Unoccupied positions with personal area

Experts,
Hope all doing well. I would like to assign personal area 1000 to unoccupied positions in the HR system.
We have a BW report which needs to pick up unoccupied positions where personla area is 1000, but our 0employee masterdata is not picking up personal area 1000 for unoccupied positions. only occupied positions have personal area attached . Hence our BW report is showing only occupied positions. How to get personal area (1000) for unoccupied positions as well.
Please advice. any advice greatly appreciated.
Thanks a lot.

Hi kiran,
I hope, you can use default position id 99999999 to extract unassigned position.
Good Luck
Om

Similar Messages

Table to find position's person area, description

Hi Experts,
I need to find the position's person area and the description,
For ex: for each position there will be person area maintained,I want to find all the person area's for a list of positions.
Can you please help me on this?
Thanks in advance for your help.

Hi,
Please go to HRP1008 table with OTYPE S OBJID ID of the position BEGDA LE SY_DATUM ENDDA GE SY-DATUM.
PERSA field will give you personnel area.
Then go to T500P table with PERSA field.
NAME1 field gives the description of the personnel area.
Regards,
Dilek

Creation of lsmw for updation of position and pers area

Hi friends,
I am tried many time to update position and personnel area through lsmw for all employees ,at time of recording its coming.But once compltion of lsmw preparation i am uploaded my inputs through tabfile that time its updating only personnel number and infotype and its asking the save the action screen (At the same time its showing one popup below screen like there is no recording for mp000000).Can you tell any one there whats the problem.At the same time is it possible to upload the position and personnel area through lsmw.
Thanks,
arjun.

Hi Arjun
Are you performing a hiring actions, if you are performing a hiring action, when you start with LSMW, the recording should be correct with hire date or start date, personnel number, reason for hire, position number, personal area, employee group and subgroup.
The source field you specific should contain the required field name, type, length and field discription. The field mapping should be done perfectly and assign the specified file in txt format and try to upload.
If you are facing any problem, let me know. I think I can help you
Regards
Santhosh.S

Regarding userexit for pa40 transaction for validating position and persona

when iam entering the position and personal area in pa40 transaction , this position is should matched with personal area of the pa13 screen,and that personal area should match with pa40 presoanl area, for this requiremetnt which userexit is suitable.
please any one worked on this type of requirement please help me on this.

k

Moving position, costcenter and personal area from one Org unit to other

Hi All,
I have requirment like one perticular PERNR i have one Org unit position costcenter and personal area. I wanted to move this PERNR position ,personal area and costcenter into new Org Unit.
I mean The PERNR Org unit needs to change with out changing the position personal area and costcenter.
Could any one tell me best way to do this.
Thanks for your replys.

Hello Ram,
I would use MM01 to extend the same material to Plant 2000/ Sales org A002. Could you let me know if this works for you?
Thanks,
Binu

Attendee List with Personnel area and position

Hi
Is there any report which gives the attendee list with personnel area and position. Tried to get it through adhoc query with set operationss. But the booked date is missing.
Thanks
Sreeja

You can change what is displayed using the layout once you have run the report. This is from the report documentation:
"You select the data you want displayed under Change layout.
When you choose this function, a dialog box appears with the columns that are displayed on the list screen in the left table, and the hidden columns in the right table.
The arrows let you determine what columns are displayed. To transfer the changed layout, choose Transfer.
To save the layout, choose Save layout. You can call this layout as required by choosing Choose layout."
We don't actually maintain attendees in our system, so I can't run the report. But hopefully if you change the layout you can get the additional fields that you want.
- April

1 position, 1 person, 2 chiefs

Hi everyone,
I need to know, how to add the following issue into OM: 1 position (1 person) with 2 chiefs in 2 differents organizational unit.
Thanks,
Ruben

Hi Ruben,
If it deleted the first O-P relationship when you created the second one, means the time constraint for that relationship is set to "1" or "2" meaning you can have a position related only to one organizational unit at a time. This can be changed, but it will affect all positions, so that they may be assigned to more than one organiational unit.
In the IMG: Personnel Management --> Organizational Management --> Basic Settings --> Data Model Enhancement --> Maintain Relationships. Select the 003 relationship and then the folder "Time Constraints" on the left side. Go down the list to the object type "S" appears and the A003 "Belongs to" relationship. On the right, the entry is probably "2". Change this to "3" and Save. This will now allow you to have a position belong to more than one org unit.
Again, this will now apply to all positions, so if you do a reorganization, for example, you must make sure the old relationships are delimited manually as they will not be done automatically as they would be if the time constraint remained "2". So I ask - is this what you really want? Does this person really report to two different chiefs in two different organizations? Or is one a "dotted line" or functional oversight relationship. After the change, this individual will now appear in each manager's organization and either one would be able to approve time, grant pay increases, approve vacations, etc.
It can be done. Are you sure it is necessary to do this?
Paul

Do the iPhone 4 give the gps position over personal hotspot to an iPad 2 wifi only?

Hello
I want to buy an iPad 2 wifi only.
I have already an iPhone 4.
Do the iPhone 4 give the gps position over personal hotspot to an iPad 2 wifi only?
So I don't need to buy a iPad 2 wifi+3G only for the GPS.
Thanks.

I have a WiFi only iPad1. I use a Verizon MIFI 2200 hotspot device that is about the size of a larger, thicker credit card. It easily fits into a shirt pocket. It does not connect to the iPad by any cable whatsoever. It is a free standing device. You can connect up to five devices at a time with the 2200. However, like any cell phone, 3G, wireless connection like this, in some areas the reception/connection is great - in other places - not so much. Sort of the anti - "can you hear me now?"

My emails from the same person are grouped together, how do I undo this so that each email stands on it's own?

1.My emails from the same person are grouped together, how do I undo this so that each email stands on it's own?
2.Currently my emails are grouped together if the subject is the same, how do I undo this?
3.My emails are "folded up", with tabs like "See more" - how do I undo this? - I want to see the full email at once without having to click multiple times in the email on "show more" etc.
4.When I send an email to some one, a copy of that email is sometimes sent to me?? - this confuses my and make me think I by accident sent it to myself, but when I check it in the SENT box, it the correct recipient's name was used. How to fix this mystery?
Please help, I am not good with computers so you will have to keep your answer simplictic or in steps.
Thanks!

Click the View menu in the Mail menu bar and uncheck Organize by Conversation.

WORK AREA - PERSONAL AREA

as I can download apps from app world and that can be used in the work area? I have a BES server if it's any reference.
I have applications in personal area I can not see in the work area.

Hello amunozbes10 and welcome to the BlackBerry Support Community Forums.
Thanks for your question about applications and the work partition.
With BlackBerry Balance, your Personal and Work partitions are separate. What this means, an application you download within the Personal partition will only be useable whilst in the Personal partition. When you are in the Work partition you will see the Work applications your IT Admin sets. Tousethe apps downloaded under your Personal partition, youwouldneedtoswap back to Personal.
Hope this helps to clarify your question.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How do I restrict PT60 Schema transaction to Personal Area?

I have tried to restrict it throgh personal area but no luck. Same with PPOME transaction even though the users have only restricted PA access but they are able to change Org structure.
I ran the trace and it shows that it checked P_ORGIN for specific Personal Area but then bypass that check and was able to update the change.
Please help!
Regards,
Zee

Hi,
(structural) authorizations for access to employees is correct, I assume
What you might do is add an addtional PCR to the time schema.
If the personnel area of the EE and time schema don't 'match' add an error so that further time evaluation fails.
Or am I missing your point?
Wilfred.

Save a copy of an open .ai file as a pdf file with personal preset

Hi all,
I am currently working on the schematics of a quite big document and I am using Illustrator. I work on the .ai version of the figures but I want to save them in a very quick way as pdf files with personal setting (super compression, no preview...). What I am doing now is that I have my .ai file open, and when I want to save a pdf version of it I go to "File" then "Save a copy" then "Type: pdf" and I enter a name, I click on "Save" and a window pops up with some options. Here, I select a personal preset and then click on "Save pdf" and I am happy with the final saved pdf. The thing is that it is a quite long process when you have to do it several times per figure. I tried to automatized it through a script (or action) but the available options are quite limited (it is hard to make Illustrator understand that if the current file is myfig.ai, I want a myfig.pdf and that I want to save it in the working folder). Under "File", I also tried the "SaveDocsAsPdf" script but once again, I have to select the folder where I want to save the figure and so on. Maybe I missed something. I'd be happy to hear that there is a very efficient way to save my figures as pdf by clicking a the F9 key (for instance).
Thank you for your help

I somehow found a technique that helps. It is kinda stupidly simple. Instead of working on the .ai file in Illustrator to finally save a pdf, I work this other way around. It goes much faster. I just have to hit ctrl+s to test how the created figure is included in the final document instead of all this very long process. When I am happy, I save an .ai version for further modifications later of necessary.

False Positives with GRC AC 5.2

Hi,
I actually have been working with GRC AC 5.2 (Compliance Calibrator) and we encountered several problems with false positives, working in the risk analysis.
¿do anyone knows how to solve this problem? ¿do you have documents or links to help?
Thanks,
Ricardo.

Thank you Alpesh for response.
In fact, i have several problem with false positives, but with transactional level. For example, i have a user with pfcg and su01 transaction. The configutation of profiles in SAP r/3 system do not allow to user involved in this, to execute both transactions in end-to-end process, i mean, the user have a transaction vía s_tcode object, have some other objects related with pfcg and su01 transactions, but he doesn´t have the values that allow to a transactions work properly. Then the Compliance Calibrator informs risks that it doesn´t exists.
It seems that is a ruleset configuration problem in the CC, then my question is, ¿the standard ruleset detects properly these problems?
Let my explain the reason that causes the problem.
We have been working with personalized ruleset, for customer-request. For that reason we look the usobt_c table and we form the ruleset-->functions in CC so that this functions were equal to usobt_c table. We did that because the standard ruleset shows false positives, such as first example of this post.
Thank you very much,
RCL.
Edited by: Ricardo Carrasco on Jun 18, 2009 11:58 PM

PO with personal number

Hi,
We need to issue PO in EB with G/L that must post with personal number.
Can anyone help me in this issue please?
Thanks!
//BR
Sreenivas.

Hi Jagadish,
For some of G/L Accounts, entering of the personal number is mandatory, which you can check in FS03 transaction.
Normally all the G/L accounts which are being used in posting PO have personal number field optional. The G/L accounts having mandatory personal number are only used in posting FI invoices.
But in my case I want to use the G/L account with mandatory personal number and trying to post GR, but it throws error saying "Please enter personal number". but we do not have any such option to enter Personal number in PO.
Please advice.
Best Regards
Sreenivas

Positioning with anchors

I want to know that if i am putting a anchor from a label to a frame, from where should i pull the anchor, it has to be from the edge of the bounding rectangle for the label and it cannot be from the center of the label. But when i run the report which has the anchor and the label as described above, the positining of the anchor with the label is getting distorted.
Please help in confirming my doubt that the anchor can be pulled only fron the edge of the bounding rectangle for the label.

Anchors maintain the relative position between objects. If you pull from the center of the label to the center of the frame then the label will move to always be in the center of the frame as the frame expands.
If you want to set the absolute position then, you are correct, you need to anchor to the appropriate edge of the object. You can bring up the property inspector agianst the anchor and set these values directly. Using the UI which may not give you the (0,0) values you may need.

Unoccupied positions with personal area

Similar Messages

Maybe you are looking for