Unnable to connect with crio via project explorer

Hello
I'm having problems connecting the CRIO-9073 via the project explorer.
I can see my crio in my project, but when I try to connect, it deploys for 5 seconds, then I get the message 'failed to connect to target'.
I can connect the crio within NI MAX, I configured the network settings with static IP.
I can also ping the crio via the command prompt, I have labview realtime module installed.
I also did a disk format on the crio and reinstalled all the software on the crio.
Do I need other software? Or anybody other ideas. 
In the attachements you can find the error message and the list of software installed on my host pc and crio.
Thanks!
 

thank you for fast answer
Yes checked the whole list of software to install on the crio.
As i'm not sure with software I need on the crio I didn't remove any software (I'm new to labview).
I first added it 'automaticly' , but also tried it by adding it manually and enter the IP.
Both didn't work and gave me the same error message.
Yes Im connecting with the explorer while MAX is open and connected with the CRIO

Similar Messages

  • My ipad doesnot connect with Xperia via bluetooth, My ipad doesnot connect with Xperia via bluetooth

    My ipad doesnot connect with Xperia via bluetooth, My ipad doesnot connect with Xperia via bluetooth

    You cannot link to another smartphone via Bluetooth from your iPad except perhaps to use the Xperia's personal hotspot (WiFi is supported, but I'm not sure about Bluetooth). If you wish to transfer files or data, that's not possible.
    Regards.

  • Airport express connect with Imac via lan line or can not?

    I using IMac with connect to internet with DSL modem router (having 4 lan ports).
    Now I put Airport express connect with one of Lan ports from DSL router and still connect my IMac with DSL router via lan line and still connect to internet via lan line (switch off airport function in Imac).
    The Airport express is using for provide wireless internet and printer to my other PC.
    My Question is can I still set up as above and connect share file to my PC via airport express?
    Forget to tell that I'm very newby to mac.

    chounws, Welcome to the discussion area!
    Yes you can do that. Configure the AirPort Express (AX) to operate in bridge mode (not sharing a single IP address).

  • Connect with sapgui via VPN

    Our Production system is turning on a windows 2003 server cluster.
    Now I have a problem to connect to it via Checkpoint VPN secureclient. The strange thing is that the connection to our other systems DEV and QAS are working fine.
    Does somebody knows how to resolve this problem. Can it be the MScluster?

    Hi Jimmy,
    The service file Gregor and I where referring to is the service file on your local workstation (PC), not the service file on the servers of your MS-Cluster.
    But however a service file does exist on the MS-cluster servers too and they have to be equal on both servers and contain also the entries I was referring to.
    Seen technical a MS-Cluster (with 2 machines) have at last 7 IP addresses.
    One IP for every physical machine, one for every network-card installed in the machines, and one for the cluster itself. But the important is that you on top of this have one IP for the logical name of the DB-server, and one for the logical name the SAP-system.
    To balance load on the machines you properly let the database run on one machine and the SAP system on the other machine. The meaning of the MS-Cluster however is that it, seen from the outside, is not important on witch physical machine the SAP system or DB is running, because they are addressed by the logical name or IP of the SAP system (or DB) and then the Cluster itself handles the rest.
    The point is that you from the outside never will address a physical name or IP of the cluster. You will always address the logical name or IP of the SAP system.
    That’s the name or IP you connect to from your SAP-GUI. And it is this name or IP that has to be open in the firewall, and at my best opinion you should be able to "ping" this name or IP through your VPN connection and of course the ports the SAP-system is using have to be opened as well.
    Hope you can solve your problem
    Regards,
    Rolf
    PS.: Maybe you can find some other helpful information in this forum discussing the "SAP GUI sapdp00 error" ( SAP GUI 'sapdp00' error )

  • Methods to detect loss of connection with CRIO

    I am developing an application with CRIO. The CRIO has an application in real time in which you are sharing a variable temperature. In my host PC I have an application that will receive this temperature and stored in a database. I need to detect the beginning of my program if present the CRIO and prompting a loss of connection and the system can not initialize.

      This is the cRIO code.  All it does is continuously update a variable that can be read by the HMI.  It is important that this loop runs faster than the HMI loop to prevent false alarms.
      The HMI code may look something like this.  It is reading the variable being written to by the cRIO.  If it does not change, the communication code is not running.  You would probably want to do something if Comm's Lost goes true other than turn on an indicator.
    There are many ways to do this and you may receive some better ideas from the forum.

  • HT3728 every time my iMac sleeps or restarts it loses the connection to airport express and i must reset and connect with router via ethernet cable.

    Every time my imac sleeps or restarts it loses the wireless connection with my airport express (used for streaming music). I then have to disconnect the airport express from my stereo, bring it to my router, connect it to my router with ethernet cable and reset the wireless connection. Even with my airport express  in the same room as my router Airport Utility cannot find it until i plug in an ethernet cable, so i do not think this is an issue with my wireless network. Router is a newer netgear.

    Hi there frustrated newbie 2014,
    You may find the troubleshooting steps in the article below helpful.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W. 

  • Can't connect with gftp via ssh

    Hello,
    I installed openssh on a computer and configured my accsess to it...
    I can access it with scp,ssh,sftp from command line with no problem by entering my passphrase and everything runs smoothly...
    I want to be able to use gftp to access the files in it, it's a bit more comftarble for me then the command line.
    when I try to connect I give gftp the Host, port user and in pass I tried both the user's password and the passphrase and each time I get this reply :
    "There was an error initializing a SSH connection with the remote server. The error message from the remote server follows:
    ssh_askpass: exec(/usr/lib/ssh/ssh-askpass): No such file or directory"
    does anyone knows how to solve this problem?
    Thank you,
    Grey

    Pinging is fine. How would I check the firewalls?
    I also noticed this message in the system log:
    /usr/libexec/sshd-keygen-wrapper: getnameinfo() only supports IPv4/IPv6. Connection from address family: 5

  • PI ( old version called XI ) connectivity with ABAP via Proxy

    Hi
    Could any body please share with me the sample code for
    connectivity  of  PI ( old version called XI )  and ABAP  via Proxy for Outbound interface.
    points will be rewarded for sure
    Thanks & Regards
    Meeta

    The prerequisites to configure ABAP Proxy include: (landscape dependent) 
    The business systems should be based on SAP Web AS 6.20 and SAP Web AS 6.20 kernel patch level above 1253
    You have installed the XI Add-On in each of these business systems as described in the Installation Guide SAP Exchange Infrastructure 3.0
    The business systems and your central Integration Server are maintained in the System Landscape Directory (SLD).
    Configuration required on the Business System:
    1.       Create a HTTP connection in the business system using transaction SM59
    Technical Setting:
    ·         Connection Type: H
    ·         Target Host: System name
    ·         Service Number: HTTP Port name
    ·         Path Prefix: /sap/XI/engine/?type=entry
    Logon Security
    On the Logon/Security tab page, enter the following logon data:
    ·         User: XIAPPLUSER (for example); this user should represent the sending business system (see also the SAP XI Security Guide under Service Users for Message Exchange).
    ·         Password: the password you have specified for this user
    ·         Client: SAP XI Integration server
    ·         Language: Language required 
    2.       Configuration Business system as local Integration Engine.
    1.       Go to Transaction SXMB_ADM
    2.       Choose Edit --> Change Global Configuration Data.
    3.       Select Role of Business System: Application system
    4.       Corresponding Integration server: dest:// XI_XIR_CONNECTION created in step 1. Dest://XI_XIR_CONNECTION.
    5.       Under Specific Configuration Data you can specify additional configuration data
    Select the relevant category under Specific Configuration Data.
    Choose Change Specific Configuration Data.
    For ABAP Proxies, Add the following configuration:
    1.Category RUNTIME
    2.Parameters: IS_URL
    3.Current Value: dest://XI_XIR_CONNECTION

  • Internet connection with Notebook via iPhone 3 Hotspot

    Connection is only available via Bluetooth or cable with iPhone 3. Windows cannot find a driver for Bluetooth connection.
    Where can I download such a driver?
    Many thanks and kind regards
    Marianne

    AT&T has this one > myAT&T for iPhone, iPod touch, and iPad on the iTunes App Store

  • Sharing internet connection with Windows via Airport

    Happy New Year, all!
    I have an iMac Intel Core Duo connected to an ADSL modem via ethernet. I'd like to share my internet connection via Airport with a Windows laptop (which is running XP with SP2). I've read that this is possible and I've tried setting it up but the laptop isn't seeing the Airport network at all.
    I've created a network with security off, from the Airport drop-down menu in the iMac menu bar, turned Internet Sharing on (Share from: ethernet - to computers using: Airport). I have Windows Sharing and Personal Web Sharing turned on, and my firewall is off. But the Airport network still doesn't show up on the laptop.
    Can anyone tell me what I'm doing wrong, or at least point me in the right direction.
    Many thanks in advance.

    i am having the same problem. i have the mac connected but when i go to windows i can't get the page open that says to connect. when i run the mouse over the icons at the bottom of the page it shows the airport signal being excellent. but i just can't get to a page to enter the "key to connect". it is greyed out and shows that it is limited or not connectivity.
    please someone help!
    movie lady

  • Nokia 6600 connection with pc via serial port

    Hello friends
    I want to connection my nokia 6600 via the serial port, or infrared, to a pc. How can I do this? I have made a test with the CommConnection Interface, but it doesn�t work, it gives a port not found exception. Who can help me?
    Thanks tritonman

    Thanks a lot, but you now a phone which supported the completely CommConnection Interface to communicated with a pc over the serial port?
    Thanks tritonman

  • Samsung s8300 connecting with Macbook via Bluetooth

    I just bought a new s8300. For some reason, the camera photos I take cannot be sent to my macbook via bluetooth. Does anyone know why?

    No. I have a Samsung G600 phone. I have now been into the apple shop and tried connecting to the laptops there which was fine so oit would seem to be something wrong with mine and not the phone

  • 8520 will connect with internet via wifi but won't receive or send emails

    have recently changed my carrier/service provider and all is set up to recieve texts, use the internet (default setting to hotspot) but now won't let me send or receive emails. I've gone to email set up in setup and tried to re-establish my email link but it keeps saying 'your device had a problem connecting to the server' - how can this be when it connects to tthe server for normal internet use?
    Any ideas gratefully recieved.
    thanks
    O 

    On your BlackBerry device, go to:
    1. Options > Advanced > Host Routing Table > Menu > Register.
    2. Resend your service books from your carrier BIS site:
    From your handheld device:   http://www.blackberry.com/btsc/KB15402
    Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
    From your desktop PC:  http://www.blackberry.com/btsc/KB02830
    North American Carriers - scroll down to select your carrier
    WorldWide Carriers - Find your carrier on the list
    3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with sharing internet connecting with Wii via AirPort

    I have an iMac running the latest updates of 10.0.4. My internet is DSL, so it comes into the modem via the phone, and then the modem connects to the iMac via an Ethernet cable. ie: I don't have a wireless network.
    I just bought a Wii and want to connect it to the internet using the built in AirPort feature of the iMac. After I turn on Internet Sharing in Sharing, the Wii will find the iMac as an Access Point (that's the term in the Wii menu).
    The problem I have is that the Wii will not connect to the internet unless I turn off the firewall in OS X. Obviously, this isn't a great solution to getting the Wii connected.
    Does anyone have any idea of how to allow the Wii through the firewall without turning off the firewall.
    Thanks.

    Though this link talks about blocking them, you should be able to reverse it...
    http://www.ist.uwaterloo.ca/security/howto/2007-07-31/
    In the Firewalltab>Advanced, is UDP being blocked? You can also open specific ports.

  • Connecting with iphone via bluetooth

    Can I connect my iphone to my ipad 2 using bluetooth?  It seems like it should work but have not figured it out. thanks.

    Other than to tether the iPad to the iPhone to use the iPhone's 3G connection (assuming an iPhone 4 or 4S and an appropriate plan from your cell provider), connecting the two devices together is not supported natively. If you want to do file transfer, there are apps in the iTunes Store that purport to allow this in limited fashion, though I've not tried any. Search the iTunes Store for "bluetooth" and you may find something that would work for you.
    Regards.

Maybe you are looking for