Unmovable file issue with partitions in Windows 7

I am using Thinkpad SL510, and I am attempting to shrink the C drive to create a new partition. My available space on C: is about 270 gigabytes, but the computer will only let me shrink this to about 160 gigabytes available, whether using Shrink Volume in Win7 or a special program. I tried removing unmovable files (paging file and shadow copy storage area) as suggested by Win7 help, but this did not allow me to shrink the drive any further. Is anyone aware of a Lenovo-specific unmovable file that might be found on the C drive?
Thanks.
Moderator note; subject edited

In addition to disabling system protection and choose "no paging file" did you also try to disable hibernation that will remove the hiberfil.sys? You can disable hibernation with the command "powercfg -h off" and then re-enable with "powercfg -h on" after the shrink.
If that doesn't help there are programs that can show you where the files are located on the hdd as well as show if they are unmovable or not. Then you might find out the reason why you are unable to make the current partition smaller than 160gb available.
-gan

Similar Messages

Any issues with PE7 and Windows 7?

Hi All,
I am considering purchasing a second computer. I have had great success with PE7 and Vista, But I can't get Vista on the new Alienware I want to buy. So, has anyone had any issues with PE7 and Windows 7? I have read many posts where there are issues with PE8 and Windows7.
Thanks, Stan

It's a toshiba laptop.
4 gig DDR3
core duo
320 hard drive - partitioned
I also use a dual screen - 22" lcd monitor
I don't use it a lot, since I have a desktop. I've noticed having a
dedicated video card makes a world of difference in editing. This might be
your problem; a dedicated high end video card is the way to go.
If I do simple compilations I don't have any problems. I usaully am making
a DVD of soccer games. If there is a lot of special effects I'll use my
desktop that has XP.

Issue with implementing Find window

Hi,
I am facing an issue with implementing Find window. The find window everything is working fine, but when I am opening the form I am facing the following error
'Error: To retrieve the Information in this block, use menu option view -> query by example -> Enter to invoke enter-query mode, then view -> Query by example > Run to run your query..'
when I click 'Ok', it is navigating to the FInd window.
How can I avoid the above error message?
And also after searching, I navigate to the main window to display the records, but the 'Find' torch icon is not getting enabled, how do I that?
Thanks,
Ramu

Thanks for the reply.
Yes, I have the QUERY_FIND trigger with the code as 'APP_STANDARD.EVENT('QUERY_FIND');'
And also 'first navigation data block ' to my result block. Now that the error is gone, But still the Find Icon is not enabled
Please advice.
Thanks,
Ramu
Edited by: Ramu Chennuri on Oct 21, 2008 8:32 AM

Sync issue with 650 to windows XP Pro

I am having an issue with syncing my palm 650 to my computer. The Hotsync manager version on desktop is 7.0.2. The palm is 5.4.0. All the user settings are correct between the two devices. Here is a copy of my Hotsync log.
HotSync session started on 07/03/09 16:33:08, and completed in 6.0 seconds
PalmUpdate05 - QueryOk (Set verbose loging)
PalmUpdate05 - QueryOk (Set loopback ready write)
PalmUpdate05 - QueryOk (Set debug no forty second timeout)
PalmUpdate05 - RegistryWrite (NOTIFIER_STAGE = 'INSTALLING')
PalmUpdate05 - BroadcastSuccess (10 = 'Wizard wakeup install')
PalmUpdate05 - RegistryWrite (USERNAME = 'Tom Lord')
PalmUpdate05 - RegistryWrite (USER_DIR = 'C:\Documents and Settings\TPLord\My Documents\Palm OS Desktop\LordT')
PalmUpdate05 - Customization Mode is marked on
PalmUpdate05 - BroadcastSuccess (20 = 'Installing the Checker application')
PalmUpdate05 - BroadcastSuccess (30 = 'Verifying device version')
PalmUpdate05 - RemoteCall (16409 = 'No Remote Call')
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - Failed to Install = C:\Program Files\palmOne\CapPackage\PackageVersion.txt.pdb, continuing...
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - RegistryWrite (DEVICE_CAP_SIZE = '1308')
PalmUpdate05 - Free device Ram is (1480704)
PalmUpdate05 - Device Free Mem (1480704) - Device Cap Size (1308)
PalmUpdate05 - Cap Payload size on disk is (0)
PalmUpdate05 - Payload size on disk is (0)
PalmUpdate05 - Needed Free Mem (0) - Needed Cap Size (0) - Needed Buffer (102400)
PalmUpdate05 - DEVICE SPACE = (1482012) - NEEDED SPACE = (102400)
PalmUpdate05 - RegistryWrite (MEM_CAP_NEEDED_KB = '100')
PalmUpdate05 - RegistryWrite (MEM_CAP_KB = '1447')
PalmUpdate05 - BroadcastSuccess (34 = 'Device Memory for Customization passed')
PalmUpdate05 - RemoteCall (1308 = 'No Remote Call')
PalmUpdate05 - BroadcastError (1604 = 'Customization data can not be upgraded')
HotSync Error: An application cancelled sychronization or failed to respond to a HotSync notification. Please ensure that you are not currently editing data using applications such as Palm OS Desktop or Install Tool. (8009)
PalmUpdate05 - HS_SYNC_FAILURE Received
Please help!!!
Post relates to: Treo 650 (Verizon)

Click on the following link to the kb.palm.com webpage for the article regarding How to resolve an 8009 error while trying to synchronize data (Windows).
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=1005
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/650/verizon/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Photo file issues with iWeb and Aperture....also too much duplicating!!

A little background, before I get into my iWeb issue.....
Years ago I tried iPhoto, but I didn't like how it duplicated all my photo files and I wasn't very fond of the file structure it created. Years later (last month) I got Aperture. Aperture (still has a long way to go) also duplicates all your files and places them in their own file structure. If I can get along with Aperture (and if it will get along with my other programs), I won't mind putting all my files into the file structure it creates. But for now, I still have my original files in the original file structure I have had for many years as a back up.
On to my issue with iWeb and Aperture....
To add photos to iWeb, you can either go into the iWeb media center or you can drag and drop photos from other locations.
1st: iWeb media center
To get my photos into the media center, I would have to load them into iPhoto (iP 6 does allow you to keep your original file structure, but it still creates .jpg files, which fills up your hard-drive. More duplicates I don't need or want). So that is out for me. iP6 will let you view and use your Raw files.
Another way is to drag and drop your file structure directly into the media center window. I don't think this duplicates any files (at least I haven't been able to find any), but it takes an awfully long time to thumbnail all your photos (several hours and still waiting for 22K + files). Also, it won't show any Raw files. Again, out for me.
Aperture won't let you drag and drop its library into the media center at all. So if I was to move all my files into the Aperture Library, I wouldn't be able to access them for iWeb at all.....Out for me.
2nd: Drag and Drop
I was able to drag and drop Raw files directly into iWeb from C1 Pro, Adobe Bridge and Adobe Lightroom.
As I said before, I am trying to move over to Aperture. However, Aperture won't let me drag and drop photos. What is the deal here??? These are both Apple programs and they won't play nice with each other. Very annoying.
Anyway, I put a link below to my iWeb test webpage I made. All the photos were Raw files that I did a drag and drop from C1 Pro, Adobe Bridge and Lightroom. There were no problems with the publishing.
http://web.mac.com/phil_navarro/iWeb/Site%202/Drag%20and%20Drop%20test.html
So, does anyone know if they can get photos from Aperture to work?? Thanks for any responses.
Phil
G5 Desktop Mac OS X (10.4.4)

Jedi,
Perhaps you are right.
I am not a web developer and I will never be. I don't feel like spending countless hours learning how to use Dreamweaver or some other Pro web app. iWeb looked like a way to start making websites of my photos for my friends and family (much easier and better than Home Page on .Mac). All I was asking was for a way to drag and drop my photos (especially Raw files) with Aperture. Which I can do with Lightroom, Adobe Bridge and C1 Pro, and without using iPhoto.
I am not a Pro photographer either, but I purchased Aperture based on what was advertised on the Apple website. From that ad, Aperture fit my photo needs almost to a tee. I am looking to adjust Raw files, Crop, Archive and keep my use of Hard Disk space down to a minimum. I can use Photoshop for the other 5% of things I do. However, Aperture has some issues (if you own it, then you already know. If you don't, you can read the Aperture Forum) This is one of the reasons I never went to iPhoto for archiving. I didn't like the way it duplicated all my files, taking up more disk space and its file structure. So even though Aperture won't play nice with other programs, I was surprised that it wouldn't play nice with any Apple programs.
After reading your post and based on what you are saying, everyone either needs to have/learn/use Pro apps only or have/learn/use iApps only. Don't Cross the Streams!!
I guess that means Apple will need to fix DVD Studio Pro. It uses photos that are in your iPhoto library and music from iTunes (iApps in a Pro app??....for shame...."it was never intended"). Also, DVD SP won't read the Aperture library. Does that mean there are 3 platforms? Pro, iApp and Mediocre??
Now I have 2 questions:
1. Can someone please tell me which apps are Pro and iApp, or if there is Mediocre? I don't want to mix them up and "Cross the Streams".
2. Again....is there anyway to use Aperture with iWeb?
TIA,
Narvon

Screen display issue with InDesign CS4 (Windows)

I just upgraded from CS2 to CS4. I can open and use InDesign with no problems, until I try to switch to another application. Then, when I try to go back to InDesign, all I can see is the portion of the bar at the top of the screen that shows the link to Bridge, the view options and a bit of the outline of a palette or two. I have a two monitor setup. Most of the palettes are on the auxillary monitor and they show up just fine. The main display is where I'm having the issue. I can toggle in and out of Photoshop with no display issues. I haven't tried working with anything else from the CS4 package besides InD and Photoshop. This was not an issue with any CS2 product (Dreamweaver, Fireworks, InDesign, Photoshop, Flash). Nor has it been an issue with any of the other software I am running (so far).
When the display vanishes, I can see the "data" from the program I was trying to toggle out of. For example, if I try to toggle between this page and InD right now, I can see most of this page except for the part of the page obscured by the outline of the control palette (that one reminiscent of pagemaker) and the little bits at the top. I can't see the project I'm working on. I can't see the File/Edit/etc. bar at the top of the page. A Control/Shift/Save will lock up the program completely. Then, I see the "save as" menu box (in addition to the browser screen around it) but the program is locked up. I can close everything on the computer and reboot and open InDesign to resume work--that is until I need to do something like edit a photo to drop into a layout. Then the issue occurs all over again.
Windows machine; XP Pro, service pack 3 build 2600; NVidea GeForce 9600 GT graphics card.

Bob, thanks for the info about the 6.0.2 patch. I'll try grabbing that today. This morning, on the first boot, I can't even see the program when I open it--just the snip of the command palette and part of the very top bar. Very irritating.
Peter, I have tried maximizing, closing, reopening, etc. everything else I can think of. Same issue. I finally just bit the bullet and went back to CS2, rebuilding the current project so I can get the work done by deadline. I'll look for new video drivers this afternoon after I get back on track timewise on this newsletter. Weird that this display issue should just affect the one Adobe program though, and not the others if it is a video driver problem. I didn't do a lot of work in Dreamweaver--just enough to see if it displayed the same weird behaviour. Nope. Nor does Photoshop. Nor does Bridge. Nor does Acrobat. nor does any other software on the machine.

Many issues with WRT160N v3 (Windows 7 related?)

Ok so here's the story.
Several months ago I purchased a WRT160N v2. I was connecting four devices. 1 XP machine, 1 Vista machine, 1 PS3, and 1 Xbox 360.
The XP machine is using Wireless-N PCI Adapter model no. WMP300N. The Vista machine is using a Wireless-N USB Network Adapter with Dual-Band, model no. WUSB600N
The process was fairly straight forward and I was successful in getting everything set up correctly. It worked great for the most part barring any unexpected wireless crashes.
A few weeks ago I accidentally bricked the router when trying to upgrade the firmware. It was my mistake and I should have been thinking but it happened. I was able to get a replacement from Linksys and I received the WRT160N v3
Sadly this router hasn't provided me with the same easy of installation.
Right now the situation is a little different than before. I am running a Windows 7 machine right now. It's up to date and working great. I haven't noticed any issues with the OS other than some random driver issues here and there.
I first attempted to just plug the router into my modem to see if my Windows 7 machine would automatically see it and connect. To my surprise it actually did. It connected and I was able to get online.
But here's the problem, my speed when connected was horrible. It would range anywhere from 75-1Mbps. For comparison, when on Windows XP I would get a locked 130Mbps. In addition to that, the LAN connection will not work. At all. It see's the connect, it shows it's connected and online. Then when I attempt to get online it fails and knocks me back to local access only.
I then attempted to set up the connection using the included disc for v3. This was problematic due to compatibility issues I assume. It didn't fair any better.
The final thing I did was plug my computer directly to the router without connection to the internet and disconnected from the Wireless and attempted to upgrade the firmware. THIS PROCESS WAS SUCCESSFUL. It did not fail and brick the router. I did it correctly this time. To repeat, this did not brick the router.
Ok, so I guessed it was due to Windows 7? I called Linksys up and they said they were unable to support the unreleased beta OS. I'm fine with that.
Next I decided to see if I could get my Vista machine online. With this I decided to run through the setup process that comes with router. I followed the steps to the T. Doing exactly what they told me to do. When it finished it showed it did have connection to the Internet. When the Linksys Easy Link Advisor started up and attempted to get me on wireless, it failed. It shows it lost connection and was unable to regain connection. Attempting to statically assign myself an IP address fails as well.
Using the LANA port with this router on the Vista machine works perfectly.
Right now I'm falling back to a very very old router. It's a Linksys Network Everywhere NR041 wired router. This router works rock solid with my Vista, Windows 7, PS3, and 360 all plugged in and only has some minor overheating issues (common with this model).
My questions:
Does the WRT160N v3 have issues with Windows 7?
Why exactly am I have so many issues with it at all?
Are there issues with my wireless card and Windows 7?
Would the compatibility issues cause the LAN connections to fail between the router and my Windows 7 machine?
Is there a better router solution for me?
I would prefer to not have to revert back to Windows XP as I am enjoying Windows 7.
I would appreciate any help I can get as I'm fairly unhappy with these two products so far.
Thank you.

There is a compatibilty issue with the Wireless Adapter and Windows 7 as it seems there are no specific Windows 7 Drivers to install the adapter...So basically that could be the reason why Windows 7 keeps loosing the Wireless Connection...
Also remember to reset the router to factory defaults after any firmware upgrade, then setup the router again from scratch. If you have not done this since your last firmware upgrade, please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it.
To reset the router press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Don't use the CD to re-configure the router, instead do a manual setup...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Also adjust the Wireless Settings on your Router -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
Message Edited by Carrot on 07-14-2009 04:34 PM

Website Owner having new issues with Clients and Windows 8

I own a website that has a home-programmed chat. We've been in business about 12 years without any issues with compatibility. The chat is programmed in C and runs in a standard browser.
Lately I've had a few users (3 or 4) that have upgraded their machines and can no longer run the chat.
Most users that use Windows 8, or 7, or Vista, or whatever, have no problems. They can use the latest versions of IE, Firefox, Chrome, whatever they choose.
However, these users with problems can use none of the above.
I've gone through standard programs that block a chat, like firewalls and other spyware preventions. Shutting these off doesn't resolve the problem. Conflicting programs doesn't seem to be an issue, either. They aren't touch screen so I don't believe it
is a problem with the video card.
So that brings me back to the OS. The common thread seems to be that they are HP computers, and they have a new install of Windows 8. I think that there might be a missing DLL or other C Library that HP's installation of Windows 8 might be lacking.
Any suggestions on if I'm on the right track, and more importantly, how do I fix this problem?

Hi，
Seems this is a web-based chatting program, I suggest you add the site to a compatibility view list, (launch IE, Tools\Compatibility View list) then check this issue again. Check the error message and infromation recorded in the event viewer to find out
the cause.
Make sure the computers have all the latest updates, especially for video and audio drivers.
Clear the cache\temporary internet files in IE, or test this issue in a no add-ons mode.
From your description, it also sounds like a "defect\bug" for the chatting-program on Windows 8 on HP computers, if so, it should be related with development. you may find more help in the developer forum
Internet Explorer Extension Development Forum
http://social.msdn.microsoft.com/Forums/ie/en-US/home?forum=ieextensiondevelopment
Yolanda Zhu
TechNet Community Support

Uiadump32 - issue with 64 bit windows 7 recovery?

My daughter has a HP DV6 Laptop model 2010sa.
The hard drive has failed but when we use the recovery disks we get an error about uiadump32 failing.
When I use the recovery DVDs for the laptop, it loads them and then restarts a couple of times. BUT, when it gets to the windows setup screen, listing "Preparing driver installation" etc, a failure occurs. uiadump32.exe has stopped working.
From other research it seems existing partitions can be an issue, but the drive was wiped using fdisk on a linux live boot before installation. It looks to me like the recovery manager needs to be updated in some way (WIndows 7 is 64 bit on this laptop).
Any one a solution?
Thanks

Hi,
Assuming this is just an issue with the recovery process, there's a straight forward work-around you may want to consider.
Before trying the following, make sure you can still read the Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version of Windows that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional software and drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Issues with airport and windows XP

just installed XP on my mac (cant believe i just typed that!) and running airport extreme and expresses (no WEP) and can connect on the macbook running OSX (10.4.6) no problem. boot into XP (pro) and i get a connection, strong signal, all that jazz, but when i launch explorer, no connection. I have tried to ping google.com from the command line, again, nada.
But the signal strength is good on the XP side, and connecting fine when logged in on the OSX side.

Beatriz,
Not that we know of, but honesty forces me to say that we haven't tested it ourselfs yet, since we still use Windows/2000.
On the other hand, from my experience issues with CDM always were more dependent on the version of the browser
or Word you are using and less of Windows versions. It would not surprise me if using the Word templates with
Word from Office XP would know some issues. Those would than be caused by changed behaviour in the way Word
deals with macro's.
What the rest of the iDevelopment Accellerator Suite concerns, this can be easily found out by checking the
compatability of Designer and Developer against Windows XP.
With kind regards, Jan Kettenis

Insert performance issue with Partitioned Table.....

Hi All,
I have a performance issue during with a table which is partitioned. without table being partitioned
it ran in less time but after partition it took more than double.
1) The table was created initially without any partition and the below insert took only 27 minuts.
Total Rec Inserted :- 2424233
PL/SQL procedure successfully completed.
Elapsed: 00:27:35.20
2) Now I re-created the table with partition(range yearly - below) and the same insert took 59 minuts.
Is there anyway i can achive the better performance during insert on this partitioned table?
[ similerly, I have another table with 50 Million records and the insert took 10 hrs without partition.
with partitioning the table, it took 18 hours... ]
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 4195045590
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 643K| 34M| | 12917 (3)| 00:02:36 |
|* 1 | HASH JOIN | | 643K| 34M| 2112K| 12917 (3)| 00:02:36 |
| 2 | VIEW | index$_join$_001 | 69534 | 1290K| | 529 (3)| 00:00:07 |
|* 3 | HASH JOIN | | | | | | |
| 4 | INDEX FAST FULL SCAN| PK_ACCOUNT_MASTER_BASE | 69534 | 1290K| | 181 (3)| 00:00
| 5 | INDEX FAST FULL SCAN| ACCOUNT_MASTER_BASE_IDX2 | 69534 | 1290K| | 474 (2)| 00:00
PLAN_TABLE_OUTPUT
| 6 | TABLE ACCESS FULL | TB_SISADMIN_BALANCE | 2424K| 87M| | 6413 (4)| 00:01:17 |
Predicate Information (identified by operation id):
1 - access("A"."VENDOR_ACCT_NBR"=SUBSTR("B"."ACCOUNT_NO",1,8) AND
"A"."VENDOR_CD"="B"."COMPANY_NO")
3 - access(ROWID=ROWID)
Open C1;
Loop
Fetch C1 Bulk Collect Into C_Rectype Limit 10000;
Forall I In 1..C_Rectype.Count
Insert test
     col1,col2,col3)
Values
     val1, val2,val3);
V_Rec := V_Rec + Nvl(C_Rectype.Count,0);
Commit;
Exit When C_Rectype.Count = 0;
C_Rectype.delete;
End Loop;
End;
Total Rec Inserted :- 2424233
PL/SQL procedure successfully completed.
Elapsed: 00:51:01.22
Edited by: user520824 on Jul 16, 2010 9:16 AM

I'm concerned about the view in step 2 and the index join in step 3. A composite index with both columns might eliminate the index join and result in fewer read operations.
If you know which partition the data is going into beforehand you can save a little bit of processing by specifying the partition (which may not be a scalable long-term solution) in the insert - I'm not 100% sure you can do this on inserts but I know you can on selects.
The APPEND hint won't help the way you are using it - the VALUES clause in an insert makes it be ignored. Where it is effective and should help you is if you can do the insert in one query - insert into/select from. If you are using the loop to avoid filling up undo/rollback you can use a bulk collect to batch the selects and commit accordingly - but don't commit more often than you have to because more frequent commits slow transactions down.
I don't think there is a nologging hint :)
So, try something like
insert /*+ hints */ into ...
Select
     A.Ing_Acct_Nbr, currency_Symbol,
     Balance_Date,     Company_No,
     Substr(Account_No,1,8) Account_No,
     Substr(Account_No,9,1) Typ_Cd ,
     Substr(Account_No,10,1) Chk_Cd,
     Td_Balance,     Sd_Balance,
     Sysdate,     'Sisadmin'
From Ideaal_Cons.Tb_Account_Master_Base A,
     Ideaal_Staging.Tb_Sisadmin_Balance B
Where A.Vendor_Acct_Nbr = Substr(B.Account_No,1,8)
   And A.Vendor_Cd = b.company_no
      ;Edited by: riedelme on Jul 16, 2010 7:42 AM

Issues with CDM and Windows XP?

Hi,
My client is planning an upgrade to Windows XP Professional. They use the I-Development Accelerators, including the CDM.
Are there any known issues or problems with using CDM in an XP environment?
THanks,
Beatriz.

Beatriz,
Not that we know of, but honesty forces me to say that we haven't tested it ourselfs yet, since we still use Windows/2000.
On the other hand, from my experience issues with CDM always were more dependent on the version of the browser
or Word you are using and less of Windows versions. It would not surprise me if using the Word templates with
Word from Office XP would know some issues. Those would than be caused by changed behaviour in the way Word
deals with macro's.
What the rest of the iDevelopment Accellerator Suite concerns, this can be easily found out by checking the
compatability of Designer and Developer against Windows XP.
With kind regards, Jan Kettenis

Is there an issue with Swing on Windows 7?

Hi,
I'm running the latest version of Java on Windows 7. "java -version" returns the following:
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b07)
Java HotSpot(TM) Client VM (build 17.0-b17, mixed mode, sharing)
However, when I try to run the JDialog example at "http://download-llnw.oracle.com/javase/1.5.0/docs/api/" (JDialog | How to Make Dialogs | The DialogDemo Example), it is not being painted correctly.
I have a dual monitor setup. The display adapter is an NVIDIA GeForce FX5200. Is this a Windows 7 issue, or is something going wrong with my display adapter?
Thanks very much.

In short, components are not being painted fully or at all. If I mouse over the dialog (which I'm guessing forces a repaint), sometimes a given component will appear. In any case, it's not subtle. You would definitely notice it if it were occurring.
Thanks for having a look though. I guess I will try re-installing the JRE or research possible issues with my video card.

Issues with Facebook; Chat window problems; can't minimize window , and send chat as message when one receiver logs off.

While using Firefox I have an 2 issues with Facebook chat. 1. Cannot minimize (-) the chat window, only close it (x). When the receiver in chat logs off and a message didn't go through- the option to "send message as email" doesn't work. These have been ongoing problems for several months. I don't have these issues when I use Safari.
== URL of affected sites ==
http://www.facebook.com

i have the same problem but on chrome and dat 2 after i installed facemood application

File association with JWS and windows

Hi,
We are moving all our applications over to JWS from install anywhere. One final hurdle we have is the requirement to associate a file extension with a given JWS application.
e.g a double clicking a .foo file will launch JWS application MYJWSFooApp.
As install anywhere defines the install directory and exe file this is possible. Has anyone managed it with JWS ?
Thanks
Chris

Yes - you can do so with the new association feature in Java Web Start 1.5
Basically you specific the file ext and/or mime-type that you want to associate with in the jnlp file; and when javawebstart launch the application, it will prompt you to see if you want to create the association.
Refer to the JNLP spec changes in Java Web Start 1.5 for more details:
http://jcp.org/aboutJava/communityprocess/maintenance/jsr056/jnlp_spec.html#4756982
You can download J2SE 1.5-beta (which includes javawebstart) now and give it a try!
http://java.sun.com/j2se/1.5.0/

Unmovable file issue with partitions in Windows 7

Similar Messages

Maybe you are looking for