Unnecessary space around table in an iview

Dear all,
Ive a simple model with only one table.
After I compile the model and It is shown in a iView, the table is not centered inside the iView, instead, an unnecessary space is around the table (Right side and bottom), I mean, between the table and the limit of the iView there is a blank space which constrain the table to be at the center of the iView.
Any help would be ok!
Thanks in advance.
Cheers,
Andres.

wa,
The gaps around the sides are margins. The sizes of the margins are set in the Sheet Inspector. There are minimum margins, based upon what your printer driver has communicated to Numbers, where your printer is unable to print.
Your table will split and flow onto multiple pages whenever it encroaches upon the margins. You can prevent this by not making the rows and columns quite so large, and by eliminating any unneeded ones.
Jerry

Similar Messages

Space around Table in Numbers

I'm new to Numbers and need to print a table I have devised. But there is too much space around it. When I enlarge the columns and rows, it splits into 2 pages. How do I get rid of the large gaps around the sides?

wa,
The gaps around the sides are margins. The sizes of the margins are set in the Sheet Inspector. There are minimum margins, based upon what your printer driver has communicated to Numbers, where your printer is unable to print.
Your table will split and flow onto multiple pages whenever it encroaches upon the margins. You can prevent this by not making the rows and columns quite so large, and by eliminating any unneeded ones.
Jerry

How do I remove unnecessary rim/space around VC flex app in iview?

I have created small VC apps to be placed on our intranet; one for showing a small revenue chart, and one for a HR people search form. I need these to take up as little space as possible since they are to be placed in a thin page column (thin-wide-thin page layout).
Alas the apps are displayed with a 25 to 30 pixels wide rim below and to the right of the chart/form content. Together with the standard portal iview paddings this makes for far too much unnecessary space being used.
How do I get rid of this (if possible)?
Henning

hi,
have you tried removing the frame from the model components like the chart/form. Thast should save some space for you.
Regards,
Pranav

Page layout: How to remove free spaces around an iview?

Hi,
I have created a page layout template into the EP 6.0 and I want to remove each free space in the top, bottom, right and left, around from the area of an iview.
It's look like an edge.
I think this space is pattern of each iview, they have approximately 5 pixels from de principal area (content) of iview.
Someone can help me?
Regards,
Carolina.

Hi,
I think you have to set the 'Add Padding inside Tray' to <i>no</i> in the Properties of your iView.
It's in the <b>Appearance - Tray</b> category of the properties.
You will also find some other interesting Properties such as :
- Show Tray (the frame around the object with the name at the Top)
- Show Object in Tray (the name at the top)
- Tray type (the "look" of the frame around the object : 3 possible values : fill, plain, of transparent)
Hope it helps.
Don't forget to close your thread if solved (add reward points ...)

Removing White Space Around Header - from CSS?

What is causing the white space around the header and
above/below the top nav bar? There's also an extra white pixel
space between each of the buttons on the top nav bar.
See;
http://home.roadrunner.com/~phenline/products/prods_models_9_10_07.html
I've also attached the CSS stylesheet.
I thought it might be a valign tag but they are all in the
main text and are necessary to glue the 3 main sections just under
the top nav bar. I couldn't find any vspace or hspace options in
the code.
Because of the rollovers on the top blue horizontal nav bar,
I need the "class" option in each <td> tag. Otherwise, if I
put the class="navMain" option on the <tr> tag, then the
whole nav bar will show the rollover color. Or, I suppose I could
create 5 different CSS styles for each nav button ???
Any ideas? Thank you.

HI, for first you should to revrite tables to DIV, or you can
correct this with a CSS code for the table:
for example you shold to check the background color to the
same:
.x {
background-color: #3766c8;
for more example about Table CSS styling you can check a good
wizard:
http://www.somacon.com/p141.php
Titti
http://textures.z7server.com/

Spry Image Slideshow w/Filmstrip - Eliminating space around SS images?

Hello,
I can not locate the file/setting to eliminate all the space around the Slideshow images? In Design/Code view, the SS appears nicely positioned in the table, however when I publish the page, I've got a ton of wasted space below the SS?
How do I get the lower half of my page closer to the bottom of the SS?
Thanks in advance!
http://www.kansascitycrates.com/contact.html

Update: I was able to eliminate space below the SS by deleting the entire table and starting over.

What's the point of the grey space around an image?

I understand the point of the grey space around an image when viewing in 'Fit' mode, because the image may or may not fill up the viewing space depending upon its aspect ratio...
But when you zoom in to 1:1 mode, and you scroll around your picture, why is there still this large amount of grey space around your image? If I scroll to the end of my image, it should just stop scrolling, not scroll over the end of my image into this vast amount of unusable and unnecessary grey space!
It's just annoying that every time I happen to be scrolling around fast, I scroll over the edges of my image into this vast grey space & I just can't fathom the reason for its existence.
For a better picture of what I'm talking about, see here:
http://web.mac.com/rishisanyal/Lightroom/UnusableSpace.jpg
-Rishi

Actually, it makes perfect sense to scroll in this fashion. It means that every part of the image can occupy the sweet centre spot of your monitor, even with all the panels open.
Try it. Even that important corner area of the image can be centred on your monitor. Particularly important when performing some spotting along the edges.

Space around text in a box

I am following the instructions regarding margins but whilst having lots of space on the right it remains very tight on the left. It's supposed to make the same amount of space all around the text??
Any ideas?

In the text inspector insert a margin last tick in the window after the paragraph adjustments.
Even if you don't use bullets you can also do some adjusment under that tab as far as space around text in the window.
As much as possible control your text with the sliders space before paragraph space after line spacing rather than extra characters as it is a much cleaner formating and when you make changes you won't have to remove any of those extras.
I was a print designer in another life, but text formating is text formating no matter where it is.
Mireille

Template with php script, white space around background, locking layers

two questions for 2 sites:
1.) first site http://www.beckervanhoveln.com
I can't get my background to line up correctly; there is a giant white border around the whole thing. With the amount of extra space around the background on all sides, I think it may be an issue with the illustrator file I am importing, but I can't see any way to fix it there, either. All the margins that I can find to change relating to that background are set to 0. Any ideas on what could be causing this? The image in Illustrator is 14" wide, so it's plenty wide enough to cover the whole page.
2.) site http://sai.theclothesgallery.com
I inserted php scripts into a page (in the editable paragraph region) and it is messing up the alignment of the page. Compare what you get on the home page with what you get when you click the "client login" button. Also, wondering where the extra body area came from on page http://sai.theclothesgallery.com/protected_downloads_zdr/validuser.php.
On both sites I am using wrapper and body tags, as directed in the tutorial by Nate (great one, thanks!). On my old site, http://www.theclothesgallery.com, everything works fine, but on the new ones I am just out of my mind. I've spent 10 hours over the last 2 days doing research and trying to manipulate code, to no avail. Thanks to anyone who can help.
Finally, is there a way to lock a layer inside or on top of another layer. for example, the layer the body text is in on site http://sai.theclothesgallery.com is on top of the layer that holds the page's images (which is an imported illustrator file with slices). Is there a way to lock that layer to the first one so it doesn't move if I make changes?

Kelly,
1. The image itself has a white border. You will need to crop that image
in an image editor such as Photoshop.
2. Looking at the source of the page you have two sections and
two opening toags but only one closingtag. The PHP
script is probably creating the additional sections, but without seeing
the script it is impossible to say for certain.
2a. You probably have a space or blank line before the opening

How to modify default Space Around Component in NetBeans 6.0?

Hi,
Does anybody know how to modify the default Space Around Component in NetBeans 6.0? I use Panel and either they stick completely to the border or stand too far. I can't find any options to modify this in NetBeans 6.0. I have tried using the 'Space Around Component...' functionality, but as soon as I move an element, NetBeans automatically replaces the values I have entered with default values I am not interested in.
Does anyone have the solution?
Thanks!

I think you just have to move the component holding the alt key... that way you can put the components wherever you want to..... it was alt, or shift, or another special key, try it... i don�t remember right now

QR code occupying more space around the barcode

Hi,
I am creating a new form with 7 barcodes of type Paper forms Barcode(QR code). I have two problem in this...
1) I am giving the same width and height for all the barcodes. But in the final output the size differes for all. two are of one size, other two are of other size and other 3 are of different size.
2) And for the QR code it is taking more space around the barcode where the form is looking odd with more empty space?
So, How to make all the barcodes of same size?

Hi All,
Frequently we are facing the issue with memory dump files which will creating space issue on the drive...
Each dump file occupying around 100 or 200 MB and it will creating every 1 mint..
please let us know how to resolve the issue.
Thanks,
Subbu
Thanks, Subbu
Hello,
As per me memory dumps are generated when fatal error occurs.
How to avoid it ? See below
1. Please apply latest Service pack as well as cumulative update .If you still receive this dumps please open a case with Microsoft and allow them to analyze the dumps
2. Generally a SQL server not patched to latest SP or CU can cause this issue.
Hope this helps
Out of curiosity..can you post one of the dumps ,what is output of below query
select @@version
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Delete extra spaces in table column

hi how can i delete extra spaces in table column for example if table column value is store as 'ÄAAAAA ' how can i delete that extra space
this is the column i what to delete extra spaces
select SUBTYPES from tablesubtype;am in
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Edited by: adf0994 on 2012/12/03 11:30 AM
Edited by: adf0994 on 2012/12/03 11:42 AM

UPDATE tablesubtype
SET SUBTYPES = TRIM (SUBTYPES);Doing RTRIM alone will not suffice coz it'll only remove Right Spaces and NOT Left ones.
I guess, in your case doing a TRIM will be more beneficial to be safe and prevent any left spaces in future.
For intermediate spaces... try this.
UPDATE tablesubtype
SET SUBTYPES = REGEXP_REPLACE (SUBTYPES, ' ', '');Hope this Helps,
Ranit B.
Edited by: ranit B on Dec 3, 2012 2:33 PM
-- added regexp

Videos Come Out Small with Black Space Around-Nikon coolpix L820

Everytime I export a video from premiere pro it comes out small with black space around the edges-- like this: Above All Odds, Bobby Maze: Episode 1 - YouTube
How would you suggest I fix this within the settings and how I export it?

Hi,
What is the Frame size of the Video?
In the Project Bin, right click on the File and create a New Sequence from Clip.
Export the File in the same Frame size as you video.
Thank You
Arjun

White space around Videos

Hello,
I am embedding videos into an HTML page and they show up with
a big white space around the player. Is there a way I can get rid
of this white space so the videos are neatly contained in only the
space of the actual video and controls?
Thanks
Fiona

Can u show hoe you have embeded your code?
this may happen due to incorrect size. Please check the Flash
Width and height and your HTML tag

White space around graphic

Is there any way to get rid of the white space around an image. A lasso?

Do you mean the wide gutter? The default for all graphics inserted or dragged & dropped into a Pages document is 12 points. You can use the wrap inspector to either turn off the wrap or decrease the gutter?
If you want to make the background transparent, take a look at a recent thread starting here.

Unnecessary space around table in an iview

Similar Messages

Maybe you are looking for