Unmount failed for device
I want to erase my internal HD to perform a clean Lion install but i get the message that the drive cannot be unmounted? Why not.
I've booted from an external HD with a SuperDuper back up.
Got it: just a simple restart of the system on the external took away the 'can't unmount' message about the internal HD.
Similar Messages
-
ISE Alarm (WARNING): Dynamic Authorization Failed for Device
Hi all,
I am posting this discussion as previous posts that I have found in this forum have never been resolved or the resolution is not applicable to me.
I am using ISE 1.1.1.268 and WLC 7.2.111.3 and NAC agent version 4.9.1.6 on Windows 7 Client machines.
About once a day i get the error "ISE Alarm (WARNING): Dynamic Authorization Failed for Device".
The device it is reffering to is my NAD, a WLC 5508 running 7.2.111.3
I have looked at the logs and I cannot see anything in the logs which correcponds to this message so that I can troubleshoot further. Maybe I can if I am enabling the correct logging level on the correct ISE component.
Can someone suggest the components and the logging level that I should set to get some more detail about this error?
At the moment, I have only set debug logging on Active Directory. I have TRACE logging set on Posture, Runtime AAA & prrt-JNI.
I do not want to enable too much debug logs, so I was wondering whether anyone can help with a specific element that I should be debugging.
I thought debugging the posture element would be enough but when I look at the logs there is nothing there that relates to this message.
Can anyone help?
thanks
MarioFirstly, I wouldn't run a production deployment of ISE on 1.1.1.... 1.1.3 Patch 1 or 1.1.4 is the way to go.
Secondly, this error happen a lot, especially with Wireless, and it's not worth worrying about. I've had a couple of TAC cases opened for this and some similar errors, generally they're caused by a Client going to sleep, leaving the coverage area or otherwise leaving the WLC while ISE is trying to do something with it.
Only worry if you actually have a Client-impacting problem, which by the sounds of it, you don't. -
Config archive failed for devices no longer on DCR
RME reported 30 devices failed config archive but this devices are already removed from DCR but RME keep reporting this devices. how I can clean up thiese devices from RME?
ThanksYou can contact TAC, and they can give you the procedure to surgically remove these device records from the RME database.
-
I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages -
Hi everyone,
I'm trying to deploy a Windows Embedded Standard 7 (trial key at the moment) image in SCCM 2012 SP1 with a very simple task sequence.
I have a 'build and capture' and an OSD TS. I'm testing these on Hyper-V PCs and both work fine when i create stand alone media. The problem arrises when I try to deploy (or build & capture) with a bootable media;
The TS starts, formats the disk, applies the OS, Windows and network settings, Apply Device Drivers etc., but when it reboots into Windows
(or WES7 to be exact) it cant boot. The Windows Boot Manager reports a 0xc0000359 for storvsc.sys
And I can't figure out what's wrong. I will post the SMSTS log further down below. The SAME TS works fine when it's a stand alone media.
I have tried to:
- Apply the WIM manually (nothing wrong - boots fine)
- Create and apply driver package for the Hyper-V machines (from the MSI's Windows5.x-HyperVIntegrationServices-x86 and Windows5.x-HyperVIntegrationServices-x64)
- No dice
- Create a new boot image with the hyper-v drivers in it. No dice
- Google everything related I can think of.
I suspect it has something to do with the lines where it says:
"Failed to find a suitable device driver for device xxx”
It also has a couple of 401 errors when trying to get the packages, but it seems like it DOES end up getting the content.
Please help! What could it be?
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
SMSTS log key points are (the log is too long to post here):
401 - Authentication failure on request with anonymous access, retrying with context credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/s3cap.inf to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\s3cap.inf
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vmbusvideo.cat to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vmbusvideo.cat
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vms3cap.sys to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vms3cap.sys
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Download done setting progress bar to 100
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) VerifyContentHash: Hash algorithm is 32780
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Installing driver "Microsoft Emulated S3 Device Cap"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Adding "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to Windows driver store.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting %SystemRoot% to "C:\WINDOWS"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "amd64"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Added list item with key value '1'
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Calling Package manager to add drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Command line for extension .exe is "%1" %*
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Set command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Executing command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Process completed with exit code 0
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Dism successfully added drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Successfully added "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to the Windows driver store.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Successfully installed driver "Microsoft Emulated S3 Device Cap".
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) reference count 1 for the source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA before releasing
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Released the resolved source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{57164F39-9115-4E78-AB55-382F3BD5422D}\{FD149E91-82E0-4A7D-AFA6-2A4166CBD7C0}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Intel 82443BX Pentium(R) II Processor to PCI Bridge'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Generic Monitor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{A9A0F4E7-5A45-4D96-B827-8A841E8C03E6}\{242FF919-07DB-4180-9C2E-B86CB68C8C55}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Numeric data processor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{35FA2E29-EA23-4236-96AE-3A6EBACBA440}\{2450EE40-33BF-4FBD-892E-9FB06E9214CF}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'CD-ROM Drive'.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Exiting with return code 0x00000000
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264)
In advance: Sorry...Hi,
0xc0000359 for storvsc.sys
Looks like Hyper-v Storage Controller driver issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Lucreate fails w/msg cannot check device name d41 for device path abbre
I'm using Live Upgrade to install Solaris 10 8/07 on a V490 currently running Solaris 9 4/04. Sol9 is using SVM to mirror two internal drives with file systems for /, /var and swap. I used format and formatted two new slices for / and /var. LU has been removed and the liveupgrade20 script used to install LU from the Solaris 10 CD. I believe the next step is to lucreate the BE, but the lucreate is failing:
root@animal # lucreate -A 'dualboot' -m /:/dev/md/dsk/d40:ufs,mirror -m /:/dev/dsk/c1t0d0s4,d41:attach -m /var:/dev/md/dsk/d50:ufs,mirror -m /var:/dev/dsk/c1t0d0s5,d51:attach -m /var:/dev/dsk/c1t1d0s5,d52:attach -n sol10
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
ERROR: cannot check device name <d41> for device path abbreviation
ERROR: cannot determine if device name <d41> is abbreviated device path
ERROR: cannot create new boot environment using file systems as configured
ERROR: please review all file system configuration options
ERROR: cannot create new boot environment using options providedIt's probably something simple as this is the time I'm doing an upgrade on my own.
Thanks for any ideas,
GlenI received help elsewhere.
To summarize using the full metadevice names worked:
lucreate -A 'dualboot' -m /:/dev/md/dsk/d40:ufs,mirror -m /:/dev/dsk/c1t0d0s4,/dev/md/dsk/d41:attach -m /:/dev/dsk/c1t1d0s4,/dev/md/dsk/d42:attach -m /var:/dev/md/dsk/d50:ufs,mirror -m /var:/dev/dsk/c1t0d0s5,/dev/md/dsk/d51:attach -m /var:/dev/dsk/c1t1d0s5,/dev/md/dsk/d52:attach -n sol10
(Note: Using the short names (d41, d42 etc) worked with Solaris 10 6/06, but fails with 8/07.)
sysglen -
Hi Guys,
I'm having some issues updating the device packages for my RME 4.3.1 install.
I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
I pulled up the PSU.log and found the following:
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for CM already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : _CURDFMVER=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : DFMVERSION=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO [DFMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageManager : installPackages] : Locking package repository..
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageInstaller : installStep_resolve] : Checking Dependencies...
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : pickUnselectedBasePackages] : SharedSwim2900XL has 17 dependent packages
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageParserAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedDcmaIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[DistributionAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibSwim] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibSwim
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimJobOptionsAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SoftwareAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ConfigAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibCommon] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibCommon
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SystemAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageListAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ContainmentAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[FlashAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[MemoryAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[RemoteStageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimCCOAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedSwimIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedSwimIOS
[ Thu May 27 10:11:50 PDT 2010 ] WARN [PsuPkgResolver : pickLatest] : No packages to pick ..Empty package set passed .
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : populateResolverResult] : All selected packages failed consistency check..
[ Thu May 27 10:11:50 PDT 2010 ] INFO [SimpleProgress : progressInfo] : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageInstaller : installStep_resolve] : Packages selected for install (satisfies consistency check) : []
[ Thu May 27 10:11:50 PDT 2010 ] INFO [SimpleProgress : progressInfo] : Progress: No packages to be installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO [PackageManager : installPackages] : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:31 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:44 PDT 2010 ] INFO [PackageManager : installPackages] : Releasing lock...
[ Thu May 27 10:13:44 PDT 2010 ] INFO [DeviceSupportHistory : init] : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
[ Thu May 27 10:13:44 PDT 2010 ] INFO [DeviceSupportHistory : init] : Number of Events Loaded in init()6
Before i started to bug TAC, I figured I'd post this here.
Let me know your thoughtsLooks like your package repository has been corrupted. TAC can provide a procedure to recover from this corruption. The following DOC indicates why this can happen and has suggestions on how to avoid these problems from re-occuring.
-
Ohasd failed to start Inappropriate ioctl for device at roothas.pl
Hallo!I am trying to install Oracle database 11.2.0.1 on Oracle Linux 6.0 32 bit deployed on VirtualBox.I am setting up a single-instance database on ASM thus doing
Grid installation on a stand-alone server.I launched the Grid installer OUI and when I run the root script
/u01/app/oracle/product/11.2.0/grid/root.sh
I get the following error
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.
When I check the /u01/app/oracle/product/11.2.0/grid/log/joey-oel6/client/crsctl.log it gives me the following error messages
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2012-06-28 14:47:26.259: [ CSSCLNT][3037951696]clssscConnect: gipc request failed with 29 (0x13)
2012-06-28 14:47:26.259: [ CSSCLNT][3037951696]clsssInitNative: connect failed, rc 29
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 0
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 1
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 2
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 3
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 4
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 5
2012-06-28 14:47:26.273: [ OCRRAW][3037951696]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 0
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 1
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 2
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 3
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 4
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 5
2012-06-28 14:47:26.274: [ OCRRAW][3037951696]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2012-06-28 14:47:26.274: [ OCRRAW][3037951696]proprinit:problem reading the bootblock or superbloc 22
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 0
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 1
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 2
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 3
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 4
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 5
2012-06-28 14:47:26.274: [ OCRRAW][3037951696]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2012-06-28 14:47:26.698: [ OCRRAW][3037951696]iniconfig:No 92 configuration
2012-06-28 14:47:26.698: [ OCRAPI][3037951696]a_init:6a: Backend init successful
2012-06-28 14:47:26.698: [ CRSCTL][3037951696]crsctlcss_GetEnvVar: Environment variable NLS_LANG not found
2012-06-28 14:47:26.699: [ CRSCTL][3037951696]crsctlcss_GetEnvVar: Error 21101 in getting environment variable ORACLE_HOME
2012-06-28 14:47:26.700: [ CRSCTL][3037951696]crsctlcss_doclusterkeys: the current number of pinned nodes 0, set is 1
2012-06-28 14:47:27.233: [ CRSCTL][3037951696]crsctl_pin_ocr: set OCR keys succ.
How do I solve this?Hello,
Problem is indeed because of upstart/init incompatibility. Here is the working way:
1) Proceed with the installation as usual until root.sh invocation.
2) Before root.sh edit $GRID_HOME/crs/install/s_crsconfig_lib.pm, go to line 1173 (you should find a code like: if ($srv eq "ohasd") { # Start OHASD).
3) Insert a following snippet before starting OHASD part (line 1173)
my $UPSTART_OHASD_SERVICE = "oracle-ohasd";
my $INITCTL = "/sbin/initctl";
($status, @output) = system_cmd_capture ("$INITCTL start $UPSTART_OHASD_SERVICE");
if (0 != $status)
error ("Failed to start $UPSTART_OHASD_SERVICE, error: $!");
return $FAILED;
4) Create a file /etc/init/oracle-ohasd.conf with the following content inside
# Oracle OHASD startup
start on runlevel [35]
stop on runlevel [!35]
respawn
exec /etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
5) Invoke root.sh
6) Finish the installation.
If you previously ran root.sh (not successfully), simply roll it back:
$GRID_HOME/crs/install/roothas.pl -deconfig -force -verbose
Make changes above and continue.
good luck
Anand -
Ohasd failed to start: Inappropriate ioctl for device, CRS-4124:, CRS-4000:
New install on amazon, 11.2.0-64 image. Did NOT install canned 11.2.0 on the host, just downloaded the grid component and running the installer to configure Grid Infrastructure for a Stand-Alone Server.
Fails with the following error where I do Stand Alone Server or Grid Software only;
$ /u01/app/grid/1120/grid/perl/bin/perl -I/u01/app/grid/1120/grid/perl/lib -I/u01/app/grid/1120/grid/crs/install /u01/app/grid/1120/grid/crs/install/roothas.pl -verbose
2010-04-25 16:46:00: Checking for super user privileges
2010-04-25 16:46:00: User has super user privileges
2010-04-25 16:46:00: Parsing the host name
Using configuration parameter file: /u01/app/grid/1120/grid/crs/install/crsconfig_params
LOCAL ADD MODE
Creating OCR keys for user 'grid', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node domu-12-31-36-00-35-b2 successfully pinned.
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/grid/1120/grid/crs/install/roothas.pl line 296.
root@domU-12-31-36-00-35-B2:[u01/app/grid/1120/grid/install/utl]
Been through the related noted to no avail;
Doc ID 1063552.1 ----> rm -rf /tmp/.oracle /usr/tmp/.oracle /var/tmp/.oracle
Doc ID 969878.1 ----> service syslog restart
And ipV6 is NOT in configured in the hosts file.
Any ideas / solutions?
TIA,
Neil
and restartedHi,
Ran into this myself and then found your note. After much investigating it turns out that the Linux run level on my AMI's is set to 4 (even though the inittab has it set to 3) and the CRS init script init.ohasd expects 3 and 5. Because of that problem, the "init" process was not able to launch the init.ohasd script.
For now the workaound for this problem is to run the system at run levels 3 or 5 before executing the root script. However, I am still trying to figure out why my AMI's are running at 4.
I am curious, if you do read this, did you get this error during the install and ignore it?
Run Level
This is a prerequisite condition to test whether the system is running with proper run level. (more details)
Expected Value
: 3,5
Actual Value
: 4
I did and of course it didn't work. Also, what Amazon AMI did you use?
Thanks,
Larry -
LMS 4: VLAN config fetch failing for all devices
LMS 4.0.1, standalone on W2K8 R2, new install
Vlan config fetch is failing for all devices. If I attempt to put a vlan.dat file in tftpboot and then manually copy a vlan.dat file from a device, the following is returned:
TFTP: error code 2 received - 16739
%Error opening tftp://server_name/vlan.dat (Permission denied)
The Windows application logs ont the server log this:
Log Name: Application
Source: CRMtftp
Date: 6/15/2011 2:07:49 PM
Event ID: 3
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: server_name
Description:
GetEffectiveRightsFromAcl failed: Overlapped I/O operation is in progress.
(997)
I tried restarting crmtftp, but no luck. Any ideas what may be causing this?
-JeffI have the same issue with a freshly installed 4.2 version now:
Log Name: Application
Source: CRMtftp
Date: 2/24/2012 12:30:50 PM
Event ID: 3
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: srvwienlms.nts.local
Description:
GetNamedSecurityInfo failed failed: The operation completed successfully.
(0)
I will also open a TAC case, lets see if we still have to stick with a3.x TFTP binary...
br.herwig -
DNS Fails for NFS Server Shares
When I boot, I get a message that DNS has failed for the NFS server mounts, and the shares do not mount. The message says, "mount.nfs: DNS resolution failed for server: name or service unknown." I have to mount the shares myself. Then when rebooting, I get the same error saying it can't unmount the shares.
this is /etc/resolv.conf:
$ cat /etc/resolv.conf
# Generated by dhcpcd from eth0
# /etc/resolv.conf.head can replace this line
nameserver 208.67.222.222
nameserver 208.67.220.220
# /etc/resolv.conf.tail can replace this line
this is /etc/conf.d/nfs:
# Number of servers to be started up by default
NFSD_OPTS=8
# Options to pass to rpc.mountd
# e.g. MOUNTDOPTS="-p 32767"
MOUNTD_OPTS="--no-nfs-version 1 --no-nfs-version 2"
# Options to pass to rpc.statd
# N.B. statd normally runs on both client and server, and run-time
# options should be specified accordingly. Specifically, the Arch
# NFS init scripts require the --no-notify flag on the server,
# but not on the client e.g.
# STATD_OPTS="--no-notify -p 32765 -o 32766" -> server
# STATD_OPTS="-p 32765 -o 32766" -> client
STATD_OPTS=""
# Options to pass to sm-notify
# e.g. SMNOTIFY_OPTS="-p 32764"
SMNOTIFY_OPTS=""
Do I need to add some option to rpc.statd, or is there some other misconfiguration there? AFAIK it is the default. What else should I look at to fix this? I can ping the server by name, and log in with ssh by name, just fine. It's only the nfs that is failing with DNS.airman99 wrote:
Yahoo! Good news, I've finally solved the problem on my laptop. The message I was receiving turned out merely to be a network timing issue.
The error I was receiving was exactly correct and informative. When /etc/rc.d/netfs ran and executed a 'mount -a -t nfs...' the network was indeed NOT reachable. I am running networkmanager, and apparently during bootup, networkmanager gets loaded, but there is a delay between when networkmanager is loaded and when the network is available. In other words, networkmanager allows the boot process to continue before the network is available.
My daemons are loaded in this order (rc.conf):
DAEMONS=(syslog-ng hal dhcdbd networkmanager crond cups ntpdate ntpd portmap nfslock netfs)
Consequently, if I add a delay to /etc/rc.d/netfs to allow time for the network to come up, then when the NFS shares are mounted, the network is up. In my case I had to add a 3 second delay.
sleep 3
I'm sure this isn't the best way to solve the problem, by editing the system file /etc/rc.d/netfs, because the next upgrade where changes occur to netfs, my fix will get overwritten. But I'll keep it until I figure out the "right" fix.
The real solution is to not load networkmanager in the background, but to force startup to wait for the networok to be up before continuing.
there is the _netdev option you can use in fstab, but that doesn't always work:
http://linux.die.net/man/8/mount
_netdev
The filesystem resides on a device that requires network access (used to prevent the system from attempting to mount these filesystems until the network has been enabled on the system).
Alternatively, you could just add a cronjob to do a mount -a with a sleep 20 in there or something. You might have to play with the sleep value a little to make sure it's long enough -
Timed out waiting for device sys-subsystem-net-devices-enp69s0.device
Hi all,
Since quite some time I have been waiting for Arch Linux to startup (and shutdown), and today I wanted to figure out what was going wrong. I found out that I could find the boot log file with journalctl, and this seems to be the issue:
Oct 13 21:01:52 localhost systemd[1]: Job sys-subsystem-net-devices-enp69s0.device/start timed out.
Oct 13 21:01:52 localhost systemd[1]: Timed out waiting for device sys-subsystem-net-devices-enp69s0.device.
Oct 13 21:01:52 localhost systemd[1]: Dependency failed for dhcpcd on enp69s0.
Oct 13 21:01:52 localhost systemd[1]: Starting Network.
Oct 13 21:01:52 localhost systemd[1]: Reached target Network.
Oct 13 21:01:52 localhost systemd[1]: Mounting /mnt/homesrv/storage...
Now, enp69s0 is my LAN network interface, which I barely use, and my WLAN connection is handled by NetworkManager. However, I can't find out what I'm supposed to do to stop this behaviour. I tried:
systemctl disable sys-subsystem-net-devices-enp69s0.device
But that does not seem to solve anything. Can anyone help me out?
Last edited by Hmail (2013-10-13 19:09:53)Andreaskem wrote:Maybe try "systemctl disable [email protected]".
That did the trick! I didn't want to disable the device because I might use it once in a while.
The shutdown issue is not solved yet, but that seems to be an issue with a samba share that is unmounted after the network services are shutdown. I'll delve in the wiki to figure out how to fix that. But for now, I can at least start my machine up within seconds. Thanks a lot! -
Tacacs authentication fails for one user account for only one switch
Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
Socket opens: 157
Socket closes: 156
Socket aborts: 303
Socket errors: 1
Socket Timeouts: 2
Failed Connect Attempts: 0
Total Packets Sent: 1703
Total Packets Recv: 1243
Expected Replies: 0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
PraseyHi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad -
Logitech MX900 Mouse & Solaris 10 x86 results in "Postattach failed for..."
This USB-Mouse will not work with Solaris 10. I have the bluetooth-set Logitech DiNovo
keyboard and MX900 mouse. As seen in the following logfile, the keyboard is recognized and
the device is created, but the mouse fails. So i have to use my old dusty ps/2 mouse
with this nice keyboard as a workaround.
dmesg-output start:
Feb 10 20:56:35 HAL9000 usba: [ID 349649 kern.info] General Purpose
USB Hub
Feb 10 20:56:35 HAL9000 genunix: [ID 936769 kern.info] hubd0 is
/pci@0,0/pci1043,80a6@1d/hub@1
Feb 10 20:56:35 HAL9000 genunix: [ID 408114 kern.info]
/pci@0,0/pci1043,80a6@1d/hub@1 (hubd0) online
Feb 10 20:56:36 HAL9000 usba: [ID 912658 kern.info] USB 1.10 device
(usb46d,c704) operating at low speed (USB 1.x) on USB 1.10 external hub:
device@1, usb_mid0 at bus address 3
Feb 10 20:56:36 HAL9000 usba: [ID 349649 kern.info] Logitech USB
Receiver 06D263
Feb 10 20:56:36 HAL9000 genunix: [ID 936769 kern.info] usb_mid0 is
/pci@0,0/pci1043,80a6@1d/hub@1/device@1
Feb 10 20:56:36 HAL9000 genunix: [ID 408114 kern.info]
/pci@0,0/pci1043,80a6@1d/hub@1/device@1 (usb_mid0) online
Feb 10 20:56:36 HAL9000 usba: [ID 912658 kern.info] USB 1.10 interface
(usbif46d,c704.config1.0) operating at low speed (USB 1.x) on USB 1.10
external hub: keyboard@0, hid0 at bus address 3
Feb 10 20:56:36 HAL9000 usba: [ID 349649 kern.info] Logitech USB
Receiver 06D263
Feb 10 20:56:36 HAL9000 genunix: [ID 936769 kern.info] hid0 is
/pci@0,0/pci1043,80a6@1d/hub@1/device@1/keyboard@0
Feb 10 20:56:36 HAL9000 genunix: [ID 408114 kern.info]
/pci@0,0/pci1043,80a6@1d/hub@1/device@1/keyboard@0 (hid0) online
Feb 10 20:56:36 HAL9000 usba: [ID 912658 kern.info] USB 1.10 interface
(usbif46d,c704.config1.1) operating at low speed (USB 1.x) on USB 1.10
external hub: mouse@1, hid1 at bus address 3
Feb 10 20:56:36 HAL9000 usba: [ID 349649 kern.info] Logitech USB
Receiver 06D263
Feb 10 20:56:36 HAL9000 genunix: [ID 936769 kern.info] hid1 is
/pci@0,0/pci1043,80a6@1d/hub@1/device@1/mouse@1
Feb 10 20:56:36 HAL9000 genunix: [ID 667643 kern.warning] WARNING:
Postattach failed for hid1
dmesg-output end
The "Postattach..." message appears 4 times while booting. Disabling
or enabling legacy usb in bios has no effect.
My hardware: P4 Northwood 3GHz, Asus P4C800E deluxe, 1024MB RAM,
Creative Audigy2, GeForce 6800GT.
Any ideas?
Bye,
Peter.thanks for your reply! this is the (long) output:
-bash-3.00# echo '::usba_debug_buf' | mdb -k
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
hid0: hid_pm_busy_component failed: 0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsen
se: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x0 count = 0x0
s2u0: scsa2usb_handle_scsi_cmd_sub_class: opcode = 0x3 count = 0x14
ehci0: ehci_check_for_short_xfer: residue=2 direction=0x100
ehci0: ehci_check_for_short_xfer: requested data=20 received data=18
s2u0: cdb: 3 rqsense: 70 0 2 0 0 0 0 10 0 0
0 0 3a 0 0 0 0 0 0 0
s2u0: total=0x2 cmd_xfercount=0x14 residue=0x0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
hid0: hid_pm_busy_component failed: 0
>>>>
-bash-3.00#
I hope this will help
Bye,
Peter. -
[SOLVED] dmraid "Timed out waiting for device" at boot
Created a bug report with solution proposal: https://bugs.archlinux.org/task/33166
I created a virtual machine to demonstrate the problem
https://docs.google.com/open?id=0B40Hp1 … WZUQ21xZk0
The root and the other mount points are all on one raid disk. Although the root mounts quickly, other mount points cause timeouts at boot time.
dmraid prints that all /dev/mapper/isw_* devices are created.
I think /dev/disk/by-uuid/* links are created too, but for some reason systemd doesn't see them.
After boot I can execute "mount -a" without errors.
here's my fstab:
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=e89249d8-49a5-415b-8f9b-97de5cfbe82d / ext3 defaults
UUID=c37f8bdd-3d6c-495f-bf8a-5ef059e55254 swap swap defaults 0 0
UUID=91988343-dd89-43b9-8975-babb0b9510a2 /media/ARCHLINUXNEW ext4 nofail 0 1
UUID=62C813E9C813B9ED /media/distrpart ntfs-3g rw,nofail
UUID=E0A1-D623 /media/realboot vfat rw,codepage=866,iocharset=utf8,umask=002,noatime,nofail
# journalctl -b
Dec 15 00:25:24 localhost kernel: firewire_core 0000:05:03.0: created device fw0: GUID 0011d800017a5dd7, S400
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-E0A1\x2dD623.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-E0A1\x2dD623.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/realboot.
Dec 15 00:26:50 localhost systemd[1]: Job media-realboot.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-E0A1\x2dD623.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-62C813E9C813B9ED.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-62C813E9C813B9ED.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/distrpart.
Dec 15 00:26:50 localhost systemd[1]: Job media-distrpart.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-62C813E9C813B9ED.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/ARCHLINUXNEW.
Dec 15 00:26:50 localhost systemd[1]: Job media-ARCHLINUXNEW.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/91988343-dd89-43b9-8975-babb0b9510a2.
Dec 15 00:26:50 localhost systemd[1]: Job systemd-fsck@dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.service/start failed with result 'dependency
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /dev/disk/by-uuid/c37f8bdd-3d6c-495f-bf8a-5ef059e55254.
Dec 15 00:26:50 localhost systemd[1]: Reached target Swap.
Note the 1.5 minute pause
# mount | grep /dev/mapper
/dev/mapper/isw_ebaifefjbf_Volume0p9 on / type ext3 (rw,relatime,stripe=64,data=ordered)
/dev/mapper/isw_ebaifefjbf_Volume0p1 on /media/realboot type vfat (rw,noatime,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp866,iocharset=utf8,shortname=mixed,errors=remount-ro)
/dev/mapper/isw_ebaifefjbf_Volume0p8 on /media/ARCHLINUXNEW type ext4 (rw,relatime,stripe=64,data=ordered)
/dev/mapper/isw_ebaifefjbf_Volume0p5 on /media/distrpart type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
Last edited by leniviy (2012-12-22 16:06:25)I've ran into exactly same problem lately, but finally solved it.
Setup: Intel Fake RAID, mirror, partitioned as:
/dev/mapper/isw_dfjeffgfaj_rootvol1 /boot
/dev/mapper/isw_dfjeffgfaj_rootvol2 /
/dev/mapper/isw_dfjeffgfaj_rootvol3 /home (dm-crypted)
In /etc/fstab i had following mountpoints:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
/dev/mapper/isw_dfjeffgfaj_rootvolp1 /boot ext4 rw,relatime,data=ordered 0 2
and boot hung on waiting for /dev/mapper/isw_dfjeffgfaj_rootvolp1. Solution involves changing dev path to UUID:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
UUID=44809529-11d9-4f53-9652-7b97ed077225 /boot ext4 rw,relatime,data=ordered 0 2
For some reason symlinks /dev/mapper/isw* are not present during systemd mount.
Maybe you are looking for
-
Graphics problem on iMac G5 w/ iSight.
I just tried installing a 1GB RAM stick in a 17" iMac G5 (iSight). The machine has 512MB of RAM (the standard), and a 1.9Ghz processor. It is running Mac OS X 10.5.7. My friend, who owns the iMac told me she'd been seeing some weird graphics artefact
-
Why does my powerbook lid resist closing?
I have a used powerbook G4, and since I've had it, the lid always makes a clicking or grinding sound when I try to shut it. It seems to be getting worse, and I can definitely feel resistance when I try to close it. I'm worried that I'm damaging it ev
-
Custom SAP report used to display an average standard cost per material.
Hi All, I need to implement a report with the following functionality, This is a custom SAP report used to display an average standard cost per material. Standard cost data is stored in SAP at the Material/Plant level. This report will gather the i
-
Adding Shift Register to Stacked Case structure
According the the Help, you can add Shift Registers to Structures. The Stacked Sequence is a Structure, but I don't see the option to add a Shift Register when I right click on the left side of the Structure. Am I missing something? I want to run
-
Mandatory condition MWST is missing (in CRM4.0)
HI experts, we are working on CRM 4.0 and R/3 as a backend system. we have downloaded all pricing master data from R/3 to CRM. when creating Sales transaction in CRM,system is throwing an error message stating that "Mandatory condition MWST is missin