Unnecessary black lines being printed in the printed document

I have an year old HP M1136 Laser jet printer ( Serial No. - CND8B9QJ65 ) and use orignal HP cartridges.
And I use Windows 7 ultimate (32-bit) as my operating system.
I guess, The problem isn't regarding the software. It might have something to do with hardware.
The issue is whenever I give the print command to printer, it prints the document as it is but also adds a bunch of blurred black lines on the left side of the printed A4 sheet. This thing ruins the whole look of the document.
Nothing like this happens when Scan command is given. Its only when the printer receives a Print or Photocopy command.
This problem started appearing in the month of February. At the start I adjusted but now the problem has got bigger. Please help.
An earliest response in this reagrd would be highly grateful.

Hello Shubham22,
First, let me welcome you to the HP Consumer Printer Forums.
I am not sure what would cause the issue you are experiencing. Check out the following link for possible troubleshooting you can try:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02003606&tmp_task=solveCategory&cc=us&dlc=en&la...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

Do i need to use the phone line that came with the printer to fax paperwork or can I buy a new one?

This question was solved.
View Solution.

Hi Willcarter,
It is all up to you. You can use the phone line which came with the printer or you can get a new one. It does need to be a 2-wire phone line though.
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to report print to the printer immediately and display the popup?

Dear friends,
I am running my report in background and displaying the confirm results on popup window and sending the results to printer,
but now i want to send the results page to printer then want to display the popup.
i have writen my popup perform after printer perform only but its not working...when i am clossing the popup or came back from that popup then only the results sending to printer...
How to report print to the printer immediately and display the popup?
Thanks in advance
Sridhar

Hi Sudheer,
I am using my print parameters like this :
    NEW-PAGE PRINT ON DESTINATION ws_printer
                         IMMEDIATELY 'X'
                         KEEP IN SPOOL 'X'
                         NEW LIST IDENTIFICATION 'X'
                         SAP COVER PAGE 'X'
                         ARCHIVE MODE '1'
                         LINE-COUNT 64
                         LINE-SIZE 170
                         NEW-SECTION
                         NO DIALOG.
Then also its not printing immediatly.
here one thing for displaying the popup i am using submit report(calling another report for popup purpose)
before trigering the submit programe i need to print this.
Thanks
Sridhar.

HT4356 my iPad will not print to my AirPrint printer. The print center shows the printer but it continually says "waiting"

My iPad will not print to my HP AirPrint printer. The print center shows the printer and the print job but the print center continually shows it is "waiting"

This article states that if your printer is not listed you can't airprint from your idevice but I have printed from my Ipad to my HP Officejet Pro 8600 in the past but now, all of sudden, I no longer can't. I'm trying to print from the "note" app but every time I try to print it keeps sending to my printer but never prints. Constantly buffering and sending, that's all it does. My color ink levels are all low but I have plenty of black ink left. EXTREMELY FRUSTRATED WITH APPLE AND HP!!!!

How can I print ONLY the active document?

Whenever I go to File/Print the darn PSE 9 program sends all of the working files in the bin to the printer. I've searched online for 2 hours now looking for an answer.
I like to work with having several to many files in the 'bin' and prefer to only print the active file I'm currently working on without having to close the 'working files' before I can print. How can I print ONLY the active document or file in the project bin? Please help, I've upgraded from PSE 3 to PSE 9 and really like the updated features, but this one pain in the neck default is getting the best of me.

Thanks for your help, that works nicely. It is good to have control of the printer again.

My ipad2 cannot find my HP A3050 j661b airprint printer although the printer is connected with the same wifi network.Software updates are current on all and my other labtops also work properly with this printer in the same network.Further more it used to

My Ipad 2 cant find my HP3050A j661b airprint printer although the printer is connected to the same wireless network and software updates are current on all and my other laptops also work properly with this printer.further more it used to work with my IPAD2 before when I used the old wireless router but now I changed it to HAUWEI HG231f but I set everything in the same way it was. Thanks in advance.

When you change to the new router, did you re-run the CD to re-set the new SSID and password to the printer.
Otherwise your iPad will not be able "talk" to your printer.

I have a HP Laserjet P1102w printer hooked up to the USB port of my Airport Extreme. I'm able to print to the printer wirelessly from my MacBook Pro. My iPad (2nd gen) can't find the printer. What do I need to do?

My iPad is on the same network as the Airport Extreme. The HP printer is on the list of Airprint printers but I'm not using it as a wireless printer, per se, as it's hooked up to the USB port on the Airport Extreme.
I installed the HP ePrint app on my iPad. Unfortunately, the app could not find the printer either.
As mentioned earlier, I'm able to print wirelessly to the HP printer via my MacBook Pro.

ApplePearApple wrote:
Since I'm able to print to the HP printer from my MacBook Pro using this configuration, shouldn't I be able to print to the printer from my iPad, especially when all of the devices are on/using the same network?
Not necessarily. AirPrint uses a protocol separate from the communication protocol used for the Extreme's USB port. The HP printer may disable AirPrint when its USB port connected to a valid device, which is my reason for recommending you use it wirelessly.
From AirPrint Basics:
AirPrint printers connected using Bluetooth or shared through a USB port of a Mac, PC, AirPort Base Station, or Time Capsule are not supported.
AirPrint printers connected by Ethernet are supported in OS X.
You may get more competent assistance from HP. See this HP support forum topic: iPhone & iPad can't Airprint to p1102w LaserJet
HP's Mac support has always been miserable though. I have been much happier since I abandoned HP and started buying Brother printers. They just work.

I have a e printer and thee printer is on the same wifi net work as the iPad, when I select print from the iPad the response is no printers. I can successfully email from my iPad to the printer. How can I make my iPad recognize the printer?

I have an e printer and the printer is on the same network as the iPad. When I attempt to print from the iPad I get a message no printers available. How can I get my iPad to recognize the e printer?

This printer has worked for me with out fail at my house. I am traveling in an RV and am at the mercy of the RV Wifi. I do not have access to the router. The printer has been recycled a number of times as well as the Ipad. The printer is set up and has access to the wifi. It seems to me that the Ipad and Iphone are not recognizing the connection with the e printer. I was hoping there was some adjustment that could be made to the Ipad and Iphone. I can email to the printer from both gadgets. I will try to recycle the devices again.

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

HT1338 I'm trying to follow HP's instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can't "add" the printer to the print queue because I don't have a driver and you have to se

I’m trying to follow HP’s instructions to add a driver for HP Color Laserjet CP 1215 which is connected to my Time Capsule. However, in System Preferences I can’t “add” the printer to the print queue because I don’t have a driver and you have to select a driver before the add button becomes active. Therefore, the Mountain Lion software update doesn’t add driver software for the CP 1215 driver because I was unable to add the printer to the print queue.

This printer doesn't seem to be supported in ML:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=412187#N2043
You could try the 1515 driver or use the Generic PostScript Printer PPD when adding the printer.
Hope this helps.

Problem with local users printing to the printer queue

We have just upgraded our servers to 2.8GHz Quad-core Intel Xeon which is running OS X 10.5.6
I have set up the printer queue to the network printers, through LPD.
Open directory users are able to print to the network printers without any problem however when a user local user to a machine (all 10.5.6 but different models) are not able to print.
The printer pauses and does not print.
Any solutions?

Hi there,
I am not quite sure of your setup based on your posting so apologies if my reply is not appropriate.
Are you saying that when the Mac attempts to print directly to the network printer (rather than via a queue created by selecting an Open Directory printer) the printer queue pauses?
If yes, then I would ensure that the LPD protocol was selected and the correct queue name was entered - as this can often cause the spooler to pause.
PaHu

I cannot get my Vista laptop to print to the printer on the base station

I cannot get my laptop windows pc to wirelessly print to the printer on the base station. the mac have no problem with it. but not the pc vista laptop or xp running on boot camp on my imac Leopard.
How do you make this happen?
It's an HP business Inkjet 1200 bubble jet printer, hooked to my EBS

Try resetting the printing system:
OS X Mavericks: Reset the printing system
Next try deleting the system and reinstall the printer..
BTW this is Mac Pro desktop forum

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

CS6 Photoshop: One newly-created PSD filewon't print because the print dialog box won't appear altho the file properties appear to be the same as other files that do print.

CS6 Photoshop: One newly-created PSD file won't print because the print dialog box won't appear after selecting File > Print. Then "Print" becomes grayed out. The file properties such as permissions, are the same as other PSD files that do print. This file also cannot be converted to Adobe PDF, which is not offered as choice under "Save as", whereas other can be. I've exited, reopened Photoshop, restarted computer, checked out other CS6 PSD files which do print, nothing changes. The 52 MB file has been flattened. OS is Windows 7. Thanks for any suggestions.

Sounds like the printer driver is having some problems.
Try holding the space bar down when you select Print (which makes the print dialog NOT load previously used settings).

Unnecessary black lines being printed in the printed document

Similar Messages

Maybe you are looking for