Thunderbolt phones? 

    Thanks. Apparently Verizon isn't really "sorry to see the customer go".  I'll simply buy an unlocked phone and be done with Verizon for good. Two years is to long to be treated like this by them.  I bought my phone and should be able to use it with whatever carrier I want. It is no longer Verizon's phone. Yes I understand they own some of the stuff they put on my phone but by all means they can remove it. I didn't want their crap on their in the first place. I wish the rest of America would quick kissing their rear.  End Rant
    >>Edited to remove profanity<<
    Message was edited by: Verizon Moderator

  • Need a method for importing Palm III data into a Palm Centro

    I just bought a Palm Centro (Verizon), with the expectation of importing data from my old Palm III.  From the Palm III Desktop, I exported Contacts, Calendar, Tasks, and Memos into separate folders (this was done on a Windows XP PC) and copied the resulting folders & files onto a flash drive.  But when I try to import these files into the Palm Centro desktop (on a new Mac Pro with OSX), the backup files are not in a "recognized format."  Does anyone have a process for reliably getting the Palm III data into the Palm Centro?  Also, is there an easy way to purge unwanted Contacts/Calendar events from the Palm Centro handheld?  With all the trial and error, its accumulating a lot of garbage.  Thanks...
    Post relates to: Centro (Verizon)

    Click on the following link for the upgrade guide on kb.palm.com
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=12926
    You will need to hard reset the Centro in order to clear out the Centro before sync'ing. Click on the following link for the hard reset procedure.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
    Click on the following link for the support page for your devices on the kb.palm.com webpage.
    http://www.palm.com/us/support/centro/centro_vzw/
    http://www.palm.com/us/support/palm3/
    There are links on the pages to the user guide, troubleshooting, how to's, downloads, etc.
    You could try to export the data in each category in Palm desktop, save to the flash drive and import the data.
    Click here for the data export procedure.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=36288
    Make sure you select "ALL" for the range during the export procedure. If you don't, it will only export the currently selected record.
    Post relates to: Palm i705

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • Using Hyper-V 2012 r2, connecting to the console results in: A certification authority could not be contacted for authentication.

    I'm having some trouble with authentication to guests from my Hyper-V console.
    If I try to connect from the Hyper-V Manager to the console of any guest, I get the error:
    "A certification authority could not be contacted for authentication. If you are using a Remote Desktop Gateway with a smart card, try connecting to the remote computer using a password. For assistance, contact your system administrator or technical support."
    I'm not using an RDG and smart card.
    I have 2 virtual networks. The first is Production, the second is Isolated. Production has 2 NICs attached to the Production LAN, the second has 2 NICs in our DMZ. The host is a member server of the production domain. I can use MSTSC from the LAN or the DMZ
    to gain access to each Guest and the Host.
    The issues start if I try "Connect" from Hyper-V Manager in an attempt to use the console of any Guest. Each attempt fails with the above error. If I use an incorrect password, I get a different error: "The credentials that were used to connect
    to {Server FQDN} did not work. Please enter new credentials."
    Taking a look at the the event logs, I can see the session successfully authenticating to the Guest (4776 Credential validation and 4624 Logon), and the fact I get a different error if I enter an incorrect password show I get some way along the line. However
    if I take a look at the logs on the Host, however I get:
    An account failed to log on.
        Subject:
            Security ID:        NULL SID
            Account Name:        -
            Account Domain:        -
            Logon ID:        0x0    
        Logon Type:            3
        Account For Which Logon Failed:
            Security ID:        NULL SID
            Account Name:        
            Account Domain:        
        Failure Information:
            Failure Reason:        An Error occured during Logon.
            Status:            0xC000006D
            Sub Status:        0xC000005E
        Process Information:
            Caller Process ID:    0x0
            Caller Process Name:    -
        Network Information:
            Workstation Name:    -
            Source Network Address:    -
            Source Port:        -
        Detailed Authentication Information:
            Logon Process:        Kerberos
            Authentication Package:    Kerberos
            Transited Services:    -
            Package Name (NTLM only):    -
            Key Length:        0
        This event is generated when a logon request fails. It is generated on the computer where access was attempted.
        The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
        The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
        The Process Information fields indicate which account and process on the system requested the logon.
        The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
        The authentication information fields provide detailed information about this specific logon request.
            - Transited services indicate which intermediate services have participated in this logon request.
            - Package name indicates which sub-protocol was used among the NTLM protocols.
            - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Which looks to me like a blank authentication request is being sent? (I've not deleted any machine/domain names, they're just not present)
    Any suggestions? Do you think I'm barking up the wrong tree?
    Thoughts and comments gratefully received

    Hi,
    What’s your guest system platform, base on my experience that must be the not supported guest system issue, the generation 2 vm only support the Windows 8 or 8.1 platform.
    The related KB:
    Generation 2 Virtual Machine Overview
    http://technet.microsoft.com/en-us/library/dn282285.aspx
    Hope this hleps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • First is it possible to connect my imac eaRLY 2009 as display for my macbook white 2010?

    first is it possible to connect my imac eaRLY 2009 as display for my macbook white 2010? If so what exact cables on the market do i need to purchase to make this work? Please help me out. I cannot afford to buy a new mac so temporarily this is my only solution.
    Thanks to all my Mac buddies for your assistance

    The Early2009 20" or 24" iMac don't have any video-in capabilities.
    Depending on your needs, you can investigate or tryout AirDisplay or ScreenRecycler which enable use of a Mac from another Mac or Windows PC through network/wireless connections.
    Stefan

  • IPad calling for iCloud backup but will not unlock so i can connect to wifi ... help

    iPad calling for iCloud backup but will not unlock so i can connect to wifi ... help

    thank you for replying:)
    but i tried all of the tips in the link and it still didn't work, does anyone else have any ideas?
    and just to add another issue, i went under General>About>WiFi Address and there is one and i still cannot access the internet.
    Message was edited by: kailey65

  • Droppoing connection and lock 'unlocks' preferences for internet

    Can anyone Help? I have a G4 with a speedtouch modem on broadband. It is wired connection. Occasionally the connection drops and I have to close down the computer and reboot.The lock is then off the Network Preferences. It is very annoying as I do not want to lose the page I am on. I have 10.4.6. The lock comes off the settings when this happens.
    Don't understand much computer 'jargon' so a simple answer would be appreciated......

    Tim - Do you have a suggestion to which type is best, at a reasonable cost? I am using Demon for Broadband connection.
    You pays yer money you take your choice.
    Consider this,
    how many network ports do you need? Do you need wireless? Do you need VOIP ports?
    You can get selection of cheap ADSL routers (£30 to £100) from http://www.solwise.co.uk
    I recently setup a few netgear DG834's and they have improved a lot since the last time I set one up.
    http://netgear.co.uk/extra/hwirelessrouterdg834g.php
    you can get those for about £65.

  • HT1386 having trouble syncing/downloading contacts & calendar & tasks from outlook 2010 to iphone4s help please.

    having trouble syncing/downloading contacts & calendar & tasks from outlook 2010 to iphone4s help please.

    I had the identical problem.  I still don't know how to sync the tasks, but here's how I did the contacts and calendar:
    1.  Connect the 4s to the computer.
    2.  Open iTunes.
    3.  Click the iPhone box in the upper right corner.
    4.  Click on the info tab.
    5.  Hit the checkbox Sync Contacts with... and choose Outlook from the dropdown box.
    6.  Ditto for Calendars.
    7.  Hit Apply.
    My problem was that originally, I wasn't getting the checkboxes.  I turned off the iCloud settings on the 4s.  That did the trick.

  • Unlock code for free blackberry torch 9800

    Hi,
    Recently in Dec 2010 I won the Blackberry Torch phone in the Fastest Thumb
    texting competition held at 1 court sq , in Long Island
    City NY. The Competition was sponsored by  RIM & AT&T.
    Phone came with no contract and no commitements.
    I want to give this phone to father as a gift(lives in other
    country) but I don't have a unlock code. Could someone
    tell me the best possible way to get it?
    AT&T gave me hard time and said they dont have the unlock code and asked me to contact RIM
    any input will be greatly appreciated.
    G

    Yea, they don't have to unlock it for you without a contract, and don't always do so anyway within the first 90 days of ownership even on a contract.
    So, get a very inexpensive unlock code from the link below, these are trustworthy and reputable unlocking vendors, you don't want to use just anyone, I've seen too many people get bad codes and permanently lock their device to the branded carrier.
    http://www.blackberryforums.com/unlock.php
    Good luck and congrats on winning the contest and the Torch.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Exporting contacts from webex connect?

    Does anyone know of a way to export contacts and groups from webex connect?
    I have way to connect with pidgin and get them into the pidgin contact file then put script together to make a CSV to import into IM&P for each user. I'm looking for a better way to do this with WebEx connect or the Cisco webex connect/jabber client directly if possible. On the Cisco webex connect admin web tool there is not a way to export contacts in mass either. I'm thinking of opening ticket with them to get a export of all users contacts hopefully.
    Sent from Cisco Technical Support iPhone App

    Replying to my own post... for the better of the communirty here. I reached out to WebEx and there is no way to export contacts from WebEx Connect and they don't have a way either currently. Left to third party clients and piecing your own solution (script) together currently and running it with each user manually.
    Would be nice if they would add Export/Import Contacts option to the Jabber client then when you imported contacts it pushed them to the server from client PC instead of an admin having to bulk import a bunch of user contacts.

  • Trying to connect Excel 2010 to Oracle

    Hello,
    I am trying to connect Excel 2010 directly to the Oracle database at work. I was hoping to combine VBA and SQL to automate queries without having to use SQL Developer or the bespoke enterprise software to then export the data into a spreadsheet. I have downloaded the ODBC driver and installed it onto my PC. I have tried to configure the connection and the tnsnames.ora file but it will not connect (I can get the exact error from work tomorrow).
    I have an XML file that contains all of the connection details (such as the ports, passwords and the server name) for the databases that I need to access. There isn’t anyone who can help me at work as the former IT manager has left and my current manager has very little technical knowledge.
    The network is managed by a different part of the business at an external site containing all of the servers. Although I have an administrator account, it is very restricted so I cannot use the command prompt but I can install software.
    I would be grateful for any advice. If it helps the operating system I am using is Windows Vista 32-Bit. I am unsure which version of Oracle we are using (it might be 10g but is there anything I could type into SQL Developer that would display the version of Oracle I am using?).
    Many thanks in advance and sorry for probably not explaining things very well,
    Matt

    I think I am going to give in with ODBC for the time being and I don’t want to waste any of your time.
    Just to make everything clear in case I missed something important out:
    I ran the select banner from v$version statement and retreived:
    Oracle Database 10g Release 10.2.0.5.0 - 64bit Production
    PL/SQL Release 10.2.0.5.0 - Production
    "CORE 10.2.0.5.0 Production"
    TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
    NLSRTL Version 10.2.0.5.0 - Production
    I originally installed the latest version of 11g ODBC and reinstalled it as I didn't think it was working. I then installed 10g version today but I couldn't find ODBC.exe file like I could in the 11g version.
    I can't get the tnsnames.ora file off the database server as I can't connect to it. I know the server name but I think I may be restricted from accessing it as the network and user accounts are really locked down. I read somewhere when I was searching that there was a way of generating the tnsnames.ora file which would be quite useful as there wouldn't be any mistakes.
    Like I have mentioned before I can’t access the command prompt and the only way I can connect to the database is through SQL Developer (which I have all the connections for in an XML file).
    I tried the ADO method and it didn't work, but after getting home and trying something I know how to resolve the ActiveX Objects related error I was getting, so maybe I could get this method to work.
    It is just frustrating that I know this could work but things aren’t as simple as I thought although the advice I have received has been really useful. Thanks for all the help.

  • Why won't Apple give out the unlock code for an iPhone 3Gs when the contract was honored and I am still an AT

    Why won't Apple give out the unlock code for an iPhone 3Gs when the 2  year contract was honored and I continued to be an AT&T customer with an iPhone 4. I wanted my old 3gs unlocked so my daughter could use it overseas when she is deployed. AT&T service over there *****, the international plan was not worth it. The individual SIM cards per country are much more reliable and cheaper. Teslestial in Iraq and Afghanistan, Telecom in Croatia,Vodafphone in Germany and Italy.  Why Apple will not unlock these phones for our military to utilize is incomprehensible to me.  These young men and women are fighting for these Apple people to go to work every day, safe, to live lives they have become accustom to yet releasing a phone to use on another network they can't do at least for the military.... WHY APPLE??  WHY?   A good excuse not some of the many lame excuses I have received on the phone many times. AT&T states it is Apple that will not allow them to unlock the phones...  Please tell me why?  All I want Is my daughter to have a phone I trust, to be able to call me when she is given the free time to do so and I trust the apple phone.
    Apple, please reconsider your stance on this issue.  I am having a hard time understanding why you will not unlock the iPhone. 
    A simple code could allow me to talk to my daughter while fighting for our country the Great USA.  Apple should be on the front line and enabling those fighting for our life, liberty and pursuit of happiness to use unlocked phones on reliable local GSM networks.
    I honestly hope that someone who has some sort of authority to begin allowing the release of unlock codes, and not forcing people to unlock their phones with some program produced by some hack just to be able to use your wonderful phone.  That is is in a nutshell, People love the iPhone so much that they want the ability to use it on the most reliable GSM carrier available to them.  That should be a major compliment. Even men and women on the front line want your phone. I agree, my service is not the best where I live either, love the GSM technology so stay with it, but if I had the ability to change to the other GSM network that has much better coverage in this area of the country I would change. To change now I would not have my iPhone and that I will not part with. 
    Apple, please reconsider opening up the lock code and allow your gem of a phone to be used by many more people in many more areas and most importantly overseas fighting for our country.  I know if this is really thought about Apple would understand and come to the conclusion to release the unlock codes, and stop the people from hacking in to use the iPhone on other networks.
    I would love for my daughter to be able to use my iPhone 3gs while fighting for our Free country.
    A response would be appreciated.
    Thank you.
    An Apple customer for 10 years, phones and computers.
    P

    Defiled:
    I did sign a two year contract and completed that contract. The 3gs is no longer in service. My daughter is going overseas to protect you and your family. I was attempting to find a way for her to have a reliable phone that could offer her some connection with home as she travels through the middle east.  She travels in missions all over.
    At&T unlocks other phones of theirs why not the iPhone?  AT&T says that Apple will not give them the code, it is not the carrier.  If I would have known this situation would have come up I would have bought and unlocked 3gs phone"Deggie" .  My main complaint is that Apple has not good excuse as to why they will not allow their phones to be unlocked from services well, AT&T .  I bought the phone full price, completed the contract terms, even went for and iPhone 4 with another2 year contract, along with owning an apple computer... I love the product.  My main issue is give me a good answer as to why you won't allow a phone to be unlocked. It doesn't hurt Apple, People still have to buy the phones from them, and use their App store and iTunes.
    Sorry, just upset about my daughter heading over there, boots on the ground, and just pray she will be safe. Would have liked to facetime her while she is in the airports and in specific areas allowed for that.
    Please don't come down on me for asking this question. I understand all the contracts etc.... but to single out the iPhone specifically to not unlock after contract is over does not seem fair.
    Thank you for your responses.

  • Who do I contact for support

    Yesterday I got the YVM4 error when trying to access the On Demand players i.e BBC iPlayer. Tried a soft reset by pressing the blue on/off button at the front for 8 secs but problem still persisted.
    I then turned power off/on via the switch at the back and problem gone!
    Today I found that On Demand and BT Vision were not available, got error saying not connected to network.
    Tried both the previous solutions and by turning power off/on at the back I got demand back and network showed connected.
    My broadband was functionning correctly on my PC so loss of network.
    The YouView Community forum has a number of posts about this, with some people getting the problem on a regular basis, and it is being reported that it may be due to the box losing the DNS setting. The following fix was suggested by YouView:
    Please go to Settings > Network & Internet > Network Connection Status. If the status is saying CONNECTED, please try the following steps: 
    Go to Settings > Network & Internet > Wired Connection. If the box is saying AUTOMATIC, switch it to MANUAL. Click Next. You will see three rows of numbers. Leave them as they are and click Next. You will see two rows of boxes, Primary and Secondary DNS. Leave the second row blank. Put a single '8' into the Primary DNS boxes so that it reads 8.8.8.8. Click Next and when it finishes finding your router, click Finish. 
    Turn off your router, and reset your box. Turn the box and then the router back on again. When it resumes, you should be able to access On Demand content.
    However there seemed to be some misgivings by users that this would actually make any difference.
    Having had both the problems mentioned earlier I started to wonder who I should contact for support if I get problems. Should it be BT Vision as they supplied the box, or should it be YouView as it's their service.
    Would appreciate some advice.
    Solved!
    Go to Solution.

    I have mine setup for static ip addressing, due to the number of devices I have on my network - so not had that issue as of yet.
    The reboot of router will flush the dns, so this is why it's recommended as if something had spammed dns cache it can cause numerous problems, so best to clear it out which is by rebooting the router - for pc's you can clear cache on the pc itself via command line - and on my pch-c200 i can clear the cache directly on that.
    In regards to support, if you got the product from BT then BT should officially be providing the support and no-one else, but there should be no reason why you can't go directly to youview or humax to get other questions you may have answered

Maybe you are looking for