Unmount of /home failed (45)

I have verbose mode enabled, and when I shut down my MBP I gets the error:
unmount of /home failed error (45)
unmount of /net failed error (45)
and it hangs. I need to force shut down at that point.
This is an intermittent error I have had for a while. And it seems to happen when the machine has run for maybe a week or longer on end (it sleeps in-between), and not when it is only up for a day or two.
I do not seem to be able to find any reports under 'Diagnostic and Usage Messages' in console.
I suspect that the error happens earlier, but have no clue as to why and how.
Googling showed that Kaspersky or Parallels, might be a culprit , but I have never had these installed.
I repaired permission but no succes there either.
Anybody any idea?

ChangeAgent wrote:
I have verbose mode enabled, and when I shut down my MBP I gets the error:
unmount of /home failed error (45)
unmount of /net failed error (45)
and it hangs. I need to force shut down at that point.
Anybody any idea?
I use verbose mode too and I get the same failed error each time I shut down my Mac Pro but the shutdown proceeds to power off without issue. I wonder if the problem is instead related to the lines above it. It looks like you've got your system drive separate from your data drive. Also, do you have Time Machine running, perhaps over a network? The "Reply queue not empty?" may be related to that and may be the real problem.

Similar Messages

Unmount of /home failed error (45)

hi all have any of you had this show up when shutting down "unmount of /home failed error (45)"
it also includes /net i have not had a lot of luck finding any info on this error it shows up when
shutting down after graphics close and the screen is black showing services shutting down
i have my system set up in verbos so i can see start up and shut down messages

hi i only see these errors when shutting down here what terminal looks like from home and byron-duncans-mac-pro:/ Byron$ ls -al
total 41133
drwxrwxr-t@ 33 root admin 1190 Nov 18 12:57 .
drwxrwxr-t@ 33 root admin 1190 Nov 18 12:57 ..
-rw-rw-r--@ 1 Byron admin 12292 Nov 18 14:16 .DS_Store
drwx------ 3 root admin 102 Nov 3 23:47 .Spotlight-V100
d-wx-wx-wt 2 root admin 68 Nov 18 12:42 .Trashes
-rw-r--r-- 1 root admin 0 Nov 3 23:47 .com.apple.timemachine.supported
drwx------ 18 root admin 612 Nov 18 12:56 .fseventsd
-rw------- 1 root wheel 65536 Nov 3 23:47 .hotfiles.btree
drwxr-xr-x 2 root wheel 68 Sep 24 02:08 .vol
drwxrwxr-x@ 57 root admin 1938 Nov 17 18:46 Applications
-rw-r--r--@ 1 root admin 2048 Nov 4 02:29 Desktop DB
-rw-r--r--@ 1 root admin 2 Nov 4 02:29 Desktop DF
drwxrwxr-x@ 16 root admin 544 Nov 4 13:24 Developer
drwxrwxr-t@ 54 root admin 1836 Nov 4 15:16 Library
drwxr-xr-x 2 root wheel 68 Sep 23 16:37 Network
drwxr-xr-x 4 root wheel 136 Nov 15 19:42 System
drwxr-xr-x 5 root admin 170 Nov 4 00:29 Users
drwxrwxrwt@ 4 root admin 136 Nov 18 12:56 Volumes
drwxr-xr-x 40 root wheel 1360 Nov 3 23:32 bin
drwxrwxr-t@ 2 root admin 68 Sep 23 16:37 cores
dr-xr-xr-x 2 root wheel 512 Nov 18 12:56 dev
lrwxr-xr-x 1 root admin 11 Nov 3 23:32 etc -> private/etc
dr-xr-xr-x 2 root wheel 1 Nov 18 12:56 home
-rw-r--r--@ 1 root wheel 10256044 Oct 31 19:48 mach_kernel
-rw-r--r-- 1 root wheel 10696809 Oct 9 23:38 mach_kernel.ctfsys
dr-xr-xr-x 2 root wheel 1 Nov 18 12:56 net
drwxr-xr-x@ 7 root wheel 238 Nov 10 22:27 private
drwxr-xr-x 66 root wheel 2244 Nov 15 19:40 sbin
lrwxr-xr-x 1 root admin 11 Nov 3 23:32 tmp -> private/tmp
drwxr-xr-x 12 root wheel 408 Nov 4 02:08 usr
lrwxr-xr-x 1 root admin 11 Nov 3 23:32 var -> private/var
byron-duncans-mac-pro:/ Byron$ cd /user
-bash: cd: /user: No such file or directory
byron-duncans-mac-pro:/ Byron$ cd /users
byron-duncans-mac-pro:users Byron$ ls -al
total 0
drwxr-xr-x 5 root admin 170 Nov 4 00:29 .
drwxrwxr-t@ 33 root admin 1190 Nov 18 12:57 ..
-rw-r--r-- 1 root wheel 0 Sep 23 19:43 .localized
drwxr-xr-x+ 31 Byron staff 1054 Nov 18 12:57 Byron
drwxrwxrwt 4 root wheel 136 Nov 4 01:19 Shared
byron-duncans-mac-pro:users Byron$

Unmount of home failed 45 unmount of net failed 45

My 8 core mac pro will not turn off
unmounting of home failed 45
unmount failed net of 45

I had the same problem happening with my 27' iMac with OS 10.6.8 (Snow Leopard). After trying out everything that was suggested (repair permissions, empty caches etc. etc.) and almost giving up on this after many days, I eventually found out that the culprit was Kapersky 2011 Antivirus Mac! I had installed the software for testing purposes, and then trashed the application again, because I didn't like it. Since then I had this shutdown problem.
I finally found out that I can fix the problem by downloading the 30 day trial version of the Kapersky software once again and use the uninstaller included in the .dmg to remove any traces/leftovers from the Kapersky software.

Lion hangs on shutdown "unmount of /net failed (45)"

Hi,
my Lion MacBookPro hangs 95% of the times when shutting down with the messages
com.apple.launchd 1 com.apple.launchd 1 System: Stray process at shutdown: PID 296
com.apple.launchd 1 com.apple.launchd 1 System: Sending SIGTERM to PID 396 and continuing.....
syncind disks... Killing all processes
continuing
unmount of /home failed (45)
unmount of /net failed (45)
Any help with that? I suspect Parallels having to do with that. It just stops there and stays there for hours......
Some more console log messages (higher above) are
/prl_hid/ Parallels HID Helper stopped.
Kext unloading is disabled (com.parallels.kext.prl_hid_hook)
Kext unloading is disabled (com.parallels.kext.prl_hid_hook)
Can't remove kext com.parallels.kext.prl_hyervisor; services failed to terminate - 0xdc008818
Any help appreciated......
GeniusBar Guys couldn't help.
Best regards,
Peter

Dear DS Store,
Thanks for the response. (Is this what you mean in your step by step tutorial by giving credit?)
I should also preface my run-through of your tips by noting that my wife's Macbook air will shut down properly and get past the "unmount of /net failure" business without problems if I do not run iTunes (current version 10.6.1). I can run Microsoft Office, Chrome, Mail etc no problem without triggering this problem. In these circumstances I've been able to see that the next messages that SHOULD show up after the "unmount of /net failed (45)" are:
done
MACH Reboot
wlEvent EN0 EN0 Link DOWN
(These lines blink by so quickly that I couldn't read them, I had to freeze frame a video I made of a proper shutdown sequence).
However, when I run iTunes, I ALWAYS get this failure where it freezes after the "unmount of /net failure (45) line" and is never able to shut down properly.
This problem occurs with both local accounts as well as with mobile users syncing to my portable home directory server. (Even with a local account with nothing in the iTunes library).
I should also note that before I got your response to my question, I had already undertaken to reinstall OS X (with full software update done immediately after), and still was encountering the same problems after.
Regarding your steps:
Step #1 SMC reset - Done, did not change outcome - still hung at shutdown
Step #2 PRAM reset - Done, still hangs at shutdown
Step #3 Startup manager - not done as I have no problem with getting into the boot volume
Step #4 - Repair disk - DIsk repaired using Lion recovery HD, no errors found, did not change outcome
Step #5 - reset home directory permissions and ACLs - done for all local accounts, portable home directory accounts, root - still hanging at precisely the same point
Step #6 - hardware test not done, problem seems to be software/OS related. (going to run extended tests overnight)
Step #7,8 - did not seem pertinent to this situation, as it is possible to boot into all accounts no problem.
Step #9 - all data backed up on Time Machine, and also synced to server
Step #10 - software updated done
Step #11 - permissions repaired - still problematic
Step #12 - Onyx cache cleaning - plists check out fine, cleaned out all caches (except system logs), did all the maintenance tabs (did pretty well everything I could see as options) - problem still persists. (I had hoped that cleaning kernel and dyld caches might do the trick, but no).
Step #13 - Deleted ~/Library/Preferences/com.apple.iTunes.whatever and anything.plist (3 files altogether) - same problem. (There did not appear to be any other corrupt plists that needed deletion)
Step #14 - Activity monitor - no runaway processes. mdworker busy, but due to spotlight caches being purged in step 12. System Diagnostic log shows nothing.
Step #15 - there isn't any third party software on my wife's macbook air that isn't running on my own macbook air and macbook pro (both of which are not facing this problem). I tried to uninstall and reinstall iTunes prior to getting your advice (this is a PITA, by the way!!!!), and had ended up with 10.6.0 installed (since the downloadable installer from Apple at the moment isn't the latest 10.6.1 version), and software update not recognizing the need to update, which is when I went ahead and reinstalled OSX. This did not clear the problem.
Step #16 - created a brand spanking new account called test. Problem continues to occur with the new account.
At this moment am wanting some feedback on what you think sofar of the problem before I go ahead and do something more destructive or tedious.
I should note that I do not seem to be able to find any reference to the problem in the system.log or kernel.log files in Console. When I look through kernel.log there is nothing logged around the time the failure to shut down occurs, and in system.log, the last logged item is usually 1-2 seconds before I get the stream of other stuff that occurs as shown in the screenshot above, which includes a statement to the effect of "Userspace shutdown finished at [timestamp here]" etc etc.... I do not know if this other stuff is logged elsewhere, or not at all, as I have never seen this stuff in the logs in console.
Thanks in advance.
Peter T

Using patch plans for 12.1.0.2 target oracle home fails with 'PREREQ_MESG: Unable to get the version of OPatch'

We are attempting to use patch plan to apply PSU and one-offs to a new 12.1.0.2 database oracle home. Our EM version is 12.1.0.4.
We are experiencing the same issue described in ''Bug 20271609 : Unable to get the version of OPatch". This bug is closed as 'duplicate bug to filer' but we do not appear to have visibility into what patch/bug fixes the issue.
Description from the above mentioned bug is our same issue. We do not have this issue when we use patch plans against an 11.2.x oracle_home target. It is unique to 12.1.0.2 oracle_home target.
Description from the bug:
The Plan failed in step "Run Prerequisite Checks" with the following errors:
PREREQ_NAME: Minimum Version of OPatch
PREREQ_DESC: Check if the required version of OPatch is present on the target
PREREQ_TYPE: PATCH_TOOL_CHECK
PREREQ_STATUS: FAILED
PREREQ_MESG: Unable to get the version of OPatch at
/u01/app/oracle/product/12.1.0/dbhome_2/Opatch
We have opened an SR to see if we can get more info on what was already identified as a bug. Has anyone else experienced this issue? If so, can you share any patches or workarounds (other than manually applying patches) that you found useful?
Thanks.

You'll probably get the same info from Support, but the workaround is to use the Patch Database (however that doesn't work if there's no DB target associated to that home). If you were trying to do patchign out of place (clone home, patch, then move db's), EM can do this for you. If you're just installing a new DB Home and trying to patch, then i don' think there's another workaround. The base bug is marked fixed though, so a backport for the 12.1.0.6 plugin should be available very soon. I would ask the support analyst to request the backport for your plugin/patch level...

Startup class : Context lookup for a Home fails in a new thread

Hi All,
I am having a funny problem with Weblogic Startup class.In the startup method,
I am creating an instance of InitialContext. I called look up in this context
for a bean's home. It works and it retuns the proper Home interface.
But, when I use the same InitialContext instance in a new thread, and again if
I call look up for the same bean's home, the server fails with a SecurityException.
I don't have any Role based Security for this bean.
Btw, I am using Weblogic 5.1 & SP7.
Any ideas or help, appreciated..
Thanks in Advance
Srikanth Goli
Here is the code.
public String startup(String name, Hashtable args) throws Exception {
InitialContext initialContext = null;
try {
initialContext = new InitialContext();
UserPreferencesHome userPreferencesHome =
     (UserPreferencesHome)initialContext.lookup
     (UserPreferencesHome.DEFAULT_URL);
//This prints Properly
System.err.println("StartupTest: userPrefsHome is " + userPreferencesHome);
} catch(Exception e) {
e.printStackTrace();
Thread th = new Thread(new TestThread(initialContext));
th.start();
return "ok";
class TestThread implements Runnable {
Context context;
public TestThread(InitialContext ctx) {
context = ctx;
public void run() {
try {
//This is failing
UserPreferencesHome userPreferencesHome1 =
     (UserPreferencesHome)context.lookup
     (UserPreferencesHome.DEFAULT_URL);
System.err.println("UserPreferencesHome1 in the thread is " + userPreferencesHome1);
} catch(Exception e) {
e.printStackTrace();
Here is the exception, I am getting
java.lang.SecurityException: User "guest" does not have Permission "lookup" base
d on ACL "weblogic.jndi.com.capgroup.btps".
at weblogic.security.acl.Security.logAndThrow(Security.java:372)
at weblogic.security.acl.Security.checkPermission(Security.java:254)
at weblogic.jndi.internal.NamingSecurityManagerImpl.checkPermission(Nami
ngSecurityManagerImpl.java:98)
at weblogic.jndi.internal.NamingSecurityManagerImpl.checkLookup(NamingSe
curityManagerImpl.java:45)
at weblogic.jndi.toolkit.BasicWLContext.resolveName(BasicWLContext.java:
737)
at weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:133)
at weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:574)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at com.capgroup.btps.server.TestThread.run(StartupTest.java:49)
at java.lang.Thread.run(Thread.java:484)

Hi All,
I am having a funny problem with Weblogic Startup class.In the startup method,
I am creating an instance of InitialContext. I called look up in this context
for a bean's home. It works and it retuns the proper Home interface.
But, when I use the same InitialContext instance in a new thread, and again if
I call look up for the same bean's home, the server fails with a SecurityException.
I don't have any Role based Security for this bean.
Btw, I am using Weblogic 5.1 & SP7.
Any ideas or help, appreciated..
Thanks in Advance
Srikanth Goli
Here is the code.
public String startup(String name, Hashtable args) throws Exception {
InitialContext initialContext = null;
try {
initialContext = new InitialContext();
UserPreferencesHome userPreferencesHome =
     (UserPreferencesHome)initialContext.lookup
     (UserPreferencesHome.DEFAULT_URL);
//This prints Properly
System.err.println("StartupTest: userPrefsHome is " + userPreferencesHome);
} catch(Exception e) {
e.printStackTrace();
Thread th = new Thread(new TestThread(initialContext));
th.start();
return "ok";
class TestThread implements Runnable {
Context context;
public TestThread(InitialContext ctx) {
context = ctx;
public void run() {
try {
//This is failing
UserPreferencesHome userPreferencesHome1 =
     (UserPreferencesHome)context.lookup
     (UserPreferencesHome.DEFAULT_URL);
System.err.println("UserPreferencesHome1 in the thread is " + userPreferencesHome1);
} catch(Exception e) {
e.printStackTrace();
Here is the exception, I am getting
java.lang.SecurityException: User "guest" does not have Permission "lookup" base
d on ACL "weblogic.jndi.com.capgroup.btps".
at weblogic.security.acl.Security.logAndThrow(Security.java:372)
at weblogic.security.acl.Security.checkPermission(Security.java:254)
at weblogic.jndi.internal.NamingSecurityManagerImpl.checkPermission(Nami
ngSecurityManagerImpl.java:98)
at weblogic.jndi.internal.NamingSecurityManagerImpl.checkLookup(NamingSe
curityManagerImpl.java:45)
at weblogic.jndi.toolkit.BasicWLContext.resolveName(BasicWLContext.java:
737)
at weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:133)
at weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:574)
at javax.naming.InitialContext.lookup(InitialContext.java:350)
at com.capgroup.btps.server.TestThread.run(StartupTest.java:49)
at java.lang.Thread.run(Thread.java:484)

Unmounting root fs fails on shutdown

Hey all,
since a few days COMMAND PID USER FD init 1 root cwd init 1 root rtd init 1 root txt init 1 root mem init 1 root mem init 1 root 10u kthreadd 2 root cwd kthreadd 2 root rtd kthreadd 2 root txt unknown migration 3 root cwd migration 3 root rtd migration 3 root txt unknown ksoftirqd 4 root cwd ksoftirqd 4 root rtd ksoftirqd 4 root txt unknown watchdog/ 5 root cwd watchdog/ 5 root rtd watchdog/ 5 root txt unknown migration 6 root cwd migration 6 root rtd migration 6 root txt unknown ksoftirqd 7 root cwd ksoftirqd 7 root rtd ksoftirqd 7 root txt unknown watchdog/ 8 root cwd watchdog/ 8 root rtd watchdog/ 8 root txt unknown events/0 9 root cwd events/0 9 root rtd events/0 9 root txt unknown events/1 10 root cwd events/1 10 root rtd events/1 10 root txt unknown khelper 11 root cwd khelper 11 root rtd khelper 11 root txt unknown async/mgr 12 root cwd async/mgr 12 root rtd async/mgr 12 root txt unknown kblockd/0 13 root cwd kblockd/0 13 root rtd kblockd/0 13 root txt unknown kblockd/1 14 root cwd kblockd/1 14 root rtd kblockd/1 14 root txt unknown kacpid 15 root cwd kacpid 15 root rtd kacpid 15 root txt unknown kacpi_not 16 root cwd kacpi_not 16 root rtd kacpi_not 16 root txt unknown kseriod 17 root cwd kseriod 17 root rtd kseriod 17 root txt unknown khungtask 18 root cwd khungtask 18 root rtd khungtask 18 root txt unknown pdflush 19 root cwd pdflush 19 root rtd pdflush 19 root txt unknown kswapd0 21 root cwd kswapd0 21 root rtd kswapd0 21 root txt unknown aio/0 22 root cwd aio/0 22 root rtd aio/0 22 root txt unknown aio/1 23 root cwd aio/1 23 root rtd aio/1 23 root txt unknown crypto/0 24 root cwd crypto/0 24 root rtd crypto/0 24 root txt unknown crypto/1 25 root cwd crypto/1 25 root rtd crypto/1 25 root txt unknown ata/0 450 root cwd ata/0 450 root rtd ata/0 450 root txt unknown ata/1 452 root cwd ata/1 452 root rtd ata/1 452 root txt unknown ata_aux 453 root cwd ata_aux 453 root rtd ata_aux 453 root txt unknown scsi_eh_0 457 root cwd scsi_eh_0 457 root rtd scsi_eh_0 457 root txt unknown scsi_eh_1 473 root cwd scsi_eh_1 473 root rtd scsi_eh_1 473 root txt unknown scsi_eh_2 483 root cwd scsi_eh_2 483 root rtd scsi_eh_2 483 root txt unknown scsi_eh_3 484 root cwd scsi_eh_3 484 root rtd scsi_eh_3 484 root txt unknown kjournald 564 root cwd kjournald 564 root rtd kjournald 564 root txt unknown kondemand 900 root cwd kondemand 900 root rtd kondemand 900 root txt unknown kondemand 905 root cwd kondemand 905 root rtd kondemand 905 root txt unknown ksuspend_ 1409 root cwd ksuspend_ 1409 root rtd ksuspend_ 1409 root txt unknown khubd 1469 root cwd khubd 1469 root rtd khubd 1469 root txt unknown hd-audio0 1914 root cwd hd-audio0 1914 root rtd hd-audio0 1914 root txt unknown kpsmoused 2006 root cwd kpsmoused 2006 root rtd kpsmoused 2006 root txt unknown iwl3945 2007 root cwd iwl3945 2007 root rtd iwl3945 2007 root txt unknown phy0 2017 root cwd phy0 2017 root rtd phy0 2017 root txt unknown kmmcd 2081 root cwd kmmcd 2081 root rtd kmmcd 2081 root txt unknown khpsbpkt 2087 root cwd khpsbpkt 2087 root rtd khpsbpkt 2087 root txt unknown knodemgrd 2248 root cwd knodemgrd 2248 root rtd knodemgrd 2248 root txt unknown usbhid_re 3320 root cwd usbhid_re 3320 root rtd usbhid_re 3320 root txt unknown bluetooth 3446 root cwd bluetooth 3446 root rtd bluetooth 3446 root txt unknown kjournald 3463 root cwd kjournald 3463 root rtd kjournald 3463 root txt unknown krfcommd 4048 root cwd krfcommd 4048 root rtd krfcommd 4048 root txt unknown pdflush 6018 root cwd pdflush 6018 root rtd pdflush 6018 root txt unknown udevd 10990 root cwd udevd 10990 root rtd udevd 10990 root txt udevd 10990 root mem udevd 10990 root mem udevd 10990 root mem udevd 10990 root 0u udevd 10990 root 1u udevd 10990 root 2u udevd 10990 root 3r udevd 10990 root 4u udevd 10990 root 5u syslog-ng 13248 root cwd syslog-ng 13248 root rtd syslog-ng 13248 root txt syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root mem syslog-ng 13248 root 0r syslog-ng 13248 root 1w syslog-ng 13248 root 2w syslog-ng 13249 root cwd syslog-ng 13249 root rtd syslog-ng 13249 root txt syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root mem syslog-ng 13249 root 0r syslog-ng 13249 root 1w syslog-ng 13249 root 2w syslog-ng 13249 root 3u syslog-ng 13249 root 4w syslog-ng 13249 root 5u syslog-ng 13249 root 6r syslog-ng 13249 root 7w syslog-ng 13249 root 8w syslog-ng 13249 root 9w syslog-ng 13249 root 10w syslog-ng 13249 root 12w init 13252 root cwd init 13252 root rtd init 13252 root txt init 13252 root mem init 13252 root mem init 13252 root 0u init 13252 root 1u init 13252 root 2u bash 13253 root cwd bash 13253 root rtd bash 13253 root txt bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root mem bash 13253 root 0u bash 13253 root 1u bash 13253 root 2u bash 13253 root 255u lsof 13304 root cwd lsof 13304 root rtd lsof 13304 root txt lsof 13304 root mem lsof 13304 root mem lsof 13304 root mem lsof 13304 root 0u lsof 13304 root 1w lsof 13304 root 2u lsof 13304 root 3r lsof 13304 root 4r lsof 13304 root 5w lsof 13304 root 6r lsof 13305 root cwd lsof 13305 root rtd lsof 13305 root txt lsof 13305 root mem lsof 13305 root mem lsof 13305 root mem lsof 13305 root 4r lsof 13305 root 7w Does anyone have Johannes my root filesystem refuses to umount on shutdown claiming it were busy. On every bootup a recovery is done which bothers me. The failing umount suggests using lsof to find the process causing the problem. I switched to runlevel 1 and did so, but the output is not very helpful for me...
TYPE DEVICE SIZE/OFF NODE NAME
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
REG 8,5 31352 37632 /sbin/init
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 133581 1984 /lib/ld-2.10.1.so
FIFO 0,12 0t0 1195 /dev/initctl
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/2/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/3/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/4/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/5/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/6/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/7/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/8/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/9/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/10/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/11/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/12/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/13/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/14/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/15/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/16/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/17/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/18/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/19/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/21/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/22/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/23/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/24/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/25/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/450/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/452/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/453/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/457/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/473/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/483/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/484/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/564/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/900/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/905/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/1409/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/1469/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/1914/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/2006/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/2007/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/2017/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/2081/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/2087/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/2248/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/3320/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/3446/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/3463/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/4048/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
/proc/6018/exe
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
REG 8,5 99948 7631 /sbin/udevd
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 50746 1769 /lib/libnss_files-2.10.1.so
REG 8,5 133581 1984 /lib/ld-2.10.1.so
CHR 1,3 0t0 1185 /dev/null
CHR 1,3 0t0 1185 /dev/null
CHR 1,3 0t0 1185 /dev/null
DIR 0,9 0 1 inotify
unix 0xf1959000 0t0 56175 socket
sock 0,4 0t0 56176 can't identify protocol
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
REG 8,5 235740 3439 /usr/sbin/syslog-ng
REG 8,5 17914 1987 /lib/libattr.so.1.1.0
REG 8,5 98082 1786 /lib/libnsl-2.10.1.so
REG 8,5 82987 172784 /usr/lib/libz.so.1.2.3.3
REG 8,5 13771 1744 /lib/libdl-2.10.1.so
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 211279 2024 /lib/libpcre.so.0.0.1
REG 8,5 15405 1991 /lib/libcap.so.2.16
REG 8,5 34551 3638 /usr/lib/libwrap.so.0.7.6
REG 8,5 1561754 55876 /usr/lib/libcrypto.so.0.9.8
REG 8,5 317643 64401 /usr/lib/libssl.so.0.9.8
REG 8,5 16703 35966 /usr/lib/libevtlog.so.0.0.0
REG 8,5 875900 2512 /usr/lib/libglib-2.0.so.0.2000.4
REG 8,5 133581 1984 /lib/ld-2.10.1.so
CHR 1,3 0t0 1185 /dev/null
CHR 1,3 0t0 1185 /dev/null
CHR 1,3 0t0 1185 /dev/null
DIR 8,5 4096 474297 /var/run
DIR 8,5 4096 2 /
REG 8,5 235740 3439 /usr/sbin/syslog-ng
REG 8,5 17914 1987 /lib/libattr.so.1.1.0
REG 8,5 98082 1786 /lib/libnsl-2.10.1.so
REG 8,5 82987 172784 /usr/lib/libz.so.1.2.3.3
REG 8,5 13771 1744 /lib/libdl-2.10.1.so
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 211279 2024 /lib/libpcre.so.0.0.1
REG 8,5 15405 1991 /lib/libcap.so.2.16
REG 8,5 34551 3638 /usr/lib/libwrap.so.0.7.6
REG 8,5 1561754 55876 /usr/lib/libcrypto.so.0.9.8
REG 8,5 317643 64401 /usr/lib/libssl.so.0.9.8
REG 8,5 16703 35966 /usr/lib/libevtlog.so.0.0.0
REG 8,5 875900 2512 /usr/lib/libglib-2.0.so.0.2000.4
REG 8,5 50746 1769 /lib/libnss_files-2.10.1.so
REG 8,5 133581 1984 /lib/ld-2.10.1.so
CHR 1,3 0t0 1185 /dev/null
CHR 1,3 0t0 1185 /dev/null
CHR 1,3 0t0 1185 /dev/null
unix 0xf1958400 0t0 58926 /dev/log
FIFO 0,6 0t0 58922 pipe
unix 0xf1959800 0t0 58929 /var/run/syslog-ng.ctl
REG 0,3 0 4026531978 /proc/kmsg
REG 8,5 40938 475550 /var/log/syslog.log
REG 8,5 17572696 475551 /var/log/everything.log
REG 8,5 11246832 475552 /var/log/kernel.log
REG 8,5 14397607 475553 /var/log/messages.log
REG 8,5 5666055 475561 /var/log/daemon.log
DIR 8,5 4096 2 /
DIR 8,5 4096 2 /
REG 8,5 31352 37632 /sbin/init
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 133581 1984 /lib/ld-2.10.1.so
CHR 5,1 0t0 1177 /dev/console
CHR 5,1 0t0 1177 /dev/console
CHR 5,1 0t0 1177 /dev/console
DIR 8,5 4096 22 /root
DIR 8,5 4096 2 /
REG 8,5 607644 64366 /bin/bash
REG 8,5 1821760 130893 /usr/lib/locale/locale-archive
REG 8,5 50746 1769 /lib/libnss_files-2.10.1.so
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 13771 1744 /lib/libdl-2.10.1.so
REG 8,5 345186 2004 /lib/libncursesw.so.5.7
REG 8,5 33753 10766 /lib/libhistory.so.6.0
REG 8,5 245785 10765 /lib/libreadline.so.6.0
REG 8,5 11125 62090 /usr/lib/gconv/ISO8859-1.so
REG 8,5 35764 302973 /usr/share/locale/de/LC_MESSAGES/bash.mo
REG 8,5 133581 1984 /lib/ld-2.10.1.so
CHR 5,1 0t0 1177 /dev/console
CHR 5,1 0t0 1177 /dev/console
CHR 5,1 0t0 1177 /dev/console
CHR 5,1 0t0 1177 /dev/console
DIR 8,5 4096 22 /root
DIR 8,5 4096 2 /
REG 8,5 122304 57 /usr/sbin/lsof
REG 8,5 1821760 130893 /usr/lib/locale/locale-archive
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 133581 1984 /lib/ld-2.10.1.so
CHR 5,1 0t0 1177 /dev/console
REG 8,5 0 75 /root/lsof_out
CHR 5,1 0t0 1177 /dev/console
DIR 0,3 0 1 /proc
DIR 0,3 0 59163 /proc/13304/fd
FIFO 0,6 0t0 59168 pipe
FIFO 0,6 0t0 59169 pipe
DIR 8,5 4096 22 /root
DIR 8,5 4096 2 /
REG 8,5 122304 57 /usr/sbin/lsof
REG 8,5 1821760 130893 /usr/lib/locale/locale-archive
REG 8,5 1584604 1986 /lib/libc-2.10.1.so
REG 8,5 133581 1984 /lib/ld-2.10.1.so
FIFO 0,6 0t0 59168 pipe
FIFO 0,6 0t0 59169 pipe
an Idea what to do? Thanks!

I noticed one thing, but that's not to say there's not other problems too: your syslog-ng is still running. At that point in shutdown, I think all your daemons including it should be shut down. I don't know why it's still running. Do you just launch it by putting "syslog-ng" in your DAEMONS array in /etc/rc.conf? It's possible that you're not really getting an accurate picture here of the state of your system at shutdown. I debug these issues by hacking /etc/rc.shutdown. Before the "Unmounting Filesystems" block you could do a
lsof / # I think this is the way to display only open files on the root filesystem, but you should read man lsof to be sure
ls /var/run/daemons
read -p "continue? " reply # pause here
...rest of /etc/rc.shutdown

Automated Disk Mount/Unmount via diskutil fails?

Greetings, all.
Here's what I have:
A PM G5 with two HDs each identically partitioned into three parts
A desire to automate a backup routine that will run every night while I sleep and not have to stare at the back-up drive partitions all day long.
Here's what I've done:
1. Created a script with PsyncX to automate the backup. (Some of the script text is below, if you're interested.)
2. Edited the script to contain:
diskutil mountDisk /dev/disk0
What happens:
If I run the script by hand by calling it directly (sudo /etc/Backup.sh), the script mounts all three partitions, syncs to the back-up, and un-mounts all three back-up partitions when done.
Perfect.
If however, I run this from a cron job, it does not mount any of the partitions, and hence the back-up does not run. (Incidentally, it works perfectly on our server, but does not run on the desktop...)
Any ideas?
Thanks in advance,
-B.
---- Script Excerpts ----
# Mounting Back-up Volume
echo ' ' >> /var/log/System_Backup.log
echo 'Mounting /dev/disk0/...' >> /var/log/System_Backup.log
date >> /var/log/System_Backup.log
diskutil mountDisk /dev/disk0
# System Disk Backup
if !( -d '/Volumes/System Backup'/ ) then
echo "The target drive is not present, exiting."
exit 1
endif
echo 'Beginning System Backup... ' >> /var/log/System_Backup.log
date >> /var/log/System_Backup.log
/usr/bin/runpsync 0 0 0 '/' '/Volumes/System Backup'
echo 'System Backup Complete.' >> /var/log/System_Backup.log
date >> /var/log/System_Backup.log
# Unmounting Back-up Volume and Cleaning up
diskutil unmountDisk /dev/disk1
echo 'Full System Backup Complete.' >> /var/log/System_Backup.log
date >> /var/log/System_Backup.log
echo ' ' >> /var/log/System_Backup.log
2 iBooks and an iMac Core Duo Mac OS X (10.4.8)

Yes, it is running. I've added lines like:
echo 'mark 1' >> /var/log/System_Backup.log
to the script. Lines above the diskutil line show and a line directly following the diskutil line shows in the log, but it never goes any farther than that.
The big issue here is that this script works... If I run I call it from the command line with:
sudo /etc/Backup.sh
Then it operates as advertised.
If cron calls /etc/Backup.sh it fails.
So, perhaps the questions are:
Is this a permissions issue? I think cron runs as root by default, no?
Is this a diskutil problem? If so, how do I get some feedback from diskutil? Nothing shows up in the console or system logs, and if I run it by hand, it works properly.
Is this a difference between OS X server and OS X? The machine that this is working on is running Server 10.4.8, and the machine that it is not working on is running "the normal" 10.4.8.
Is this a /dev/disk0 vs a /dev/disk1 problem? It's working on the server with /dev/disk1, and not of the desktop with /dev/disk0.
Thanks for all of the help so far.
-B.
2 iBooks and an iMac Core Duo Mac OS X (10.4.8)

OC4J:HOME failed to initialize after installation of ADF Runtime

Hi Everyone!
I already asked this question in the Jdeveloper forum but I have some questions with regards to the OAS that's why I am reposting it again...
I am trying to deploy an application developed using Jdeveloper 10.1.3 in Oracle 10g AS version 10.1.2 residing in a different server. I have followed the steps required in deploying to an older version of OAS. I recompiled my applications to use J2SE1.4. I have also downloaded the standalone ADF Runtime Installer so that I can install the ADF components in OAS.
After the installation of the ADF Runtime, my oc4j:home process failed to initialize/startup. When i try to manually start it in the OEM, i received the following errors:
An error was encountered while loading page. Entity not found.
Resolution:
Entity not found
Base Exception:
The plugin OC4J did not have any documents associated with the Document Key OC4J_INSTANCE_ID:home;
Resolution:
Contact Oracle Support. Exception thrown by plugin "orionp":
The plugin OC4J did not have any documents associated with the Document Key OC4J_INSTANCE_ID:home;
Resolution:
Contact Oracle Support
There are no logfiles as well... When I tried to uninstall the ADF Runtime using the installer, i got the following error:
Uninstall Option is not supported for AS.
For the OAS gurus, I just want to know if its possible to recreate the oc4j:home?
Can i just delete the problematic oc4j:home and just create a new one?
We already have some forms-based applications that are running in our OAS. Will it still work properly if I recreated the oc4j:home?
Thanks!
JED

/OraHome/j2ee/home/confirm/server.xml check this xml file and it is empty or not. If it is empty than copy server.xml.old file in the same path directory to your server.xml file. Then try to start your home instance again.

Win 10 home fail to install several times. What next?

Windows 10 home update is listed as failed several times. Why, What's wrong, and can I fix it?

It is possible that you had corrupt or missing install files. Were there any compatibility issues noted before you attempted the upgrade? Be sure you have your Windows key on hand, if required and go to this site, option 3 or 4 should do it:http://www.tenforums.com/tutorials/2267-windows-10-upgrade-installation.html#step3

Wifi connection at home fails with macbook pro

My MBP's connection with my home wi-fi often fails, occurring any time from a minute to 30 minutes after I connect. That is, I connect fine for a while and then find that I have no connection.
Two other devices, an ipod touch and an older Powerbook, also connect to the modem but almost never have any connection problem.

I have a Belkin Wireless N router at home that my iPhone connects to beautifly...Except for the fact that it reverts to EGDE for web pages, and cannot connect to the iTunes store.
I own a coffee house, and there I have a Linksys G router, and it connects with no problems at all. iTunes music store works great there, downloaded a song and all.
I am going to try going to a static IP adress and remove the erroneous 192.168.2.1 in the DNS listing. I believe this to be a problem with Belkin Routers. I spent an hour on tech support with them and no luck yesterday.

When I try turn-off the MBAir freeze

When I use ITunes and I try turn-off or reebot the system is freeze.
appear error
unmount of/home failed (45)
unmount of/net failed (45)
I check and repair disk permissions but the problem persist.

When I use ITunes and I try turn-off or reebot the system is freeze.
appear error
unmount of/home failed (45)
unmount of/net failed (45)
I check and repair disk permissions but the problem persist.

My macbook pro does not shutdown. I suspect parallels is causing it?

Com.apple.launched 1 com.apple.shutdown_monitor 582 shutdown monitor has exited
Com.parallels.kext.prl.net 7.0.5094.749908 is loading
Kext unloading is disabled (com.parallels.kext.prl_netbridge)
Kext unloading is disabled (com.parallels.kext.prl_netbridge)
Com.parallels.kext.vnic 7.0.15094.749908 is unloading
Com.parallels_kext_prl_vnic_bus: wait for detach for 0
Com.parallels_kext_prl_vnic_bus: detach handler for 0
Com.parallels_kext_prl_vnic_bus: detached 0
Com.parallels_kext_prl_vnic: destroyed vnic 0
Com.parallels_kext_prl_vnic_bus: wait for detach for 1
Com.parallels_kext_prl_vnic_bus: detach handler for 1
Com.parallels_kext_prl_vnic_bus: detached 1
Com.parallels_kext_prl_vnic: destroyed vnic 1
Kext uploading is disabled (com.parallels.kext.prl_vnic).
Kext uploading is disabled (com.parallels.kext.prl_vnic).
Kext uploading is disabled (com.parallels.kext.prl_usb_connect)
Kext uploading is disabled (com.parallels.kext.prl_usb_connect)
/prl_hid/parallels HID helper stopped
kext uploading is disabled (com.parallels.kext.prl_hid_hook).
kext uploading is disabled (com.parallels.kext.prl_hid_hook).
Can’t remove kext com.parallels.kext.prl_hypervisor:services failed to terminate-0xdc008018
Can’t remove kext com.parallels.kext.prl_hypervisor:services failed to terminate-0xdc008018
Com.apple.launched 1 com.apple.securityd 0 Job was last to exit during shutdown of:system
Com.apple.launched 1 com.apple.launched 1 system:;userspace shutdown finished ar Monday 5/28 12:04:02 2012
Com.apple.launched 1 com.apple.launched 1 system:userspace shutdown took approx. 3 sec
Com.apple.launched 1 com.apple.launched 1 system:stay process at shutdown PID 210 PPID 1 PGID 56 prl_disp_servic
System:sending SIGTERM to PID 210 and continuing…
System:
About to call:reboot (RB_HALT).
Continuing
Unmounts of/ home failed (45)
Unmounts of/ net failed (45)

If you have Apple Care, give them a call and get a case number. Otherwise,
take the computer to an Apple store or an AASP. Whichever is more convenient for you.

MacBook doesn't fully restart

Hello,
I'm running Leopard 10.5.2 on a Macbook. I have a strange problem: it doesn't fully restart but it does shutdown.
When I hit Shutdown, the computer shuts down without any problem. But if I hit Restart, then everything is apparently normal and the screen turns off, but the fans and the sleep light keep on. I then have to hold the power button down until the computer turns off.
I have checked for applications that could prevent the restart, but I couldn't find anything. I tried to reset the PRAM and SMC, without any results. I also used the boot verbose mode where I got the same for both modes except for the last line:
continuing
unmount of /home failed (45)
unmount of /net failed (45)
done
WARNING: etherdetachinet6 can't detach ipv6 from en1
(Restart) MACH Reboot
(Shutdown) CPU Halted
I don't know what do these errors mean, but as they both appear when shutting down or restarting, I guess they're not the problem. But are they any problem?
Is this some kind of firmware problem? Can anybody help? Thanks!

I also have the exact same issue... though it took a while to figure out as the nvram text just blinks on the screen for a second while shutting down.
Any ideas out there? For some reason I feel the IPv6 leaves me vulnerable despite running Little Snitch and Netbarrier firewall

IMac 21,5" hängt beim Ausschalten

Der iMac hängt sich beim Runterfahren auf und im Verbosemodus erhält man die Fehlermeldung
continuing
unmount of /home failed (45)
unmount of /net failed (45)
Alle mir bekannten Maßnahmen führten zu keiner Lösung. (Festplatte, Rechte usw. alles i.O.)
Hardware-Übersicht:
Modellname:    iMac
Modell-Identifizierung:    iMac10,1
Prozessortyp:    Intel Core 2 Duo
Prozessorgeschwindigkeit:    3,06 GHz
Anzahl der Prozessoren:    1
Gesamtzahl der Kerne:    2
L2-Cache:    3 MB
Speicher:    8 GB
Busgeschwindigkeit:    1,07 GHz
Boot-ROM-Version:    IM101.00CC.B00
SMC-Version (System):    1.52f9
WER hat eine LÖSUNG für dieses Problemes ???
Mfg
Jürgen123

dietmarfromdeu,
if you start up your iMac in Safe mode, do you still have Bluetooth problems with your Apple wireless keyboard and Magic Mouse?

Unmount of /home failed (45)

Similar Messages

Maybe you are looking for