Unordered list not behaving in DW CS4

Hi
I have created an unordered list for my Nav buttons, withing a Div. The div hight is sufficient to contain all the buttons (13) with some margin to spare.
When viewed in a browser all looks as you would expect. But strangely when viewed in the wisywig design window in DW the last three list items have popped out of the Div, causing the DIV next to it to drop out of line etc etc.
When i look at the code all the induviual items are held within the same list.
Is there a max item no for unordered list?
please advise
Many thanks
Mark

Hi Nancy
test page
http://www.hertsaerialsystems.com/test
also attatched a screenshot of dreamweaver.
many thanks
Mark

Similar Messages

  • Unordered list not printing correctly

    I created a heading 3 followed immediately by an unordered
    list. However, when I print the webpage out, I see the heading 3
    fine and then the 1st bullet appears where it should but the text
    for the first bullet begins several lines down the page. All the
    other bullets are thus pushed down as well but the spacing for the
    remaining bullets is fine. It's just that the text for the first
    bullet begins way down the page. Everything looks OK in the
    browser; just when printed is the problem.
    Here is the process I followed. Selected heading 3 on the
    property inspector and typed my heading. Then went to
    insert-->html-->text objects-->unordered list and began
    typing in the info for each bullet
    My code is below. Please help.
    <h3>Deposit Ticket Request</h3>
    <ul>
    <li>Deposit tickets will be paid for by Treasury
    Operations provided they are ordered through our department and not
    ordered as a RUSH</li>
    <li>If a RUSH is requested it will be the
    responsibility of the department to cover all charges for the
    deposit tickets</li>
    <li>Please allow 3-4 weeks for the deposit tickets to
    arrive once they are ordered</li>
    <li>Whenever a deposit is made, a deposit ticket MUST
    be included, regardless of the amount, or the type of
    deposit</li>
    <li>The deposit tickets will be either a two or three
    part ticket</li>
    </ul>

    .oO(Johnny the boy)
    >Thanks for the reply Micha
    >
    > It appears the problem occurs in I.E. but is just fine
    when printing in Firefox
    >
    > the site address to the page in question is
    >
    http://www.indiana.edu/~iutreas/test/forms/bankingdepositticketrequest.html
    It's most likely an IE issue with floats. I already get this
    effect in
    the normal browser view - the form is pushed down after the
    left-side
    "New Items" box. The print preview looks even worse as
    described.
    Actually I don't have a quick solution at hand. A while ago I
    had a
    similar problem on one of my sites, but can't remember what I
    did to
    solve it ... In many cases it's enough to simply apply a
    height: 1% or
    zoom: 1
    to the floated element to get the rendering right in IE. You
    just have
    to make sure that only IE sees these hacks. Conditional
    comments are
    really helpful for that.
    Micha

  • Unordered list not showing up as indented bullet points within Accordian

    http://www.foundationforyoutharts.org/test/Programs.html
    I have a page using the spry accordian, and about five different catagories of information. Some of the copy is in unordered lists (in martial arts catagories), but it shows up as as regular text. Any ideas on how to make it view as a typical unordered list with bullet points and indented?
    Thanks for taking time to look at this.

    Add a margin-left of 20px to your ul.
    Either added it in your stylesheet. or directly on the element:
    <ul style="margin-left:20px">

  • JTextPane ordered-list, unordered-list

    Hi
    I am using RTFEditorKit and want to implement " ordered-list, unordered-list " in a JTextPane. Does anyone has some solution to this?
    Thanx
    Hamza

    Start a new, blank HTML page. Put your lists on it. Are they
    behaving as
    expected? If so, and I suspect that it's so, then it's
    something else on
    your original page. Can we see it?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "synchronised" <[email protected]> wrote in
    message
    news:gmhvop$ghi$[email protected]..
    >I have endeavoured to use both the ordered and unordered
    list in CS4 and in
    > both cases it does not indent as expected. The bullet
    point or number is
    > left
    > hanging off the left of the page and the text lies right
    next to the
    > left-hand
    > margin.
    >
    > I have checked out the Preferences - Code Format and
    this is set up and
    > the
    > indent box is checked with 2 spaces.
    >
    > I have used this facility in the past and used a nested
    unordered list!
    >
    > Can anyone help with this problem or point me in a
    particular direction,
    > please?
    >
    > David
    >

  • Bc4j not behaving correctly when details are repeatedly added/removed

    Hi,
         I'm having problems creating a form with a master detail relationship. Seems like bc4j is not behaving correctly when details with the same keys are repeatedly added and removed.
         I've 3 entities maintenance order, maintenance and maintenance type with the relationships maintenance order 1:n maintenance n:1 maintenance type. My application module data model has one view for each of these entities and a view link between maintenance order and maintenance.
         In the maintenance order form, I can choose which maintenance types apply to a maintenance order by marking checkboxes. The struts action that saves the maintenance order, I remove/add maintenance records base on the selected/unselected checkboxes.
    Sequence of events:
    1) Open maintenance order - Maintenance order shown with all maintenances selected
    2) Uncheck all maintenances and save order - all maintenances removed from db
    3) Open maintenance order - Maintenance order shown with no maintenances selected as expected
    4) Check all maintenances and save order - all maintenances saved to db
    5) Open maintenance order - Maintenance order shown with all maintenances selected as expected
    6) Uncheck all maintenances and save order - NO maintenances removed from db
    7) Open maintenance order - Maintenance order shown with NO maintenances selected, even thought there are maintenances in the db
    8) Check all maintenances and save order - bc4j tried to insert new maintenance records in the db and an exception was raised due to unique constraint violation
    My environment is: Sun JDK 1.4.1_01, JDeveloper 9.0.3.4 (build 1247), testing with the embedded server
    Server log produced with jbo.debugoutput=console:
    [17] BC4J Property jbo.default.language='pt' -->(MetaObjectManager) from System Default
    [18] BC4J Property jbo.default.country='BR' -->(MetaObjectManager) from System Default
    [19] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
    [20] Skipping empty Property ConnectionMode from System Default
    [21] Skipping empty Property HostName from System Default
    [22] Skipping empty Property ConnectionPort from System Default
    [23] BC4J Property jbo.locking.mode='pessimistic' -->(MetaObjectManager) from System Default
    [24] Skipping empty Property ApplicationPath from System Default
    [25] BC4J Property AppModuleJndiName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule' -->(SessionImpl) from Client Environment
    [26] Skipping empty Property java.naming.security.principal from System Default
    [27] Skipping empty Property java.naming.security.credentials from System Default
    [28] Skipping empty Property jbo.user.principal from System Default
    [29] Skipping empty Property jbo.object.marshaller from System Default
    [30] BC4J Property jbo.use.pers.coll='false' -->(SessionImpl) from System Default
    [31] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
    [32] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
    [33] Skipping empty Property jbo.pcoll.mgr from System Default
    [34] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
    [35] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
    [36] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
    [37] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
    [38] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
    [39] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
    [40] Skipping empty Property JBODynamicObjectsPackage from System Default
    [41] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
    [42] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
    [43] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
    [44] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
    [45] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
    [46] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
    [47] Skipping empty Property HandleName from System Default
    [48] Skipping empty Property Factory-Substitution-List from System Default
    [49] BC4J Property jbo.project='Sinalizacao' -->(Configuration) from Client Environment
    [50] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
    [51] BC4J Property jbo.dofailover='true' -->(Configuration) from System Default
    [52] BC4J Property jbo.doconnectionpooling='false' -->(Configuration) from System Default
    [53] BC4J Property jbo.recyclethreshold='10' -->(Configuration) from System Default
    [54] BC4J Property jbo.ampool.dynamicjdbccredentials='true' -->(Configuration) from System Default
    [55] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
    [56] BC4J Property jbo.ampool.sessioncookiefactoryclass='oracle.jbo.http.HttpSessionCookieFactory' -->(Configuration) from Client Environment
    [57] BC4J Property jbo.ampool.connectionstrategyclass='oracle.jbo.common.ampool.DefaultConnectionStrategy' -->(Configuration) from System Default
    [58] BC4J Property jbo.ampool.maxpoolsize='2147483647' -->(Configuration) from System Default
    [59] BC4J Property jbo.ampool.initpoolsize='0' -->(Configuration) from System Default
    [60] BC4J Property jbo.ampool.monitorsleepinterval='600000' -->(Configuration) from System Default
    [61] BC4J Property jbo.ampool.minavailablesize='5' -->(Configuration) from System Default
    [62] BC4J Property jbo.ampool.maxavailablesize='25' -->(Configuration) from System Default
    [63] BC4J Property jbo.ampool.maxinactiveage='600000' -->(Configuration) from System Default
    [64] BC4J Property jbo.ampool.doampooling='true' -->(Configuration) from System Default
    [65] BC4J Property jbo.passivationstore='null' -->(MetaObjectManager) from System Default
    [66] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
    [67] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
    [68] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
    [69] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
    [70] BC4J Property jbo.maxpoolcookieage='-1' -->(Configuration) from System Default
    [71] BC4J Property PoolClassName='oracle.jbo.common.ampool.ApplicationPoolImpl' -->(Configuration) from System Default
    [72] BC4J Property jbo.maxpoolsize='2147483647' -->(Configuration) from System Default
    [73] BC4J Property jbo.initpoolsize='0' -->(Configuration) from System Default
    [74] BC4J Property jbo.poolrequesttimeout='30000' -->(Configuration) from System Default
    [75] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(Configuration) from System Default
    [76] BC4J Property jbo.poolminavailablesize='5' -->(Configuration) from System Default
    [77] BC4J Property jbo.poolmaxavailablesize='25' -->(Configuration) from System Default
    [78] BC4J Property jbo.poolmaxinactiveage='600000' -->(Configuration) from System Default
    [79] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
    [80] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
    [81] BC4J Property jbo.viewlink.consistent='false' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
    [82] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
    [83] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
    [84] BC4J Property jbo.SQLBuilder='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
    [85] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
    [86] BC4J Property jbo.TypeMapEntries='Oracle' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
    [87] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
    [88] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
    [89] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
    [90] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
    [91] BC4J Property oracle.jbo.defineColumnLength='as_chars' -->(MetaObjectManager) from System Default
    [92] Skipping empty Property jbo.tmpdir from System Default
    [93] Skipping empty Property jbo.server.internal_connection from System Default
    [94] Skipping empty Property SessionClass from System Default
    [95] Skipping empty Property TransactionFactory from System Default
    [96] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
    [97] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [98] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [99] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [100] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [101] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [102] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
    [103] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
    [104] Skipping empty Property oracle.home from System Default
    [105] Skipping empty Property oc4j.name from System Default
    [106] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
    [107] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
    [108] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
    [109] Skipping empty Property oracle.jbo.schema from System Default
    [110] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
    [111] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
    [112] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
    [113] Skipping empty Property ord.HttpTempDir from System Default
    [114] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
    [115] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
    [116] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
    [117] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
    [118] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
    [119] Skipping empty Property ord.rp.codebase from System Default
    [120] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
    [121] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
    [122] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
    [123] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
    [124] BC4J Property jbo.security.loginmodule='oracle.security.jazn.tools.Admintool' -->(SessionImpl) from System Default
    [125] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
    [126] Copying unknown Client property (DBconnection='jdbc:oracle:thin:@cdsvandromeda:1521:dctm') to session
    [127] Copying unknown Client property (password='kitbordo') to session
    [128] Copying unknown Client property (JDBCName='Kitbordo') to session
    [129] Copying unknown Client property (jbo.jndi.use_default_context='true') to session
    [130] Copying unknown Client property (user='kitbordo') to session
    [131] Copying unknown Client property (jbo.applicationmoduleclassname='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
    [132] Copying unknown Client property (ApplicationName='br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule') to session
    [133] WARNING: Unused property: LC='Calling Function' found in /oracle/jbo/common/Diagnostic.properties resource
    [134] }} finished loading BC4J properties
    [135] -----------------------------------------------------------
    Diagnostics: (Properties (re)loaded) Routing diagnostics to standard output (use -Djbo.debugoutput=silent to remove)
    [136] Diagnostic Properties: Timing:false Functions:false Linecount:true Threshold:6
    [137] JavaVMVersion: 1.4.1_01-b01
    [138] JavaVMVendor: Sun Microsystems Inc.
    [139] JavaVMName: Java HotSpot(TM) Client VM
    [140] OperatingSystemName: Windows 2000
    [141] OperatingSystemVersion: 5.0
    [142] OperatingSystemUsername: Lbueno
    [143] Jbo323Compatible Flag: false, str: false
    [144] Loading from Sinalizacao.jpx file
    [145] Loading from indvidual XML files
    [146] Loading the Containees for the Package 'Sinalizacao.Sinalizacao'.
    [147] Connected to Oracle JBO Server - Version: 9.0.3.11.88
    [148] BC4J: Instrumentation disabled
    [149] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/service.xml file
    [150] Loading from indvidual XML files
    [151] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.service'.
    [152] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/service/CadastroDeManutencaoModule.xml file
    [153] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/view.xml file
    [154] Loading from indvidual XML files
    [155] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.view'.
    [156] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/TipoManutencaoBoiaView.xml file
    [157] ViewObjectImpl's default fetch mode = 0
    [158] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/entity.xml file
    [159] Loading from indvidual XML files
    [160] Loading the Containees for the Package 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.entity.entity'.
    [161] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaEntity.xml file
    [162] Loading Typemap entries from oracle.jbo.common.OracleTypeMapEntries
    [163] Stringmanager using default locale: 'pt_BR'
    [164] CSMessageBundle (language base) being initialized
    [165] OracleSQLBuilder reached getInterface
    [166] Oracle SQL Builder Version 3.2.0.0.0
    [167] ViewRowSetImpl's jbo.viewlink.consistent = false (0)
    [168] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/BoiasPorCanalView.xml file
    [169] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/BoiaEntity.xml file
    [170] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoBoiaView.xml file
    [171] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoManutencaoBoiaEntity.xml file
    [172] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaView.xml file
    [173] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaEntity.xml file
    [174] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/ManutencaoBoiaViewLink.xml file
    [175] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/ManutencaoBoiaAssociation.xml file
    [176] Using DatabaseTransactionFactory implementation oracle.jbo.server.DatabaseTransactionFactory
    [177] mUsePersColl is false
    [178] ViewObjectImpl.mDefaultMaxRowsPerNode is 70
    [179] ViewObjectImpl.mDefaultMaxActiveNodes is 30
    [180] DBTransactionImpl Max Cursors is 50
    [181] Created root application module: 'br.com.cvrd.logistica.kitbordo.sinalizacao.model.service.CadastroDeManutencaoModule'
    [182] Locale is: 'pt_BR'
    [183] DefaultConnectionStrategy is establishing an application module connection
    [184] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [185] Creating a new pool resource
    [186] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo}' ...
    [187] Successfully logged in
    [188] JDBCDriverVersion: 9.0.1.4.0
    [189] DatabaseProductName: Oracle
    [190] DatabaseProductVersion: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production With the Partitioning, OLAP and Oracle Data Mining options JServer Release 9.2.0.1.0 - Production
    [191] **PCollManager.resolveName** tabName=PS_TXN
    [192] **retrieve** id=-1, collid=6838, keyonly=falseGetting a connection for internal use...
    [193] Creating internal connection...
    [194] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [195] Creating a new pool resource
    [196] Trying connection/2: url='jdbc:oracle:thin:@cdsvandromeda:1521:dctm' info='{user=kitbordo, password=kitbordo, dll=ocijdbc9, protocol=thin}' ...
    [197] , parid=0, ret=oracle.jdbc.driver.OracleBlobInputStream
    [198] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
    [199] **retrieve** id=1, collid=6838, keyonly=false, parid=-1, ret=oracle.jdbc.driver.OracleBlobInputStream
    [200] stmt: select parentId, content from "PS_TXN" where id=:1 and collid=:2
    [201] Clearing VO cache for TipoManutencaoBoiaView
    [202] Clear QueryCollection in cache...
    [203] Clearing VO cache for BoiasPorCanalView
    [204] Clear QueryCollection in cache...
    [205] Clearing VO cache for HistoricoManutencaoBoiaView
    [206] Clear QueryCollection in cache...
    [207] Getting a connection for internal use...
    [208] Creating internal connection...
    [209] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [210] Clearing VO cache for BoiasPorCanalView
    [211] Clear QueryCollection in cache...
    07/09/2004 12:07:51 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.actions.LocalStrings', returnNull=true
    [212] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/view/HistoricoManutencaoViewLink.xml file
    [213] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/HistoricoDeManutencaoDeBoiaAssociation.xml file
    [214] Column count: 23
    [215] ViewObject : Created new QUERY statement
    [216] SELECT Boia.H55SCANA, Boia.H55CODBO, Boia.H55LATGR, Boia.H55LATMI, Boia.H55LATSE, Boia.H55INDLA, Boia.H55VALEX, Boia.H55LONGR, Boia.H55LONMI, Boia.H55LONSE, Boia.H55INDLO, Boia.H55VALEY, Boia.H55CORLP, Boia.H55REMOV, Boia.H55NRORD, Boia.H55PROJE, Boia.H55PINTU, Boia.H55CARAC, Boia.H55EQLUM, Boia.H55FOLUM, Boia.H55EQFUN, Boia.H55EQMON FROM H55BOIAT Boia WHERE Boia.H55SCANA = :1
    [217] Binding param 1: 21
    [218] Clearing VO cache for TipoManutencaoBoiaView
    [219] Clear QueryCollection in cache...
    [220] Column count: 2
    [221] ViewObject : Created new QUERY statement
    [222] SELECT TipoManutencaoBoiaEntity.H5PSTPMB, TipoManutencaoBoiaEntity.H5PNOMAN FROM H5PTPMBT TipoManutencaoBoiaEntity ORDER BY TipoManutencaoBoiaEntity.H5PNOMAN ASC
    07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.bean.LocalStrings', returnNull=true
    07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
    07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
    07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
    07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
    [223] Application Module failover is enabled
    [224] Getting a connection for internal use...
    [225] Creating internal connection...
    [226] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [227] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" im="1" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    07/09/2004 12:07:52 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.logic.LocalStrings', returnNull=true
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [228] **insert** id=1, parid=-1, collid=6844, keyArr.len=-1, cont.len=1043
    [229] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [230] **commit** #pending ops=1
    [231] **insert** id=-1, parid=0, collid=6844, keyArr.len=-1, cont.len=665
    [232] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [233] **commit** #pending ops=1
    [234] Getting a connection for internal use...
    [235] Creating internal connection...
    [236] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [237] **deleteAll** collid=6838
    [238] stmt: delete "PS_TXN" where collid=:1
    [239] **commit** #pending ops=1
    [240] Reusing a cached session application module instance
    [241] Getting a connection for internal use...
    [242] Creating internal connection...
    [243] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [244] Column count: 5
    [245] ViewObject : Created new QUERY statement
    [246] SELECT HistoricoManutencaoBoia.H56CODBO, HistoricoManutencaoBoia.H56DTMAN, HistoricoManutencaoBoia.H56DESCR, HistoricoManutencaoBoia.H56SCANA FROM H56HIMAT HistoricoManutencaoBoia WHERE HistoricoManutencaoBoia.H56CODBO = ? and HistoricoManutencaoBoia.H56SCANA = ?
    [247] Binding param 1: XPPP
    [248] Binding param 2: 21
    [249] Clearing VO cache for HistoricoManutencaoBoiaView
    [250] Clear QueryCollection in cache...
    [251] Column count: 5
    [252] ViewObject : Reusing defined prepared Statement
    [253] Binding param 1: XPPP
    [254] Binding param 2: 21
    [255] Application Module failover is enabled
    [256] Getting a connection for internal use...
    [257] Creating internal connection...
    [258] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [259] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [260] **insert** id=1, parid=-1, collid=6847, keyArr.len=-1, cont.len=1036
    [261] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [262] **commit** #pending ops=1
    [263] **insert** id=-1, parid=0, collid=6847, keyArr.len=-1, cont.len=665
    [264] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [265] **commit** #pending ops=1
    [266] Getting a connection for internal use...
    [267] Creating internal connection...
    [268] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [269] **deleteAll** collid=6844
    [270] stmt: delete "PS_TXN" where collid=:1
    [271] **commit** #pending ops=1
    [272] Reusing a cached session application module instance
    [273] Getting a connection for internal use...
    [274] Creating internal connection...
    [275] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [276] Column count: 6
    [277] ViewObject close prepared statements...
    [278] ViewObject : Created new QUERY statement
    [279] SELECT ManutencaoBoiaEntity.H6ASCANA, ManutencaoBoiaEntity.H6ACODBO, ManutencaoBoiaEntity.H6ADTMAN, ManutencaoBoiaEntity.H6ASTPMB, TipoManutencaoBoiaEntity.H5PSTPMB AS CODIGO_TIPO_MANUTENCAO_BOIA1, TipoManutencaoBoiaEntity.H5PNOMAN FROM H6AMABOT ManutencaoBoiaEntity, H5PTPMBT TipoManutencaoBoiaEntity WHERE (ManutencaoBoiaEntity.H6ASCANA = :1 AND ManutencaoBoiaEntity.H6ACODBO = :2 AND ManutencaoBoiaEntity.H6ADTMAN = :3)
    [280] Binding param 1: 21
    [281] Binding param 2: XPPP
    [282] Binding param 3: 2004-06-02
    07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
    [283] Application Module failover is enabled
    [284] Getting a connection for internal use...
    [285] Creating internal connection...
    [286] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [287] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDAT07/09/2004 12:08:19 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
    07/09/2004 12:08:20 org.apache.struts.util.PropertyMessageResources <init>
    INFO: Initializing, config='org.apache.struts.taglib.html.LocalStrings', returnNull=true
    A[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [288] **insert** id=1, parid=-1, collid=6849, keyArr.len=-1, cont.len=1036
    [289] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [290] **commit** #pending ops=1
    [291] **insert** id=-1, parid=0, collid=6849, keyArr.len=-1, cont.len=665
    [292] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [293] **commit** #pending ops=1
    [294] Getting a connection for internal use...
    [295] Creating internal connection...
    [296] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [297] **deleteAll** collid=6847
    [298] stmt: delete "PS_TXN" where collid=:1
    [299] **commit** #pending ops=1
    [300] Reusing a cached session application module instance
    [301] Getting a connection for internal use...
    [302] Creating internal connection...
    [303] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [304] OracleSQLBuilder Executing Select on: H56HIMAT (true)
    [305] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
    [306] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
    [307] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatoriosSetorSinalizacaoNauticaBoiaAssociation.xml file
    [308] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/RelatorioSetorSinalizacaoNauticaEntity.xml file
    [309] OracleSQLBuilder Executing Select on: H55BOIAT (true)
    [310] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
    [311] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
    [312] Loading from /br/com/cvrd/logistica/kitbordo/sinalizacao/model/entity/TipoManutencaoBoiaAssociation.xml file
    [313] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [314] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
    [315] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
    [316] QueryCollection: afterRemove(0)
    [317] ViewRowCache: removeReference
    [318] ViewRowCache: removeReference
    [319] QueryCollection: afterRemove(5)
    [320] ViewRowCache: removeReference
    [321] ViewRowCache: removeReference
    [322] QueryCollection: afterRemove(10)
    [323] ViewRowCache: removeReference
    [324] ViewRowCache: removeReference
    [325] QueryCollection: afterRemove(15)
    [326] ViewRowCache: removeReference
    [327] ViewRowCache: removeReference
    [328] QueryCollection: afterRemove(20)
    [329] ViewRowCache: removeReference
    [330] ViewRowCache: removeReference
    [331] QueryCollection: afterRemove(25)
    [332] ViewRowCache: removeReference
    [333] ViewRowCache: removeReference
    [334] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [335] Reusing prepared LOCK statement
    [336] QueryCollection: afterRemove(0)
    [337] ViewRowCache: removeReference
    [338] ViewRowCache: removeReference
    [339] QueryCollection: afterRemove(4)
    [340] ViewRowCache: removeReference
    [341] ViewRowCache: removeReference
    [342] QueryCollection: afterRemove(8)
    [343] ViewRowCache: removeReference
    [344] ViewRowCache: removeReference
    [345] QueryCollection: afterRemove(12)
    [346] ViewRowCache: removeReference
    [347] ViewRowCache: removeReference
    [348] QueryCollection: afterRemove(16)
    [349] ViewRowCache: removeReference
    [350] ViewRowCache: removeReference
    [351] QueryCollection: afterRemove(20)
    [352] ViewRowCache: removeReference
    [353] ViewRowCache: removeReference
    [354] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [355] Reusing prepared LOCK statement
    [356] QueryCollection: afterRemove(0)
    [357] ViewRowCache: removeReference
    [358] ViewRowCache: removeReference
    [359] QueryCollection: afterRemove(3)
    [360] ViewRowCache: removeReference
    [361] ViewRowCache: removeReference
    [362] QueryCollection: afterRemove(6)
    [363] ViewRowCache: removeReference
    [364] ViewRowCache: removeReference
    [365] QueryCollection: afterRemove(9)
    [366] ViewRowCache: removeReference
    [367] ViewRowCache: removeReference
    [368] QueryCollection: afterRemove(12)
    [369] ViewRowCache: removeReference
    [370] ViewRowCache: removeReference
    [371] QueryCollection: afterRemove(15)
    [372] ViewRowCache: removeReference
    [373] ViewRowCache: removeReference
    [374] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [375] Reusing prepared LOCK statement
    [376] QueryCollection: afterRemove(0)
    [377] ViewRowCache: removeReference
    [378] ViewRowCache: removeReference
    [379] QueryCollection: afterRemove(2)
    [380] ViewRowCache: removeReference
    [381] ViewRowCache: removeReference
    [382] QueryCollection: afterRemove(4)
    [383] ViewRowCache: removeReference
    [384] ViewRowCache: removeReference
    [385] QueryCollection: afterRemove(6)
    [386] ViewRowCache: removeReference
    [387] ViewRowCache: removeReference
    [388] QueryCollection: afterRemove(8)
    [389] ViewRowCache: removeReference
    [390] ViewRowCache: removeReference
    [391] QueryCollection: afterRemove(10)
    [392] ViewRowCache: removeReference
    [393] ViewRowCache: removeReference
    [394] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [395] Reusing prepared LOCK statement
    [396] QueryCollection: afterRemove(0)
    [397] ViewRowCache: removeReference
    [398] ViewRowCache: removeReference
    [399] QueryCollection: afterRemove(1)
    [400] ViewRowCache: removeReference
    [401] ViewRowCache: removeReference
    [402] QueryCollection: afterRemove(2)
    [403] ViewRowCache: removeReference
    [404] ViewRowCache: removeReference
    [405] QueryCollection: afterRemove(3)
    [406] ViewRowCache: removeReference
    [407] ViewRowCache: removeReference
    [408] QueryCollection: afterRemove(4)
    [409] ViewRowCache: removeReference
    [410] ViewRowCache: removeReference
    [411] QueryCollection: afterRemove(5)
    [412] ViewRowCache: removeReference
    [413] ViewRowCache: removeReference
    [414] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [415] Reusing prepared LOCK statement
    [416] QueryCollection: afterRemove(0)
    [417] ViewRowCache: removeReference
    [418] ViewRowCache: removeReference
    [419] QueryCollection: afterRemove(0)
    [420] ViewRowCache: removeReference
    [421] ViewRowCache: removeReference
    [422] QueryCollection: afterRemove(0)
    [423] ViewRowCache: removeReference
    [424] ViewRowCache: removeReference
    [425] QueryCollection: afterRemove(0)
    [426] ViewRowCache: removeReference
    [427] ViewRowCache: removeReference
    [428] QueryCollection: afterRemove(0)
    [429] ViewRowCache: removeReference
    [430] ViewRowCache: removeReference
    [431] QueryCollection: afterRemove(0)
    [432] ViewRowCache: removeReference
    [433] ViewRowCache: removeReference
    [434] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
    [435] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
    [436] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
    [437] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
    [438] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
    [439] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
    [440] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
    [441] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
    [442] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
    [443] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
    [444] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
    [445] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
    [446] OracleSQLBuilder Executing DML on: H6AMABOT (Deletar)
    [447] DELETE FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4
    [448] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
    [449] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
    [450] TipoManutencaoBoiaView notify COMMIT ...
    [451] BoiasPorCanalView notify COMMIT ...
    [452] HistoricoManutencaoBoiaView notify COMMIT ...
    [453] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
    [454] EntityCache close prepared statement
    [455] EntityCache close prepared statement
    [456] EntityCache close prepared statement
    [457] Clearing VO cache for BoiasPorCanalView
    [458] Clear QueryCollection in cache...
    [459] Column count: 23
    [460] ViewObject : Reusing defined prepared Statement
    [461] Binding param 1: 21
    [462] Clearing VO cache for TipoManutencaoBoiaView
    [463] Clear QueryCollection in cache...
    [464] Column count: 2
    [465] ViewObject : Reusing defined prepared Statement
    [466] Application Module failover is enabled
    [467] Getting a connection for internal use...
    [468] Creating internal connection...
    [469] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [470] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [471] **insert** id=1, parid=-1, collid=6850, keyArr.len=-1, cont.len=1036
    [472] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [473] **commit** #pending ops=1
    [474] **insert** id=-1, parid=0, collid=6850, keyArr.len=-1, cont.len=665
    [475] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [476] **commit** #pending ops=1
    [477] Getting a connection for internal use...
    [478] Creating internal connection...
    [479] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [480] **deleteAll** collid=6849
    [481] stmt: delete "PS_TXN" where collid=:1
    [482] **commit** #pending ops=1
    [483] Reusing a cached session application module instance
    [484] Getting a connection for internal use...
    [485] Creating internal connection...
    [486] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [487] Application Module failover is enabled
    [488] Getting a connection for internal use...
    [489] Creating internal connection...
    [490] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [491] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [492] **insert** id=1, parid=-1, collid=6851, keyArr.len=-1, cont.len=1036
    [493] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [494] **commit** #pending ops=1
    [495] **insert** id=-1, parid=0, collid=6851, keyArr.len=-1, cont.len=665
    [496] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [497] **commit** #pending ops=1
    [498] Getting a connection for internal use...
    [499] Creating internal connection...
    [500] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [501] **deleteAll** collid=6850
    [502] stmt: delete "PS_TXN" where collid=:1
    [503] **commit** #pending ops=1
    [504] Reusing a cached session application module instance
    [505] Getting a connection for internal use...
    [506] Creating internal connection...
    [507] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [508] OracleSQLBuilder Executing Select on: H56HIMAT (true)
    [509] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
    [510] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
    [511] OracleSQLBuilder Executing Select on: H55BOIAT (true)
    [512] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
    [513] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
    [514] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
    [515] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
    [516] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
    [517] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
    [518] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
    [519] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
    [520] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
    [521] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
    [522] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
    [523] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
    [524] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
    [525] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
    [526] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
    [527] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
    [528] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
    [529] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
    [530] TipoManutencaoBoiaView notify COMMIT ...
    [531] BoiasPorCanalView notify COMMIT ...
    [532] HistoricoManutencaoBoiaView notify COMMIT ...
    [533] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
    [534] EntityCache close prepared statement
    [535] EntityCache close prepared statement
    [536] Clearing VO cache for BoiasPorCanalView
    [537] Clear QueryCollection in cache...
    [538] Column count: 23
    [539] ViewObject : Reusing defined prepared Statement
    [540] Binding param 1: 21
    [541] Clearing VO cache for TipoManutencaoBoiaView
    [542] Clear QueryCollection in cache...
    [543] Column count: 2
    [544] ViewObject : Reusing defined prepared Statement
    [545] Application Module failover is enabled
    [546] Getting a connection for internal use...
    [547] Creating internal connection...
    [548] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [549] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [550] **insert** id=1, parid=-1, collid=6853, keyArr.len=-1, cont.len=1036
    [551] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [552] **commit** #pending ops=1
    [553] **insert** id=-1, parid=0, collid=6853, keyArr.len=-1, cont.len=665
    [554] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [555] **commit** #pending ops=1
    [556] Getting a connection for internal use...
    [557] Creating internal connection...
    [558] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [559] **deleteAll** collid=6851
    [560] stmt: delete "PS_TXN" where collid=:1
    [561] **commit** #pending ops=1
    [562] Reusing a cached session application module instance
    [563] Getting a connection for internal use...
    [564] Creating internal connection...
    [565] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [566] Application Module failover is enabled
    [567] Getting a connection for internal use...
    [568] Creating internal connection...
    [569] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [570] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [571] **insert** id=1, parid=-1, collid=6854, keyArr.len=-1, cont.len=1036
    [572] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [573] **commit** #pending ops=1
    [574] **insert** id=-1, parid=0, collid=6854, keyArr.len=-1, cont.len=665
    [575] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [576] **commit** #pending ops=1
    [577] Getting a connection for internal use...
    [578] Creating internal connection...
    [579] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [580] **deleteAll** collid=6853
    [581] stmt: delete "PS_TXN" where collid=:1
    [582] **commit** #pending ops=1
    [583] Reusing a cached session application module instance
    [584] Getting a connection for internal use...
    [585] Creating internal connection...
    [586] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [587] OracleSQLBuilder Executing Select on: H56HIMAT (true)
    [588] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
    [589] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
    [590] OracleSQLBuilder Executing Select on: H55BOIAT (true)
    [591] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
    [592] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
    [593] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [594] Built select: 'SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity'
    [595] Executing LOCK...SELECT H6ASCANA, H6ACODBO, H6ADTMAN, H6ASTPMB FROM H6AMABOT ManutencaoBoiaEntity WHERE H6ASCANA=:1 AND H6ACODBO=:2 AND H6ADTMAN=:3 AND H6ASTPMB=:4 FOR UPDATE NOWAIT
    [596] QueryCollection: afterRemove(0)
    [597] ViewRowCache: removeReference
    [598] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [599] Reusing prepared LOCK statement
    [600] QueryCollection: afterRemove(0)
    [601] ViewRowCache: removeReference
    [602] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [603] Reusing prepared LOCK statement
    [604] QueryCollection: afterRemove(0)
    [605] ViewRowCache: removeReference
    [606] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [607] Reusing prepared LOCK statement
    [608] QueryCollection: afterRemove(0)
    [609] ViewRowCache: removeReference
    [610] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [611] Reusing prepared LOCK statement
    [612] QueryCollection: afterRemove(0)
    [613] ViewRowCache: removeReference
    [614] OracleSQLBuilder Executing Select on: H6AMABOT (true)
    [615] Reusing prepared LOCK statement
    [616] QueryCollection: afterRemove(0)
    [617] ViewRowCache: removeReference
    [618] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
    [619] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
    [620] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
    [621] BaseSQLBuilder: releaseSavepoint 'BO_SP' ignored
    [622] TipoManutencaoBoiaView notify COMMIT ...
    [623] BoiasPorCanalView notify COMMIT ...
    [624] HistoricoManutencaoBoiaView notify COMMIT ...
    [625] ManutencaoBoiaEntity_ManutencaoBoiaAssociation_ManutencaoBoiaView notify COMMIT ...
    [626] EntityCache close prepared statement
    [627] EntityCache close prepared statement
    [628] EntityCache close prepared statement
    [629] Clearing VO cache for BoiasPorCanalView
    [630] Clear QueryCollection in cache...
    [631] Column count: 23
    [632] ViewObject : Reusing defined prepared Statement
    [633] Binding param 1: 21
    [634] Clearing VO cache for TipoManutencaoBoiaView
    [635] Clear QueryCollection in cache...
    [636] Column count: 2
    [637] ViewObject : Reusing defined prepared Statement
    [638] Application Module failover is enabled
    [639] Getting a connection for internal use...
    [640] Creating internal connection...
    [641] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [642] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [643] **insert** id=1, parid=-1, collid=6855, keyArr.len=-1, cont.len=1036
    [644] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [645] **commit** #pending ops=1
    [646] **insert** id=-1, parid=0, collid=6855, keyArr.len=-1, cont.len=665
    [647] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [648] **commit** #pending ops=1
    [649] Getting a connection for internal use...
    [650] Creating internal connection...
    [651] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [652] **deleteAll** collid=6854
    [653] stmt: delete "PS_TXN" where collid=:1
    [654] **commit** #pending ops=1
    [655] Reusing a cached session application module instance
    [656] Getting a connection for internal use...
    [657] Creating internal connection...
    [658] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [659] Application Module failover is enabled
    [660] Getting a connection for internal use...
    [661] Creating internal connection...
    [662] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [663] <AM MomVer="0">
    <cd/>
    <TXN Def="0" New="0" Lok="1"/>
    <VO>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.TipoManutencaoBoiaView" Name="TipoManutencaoBoiaView"/>
    <VO It="1" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.BoiasPorCanalView" Name="BoiasPorCanalView">
    <args ct="1">
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    <VO It="1" Sz="10" St="0" ac="0" Def="br.com.cvrd.logistica.kitbordo.sinalizacao.model.view.HistoricoManutencaoBoiaView" Name="HistoricoManutencaoBoiaView">
    <args ct="2">
    <arg>
    <![CDATA[XPPP ]]>
    </arg>
    <arg>
    <![CDATA[21]]>
    </arg>
    </args>
    </VO>
    </VO>
    </AM>
    [664] **insert** id=1, parid=-1, collid=6856, keyArr.len=-1, cont.len=1036
    [665] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [666] **commit** #pending ops=1
    [667] **insert** id=-1, parid=0, collid=6856, keyArr.len=-1, cont.len=665
    [668] stmt: begin insert into "PS_TXN" values (:1, :2, :3, empty_blob(), sysdate) returning content into :4; end;
    [669] **commit** #pending ops=1
    [670] Getting a connection for internal use...
    [671] Creating internal connection...
    [672] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [673] **deleteAll** collid=6855
    [674] stmt: delete "PS_TXN" where collid=:1
    [675] **commit** #pending ops=1
    [676] Reusing a cached session application module instance
    [677] Getting a connection for internal use...
    [678] Creating internal connection...
    [679] Oracle SQLBuilder: Registered driver: oracle.jdbc.driver.OracleDriver
    [680] OracleSQLBuilder Executing Select on: H56HIMAT (true)
    [681] Built select: 'SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity'
    [682] Executing LOCK...SELECT H56CODBO, H56DTMAN, H56DESCR, H56SCANA FROM H56HIMAT HistoricoManutencaoBoiaEntity WHERE H56CODBO=:1 AND H56DTMAN=:2 AND H56SCANA=:3 FOR UPDATE NOWAIT
    [683] OracleSQLBuilder Executing Select on: H55BOIAT (true)
    [684] Built select: 'SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity'
    [685] Executing LOCK...SELECT H55SCANA, H55CODBO, H55LATGR, H55LATMI, H55LATSE, H55INDLA, H55VALEX, H55LONGR, H55LONMI, H55LONSE, H55INDLO, H55VALEY, H55CORLP, H55REMOV, H55NRORD, H55PROJE, H55PINTU, H55CARAC, H55EQLUM, H55FOLUM, H55EQFUN, H55EQMON FROM H55BOIAT BoiaEntity WHERE H55SCANA=:1 AND H55CODBO=:2 FOR UPDATE NOWAIT
    [686] EntityCache:add WARNING - a new row with a key equal to a removed row
    [687] EntityCache:add WARNING - a new row with a key equal to a removed row
    [688] EntityCache:add WARNING - a new row with a key equal to a removed row
    [689] EntityCache:add WARNING - a new row with a key equal to a removed row
    [690] EntityCache:add WARNING - a new row with a key equal to a removed row
    [691] EntityCache:add WARNING - a new row with a key equal to a removed row
    [692] OracleSQLBuilder Executing DML on: H56HIMAT (Atualizar)
    [693] BEGIN UPDATE H56HIMAT HistoricoManutencaoBoiaEntity SET H56CODBO=:1,H56DTMAN=:2,H56DESCR=:3 WHERE H56CODBO=:4 AND H56DTMAN=:5 AND H56SCANA=:6 RETURNING H56CODBO INTO :7; END;
    [694] OracleSQLBuilder Executing DML on: H6AMABOT (Inserir)
    [695] BEGIN INSERT INTO H6AMABOT(H6ASCANA,H6ACODBO,H6ADTMAN,H6ASTPMB) VALUES (:1,:2,:3,:4) RETURNING H6ACODBO INTO :5; END;
    [696] OracleSQLBuilderImpl.doEntityDML failed...
    [697] X/Open SQL State is: 23000
    [698] java.sql.SQLException: ORA-00001: restrição exclusiva (KITBORDO.PK_H6AMABOT) violada
    ORA-06512: em line 1
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:187)
         at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:241)
         at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
         at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1477)
         at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
         at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2004)
         at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1924)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2562)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:452)
         at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:526)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:370)
     

    Hi Sung, Thanks for your reply.
    Leonardo:
    If I understand your msg correctly, I'm wondering if
    the data model as you described is complete.
    You state that you have MaintenanceType, Maintenance,
    and MaintenanceOrder, but don't you need
    MaintenanceOrderLine?MaintenanceOrderLine is what I'm calling Maintenance. A Maintenace record is used just to link a MaintenanceOrder to a MaintenanceType
    >
    Otherwise, you say that you removed all Maintenance's
    in step 2). How did you form a list of all
    Maintenance's in step 4)? How do you form this
    list?
    was raised due to unique constraint violationAt step 3) I'm using a view object, MaintenanceTypeView, to create a list of checkboxes, one for each MaintenanceType.
    At step 4), for each MaintenanceType selected in the form, I'm creating a new Maintenance using:
    //All codes of maintenance types, that already have a
    //respective maintenance record in the db, have already
    //been remove from the maintenancesToInsert list at this
    //point
    for (Iterator iter = maintenancesToInsert.iterator(); iter.hasNext();) {
    MaintenanceViewRow maintenanceRow = (MaintenanceViewRow) maintenanceView.createRow();
    maintenanceRow.setMaintenanceTypeCode(Integer.valueOf((String)iter.next()));
    maintenanceView.insertRow(maintenanceRow);
    >
    Sung

  • Navigation menu active page color not behaving as it should

    I created an unordered list for the mainnav links. I use the following lines in the code:
    <li><a href="../index.html" class="thispage">Home</a></li>
            <li><a href="#">Events</a></li>
            <li><a href="#">Music</a></li>
            <li><a href="#">Agenda</a></li>
            <li><a href="../Pages/artists.html">Artists</a></li>
    The Home button shows the color for 'active', but if I go to the artists page it first shows the hover color, then the page opens but does not show the active color.... I.o.w. the Home button stays on active though it is not active.
    Please see the effect on my testsite: www.adrianrooymans.nl

    armona22 wrote:
    I'm sorry, but I tried that already, and it does not solve the problem. If I do that I get TWO active pages, but clicking anywhere on the artists page makes the blue color go away, except for the Home button.... I could temporarily put that on the testserver so that you could see what happens (unless you beleive me).
    You will get two active menu items unless the class is removed from the links that you don't want it on.
    If you look at the example page code in the 'completed' folder of the Bayside Beat tutorial you will see on the 'index' page the class has been added to the 'index' link:
    <nav id="mainnav">
          <ul>
            <li><a href="index.html" class="thispage">Home</a></li>
            <li><a href="sightseeing.html">Sightseeing</a></li>
            <li><a href="#">Eating Out</a></li>
            <li><a href="#">What's On</a></li>
            <li><a href="#">Where to Stay</a></li>
          </ul>
        </nav>
    Whilst on the 'sightseeing' page the class has been moved to the 'sightseeing' link:
    <nav id="mainnav">
            <ul>
                <li><a href="index.html">Home</a></li>
                <li><a href="sightseeing.html" class="thispage">Sightseeing</a></li>
                <li><a href="#">Eating Out</a></li>
                <li><a href="#">What's On</a></li>
                <li><a href="#">Where to Stay</a></li>
            </ul>
        </nav>

  • How do I create an unordered list with three items and link to id's

    How do I create an ordered list with three items and linl to id's on my page

    Thanks, I guess what I was really asking, Is there a n option in the insert menu or somewhere where Dreamweaver does it for you.
    I am not clear on what you are wanting DW to do for you?  Is it that you want it to insert a three item unordered list?  No - there's no such function.  You would need to click in Design view where you want the list to go, click on the bulleted list icon on the Property inspector, and then enter the three items separated by carriage returns.  Then you'd have to link each item specifically.
    To enter the named anchors to element ID values, CS5 has no way to do this.  You'd have to enter those links manually.

  • Unordered list bullets and Spry Accordion widget

    In all browsers except IE (surprise, surprise!), the page
    works fine. Otherwise the bullets in my unordered list appear at
    the bottom of the multiline text they are associated with. I
    haven't had this problem in similar pages not using the accordion
    widget.
    Please have a look:
    http://www.yale.edu/faith/rc-fwl.htm
    vs.
    http://www.yale.edu/faith/rc-esw.htm
    Thanks,
    Gary

    <div class="AccordionPanelContent">Castaway the: Restaurant<br />
                  1250 Harvard Rd.<br />
                  Burbank, CA 91501<br />
                  - www.castawayrestaurant.com - (818) 848-6691</p>
    Oops!
    Missing the opening <p>
    I didn't find it, the validator did.
    Martin

  • Rounded corners on unordered list

    I'd like to be able to have style my vertical menu, made with
    an
    unordered list, to have rounded corners. The menu is a fixed
    width, but
    the items could sometimes run onto two lines, so the height
    of each item
    needs to be flexible.
    I created images called top.gif and bottom.gif for the curves
    and when
    I've done boxes I've made the bottom image a background to
    the box div
    tag and the top image a background to the heading tag within
    the div.
    However with the unordered list I don't really have two
    elements to
    attach the images to, if you understand what I mean?
    I've been googling but haven't yet found a solution. Can
    anyone
    recommend a way of doing this?
    Thanks
    Vix

    > I've been googling but haven't yet found a solution. Can
    anyone recommend
    > a way of doing this?
    Could could wrap the UL in a DIV, giving you two elements.
    You could give the first LI and last LI custom classes,
    giving you to
    elements.
    While not pristine, I often will use wrapper divs to attach
    CSS too:
    <div id="menuOuterwrapper">
    <div id="innnerWrapper">
    <ul>...</ul>
    </div></div>
    That works for me in that it keeps my 'style HTML' separate
    from my 'content
    HTML'.
    A goofy interpretation of 'separation of style and content',
    perhaps.
    -Darrel

  • Ordered and Unordered Lists viewed in WYSIWYG Editor in RoboHelp 10

    I recently upgraded a project from RH 9 (9.0.2.271) to RH 10 (10.0.0.287). Ordered and unordered lists display in the WYSIWYG Editor with more spacing around each line. When I generate the output to HTML Help, the spacing looks fine. I also tested generating output to WebHelp, and again, the output looks fine.
    I have paragraph and list styles defined in my style sheet that I apply to the text in the topic. I also looked at the styles in RH 10 and Media is set to "None."
    Using the Style Pod, I looked at the set up of the parapgraph and list styles. For those styles, (and my body text styles - which look fine in the WYSIWYG Editor) have spacing before and after spacing set. (NOTE: These styles were created in RH8 and the WYSIWYG Editor displayed the styles appropriately in RH8 and RH9.) Even though I changed the style sheet, the WYSIWYG Editor is still displaying more space around the styles then I am expecting.
    I know this is not a huge issue since the output looks fine, but I want to understand why the WYSIWYG Editor isn't working as I expect. I would like the editor to display with correct spacing.
    I attached a few screen captures showing what I see.
    HTML Help Output
    Thanks in advance for your help.

    I suspect part of the issue is that your list styles have spacing above and below and then you have applied paragraph styles that also have spacing above and below.
    Using both is OK and is how I work. However, I do not have any spacing above and below in my list styles. I rely on the paragraph style for that. It looks like Rh's Design Editor is applying both but browsers are not.
    It is still not quite the same in a browser as in Design Editor but it is much closer. There will also be browser differences anyway so it's a case of getting some balance.
    Try removing the before and after spacing in the list style. Alternatively, if you do not generate printed documentation then rely on the list style only. (Select the lists in a topic and set paragraph to None).
    Let us know if that is close enough.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Problem with One column Unordered list.

    Help me out !!!
    I have a "one column unordered list" as my report template. The query will return atleast 5 rows at any given point of time. The page shows only 3 records. I tried modifying "Number of Rows" attributes etc., nothing works.
    Let me know what I'm doing wrong or how to fix it.
    Thanks
    - Richard

    Thanks for replying, Scott
    Here is the app http://htmldb.oracle.com/pls/otn/f?p=19793:1
    I want to display only 4 rows (table has around 10 rows). I couldn't display more than 2. If I change the template, then everything works fine. Its just with the "One Column Unordered List" template that is not working.
    Thanks.
    - Richard.

  • Inserting ordered/unordered list items breakes the document design

    Hi,
    I use JEditorPane to edit HTML document. When I insert ordered/unordered list items, it breakes the design of the document. For example, I have next peace of the document:
    <center>
    This text is centered.
    One more line...
    </center>
    after inserting list item between text lines, document looks like :
    <center>
    This text is centered.
    </center>
    <ol>
    <li>
    </li>
    </ol>
    <center>
    One more line...
    </center>
    Note, that center tag is closed before list item and opened after it.
    Is it possible that inserted list items will save the original design of text around ?
    Thanks.
    .Vlad.

    Change the Leading in the Character Pallet to a smaller number, and increase the Space After in the Paragraph Pallet.
    The space between lines in the same paragraph is the leading, the space between paragraphs is not leading, and trying to achieve it with the leading field always creates more problems than it solves.

  • Unordered list formatting

    Does anyone know how to format string below as unordered list
    item, similar to HTML <ul><li>Log in and create new
    task</li>.... ? Any help will be greatly appreciated. Thanks.
    package classes
    [Bindable] public class Labels{
    static public const MAIN_PAGE_HELP:String =
    "Log in and create new task";
    static public const MAIN_PAGE_HELP:String =
    "Add category";

    Well, yes I have already tried that, but this is a string
    inside of a class/public const variable and I had no luck to stick
    a htmlText property there. I could not figure out the syntax or
    perhaps it's not belong there.

  • Unordered list with mouseover help

    A question from the past... I thought I dealt with this a few years back, but can not find it up here.. I have an unordered list of values (in a list in an accordion region!!) and wish to have mouseover help for the list items..
    Using APEX 4.0 on 11g Enterprise..
    IE 7 (yea I know, don't get ME started on that..)
    Can anyone shed light on how to do this again?
    Thank you,
    Tony Miller
    Dallas, TX

    Hi,
    This might help.
    http://dbswh.webhop.net/dbswh/f?p=BLOG:READ:0::::ARTICLE:2571800346711217
    Regards,
    Jari
    My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
    Twitter: http://www.twitter.com/jariolai

  • Unordered list displayed horizontally

    Hello,
    I am really new to Dreamweaver and I tried to complete (succesfully) the video on how to build my first website.
    Following the instruction was not so complicate...
    I tried to do pretty much alone the same focusing in creating the button from an unordered list
    I did with no CSS file, I created a new one empty. I am able to remove the bullet point, align the list but I can not display the button horizontally and I do not understand why.
    This is what I did:
    create a Navigation  (id= buttons)
    create an unordered list
    create a CSS file empty
    add a selection #buttons ul where I deleted bullet point and aligned the list
    add a selection #buttons a here I have problems. I apply with 25% (4 buttons) and set the float option to the left but the list remains vertical
    What I do wrong???? It seems I am doing like in the video. Is maybe related to the CSS file? Is not correct doing that with an empty one?
    Thanks for any help

    Hello, thanks for your answer. Of course it is working, but still I do not get why is not working mine.
    here it is the html
    <!doctype html>
    <html>
    <head>
    <meta charset="UTF-8">
    <title>Home</title>
    <link href="styles/main copy 2.css" rel="stylesheet" type="text/css">
    </head>
    <body>
    <nav id="navbar">
      <ul>
        <li>Home</li>
        <li>Products</li>
        <li>Services</li>
        <li>Contacts</li>
      </ul>
    </nav>
    </body>
    </html>
    and here the CSS
    #navbar ul {
              list-style-type: none;
              margin-top: 0px;
              margin-right: 0px;
              margin-bottom: 0px;
              margin-left: 0px;
              padding-top: 0px;
              padding-right: 0px;
              padding-bottom: 0px;
              padding-left: 0px;
    #navbar a {
              width: 25%;
              display: block;
              float: left;

Maybe you are looking for

  • Unable to view MMS in message conversations. Do they expire?

    +iPhone 3GS 16GB running Firmware 3.1.2 on O2 UK. (5GB+ Free Space)+ *I am unable to view older MMS on my iPhone.* Earlier in the week a friend sent me some MMS, but since then has text everyday, when I scroll to the top of conversation to view the M

  • Connecting to SLM2048 switch through management console XSLT Processor problem

    When I try to connect to my SLM2048 I receive the following message: "your browser does not seem to support xsltprocessor" How can I resolve this ? I'm using IE 11 and Chrome 40.0.2214.93 m

  • Is there at all a simple way to set the export size of a SWF?

    Need Help! I created an animated banner for class, using a standard size.  It ended up way to small, but all the element and text animation is done.  I can easily change the document size, but everytime I try to enlarge the elements, they pixilate an

  • Logon Load Balancing / Configuring Logon Groups problem

    In existing system setting: One Logon group (PUBLIC) and point to one instances.  This setting is work and SAP LOGON default clinet no is 320. I try to install one more instances on other server and add to same Logon group (PUBLIC). Install compent a

  • DV Start/Stop issue with DVC Pro 50

    Hey guys/ladies... I'm editing with Final Cut studio 2 (FCP 5) and i want to use the "DV Start/Stop Detect" feature. I'm capturing video with the DV50 NTSC 48KHz codec, however, when I try to use the DV Start/Stop Detect function, it gives me an erro