Unlocking creative Live! Cam Network Pro

I just installed Li've cam network Pro and the the camera screen just shows a black sacreen with a padlock over stick figures.
I assume this is the parental control that was mentioned in the installation. Where do I go to put in the password to unlock it's

indigodanielle,
I presume that you have Win XP.Go to your Control Panel and then to Add/Remove programs, look for all the Creative applet and drivers that you could see from there pertaining to this webcam and remove it. Upon doing so, reinstall it back and see if it works then.
Good luck,

Similar Messages

Is Live Cam Optia Pro compatible with Mac OS X 10.5.6?

I recently bought a brand new live cam optia pro and it arrived today i plugged it in and tried opening photo booth, all i got was a black screen? And when i open image capture it doesn't detect the webcam? what do i do?

heh... reading too fast I overlooked the spec being touted. I don't think DVDSP 3 will work at all, sorry.
But yes, FCP v5 and DVDSP 4.0.2 were running on this very laptop just ten days ago. I updated to 10.5.6 and it all came to a halt, forcing me to apply the FCS 2 discs that have been sitting neatly in a box on the shelf above me for ages now.
I still have the old configuration in Time Machine - and have been building DVD projects using the older software as recently as last week.
Unless I am missing some other detail, of course

Creative live cam voice help please

Help please,
We are using the "live cam voice" model, with our computer (Vista 32bit), that appears to work OK, but after a few minutes we get the BSOD! We have tried un installing and re-installing drivers without any effect.Has anyone had this problem and if so how did you fix it.
Regards,
Arthur

Thanks for your response. I have tried 3 ports so far, all with the same outcome. One of my sons had it happen to him on another computer (XP SP2) using this webcam . As to programmes open at the same time, I am not computer literate and have no idea what programmes were running on each occasion.We use the webcam for Skype and apart from that I may also have IE open and perhaps Outlook Express. Over and above those CS4 sometimes.
If I cannot resolve this, can any one suggest another webcam please.
Regards,
Arthur

Creative Live Cam Video IM Pro & Kubuntu

Are there linux drivers available for this web cam? Sure would be nice to be able to use it on something other than Windoze. Or am I just SOL? Thanks,
Scott

I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

Creative web cam nx pro overrides my regular camera

I just installed the installation cd for webcam nx pro to use with msn messenger. Every thing works fine for that progam. When I plugged my digital camera into the usb port the pc-cam center software popped up on the computer rather than the automatic windows xp that normally comes up. Does anyone know how to have windows recognize my camera rather than pc-cam?

Hello,
I'm not sure if you have found the right driver already but if not, you might want to check out this thread.

Live Cam Notebook Pro VF0400 not working in IC(cube)

Hello,
Please help, i cannot use this cam to ic(cube).
It is the reason why i purchase this prooduct for ic(cube) use
with our client but it isn't working(ic(cube) does not recognize the cam).
But it is working fine in yahoo messenger and skype.
Any help will be much appreciated.
Thank you in advance.
myKing

Are you sure? Mine doesn't appear in that list or the Yahoo options menu, but it still works when I press the "Webcam" button in applications.

Live cam im pro

HiI need to install my cam upside down because I don't have enough place over my monitor. Is there a way to change the output of the cam, the way that the picture will be corrected to the good position?I didn't see nothing in settings that could resolve my problem. Any idea? Thanks,Pousi

Hi Lasalviaj,
Are you using the drivers that came with your installation cd?
Check the Support section for the latest driver updates.

How do I install my creative live cam onto Windows Vi

I have an old web camvf0050 that was made by creative. I still have the installation disk. But when I tried to install it on my new computer it doesn't work .Any suggestions.

Hi,
I am afraid there is no Vista driver development planned for this webcam.

Unable to get Live Cam Video IM pro to work with MS Messenger

I have installed Live Cam IM Pro and all software from CD, plus updates. It works if I try Cam Manager ... I see myself in preview window.Looking in Start - settings - control panel - scanners & camera there is only one entry, the Live Cam pro. I cannot get it to work with Windows Live Messenger .... if I initiate a video call, it rings but when far end answers ... I get video window with ... video loading message, but it fails and I just get a standard XP icon. If I go to Messenger .. tools ..audio & video the camera sparks into life and again I see myself in preview.But when I go to tools .. webcam settings I see the error message :Cannot change camera settings because your camera is not plugged in or you are using it in a video conversation or with another programIt is obviously plugged in, and there are no other programmes running. I have tried deinstall & reinstall ... no difference. I have removed CD extras .. so now just have Cam Manager & Video driver ... but still no joy.Anybody know how to fix this ?
Message Edited by Catherina-CL on 02-12-2007 08:39 AM

Bump, fixed the post.
Cat

Live cam voice & msn messenger

I bought creative live cam voice and I cannot get it to work with WINDOWS LIVE MESSENGER as it always crashes and gives the error message "the program has stopped working". Im using vista 64 bit and all the latest drivers.
I did get it working for a short while with MSN 7.5 but microsoft now prevent that version being used and when you try and install it windows insists on downloading live messenger instead.
Help please

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Live CAM Video IM Pro - Blue Screen (KS.SYS)

Just purchased Live CAM Video IM Pro first creative product.
My System: WinXP SP2, GB, Over 8 GB system space free.
Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
Result: The cam is useless.
Any help is greatly appreciated.

no one can help me? plz thx

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam

Microphone doesn't work for Creative Live! Cam Socialize HD AF HD Webcam (for Windows 7).
I have to use external microphone from Logitech now.
I send few emails to Customer Service. They answered once to check my Device Manager and disappeared after that. I'm really disappointed.
It looks like the drivers for Windows 7 are wrong.

hey Killthebeeping,
if you have the USB Mic connected kindly remove it first then uninstall the audio drivers for your B510.
let windows install its generic driver.
once done plugin your usb mic and test it again.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Live cam voice ......errr Help please

HI all,
I wish i never uninstalled my web cam....never had it working since.
I;ll put you all in the picture....Dell, Win XP Pro, SP3, and trying to install Live cam voice.....
Unfortuantely i think i have misalid !! the main CD it came with.
I have installed the drivers ( the most up to date ones 1.02.08.0710 ) and application package on the creative web site for XP.
The application seems to freeze, the web cam works, but when it tries to install the drivers, it halts for ages on the wdmaud.drv to c:\windows\system32.....is trying to install that driver section for over an hour now, if i disconnect the usb end ( which i will do now, it says its installed ok and finished ) but not not recognise the audio section. It shows up ok and fine on the video web cam, and also as i mention above the application seems to freeze adhock.
Advice given from ireland on the phone,
1) try tips from website ....like shut down anti virus and firewall etc ...done that no use !
2) uninstall, install the files from the CD
3) uninstall.... install from the web app and drivers ( which i have already done )
4) try from another PC...i have not got another PC!!!!!
Does anybody have any other tips...please help

Yeah, I hear ya! There is such a tremendous delay between sound and video that it looks like a bad kung-fu dub :womansad: I bought 5 of them for may office and they are horribly poorly synched. What's up?

[Solved]Webcam Creative Live not working

Hi,
I think there's a problem with one of the latest updates, my webcam was working fine since before
myself@Desktop ~]$ dmesg |tail
usb 2-2: USB disconnect, address 3
gspca: disconnect complete
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
gspca: probing 041e:4064
ov519: I2C synced in 0 attempt(s)
ov519: starting OV7xx0 configuration
ov519: Sensor is an OV7670
gspca: probe ok
gspca: probing 041e:4064
[myself@Desktop ~]$ spcaview
Spcaview version: 1.1.8 date: 25:12:2007 (C) [email protected]
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
ERROR opening V4L interface
: No such file or directory
[myself@Desktop ~]$ xawtv
This is xawtv-3.95, running on Linux/i686 (2.6.30-ARCH)
xinerama 0: 1280x1024+0+0
WARNING: No DGA direct video mode for this display.
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
no video grabber device available
My webcam is a Creative Live IM Vista. Also the sound recorded plays back faster than I recorded.
I've noticed that if I login as a root on KDE4 then xawtv will play fine,
su -c Skype
but skype will shows only green test's display and crash after a while.
F
Last edited by TheSaint (2009-10-05 17:07:55)

groups
disk lp wheel locate http games clamav dbus hal network video audio optical floppy storage scanner camera power users
I made an Arch installation on USB which isn't affected by this sort of problem. Unfortunately I'm not able to find the differences to trace the flaw.
EDIT
Partially solved:
Nvidia packages block the normal user access to /dev/video*
LAST EDIT
Found the issue, Must set a environ variable XLIB_SKIP_ARGB_VISUALS=1. Then I appended to /etc/profile.d/xorg.sh. Also mentioned in this thread
F
Last edited by TheSaint (2009-10-05 17:13:33)

I can not reactivate my DDNS service after having reinstalled my Creative Live Wireless Webcam

Hi,
After having changed my wireless router's network key, I had to change of course also the key
stored in my Creative Live Wireless Internet Camera setup. To do
this, I have deleted my cam definitions and did a scratch install after
resetting. However now I can not register my URL name anymore and DDNS is
disabled. The setup wizard says that it could not connect to the server to
register my host name (in fact this name is already registered by me before) and that I should try again. I attempted numerous times, no help!
The IP adress of my Creative Wireless Cam is 92.68..250, it is exactly the same as it
was before. My registered URL was "goztepe.creativeddns.com" and remote monitoring?was working?
with these parameters without any problem, which are still the same as before, I did not change them.
How should I reactivate my DDNS service? Maybe a reset or something alike is needed on the Creative Server which is doing the URL registrations? I would appreciate any help because I
am not able to access my cam from remote anymore!
Thanks in advance. Ozgur Ozdemir

Did you get an auto response to your e-mail? Once a request arrives a response goes out automatically. If you didn't get that, check your spam filter first as the reply may be stuck there.
If for some reason you did not receive any response at all, please send me a PM with your contact details. I will have someone look into your issue.
Message Edited by KokChoy-CL on 06-12-2008 09:09 AM

Unlocking creative Live! Cam Network Pro

Similar Messages

Maybe you are looking for