Unlocking restrictions after 7 failed log in attempts.
I had set restrictions on my son's ipod touch. He and a friend tried to guess the password and have locked up the restrictions section. It says to try again in 13,737,774 minutes. I restored the ipod however it still locked. How can I get the restrictions to unlock?
Yu have to restore the iPod to factory defaults/new iPod or wait 26 years.
Similar Messages
-
Spiceworks Inventory service account many failed log on attempts
I am having a problem with the inventory feature for spiceworks 7.3. We originally had version 6.2 hosted on our internal network (Which is not connected to the internet) and besides some random issues everything worked fine. We upgraded the client to 7.3 after some discussion. After we were still able to log in and see all of our information like before. We set a new password for the service account in spiceworks and in active directory. In 24 hours our auditing software showed that there were over 120,000 failed log on attempts from spiceworks and the account was locked out. After turning off many of the new features that check the network and setting up a new password it is still producing many failed log on attempts. Does anyone have a clue what could be causing this issue? And this network cannot connect to the internet to...
This topic first appeared in the Spiceworks Communityhttp://support.apple.com/kb/TS1643
LOL
Only 4 years. This issue has been there since iChat 2 and was first spotted with Zyxel routers/modems.
It has become more of an Issue when using Port Forwarding on devices that now offer Protocol selection on Port Forwarding (port 5190 on the TCP for Login and UDP fro File Sharing and pics in chats) as one port can not be forwarded to two devices (it seems to cross over to just port forwarding twice in these devices).
I have never known it happen on a Netgear.
It is not limited to specific devices. There is some speculation that the AIM servers get too busy on port 5190 with several dozen clients as well as iChat and AIM on a PC using the same port.
The AIM servers will in fact allow almost any port.
443 has been suggested here by the regular posters as port used by Mail and Web browsers fro secure connections and therefore open in Tiger and earlier Firewalls and most modems and routers because it is below the 1024 threshold where ports need to be specifically opened.
8:03 PM Friday; June 13, 2008 -
Hi,
We would like users to be emailed when no. of login attempts exceeds.Where & how to setup email? How to audit failed login attempt?
Regards .We would like users to be emailed when no. of login attempts exceeds.Please confirm which user are you taking about, is it db or apps user?
How to audit failed login attempt?For database
All About Security: User, Privilege, Role, SYSDBA, O/S Authentication, Audit, Encryption, OLS, Database Vault, Audit Vault [ID 207959.1] <<<<< 10) Auditing
for apps:-
How To Audit An Oracle Applications' User? [ID 395849.1]
Where & how to setup email? Shcedule a cron job or make a custom concurrent request to get a mail. For apps there are conc request that can inform you. Check note that has been mentioned above for apps.
Thanks,
JD -
I have an iPhone4, used and locked to the UK network. I need to pay for the phone to be officially unlocked.
In the meantime we used it as a device to check emails and games etc.. We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
any idea how to do this?
Please advicegencml wrote:
We put a pass lock and after many failed attempts we forgot what it is. Now the phone is Disabled and iTunes can not fix it since it can not update the Software without the phone being officially unlocked..
any idea how to do this?
Please advice
You need to visit Apple Store, and show ownership proof in case of forgotton pass code. -
Use an alternative e-mail address after repeated failed attempts to send.
My company uses a small e-mail server company that offers a lot of benefits, but occasionally goes down for a day or two. I would like to find a way to automatically use another e-mail address after several failed attempts to use this server.
Thus, if everything is working right, my e-mail will use the regular server. However, if the original server is down, when my e-mail fails to send repeatedly using that server, I would like it to default to another server. Is there a way to configure this?
Thank you.No, you can’t. .Mac’s SMTP server simply doesn’t allow sending from a non-.Mac address.
Doesn’t your ISP include some POP or IMAP mail accounts with access to an SMTP server as part of the service? Such an SMTP server might be less restrictive.
A Gmail account would allow you to use Gmail’s SMTP server. Instructions for setting up a Gmail account are provided here:
http://mail.google.com/support/bin/answer.py?answer=13275
After setting up the Gmail account in Mail and checking that it works, you can use Gmail's SMTP server to send from your other mail accounts as well:
1. Log into your Gmail account on the web.
2. Go to Settings > Accounts.
3. Enable the addresses you want to be able to send from, and let Gmail validate them by verifying that you do indeed own them.
4. For each mail account you want to send from using Gmail’s SMTP server, in Mail go to Preferences > Accounts, and choose Gmail’s SMTP server from the Outgoing Mail Server (SMTP) popup menu.
BTW, if you’re using Mac OS X 10.3 (Panther), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Mac OS X 10.3 & earlier forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance. -
Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??
Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)? -
My Itunes won't open after a failed attempt at upgrading.
My ITunes won't open after a failed attempt at upgrading. Keep getting the error message...Failed to start because MSVCR80.dll was not found. I have tried uninstalling and reinstalling and notheing works. Help!
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.
I can't, look at this image
-
ACS v5.1 - Can internal users be disabled after x failed attempts?
I have noticed under authentication settings for internal user accounts there is no setting to disable the account after x number of failed attempts (ACS v5.1). This is such a fundamental requirement for user accounts that I am wondering whether I have missed something. (They include this option on Administration accounts)
Does anyone know if can this be set somewhere else or is Cisco going to implement it in a later version?
Many ThanksHello jrabinow ,
Thanks a lot for the reply .
We already have our AD setup to lock account of users who failed 3 consecutive windows login attempts .
However when network administrators fail to login after 3 consecutive attempts into a network device, they can still login into a network device if they provide their correct AD credentials .
Is there any specific configuration that needs to be done on the AD to be aware of the failed login attempts on the network devices and count it the same as a failed windows login attempt ?!
Kind Regards ,
Moussa -
Option to wipe data after ten failed passcode attempts
Having just upgraded to the latest 2.1 software there is now the security setting to wipe data after ten failed passcode attempts - which I can't turn off as I am synching with work email. Can anyone confirm that this is 10 CONSECUTIVE attempts as 'fat finger syndrome' often means I take a couple of gos each time. Thanks!
A quick search of Apple Support yielded this:
"If you repeatedly enter the wrong passcode, iPhone or iPod touch will be disabled for longer intervals, before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect to the computer you normally sync with. Note that starting with iPhone 2.1 software, there is a setting to cause the device to erase itself after 10 consecutive incorrect password attempts. This setting is off by default. It can be turned on by tapping Settings > General > Passcode Lock after you enter a correct passcode."
http://support.apple.com/kb/HT1212
You can search Apple support for this as well. It is probably in the manual as well:
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf -
Can you still configure your device to erase itself after ten consecutive incorrect password attempts if you can't unlock the screen due to forgotten passcode?
No.
-
Data lost after 10 failed login attempts...Can the data be restored?
Hello...
Has anybody a solution to recover the data after 10 failed login attempts?
My son played with my Iphone...and the data is gone...
ThanksYes, I have already followed this article.
After changes in AD account, we need to follow this article.
But, here my concern is that after password change prompts, it keeps retrying again and again for new password. It will cross the threshold limit which is set as 10. But the account doesn't gets locked.
Thanks for the suggestion.
Regards -
I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?
If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.
-
wanted to log in to icloud after i trried for two attempts and i reset my password andnow is saying the maximum number of free accounts have been activated on this iphone
Welcome to the Apple Community.
Unfortunately once all the 3 iCloud accounts have been created on your device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another iOS device or Mac computer. -
I operate an Amway Business and use the switch share duplicate APP. Initial log in was successful but now it reads " Log in failed ( GW900751 ). This is constant upon log in attempts. Is there a way to rectify this?
Hi Tracy,
I don't suspect Malware yet, Id guess Disk corruption or failing Hard Drive with Files not found.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Maybe you are looking for
-
Typekit font not displaying in iPad DPS app (created by Indesign) in Web Content (Edge Animate)
I think I have tried every permutation to make this work, but I am probably missing something. I am creating a single DPS iPad app with InDesign, and I am using a Typekit font throughout. So far so good. I have created an Edge Animate project usin
-
Hi, I'm currently working on a GUI that I'd like to be in full screen, but I can't manage to remove the uppest bar of the window, with the title, and the resize and close buttons. I'm sorry if this is the wrong forum, but there are so many I didn't k
-
Hello all, I want to create a repository that reads the content of a remote file system. What should happen when a user located inside the network of the file system try to download a document from portal (using TREX as search engine)???? The documen
-
Viewer to features in Oracle Spatial
Hi, There are a packge java that allow display features storage into Oracle Spatial? Thanks. Gilmar.
-
Regarding Report Display Format
Dear all, In my report i have records in internal table like this : Line no. LAR01 LAR02 LAR03 LAR04 20 LNTP LSTP LNTP LTPS 40 LSTP PNTR PN26 P2C2. I want these records