Unlocking operating system on Acer Aspire One Z65, AOA-1447 running XP Home Ed.
Hi, I have an Acer Aspire One Z65, AOA-1447, running Windows XP Home Edition. Is there a way (such as a key?) to unlock the operating system so I can download a different browser?
Thanks!
Hi Karatekidmonkey, Yes, the Netbook came with XP Home Edition pre-installed. Apparently there was a free trial period for using Internet Explorer that must have expired long ago (the Netbook hadn't been used in a long time until just recently. I tried to access the Internet on it to download a new browser but it won't go to the webpage needed. It just sort of freezes up. I'm trying to find a way to "open" the OS so it will allow me to access the Internet to download a free browser. Since XP is no longer supported, I don't think MS tech support would be able to help me with that. Any suggestions?
Similar Messages
-
I have an Acer Aspire One Netbook. It runs "Linpus Linux Lite" OS. It came with Forefox 2 installed. I have searched the web for advice on how to upgrade to Firefox 3.5.
I had a go at it, I have now lost Firefox 2, but failed to install a later version.
Can someone tell me how t0 get either Firefox 2 back, or better still, unstall Firefox 3.5?
I should say that I'm a novice so I need really basic instructions.
If this plea for help doesn't work, I'll take my netbook to my local PC chap & ask for Windows to be installed on it!
Thanks.See here:
http://linuxforums.org.uk/netbooks/install-firefox-5-on-an-acer-aspire-one-running-linpus-lite-linux/
for instructions on how to install Firefox 5 on an Acer Aspire One running Linpus Lite Linux. -
[HOWTO] Installing Arch Linux stable release on Acer Aspire One 522
[This is a work on progress and my first howto ever]
These steps will teach you how to install ArchLinux x64 stable release (currently 2010.05) on Acer Aspire One 522 from an existing ArchLinux (your desktop computer)
As you need a 2.6.37+ kernel to make networking work on the AO522, installing stable release as is won't work.
This Howto borns with the intention to address this problem.
You need to be familiarized with Linux internals to follow this howto.
(Expect this howto to become useless with new stable releases of ArchLinux.)
Remember to make a backup of your Windows 7 Starter system before installing ArchLinux.
I did a full raw copy of the harddisk by using systemrescuecd, an external harddisk and dd utility:
Just boot with systemrescuecd
Mount your external harddisk on /mnt/floppy for example
Clone harddisk with: dd if=/dev/sda |gzip -c > /mnt/floppy/ao522.img
This process took me a lot of time since my external harddisk is USB-1 (almost an entire evening)
Result image was about 22GB size
This image will restore partition table, boot sector and all data if things go wrong.
I followed some of the steps from this guide: https://wiki.archlinux.org/index.php/In … ting_Linux
If you have some Gentoo Linux experience you will find those steps really familiar.
You will need 2 USB pendrives or similar storage options.
One is needed to boot into your netbook, and the other to store our custom archlinux build.
Making an updated ArchLinux system
1) Make a local dir on your existing linux system
# mkdir ./newarch
2) Install pacman database on it
# pacman -Sy -r ./newarch
3) Install base system
# pacman -S base -r ./newarch
4) Let's chroot inside
# cp /etc/resolv.conf ./newarch/etc/
# cp /etc/pacman.d/mirrorlist ./newarch/etc/pacman.d
# mount -t proc proc ./newarch/proc
# mount -t sysfs sys ./newarch/sys
# mount -o bind /dev ./newarch/dev
# chroot ./newarch /bin/bash
5) Edit configuration files
# nano -w /etc/rc.conf
# nano -w /etc/hosts
# nano -w /etc/mkinitcpio.conf
Forget /etc/fstab for now since you don't know what partitions to use yet
6) Generate kernel image
# mkinitcpio -p kernel26
7) Generate locales
# nano -w /etc/locale.gen
# locale-gen
8) Make a tarball with our custom ArchLinux
# exit
# umount ./newarch/proc
# umount ./newarch/dev
# umount ./newarch/sys
# tar -cvpf newarch.tar ./newarch
9) Copy this tarball to an USB pendrive or external harddisk
10) Boot your netbook with a Linux bootable USB stick (I used systemrescuecd, and remember to pick the x64 bit kernel at grub screen)
You can use any linux distribution with usb bootable options. I suppose ArchLinux works too
To install SystemRescueCD on an USB stick follow this tutorial -> SystemRescueCD on usb stick
Insert the usb stick on your netbook, switch on, hit F2 to enter BIOS menu, and choose to boot from USB as first option. Save and Exit.
You should be booting into SystemRescueCD without any problem.
After initialization you will end in a root prompt.
11) Let's partition the disk
You will find 3 partitions if this is your first time:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 488397167 229312696 7 HPFS/NTFS/exFAT
My recomendation is to leave sda1 and sda2 intact, as they have the recovery information to restore Windows 7 Starter
You have plenty of space with sda3, about 230G.
So run fdisk/cfdisk and delete /dev/sda3
Now create a 100M partition for boot
Now create a Extended partition with all the space left
Now create a 1GB logical partition for swap
Now create a 10-15 GB logical partition for root system
And finally a logical partition for our home partition with all space left
Your partition table should look like this:
/dev/sda1 2048 29362175 14680064 27 Hidden NTFS WinRE
/dev/sda2 * 29362176 29566975 102400 7 HPFS/NTFS/exFAT
/dev/sda3 29566976 29771775 102400 83 Linux
/dev/sda4 29771776 488397167 229312696 5 Extended
/dev/sda5 29773824 31821823 1024000 83 Linux
/dev/sda6 31823872 63281151 15728640 83 Linux
/dev/sda7 63283200 488397167 212556984 83 Linux
12) Create filesystems
I choosed ext2 for boot, and reiserfs for root and home partitions.
# mke2fs /dev/sda3
# mkreiserfs /dev/sda6
# mkreiserfs /dev/sda7
# mkswap /dev/sda5
13) Mount partitions
# mkdir arch
# mount /dev/sda6 arch
# mkdir arch/boot
# mount /dev/sda3 arch/boot
# mkdir arch/home
# mount /dev/sda7 arch/home
14) Copy our custom ArchLinux build on it
# mount /dev/sdb1 /mnt/floppy (for example)
# cd arch
# tar -xvpf /mnt/flopy/newarch.tar
15) Configure /etc/fstab
Mine is as follows:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda3 /boot ext2 defaults 0 1
/dev/sda6 / reiserfs defaults 0 1
/dev/sda7 /home reiserfs defaults 0 1
/dev/sda5 swap swap defaults 0 0
16) Chroot in your new system
# mount -t proc proc ./proc
# mount -t sysfs sys ./sys
# mount -o bind /dev ./dev
# chroot ./ /bin/bash
17) Install grub
# grub-install
Edit /boot/grub/menu.lst to suit your needs
Mine looks like this:
timeout 5
default 0
color light-blue/black light-cyan/blue
title Arch Linux
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26.img
title Arch Linux Fallback
root (hd0,2)
kernel /vmlinuz26 root=/dev/sda6 ro
initrd /kernel26-fallback.img
title Windows 7 Recovery
rootnoverify (hd0,0)
makeactive
chainloader +1
As you see, you can restore Windows 7 Starter from Grub.
18) Change root password
# passwd
19) Add a regular user account
# useradd -G video,audio,users -m username
# passwd username
20) You're done!
# exit
# cd ..
# umount ./arch/proc
# umount ./arch/dev
# umount ./arch/sys
# umount ./arch/boot
# umount ./arch/
# reboot
Remove the usb stick from your netbook.
If all went ok, you will be inside your new stable and updated ArchLinux system
Next post is reserved for software configurations specific to the Acer Aspire One 522
Last edited by tigrezno (2011-04-20 12:22:38)Using acpid to achieve the following:
- Change screen brightness when operating in battery mode
- Power off when the power button is pressed
- Suspend when the lid is down
- Reduce CPU frequency speed to maximize battery usage
Remember that system suspend is only supported by ati free driver xf86-video-ati
1) Install acpid daemon and cpufrequtils
# pacman -S apcid cpufrequtils
2) edit acpid handler script
# nano -w /etc/acpi/handler.sh
Change the following section:
ac_adapter)
case "$2" in
AC)
case "$4" in
00000000)
echo -n $minspeed >$setspeed
#/etc/laptop-mode/laptop-mode start
00000001)
echo -n $maxspeed >$setspeed
#/etc/laptop-mode/laptop-mode stop
esac
*) logger "ACPI action undefined: $2" ;;
esac
for:
ac_adapter)
case "$2" in
ACAD)
case "$4" in
00000000)
echo 3 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 800Mhz
cpufreq-set -c 1 -f 800Mhz
00000001)
echo 9 > /sys/devices/virtual/backlight/acpi_video0/brightness
cpufreq-set -c 0 -f 1000Mhz
cpufreq-set -c 1 -f 1000Mhz
esac
*) logger "ACPI action undefined: $2" ;;
esac
Make sure you changed AC) for ACAD)
Now change this other section:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) logger "PowerButton pressed: $2" ;;
*) logger "ACPI action undefined: $2" ;;
esac
with:
button/power)
#echo "PowerButton pressed!">/dev/tty5
case "$2" in
PWRF) poweroff ;;
*) logger "ACPI action undefined: $2" ;;
esac
Change:
button/lid)
#echo "LID switched!">/dev/tty5
logger "ACPI group/action undefined: $1 / $2"
for:
button/lid)
pm-suspend && /etc/rc.d/network restart
logger "ACPI group/action undefined: $1 / $2"
Network restart is used because wlan0 will disconnect from AP after some time. You can try using iwconfig wlan0 essid <ap> key <key> instead of the network script, but haven't tested it myself.
3) Start acpid and load modules
# modprobe powernow-k8
# /etc/rc.d/acpid start
Add "acpid" to DAEMONS in /etc/rc.conf to start on boot
Add "powernow-k8" to the modules sections on /etc/rc.conf to load at boot
Stopping system freezes due to ethernet driver
The only way people have found to avoid freezes is by blacklisting atheros kernel drivers.
To do it at boot just edit /etc/rc.conf and change the MODULES line as this:
MODULES=(!ath9k !atl1c)
Reboot and you're done, but remember to not press the Wifi key, because it can freeze your system.
Correctly starting wireless at boot
I've found that standard scripts wont load properly my wireless lan. It gave an error telling you to use the WIRELESS_TIMEOUT variable and such.
To solve this, edit /etc/rc.d/network script and change the wi_up function by adding a second iwconfig command like this:
wi_up()
eval iwcfg="\$wlan_${1}"
[[ ! $iwcfg ]] && return 0
/usr/sbin/iwconfig $iwcfg
[[ $WIRELESS_TIMEOUT ]] || WIRELESS_TIMEOUT=2
sleep $WIRELESS_TIMEOUT
/usr/sbin/iwconfig $iwcfg
bssid=$(iwgetid $1 -ra)
It will do the trick and will start at boot correctly. This is not a solution but a fix.
Adjust Touchpad to disable false taps
What I did here is defining an area to be ignored. This area are 3 rectangles on top, left and right of the touchpad.
This means you can write and press space without having the cursor click out of the window and such.
# synclient AreaLeftEdge=150
# synclient AreaRightEdge=1300
# synclient AreaTopEdge=300
Also, add it to your /etc/X11/xorg.conf.d/10-evdev.conf:
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "AreaTopEdge" "300"
Option "AreaLeftEdge" "150"
Option "AreaRightEdge" "1300"
EndSection
You can play with those values. They just work for me.
Last edited by tigrezno (2011-04-23 13:49:48) -
Acer Aspire one will not boot up
When I boot up my Acer Aspire one I get a message that says:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "Repair your computer"
If you do not have this disc. contact your system administrator or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000e
Info: An error occurred while attempting to read the boot configuration data.
The only problem is that my net book has no disc drive. What am I to do??From ABOUT:
Start
System Recovery Options.
There are several ways of starting System Recovery Options. See How To Access the System Recovery Options Menu in the link above for help.
Open Command Prompt from the System Recovery Options menu.
Note: The
Command Prompt available from the System Recovery Options menu is very similar to the one you may be familiar with within Windows. Also, the following procedure should work as described in both Windows 7 and Windows Vista.
At the prompt, type the bootrec
command as shown below and then press Enter:
bootrec /rebuildbcd
The bootrec command will search for Windows installations not included in the Boot Configuration Data and then ask you if you'd like to add one or more to it.
You should see one of the following messages at the
command line.
Option 1
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 0
The operation completed successfully.
Option 2
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
If you see:
Option 1: Move on to Step 5. This result most likely means that Windows installation data in the BCD store exists but bootrec couldn't find any
additional installations of Windows on your computer to add to the BCD. That's fine, you'll just need to take a few extra steps to rebuild the BCD.
Option 2: Enter Y or Yes to the
Add installation to boot list? question, after which you should see a
The operation completed successfully message, followed by a blinking cursor at the prompt. Finish up with Step 10 toward the bottom of the page.
Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.
At the prompt, execute the bcdedit command as shown and then press Enter:
bcdedit /export c:\bcdbackup
The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a
file extension.
The command should return the following on screen:
The operation completed successfully.
meaning the BCD export worked as expected.
At this point, you need to adjust several
file attributes for the BCD store so you can manipulate it.
At the prompt, execute the attrib command exactly like this:
attrib c:\boot\bcd -h -r -s
What you just did with the attrib command was remove the
hidden, read-only, and
system attributes from the file
bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.
To rename the BCD store, execute the ren command as shown:
ren c:\boot\bcd bcd.old
Now that the BCD store is renamed, you should now be able to successfully rebuild it, as you tried to do in Step 3.
Note: You could delete the BCD file entirely since you're about to create a new one. However, renaming the existing BCD accomplishes the same thing since it's now unavailable to Windows, plus provides you yet another layer of backup, in
addition to the export you did in Step 5, if you decide to undo your actions.
Try rebuilding the BCD again by executing the following, followed by Enter:
bootrec /rebuildbcd
which should produce this in the Command Prompt window:
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes<Y>/No<N>/All<A>:
meaning that the BCD store rebuild is progressing as expected.
At the Add installation to boot list? question, type Enter Y or
Yes, followed by the Enter key.
You should see this on screen:
The operation completed successfully.
meaning that the BCD rebuild is complete.
Restart your computer.
Assuming that an issue with the BCD store was the only problem, Windows should start as expected.
If not, continue to troubleshoot whatever specific issue you're seeing that's preventing Windows from booting normally.
Important: Depending on how you started System Recovery Options, you may need to remove a disc or
flash drive before restarting. -
How to scan from my HP C 4680 printer to Acer Aspire one
I need to scan some papers from my HP C 4680 printer to my Acer Aspire one laptop. Is that possible?
Hi , Welcome to the HP Forums! I understand that you are wondering how to scan from your HP Photosmart c4680. I am happy to help! Scanning is different for each Operating System. If you do not know the Operating System you are using, please visit this website. Whatsmyos. Since you are using an Acer Aspire One, I am assuming you are using a version of Windows. Here are the how to guides, for each Windows version, that we have available: Scan from Windows XP With the Full Feature HP Software for HP Multifunction Printers.How to Scan: Windows Vista.How to Scan: Windows 7.How to Scan: Windows 8.Scan Using Full Feature HP Solution Center Software (Windows 10). I hope one of these guides helps you with your scanning! “Please click the Thumbs up icon below to thank me for responding.”
-
Webcam troubles Acer Aspire One
I have strange webcam behaviour on me Acer Aspire One A110
After netbook turn on, it works fine till closing netbook cover. After this skype, cheese, xawtv don't shows anything till reboot.
Right after turning on
dmesg
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
lsusb
Bus 001 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Closing and open netbook cover
Mar 20 09:05:05 greenhawk kernel: usb 1-5: USB disconnect, address 2
Mar 20 09:05:05 greenhawk kernel: usb 1-5: new high speed USB device using ehci_hcd and address 3
Mar 20 09:05:05 greenhawk kernel: usb 4-1: new full speed USB device using uhci_hcd and address 2
Mar 20 09:05:05 greenhawk kernel: usb 4-1: not running at top speed; connect to a high speed hub
Mar 20 09:05:06 greenhawk kernel: usb 4-1: configuration #1 chosen from 1 choice
Mar 20 09:05:06 greenhawk kernel: uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
Mar 20 09:05:06 greenhawk kernel: input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input11
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Note: bus and Device changed 1:2 to 4:2
And that's all - webcam not operational till reboot
cheese -v
Cheese 2.28.1
Probing devices with HAL...
Found device 064e:d101, getting capabilities...
Detected v4l2 device: Acer Crystal Eye webcam
Driver: uvcvideo, version: 256
Capabilities: 0x04000001
Probing supported video formats...
libv4l2: error turning on stream: Ошибка ввода/вывода (Input/Output Error on Russian)
Any advices to solve this?
PS: Sorry for ugly English, not my nativeAdditional information
I made two lsusb -s b:d -v dumps before and just after netbook cover closing. There are results:
diff ./acer_before.lsusb ./acer_after.lsusb
2c2
< Bus 001 Device 003: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
> Bus 004 Device 002: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
277c277
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x03ff 1x 1023 bytes
297c297
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x0200 1x 512 bytes
317c317
< wMaxPacketSize 0x1400 3x 1024 bytes
> wMaxPacketSize 0x0180 1x 384 bytes
As you can see, magicaly sizes of data packets was changed -
Acer ASPIRE ONE D257-13404 netbookA
I want to restore my acer ASPIRE ONE D257-13404 with the original factory software because it is running really slow. I do not have the required software, drivers, etc. so what do I need to do? Thanks, LawrenceA
Hello, 1- You can restore the system in using [ALT]+[F10].2- You can buy the erecovery media from your Acer store.
-
[SOLVED] Acer Aspire One - Wireless issue + Wpa_supplicant
Hi there!
I've been using arch on both my desktop and laptop for a while, with wpa_supplicant working perfectly for both of them (University 802.1x auth) I have a config file which works perfectly on the same wireless network with my laptop, but on the netbook I just can't seem to get on it. It's an Acer Aspire One - A150.
This computer uses as we know an atheros chip, which I just can't seem to get working. My laptop on the other hand uses an ipw2200 chip which works fine.
I've installed the madwifi modules, and when doing iwconfig i can see wlan0 listed. If i try to scan for wireless ap's with "iwlist wlan0 scan" it does not find anything.
Doing "wpa_supplicant -Dmadwifi -iwlan0 -c/..../wpa_supplicant.conf -dd " produces the following error
[henrik@scribble ~]$ sudo wpa_supplicant -Dmadwifi -iwlan0 -c/home/henrik/wpa_supplicant.conf -dd
Initializing interface 'wlan0' conf '/home/henrik/wpa_supplicant.conf' driver 'madwifi' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/home/henrik/wpa_supplicant.conf' -> '/home/henrik/wpa_supplicant.conf'
Reading configuration file '/home/henrik/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
eapol_version=1
ap_scan=1
fast_reauth=1
Line: 485 - start of a new network block
ssid - hexdump_ascii(len=7):
65 64 75 72 6f 61 6d eduroam
key_mgmt: 0x1
eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=21):
68 72 69 30 30 33 40 6d 61 69 6c 62 6f 78 2e 75 xXxXXX@xxxxxxx
69 74 2e 6e 6f xx.com
password - hexdump_ascii(len=8): [REMOVED]
phase2 - hexdump_ascii(len=13):
61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2
priority=10 (0xa)
Priority group 10
id=0 ssid='eduroam'
Initializing interface (2) 'wlan0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf
capabilities: key_mgmt 0xf enc 0xf
WEXT: Operstate: linkmode=1, operstate=5
ioctl[IEEE80211_IOCTL_SETPARAM]: Operation not supported
wpa_driver_madwifi_init: failed to set wpa_supplicant-based roaming
WEXT: Operstate: linkmode=0, operstate=6
Failed to initialize driver interface
Failed to add interface wlan0
Cancelling scan request
Cancelling authentication timeout
[henrik@scribble ~]$
I really hope some of you have a suggestion to what I can do to fix this, as it's really annoying only being able to use wired.
What I find wierd, is that "iwlist...scan" does not work.
Thanks in advance
-Henrik
Last edited by henrikken (2009-03-24 15:49:54)two things:
1. Your computer should be using the ath5k driver for the ar5007 chipset that your netbook has... and
2. If the opensource approach doesn't work for you, build this driver.
p.s. (wlan0 will be renamed to ath0)
#Contributor: KJoN <[email protected]>
pkgname=madwifi-hal
pkgver=0.10.5.6
pkgrel=svn
pkgdesc="Multiband Atheros Drivers - hal 0.10.5.6 - svn"
arch=('i686' 'x86_64')
url="http://svn.madwifi-project.org"
license=('GPL')
depends=('subversion')
provides=('madwifi' 'madwifi-utils')
source=()
md5sums=()
build() {
cd $startdir/src
svn co http://svn.madwifi-project.org/madwifi/branches/$pkgname-$pkgver
cd $pkgname-$pkgver
make
make DESTDIR=$startdir/pkg install
cp $startdir/pkg/usr/local/* $startdir/pkg/usr -vR
cp $startdir/pkg/usr/share/* $startdir/pkg/usr -vR
rm $startdir/pkg/usr/{local,share} -r
errr... remember to blacklist ath5k on MODULES on your rc.conf and please, run depmod -a after installing this package.
Luck with your issue -
Ubuntu 11.10 32 bit
Firefox 10.0.2 32 bit
Flash 11.1 r102
I have a Acer Aspire One netbook
As soon I hit "play" on a flash movie, flash player crashes
I have tried to disable hardware acceleration to eliminate that possibility, but the check box does not respond to input
I read that the flash player system controls do not respond when there are scrollbars around the screen (as there are on a small netbook screen) so I zoomed out to get rid of the scrollbars, but the systems setting menu is still unresponsive when I try to disable hardware accelerationThanks Carl, but as I mentioned:
>I have tried to disable hardware acceleration to eliminate that possibility, but the check box does not respond to input
eg. when I right slick on a player, the setting menu opens up, but the "Enable hardware" check box does not respond to a mouse click and remains on I also tried tabbing around the settings menu and using the return key to select/ de-select but that doesn't work either -
Can't boot Arch from USB on Acer Aspire One...
Hi All,
New to the forums, relatively new to Linux. I've tried several distros including #!, U/K/Xubuntu, Mint, Kuki, Puppy and Wolvix. However none of them, except maybe Mint, have played very nicely with my Acer Aspire One netbook. Even Kuki was a bit of a disaster, though I liked the Midori browser, first time I'd used it was under Kuki.
Intro aside, I want to try Arch. I am not scared of a bit of hands-on work via CLI, although am certainly no expert when it comes to CLI & Linux!
The problem is, I created a USB install for the latest 32bit version of Arch using Unetbootin (I tried both under Windows and Linux, creating USB live sticks with both). However when I try to boot from USB, all goes well until just after a message during the boot process appears. I forget off the top of my head what the error message says, though it appears after successfully waiting 30 seconds to discover a SCSI drive (or something along those lines).
The error has nothing to do with the drive, it's related to the step in the boot process that comes after that. Whatever the message is (I'm at work so cannot access logs or anything right now) it ends up asking me to resolve from a CLI prompt, which then leaves me with a prompt dialog, or to restart and try again.
Nothing seems to work so I am not sure what I am doing wrong or if it might be a bug with Unetbootin or a bug with the latest version of Arch? Or simply a good old fashioned ID10T error?
Any help would be greatly appreciated. Thanks!Thanks! I'll mark this as an ID10T error for now then. I'll give the USB install image a try tonight. On a side note, does Arch come with Skype pre-installed and if not, is it relatively simple to install a la the *.deb package install?
-
Firefox Slow Even When Offline on Acer Aspire One ao751h-1145
I have a 2gb RAM, 1.33 Ghz Intel Atom CPU Z520, and a fresh install of Windows 7 Ultimate on my Acer Aspire One ao751h-1145. I have no viruses and no programs running in the background. I've installed and uninstalled various versions of Firefox (4, 11, 12) and even upon a fresh install before I edit preferences, bookmarks, or add-ons, the PROGRAM ITSELF is super slow. It isn't using any more RAM or processer speed that it should, however. What it does: Menus are slow to open, scrolling is jumpy, and switching from tab to tab takes like 2 seconds. Internet Explorer 8 works just fine, as do all other programs on the computer. Also, it works fine in Safe Mode. I can't find anything regarding this issue online. Help!
Thanks for reply. But, drivers are up to date. However, I found on this page (https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers) that I might want to disable hardware acceleration. I did that through the options menu and Firefox is "usable," but still not what I'm used to on other computers and still not as fast as IE on the same computer. Since turning of the hardware acceleration helped, what else can I do along the same lines to speed it up more? I know a 1.33GHz processor is plenty fast enough to run only firefox by itself. The computer I'm on now (my non-netbook) runs at 700MHz when on batteries and has no performance issues. I hope I can get it because I don't want to use another browser! :(
-
[SOLVED] Questions on Acer Aspire One netbook resolution
I've been digging through the wiki and googling everything, but I just can't figure out how to get the dang resolution right!
I've got an Acer Aspire One (D257, model ZE6) and technically, it should be 1024 x 600. Everything seems like it's the right size, but it's just slightly blurry and looking at it makes me a bit dizzy, like it's just slightly off. I've read that the Acer netbooks are SIZED to 1024x600 but use the RESOLUTION of 1024x768. Could anyone confirm this? Am I way off base?
The wiki suggests using xrandr to change the resolution, but I get the BADMATCH error. The solutions I googled mostly involve editing an xorg.conf, which doesn't exist. Trying to generate it myself always fails (xorg -configure, which always leads to "number of created screens does not match number of detected devices").
Maybe I've just missed something really obvious... But I can't seem to find it.
Last edited by DevPug (2013-07-27 17:41:41)WonderWoofy wrote:There is the kernel driver, which is the i915 module from the kernel, and then there is the Xorg driver, which is provided by the xf86-video-intel package. Do you have both?
OH MY GOD. I followed the wiki to a T, but when I double-checked, I didn't have i915 listed in the MODULES="" line. So I must have not saved it, in my hurry to get everything going. My desktop looked okay-ish, but my web browser was resizing text improperly, hence the 'dizzy' effect.
Thank you from the bottom of my heart for catching my silly oversight!
Gusar wrote:I wouldn't say "crappy display", I'd say you don't like the default anti-aliasing.
This is also true, though... My next task is to find better anti-aliasing that I can get along with. The default just isn't cutting it, now that I can see it clearly.
Last edited by DevPug (2013-07-27 17:57:58) -
KDE 4.4.0 crashes when logging in on Acer Aspire One
Hello,
I just made an ArchLinux fresh installation on my Acer Aspire One, A1-ZG5. This is my problem: when I log in to KDE, the splash screen comes and then screen freezes. There is one gray window in the top of the screen that just flashes, no windows nor plasma can be seen. I have installed other KDE distros in the same netbook and worked well. I had had the same problem once, when I installed KDE 4.3.1, and never could fix it... KDE seems to be working like in the background; config files are still being created with the frozen screen...any ideas?...Thanks for your help!...:rolleyes:is your disk full?
if not, try to switch off the services, remone network-manager plasmoids, and try again -
Not starting - for Android - as supplied with Acer Aspire One D255
''locking as a duplicate - https://support.mozilla.com/en-US/questions/886204''
Download'''bold text''' Not starting - for Android - as supplied with Acer Aspire One D255Many thanks for a reply. It's good to get some feedback at least. I must admit I won't be too concerned if it's not compatible as I've since migrated to more useful tablet devices. This thing was always a bit of a mistake, especially with the annoyingly useless android bolt on. But as I use it for the occasional larger screen benefit and printer link, it would be good to have the benefit of latest MS. It still raises the question of why Acer at least can't provide a definitive list. After all there must be many other idiots like me that bought one? Thanks again
[subject line edited to reflect new topic] -
Wireless with acer aspire one linux linpus
hi everyone, have just had replacement hh3 which is connecting ok wireless to my laptop, but my wife has little acer aspire one which used to connect ok but now wont, it does pick up the fon sometimes but i would like it how it was and connecting directly to the hub. it does connect ok using a cable but not wireless. any help or suggestions please.
Solved!
Go to Solution.I would expect if you deleted all the existing wifi connections and then reboot. look for wireless connections available then select your ssid then connect - it will ask for key/password then enter then connect. it would normally save infor but I am not a linux user - works in windows
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Maybe you are looking for
-
I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says
-
IMac won't go past apple screen, keyboard won't connect
I cannot get my iMac to boot up past the apple screen with the loading circle. I would try booting up while holding the command and R keys or those other options, but my computer stopped working the one time my keyboard died and I had to change the b
-
Flash with CS3 - Mac - Importing Audio
Greetings, Creative Suite 3, OS-X (Possibly Leopard as well, it's dual-boot). We're working on our first few flash animations, nothing heavy or anything. Every time we try to import audio (MP3 or WAV), the computer tries for a while (shows the little
-
About oracle fusion middleware report arabic
i have oracle fusion middleware 11g r2 and when i run my report in pdf with arabic language the letter appear to be like rectangle although i made every thing to make it appear as report path in regedit and so on ... *( i do this step in application
-
How to get a remote server datetime in SQL Server
I have a stored procedure in DB Server 1, if i execute then i need to capture the datetime of DB Server 2 server 1 & server 2 GMT Time may differ