Unnable to capture anything. It records only blank files

When i open the capture window, i can watch the tape and control the camera. When i press "record" it starts recording, but the remaining disk space -meter does not decrease, but the minutes recorded -meter is counting. When i stop the recording process, nothing happens. If i browse the harddrive, i find the video files, but they only use 140-150kb, and is of corse useless. I tried to record using another program (DVapp) and this works.
. I also often get a pink bar on either the left or right side of the preveiw.
The camera has worked before on Premiere 6.5 on Windows 2000 and XP
I added the FireWire-card after i installed Premiere, but i re-installed premiere afterwards.
This is my new computer with the issues:
Windows Vista Ultimate 64bit
2x Samsung SpinPoint 250GB 7200 SATA
1x Western Digital 750GB 7200 SATA (This holds the "recordings")
Intel Core2Quad Q6600 4 x 2.4GHz x64
6GB RAM DualChanel
Nvidia GeForce 9800GT
The Windows Experience Index is 5.7
The Camera is a Panasonic NV-DS5

I think that you answered this, but to clarify, with the newly added IEEE-1394 card, DVapp does Capture fine. Is that correct, or did you add the card after you tried the other Capture application?
There was a recent thread, where all of the Captured files were listed as 0KB. Do not recall if it was in this sub-forum, or not. If I can find that, I'll get you a link. Do not recall if there was resolution, or not. Might be similar enough to provide some help, or maybe moot.
Good luck,
Hunt
[Edit] No Matrox, or BlackMagic, etc. cards, right?

Similar Messages

  • HDR-CX405 How to stop dual recording, only mp4 file needed.

    Hello Sony, Yesterday i purchased HDR-CX405. My question is, how to stop dual recording? Only mp4 file needed. Both file created on memory card while shooing video scene - AVCHD and mp4. I don't want AVCHD (too big file), just want mp4 file only.

    Hi mkpi49,
    Welcome to the Sony Community!
    I would just like to confirm the answer VideoGeek posted. The camera can only record in Mp4 when it's set to Dual Rec. Both an AVCHD and Mp4 file will be created and written on your card. We would also suggest recording in AVCHD and later converting the file to Mp4 using the PlayMemories Home software. 
    For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch

  • PO Price - Non Editable {capture from Info record only}

    Hi Experts,
    My client want - PO Price always populated via info record & its in non editable mode.
    What the config required to achieve it.
    Please guide.
    Regards,
    Jackie

    Hi Piyush & Seesen,
    Thanks for your reply.
    Now system doesn't allow user to maintain price manually in PO, it captures it from Info record. But still  i am able to modify inforecord price.
    How can i grey out PO Price {non editable mode in PO}
    Please suggest.
    Regards,
    Jackie

  • I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    I'm trying to record only part of my screen using my Quicktime 10.0, but once I press record in the "Screen recording" feature it automatically starts recording and doesn't give me the option to choose what part of the screen to capture. What gives?

    QuickTime version 10 can only record the entire screen.
    10.1, 10.2 and 10.3 offer part of the screen recording.

  • I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them to upload to youtube but it won't let me import them.

    I'm using ezcap.tv 116 ezgamer capture card to record my PS3, this is on a windows laptop, Im then moving the recorded videos in mpg format over to my MacBook Pro to use IMovie to edit them so i can upload them to youtube but it won't let me import them, even after changeing them to MP4 format, it just comes up with the message: "No Importable Files None of the selected files or folders can be imported. Change the selection and try again."
    Ive even tried opening in itunes and copying from thier but they wont open in Itunes, no message or anything they simple just dont open. its strange because it does open in quicktime player.
    please if anyone has any ideas that can help me please let me know XD thanks.

    First problem: You're fine. The hotter it gets, the more the fans spin up. The computer is designed so that at max load, at max fan speed, it won't overheat (unless it's obstructed by something, e.g. sitting on your bed swallowed by a comforter). It's not the best thing to keep it that toasty for days at a time, but a couple hours at a time shouldn't be a problem.
    Second problem: If something in the trash won't delete, just use Secure Empty Trash and it should be fine. Since .torrent files are quite small, it should only take a couple seconds.

  • Getting only Blank Values in Crystal Reports

    Hello Experts,
    I have crystal Reports on top of R/3. I am using table called EKKO, When I dragged the LIFNR (Vendor Number) in the report, It's bringing only blank values, I checked in SAP and it has 7000 records.
    For testing I created report with only this EKKO table, but the same thing, it's bringing only 91(Blank) records, I don't have any conditions or anything in my report.
    We are using Business Objects XI3.1, Crystal Reports 2008.
    Could anyone please help me?
    Thanks
    Ravi

    Yes, I created crystal report with only EKKO table. I haven't used any conditions or any parameter, I just dragged LIFNR (vendor Number) in the report and I see only blank values. When I checked in SAP, I have around 8000 records out of 91 records are blank values. So It is bringing only blank values.
    Thanks,
    Ravi

  • Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

    Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
    We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

    Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
    I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

  • MY PIXMA iP4000 not printing--paper feeds and steps through but only blank pages

    The printer sounds like it is printing----you can hear the print head moving---but nothing prints....
    pages are completely blank. Reseated the connections, no effect. Took out all the cartridges, reseated
    them, no effect. Still only prints blank pages. Connected it to another computer, same---only blank
    pages...nothing, not even a test page or nozzle page will print. Any ideas? Was working fine
    on Monday when I went out of town until Friday. When I tried to print on Saturday morning, only
    blanks pages. Just spent a small fortune on ink for the printer and would hate to trash the
    printer, but can't justify spending more than the price of a new one to have the old one fixed.
    PS The printer is connected to my USB port, as it was for the past several years when it worked
    fine. Totally stumped/

    Thanks, Michael, however, I was on the phone with Canon for some time, and could not get the printer to do anything even off line. Was told the iP4000 is over 8 years old and there are no parts available to repair it.
    So I have already replaced the printer with an iP2702 that was on sale at a nearby
    mass merchandise store. I was intending to replace the iP4000 eventually anyway, as the red was
    not printing as vividly as it once did...more like a purple. Thought at first it was because I was using
    3rd party ink, but even after replacing the magenta cartridge with "genuine Canon", the red was still
    not as vivid as when it was new.
    Unfortunately,as you know,  the iP2702  got uses a more expensive combined color cartrdige
    rather than the separate ones in the iP4000.
    I am suspecting the reported failure of my iP4000 to print may be due to the third party cartridges
    which I was told do not contain a "chip" as do Canon cartrdiges and that may signal to the printer
     to suppress printing.
    Strange, as I have been using 3rd party cartridges for some time prevbiously without any problem.  
    H. Singer

  • How do I record only a select portion of the screen?

    I can't seem to figure out how to record only a select portion of the screen.

    QuickTime X screen recording feature doesn't offer anything except the entire display.

  • Unable to see photos in iphoto only  blank boxes where the photo's should be

    can anyone help , usually use the external drive to manage iphoto, for some reason now when i click on iphoto, only blank boxes appear and even when i eject the hard drive and open iphoto it thinks it has found the library with blank boxes . ???

    Remember we can't see your machine.
    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.

  • How to disable FMR capture and use Screenshots only?

    I'm using Captivate 7.0.0.118 to record a video demonstration.  I currently use recording type "Automatic" and mode "Demo".  The resulting project has some slides containing screenshots and some slides containing full motion recordings (FMR) for instance when I drag the mouse across the screen.
    I need to reduce the project size, and I have already done what I can from the SWF Size settings as well as the Audio quality settings. I would like to eliminate all FMR captures and instead rely only on screenshots. I envision narrating the demonstration and pressing the Print Screen key whenever I want a screenshot. I would expect the resulting SWF to be much smaller.
    Problem is that I have been unable to find out which settings will disable FMR capture. I tried setting recording type to "Manual" but that did not work.  Is it possible to turn off FMR and rely on screenshots only?
    Please help,
    -Patrick

    Lilybiri
    I'm not familiar with the HD Video Demo slides.  Do you know whether that option is available in CP7? Is it different from a video demonstration recording? By that I mean that when I select "record" from the project film strip, the dialog box that opens up gives me a choice of 3 recording types: "Automatic", "Video Demo" and "Manual".  Is this "Video Demo" recording type what you're referring to when you mensiton "HD Video Demo" slides?
    Captiv8r,
    I will look into TechSmith Camtasia Studio.  You didn't specify why you thought it was a better option.  You mentioned that the recording is about the same.  I currently don't need to do much post-recording editing because each project is a 2 to 4 minute recording of a solution to a math problem.  The way it usually works is that I talk and solve as I record.  If I make a mistake, I start the recording over in a new take.  Does Camtasia Studio produce SWF files?

  • Recording ONLY new episodes of a series is not allowed!

    I recently upgraded to quantum. Now when I try to record a new season of a TV series I am not allowed to record just the first run (new episodes).....I am forced to,record the new episodes and ALL or the reruns. I just spent 40 minutes on the phone the the fios people and they say that is all they have. I said so you charge me more & give me fewer option. Furthermore the DVR recording options are redundant..."record episode" is fine, then there's "record series" and you get the new & old episodes and there's "record series with options" and you get the new and the old episodes...THERE ARE NO OPTIONS!!! This is stupid! The other nonsensical part of this is the shows I already had saved to record on my old equipment migrated to the new equipment and those still record just the new episodes.....so why can't I create a new recording and record only new episodes?????

    Nedsma wrote:
    TNS_2 - I beg you to come to my house so I can show you the option is not there. I have not had the option to record first run only ever since I got the new quantum equipment. Furthermore, the Verizon tech support person and her supervisor TOLD me there was no option to record only the new episodes, hence NONSENSE! Please get Verizon to correct this!!! 
    I have Quantum, and I most definitely have the option to record only first-run episodes. However, that option is not available when I first schedule a series, I have to go in and modify the series.
    I think maybe you are failing to scroll down on your options. I have a number of series recordings scheduled, I can easily go in and change the recording option on any of them:
    Scheduled Recordings ==> series I want to modify/OK ==> scroll down to Modify Series/OK ==> scroll up to Episodes/OK ==> select First-Run Only/OK == Save
    Unfortunately the reps you talk to on the phone know very little, I have had FiOS now for 10 years, Quantum for one full year, and I have found I generally know far more about how FiOS works than pretty much any of the reps you might talk to.
    And last, none of us here can get Verizon to do anything, we are all just other customers trying to help.
    Good luck.
    Justin
    FiOS TV: Extreme HD, Internet: 50/50, Digital Voice
    VMS Enhanced Service: 1 server, 2 clients
    Keller, TX 76248 (VHO 1)

  • [svn:fx-trunk] 14166: Record-only merge of revision 14165 from 4.0. 0 to trunk.

    Revision: 14166
    Revision: 14166
    Author:   [email protected]
    Date:     2010-02-13 09:17:45 -0800 (Sat, 13 Feb 2010)
    Log Message:
    Record-only merge of revision 14165 from 4.0.0 to trunk.
    Update flex-fontkit.jar with P4 build 270762
    QE notes: N/A
    Doc notes: N/A
    Bugs: SDK-25392
    Reviewer: N/A
    Tests run: checkintests
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-25392
    Property Changed:
        flex/sdk/trunk/
        flex/sdk/trunk/frameworks/

    Camuzo, please go to the forum and just un-subscribe yourself.
    each of your emails is getting sent to everyone who does want to use this forum
    just sending messages is not going to do anything.
    GO to this url:
    http://forums.adobe.com/community/opensource/flexsdk
    and simply tell your account not to be emailed.
    But, please kindly stop just sending us all your messages.

  • Display current month records only

    Hi Experts,
    I have the following requirement.
    Report should display current month records only.
    For example If the report is run on 20090324, It should display records from 20090301 to 20090324.
    That means,  report may run on any date of that month, It should display from 01 (of that month) to current date.
    I have a select statement saying
      SELECT * FROM likp
      WHERE wadat_ist BETWEEN month_start_date AND sy-datum          
        AND vkorg IN s_vkorg
        AND vkbur IN s_vkbur
        AND kunnr IN s_kunnr.
    How to calculate date for month_start_date, so that it can display only current month records.
    Thanks in advance
    Rohan

    Hi Kunta, Suhas, Nandi,
    Thank you for your quick reply, I really appreciate it.
    for this current month records, I need to display a check box saying
    Open orders  and shipments with the current month.
    But where as Selection text is accepting 32 characters only. Is there any possibility to overcome this?
    Thanks in advance
    Rohan

  • My HP LaserJet 1018 has started printing only blank pages.

    My HP LaserJet 1018 has started printing only blank pages. 
    Help?
    Using Windows XP (Home Version)
    Product # CB419A

    Could be a number of issues.  First could be a bad or not connecting transfer rollers which moves the toner from the drum to the paper.  Only way to test is a half test by putting paper on the manual tray and printing a self test.  When the back edge enters the printer, open the toner door to stop printing.  Remove the toner and flip back the cover over the toner drum to see if there is any image on the drum.  If image is present then it could be transfer roller issues.  Use the service manual and look under engine diagnostics in the index and it will direct you to a page that shows how to perform an engine test.  Do the test to see if you get a sheet of paper with lines on it.  If you get lines, then the issue could be the formatter.  If no lines and the shutter has been removed then I would think you are having high voltage issues.  You may have to bring the printer in for service.

Maybe you are looking for