Unpivot statement in oracle

I have the following source table and i want to convert the columns into rows.
Source Table:
EmpID address1 address2 address3 address4 address5
100 A ST. B ST. C ST. D ST. E ST.
200 F ST. G ST. H ST. I ST. J ST.
I am trying to get the following outcome.
Expected Outcome:
EmpID Address
100 A ST.
100 B ST.
100 C ST.
100 D ST.
100 E ST.
200 F ST.
200 G ST.
200 H ST.
200 I ST.
200 J ST.
Please Advice on this issue.
Thanks

user11018028 wrote:
I have the following source table and i want to convert the columns into rows.
Source Table:
EmpID address1 address2 address3 address4 address5
100 A ST. B ST. C ST. D ST. E ST.
200 F ST. G ST. H ST. I ST. J ST.
I am trying to get the following outcome.
Expected Outcome:
EmpID Address
100 A ST.
100 B ST.
100 C ST.
100 D ST.
100 E ST.
200 F ST.
200 G ST.
200 H ST.
200 I ST.
200 J ST.
Please Advice on this issue.
ThanksMy first thought would be ... search google for "oracle unpivot example".

Similar Messages

Adding a field to an sql statement in Oracle Reports error ORA-00933

We have been requested to add a field that already exists in the table referred to by the sql statement in Oracle Reports Builder. The report was set up by a consultant about 3 yrs ago and we don't really have much skill in this area. What is happening when I try to modify the SQL statement, either adding a field or deleting a field to the SELECT statement, causes an error message preventing the statement from being saved. The only way out of the error message is to click Cancel. The error message is
ORA-00933:SQL command not properly ended
ORDER BY Program ==> NAME
Even adding or deleting a space anywhere in the SQL statement causes the error (not adding any new fields). A coworker found that if we comment out the ORDER BY, the statement will accept the new field in the SELECT section, however then we lose the order by functionality. I would like to add one additional field before the FROM. Not sure if any additional data are needed. Thank you.
SELECT p.person_uid PIDM_KEY, p.id_number ID,
               p.full_name_lfmi name,
                p.BIRTH_DATE, p.GENDER Sex,
                Decode(a.residency,'D',p.Primary_ethnicity,'F') Ethn,
                a.academic_period TERM,
                CASE WHEN :p_group_by = 'PROGRAM' THEN a.program
                             ELSE ' '
                END AS Program,
                a.COLLEGE, a.degree, a.major, ' ' rule,
                a.STUDENT_POPULATION,a.STUDENT_LEVEL,    a.application_status Status, a.application_status_date app_sts_dte,
                ad.decision_date1 Last_Dec_Date,
                ad.decision1||' '||ad.decision2||' '|| ad.decision3||' '|| ad.decision4||' '|| ad.decision5 Decisions,
                /* Deposit Date uses the last term entered in :p_term parameter string */
                (SELECT MAX(deposit_effective_date) FROM usf_as_deposit WHERE account_uid = a.person_uid &term_clause group by account_uid)   AS "DEPOSIT DATE",
                ph.phone as PHONE,
                CASE WHEN PS.FIRST_CONTACT IN ('NET','PAP','COM','COP') THEN PS.First_Contact
                 ELSE CASE WHEN ps.latest_contact IN ('NET','PAP','COM','COP') THEN PS.Latest_Contact
                            ELSE ' '
                            END
                END AS FIRST_CONTACT,
                DECODE(:p_address,'Y',REPLACE(adr.street1||' '||adr.street2||' '||adr.street3||' '||adr.city||','||adr.state||' '||adr.nation||' '||adr.zip,' ',' '),' ') as address, adr.nation, adr.state,
                goremal_email_address email, a.residency, a.application_date, p.primary_ethnicity, c.cohort
FROM MST_ADMISSIONS_APPLICATION A,
           MST_PERSON p,mst_pre_student PS, Admissions_Cohort c, usf_v_phone_pr_ma ph,
           MST_admissions_decision_slot AD, usf_v_email, usf_v_address_dr_lr_ma_pr adr
WHERE a.PERSON_UID = p.person_uid
        AND a.curriculum_priority = 1
        AND a.person_uid = ps.person_uid
       AND a.person_uid = ad.person_Uid(+)
       AND a.person_uid = goremal_pidm(+)
       AND a.person_uid = adr.pidm(+)
       AND a.person_uid = ph.pidm(+)
       AND ph.rnum(+) = 1
       AND a.person_uid = c.person_uid(+)
       AND a.academic_period = c.academic_period(+)
&Where_Clause
       /*    TAKE OUT FOLLOWING LINE AFTER DATA IS CLEANED UP */
        AND NOT(p.id_number = '00000000'   OR SUBSTR(p.id_number,1,1) = 'B' OR UPPER(p.full_name_lfmi) LIKE '%TESTING%')
       AND a.application_status_date >= NVL(:p_as_of_date,sysdate-8000)
       AND a.academic_period = ad.academic_period(+)
        AND a.application_number = ad.application_number(+)
        AND a.degree <> 'ND'    /*   AND a.college <> 'LW'                         -- Does not need non-degree and law students    */
       &Cohort_Clause
ORDER BY Program &ORDER_CLAUSE

Hi Denis,
I tried your suggestion. The good thing is that adding the comma allowed me to be able to add a.campus to the select statement, unfortunately, another error message happened.
ORA-00936: missing expression SELECT p . person_uid PIDM_KEY ,
p . id_number , p . full_name_lfmi name , p . BIRTH_DATE , p . GENDER Sex ,
Decode ( a . residency , 'D' , p . Primary_Ethnicity , 'F' ) Ethn , a . academic_period TERM ,
CASE WHEN : P_group_by = 'PROGRAM THEN a I started over and tried only putting in the comma and get the same message even though I didn't add campus. After that, removed the comma which led to the ORA-00933 error message. So once again, I had to close the file without saving, in order for the report to run at all.

Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170:

Hi all,
I have an Windows XP OS with SP3.
I have installed the Oracle 11g server.
On trying to connect to the ODBC connection, i get the following error message:
Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170: TNS: Connect timeout occured
On trying the tnsping,
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 09-OCT-2
011 13:11:05
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\app\Gautam\product\11.1.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.
5.207)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl))
TNS-12535: TNS:operation timed out
On trying to connect with SQL Developer, i get the following error:
Status: Failure - Test failed: Io Exception: The Network Adapter could not establish the connection
However i am able to connect to the same using SQL Plus
Another issue that occurs is that the Oracle Enterprise Manager shows the following error after a while:
Agent Connection to Instance
Status Failed
Details ORA-12505: TNS:listener does not currently know of SID given in connect descriptor (DBD ERROR: OCIServerAttach)
The following services are all up during this point of time:
OracleDBConsoleorcl
OracleOraDb11g_home1TNSListener
OracleServiceORCL
Any help in this regard will be very useful as this is hindering the progress of my work.
Thanks in advance for the help.
- Gautam

841683 wrote:
Hi,
I did try and delete my listener.ora and then create a new one..
That did not solve my issue..
What are the steps for configuring the listener again.
Thanks for the response..
- Gautamno listener.ora file is required.
just do as below
lsnrctl start

Difference B/w all DDL statements in Oracle 8i and 9i

Where can i get the difference between all the DDL statements between oracle 8i and 9i.If anyone has this pls ..post it..

What is your national character set? What is NLS_LENGTH_SEMANTICS set to?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Case Statement in Oracle Query.

Hello Oracle Gurus,
I need suggestion on whether I should use Case statement in Oracle queries.
I have a sql statement which inserts the data by selecting data from other table. While selecting the data I have put a logic in the select statement for one column which is something like this and there are some more similar statements in the same query.
CASE
               WHEN (b.ACCOUNT = 'FIN' or b.ACCOUNT ='FIN ACC' or b.ACCOUNT like '%Global Eq%' or b.ACCOUNT like '%Flexible Bond%')
               THEN
                    'MTM'
                         WHEN (substr(a.CTC,-3)='MTM')
               THEN
                    'MTM'
                         WHEN (substr(a.CTC,-3)='AFS' or substr(a.CTC,-3)='HTM' OR substr(a.CTC,-3)='ACC' OR substr(a.CTC,-3)='HFI' )
               THEN
                    'ACC'
               ELSE
                              'OTH'
          END,
I wanted to get an suggestion about how much performance issue can I have due to this in my insert statement.
Let me know if you need any other information.All comments are really appreciated.

Hi,
It's depends on the joins how you have performed with source table, stats and existing of indexes. If the volume of data is high - in case of any performance issue - why can't you perform the required things of logical conditions of data and popualte in one cluster so - that you can fetch out the chunks of required information with better way and in support with indexes.
Let us know the ful query your working on
Oracle version
Explain plans - get it from dbms_xplan.
- Pavan Kumar N
- ORACLE - 9i/10g - OCP
RHCE - Enterprize Linux 5.4

Writing an update statement in oracle forms 9i

Hi ,
I have a problem situation in which
I am fetching values from a cursor and a recod group into two data block items text box and combo box respectively .
Both the data is fetched from different tables .
Now based on the selection from combo box I have to update the selected value in another table by writing an update statemet .
I have created a button and on the trigger event of when button pressed I wrote a simple update statement but it's not working that way .
Kindly help me how to write manual update statements in oracle forms 9i
I can't used the update buil in of forms as I want to update in a table which is not mentioned in the property pallete of data block
please help

I just wrote a procedure
PROCEDURE update_current IS
BEGIN
update table abc set xculumn= :block_name.item_name2 where ycolumn = :block_name.item_name1 ;
commit;
and I called the procedure from a when button pressed trigger
it gave an error invalid identifier abc ( which is table name)
pls help
I am trying to do it with form_ddl(update_query)
but here I am facing another problem
I have update_query = 'update table abc set xculumn= ' || :block_name.item_name2 || 'where ycolumn = '||:block_name.item_name1
now since xculumn and y column are varchar type so I suppose while preparing the query I have to concatenate single quotes ( ' ) at the start and end
but i am facing problems in doing so
please tell me an alternative way or how to concatenate single quotes in the above update_query variable

Where to run SQL statements in Oracle Database 11gR1 ?

Folks,
Hello. I have just installed Oracle Database 11gR1 and login to Database Control page. There are 4 tabs on the top: Database, Setup, Preference, Help and Logout.
I just create a table "table1" in "Database" tap. But I don't see anywhere to run SQL statement such as Select, Insert, Update.
Can any folk tell me where to run SQL statements in Oracle Database 11gR1 ?
Or
Can any folk provide a User Manual for Oracle DB 11gR1 ?

You can run from a terminal or install an SQL client and connect from there.
http://www.articlesbase.com/databases-articles/how-to-install-oracle-11g-client-1793770.html
Best Regards
mseberg
Assuming you have an oracle OS user on Linux you can try typing sqlplus at you OS command prompt. Generally you will have a .bash_profile with setting like this:
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0
#export DISPLAY=localhost:0.0
export TZ=CST6CDT
export ORACLE_SID=ORCL
export ORACLE_TERM=xterm
#export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
export NLS_LANG=AMERICAN;
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export LD_LIBRARY_PATH
# Set shell search paths
PATH=/usr/sbin:$PATH; export PATH
export PATH=$PATH:$ORACLE_HOME/bin
# CLASSPATH:
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
CLASSPATH=$CLASSPATH:$ORACLE_HOME/network/jlib
export EDITOR=vi
set -o vi
PS1='$PWD:$ORACLE_SID >'Edited by: mseberg on Jul 11, 2011 3:18 PM

Need help converting Excel IF statement into CASE WHEN statement for Oracle

Hi,
Hope someone can help I have tried various ways of getting this to work, to no avail!
Bascially I have some figures that are minus figures, and I need to add them together to get a movement figure, but I need to treat the minus figures as minus, if that makes sense, rather than the usual... a minus and a minus makes a plus.
For example:- Budget Figure = -1% and Actual Figure = -68% so the movement needs to be -69%.
The IF statement I have been using in Excel is the following:-
=IF(FO110<0,(FP110-(IF(FO110=0,1,FO110)*-1)),FP110-IF(FO110=0,1,FO110))
Which when using the figures as above = -69%
Cell FO = The Budget Figure
Cell FP = The Actual Figure
However, when I created the CASE statement in Oracle, the figure in the query comes back as -0.67, which is oviously not what I want to happen when both actual and budget are minus figures; however when they are a minus and a plus, it works perfectly fine.
Any help on this would be most appreciated!
Kind regards,
Annmarie

Happy I did'n mess something up :)
Nevertheless, don't show it too much around because
case when budget < 0
     then actual - case when budget = 0 /* will never happen */
                        then 1           /* will never happen */
                        else budget
                   end * (-1)            /* -budget * (-1) remains only */
     else actual - case when budget = 0
                        then 1
                        else budget
                   end
endso at least try the following (if case is more readable as decode for you). Let's hope it works as I don't have a Database at hand
case when budget < 0
     then actual + budget
     else actual - case when budget = 0
                        then 1
                        else budget
                   end
end Regards
Etbin

Convert sql select statement to oracle

Hi All,
Can anyone help me converting this Sql select statement to oracle ....
-----------------------------------------Query--------------------------------------------------------------
select emp_master.emp_code ,
emp_master.dept_cd ,
attendance_master.daily_attn_code ,
attendance_master.linked_column ,
case when location.payroll_status <> 'N' and eDocsNetEmployeesLeave.StartDate < dateadd(mm, 1 , convert(smalldatetime, datename(yy ,location.next_pay_date) + '/'+ datename(mm ,location.next_pay_date)+ '/01'))
then
dateadd(mm, 1 , convert(smalldatetime, datename(yy ,location.next_pay_date) + '/'+ datename(mm ,location.next_pay_date)+ '/01'))
when eDocsNetEmployeesLeave.StartDate < convert(smalldatetime, datename(yy ,location.next_pay_date) + '/'+ datename(mm ,location.next_pay_date)+ '/01')
then convert(smalldatetime, datename(yy ,location.next_pay_date) + '/'+ datename(mm ,location.next_pay_date)+ '/01') else eDocsNetEmployeesLeaveDetails.StartDate
end ,
eDocsNetEmployeesLeaveDetails.NoOfDays,
case when eDocsNetEmployeesLeave.StartDate > location.next_pay_date
then convert(datetime , convert(varchar, dateadd(ss,-1, dateadd(mm, 1, convert(datetime , datename(yy,eDocsNetEmployeesLeave.StartDate)+ '/' + datename(mm,eDocsNetEmployeesLeave.StartDate)+ '/01') )),106) )
else
case when location.payroll_status <> 'N'
then dateadd(mm,1,location.next_pay_date)
else location.next_pay_date
end
end as PaymentDate               ,
isnull(grade_master.leave_type,'C') ,
eDocsNetEmployeesLeave.StartDate ,
eDocsNetEmployeesLeaveDetails.LeaveType
from eDocsNetEmployeesLeave ,
eDocsNetEmployeesLeaveDetails ,
eDocsNetLeaveTypes ,
emp_master ,
grade_master ,
attendance_master ,
location
where eDocsNetEmployeesLeaveDetails.RequestID     = eDocsNetEmployeesLeave.RequestID and
eDocsNetEmployeesLeave.EmployeeID = emp_master.emp_code and
eDocsNetEmployeesLeaveDetails.LeaveType = eDocsNetLeaveTypes.LeaveTypeID and
eDocsNetLeaveTypes.loc_cd = emp_master.loc_cd and
location.loc_cd = emp_master.loc_cd and
attendance_master.loc_cd = emp_master.loc_cd and
attendance_master.linked_column = eDocsNetLeaveTypes.LinkedAttendance and
grade_master.loc_cd = emp_master.loc_cd and
grade_master.grade_cd = emp_master.grade_cd and
eDocsNetEmployeesLeaveDetails.RequestID      = @RequestID
order by eDocsNetEmployeesLeaveDetails.StartDate
Thanks in Advance
Smiley

Seems like you want to convert a SQL statement from the ??? dialect to the Oracle dialect. *(It would be useful to indicate the non-ANSI standard SQL you are starting with.)
Part of the problem is that you use several date related functions. Some are unnecessary in Oracle and some need to translated into Oracle functions as found in the Functions section (chapter 5) of the SQL Reference manual at http://www.oracle.com/pls/db102/homepage
Note that columns and expressions of type 'date' in ORacle always contain all of "yyyy mm dd hh mi ss" and you need to format and trauncate as necessary.
Also note that '09-JAN-31' is NOT an Oracle date, but rather a character representation of a date which must be converted to/from a date expression. You will often need to use the to_date() and to_char() functions with a format mask as the second parameter. This is also descreibed in the first 2 chapters of the SQL Reference manual.

Maintaining persistent client state in Oracle 8.1.6

I'm running Oracle 8.1.6 on Windows NT 4.0.
What are the methods to maintain the state of HTTP session (variable values, maybe transaction state) between the requests of the same user, in other words, how can I maintain HTTP session state in Oracle 8.1.6?
It's preferable to avoid using cookie, but I'll be very grateful for any advice.
Thanks in advance, Alex.

Here's my Javascript Code for writing the Cookie (adapted from www.webmonkey.com):
Htp.p('<script language="JavaScript"></script>
<script language="JavaScript"></script>');
Now here's my PL/SQL code for reading it:
t_cookie := owa_cookie.get('cotavalor');
Simple. I had to write that Javascript cause the Functions provided by Oracle didn't seem to work at all, while the Javascript version works easily.
null

Cancel long running statement in Oracle Lite (OLITE_10.3.0.3.0 olite40.jar)

On JDBC statement, there is the method 'cancel' to instruct the database to cancel an executing statement. This works fine on Oracle server database, but not on Oracle lite database. The method call 'cancel' just blocks and the running statement is never interrupted.
The example I tried is very simple. There is a thread started which executes a long running statement. I noticed, that when moving the cursor forward by calling rs.next(), it just blocks. That would be ok, if the statement could be canceled from within the main thread by stmt.cancel. But this call blocks as well with no implact on the running statement. Why is that? Do I miss something or is it not possible to cancel a long running statements in Oracle Lite?
In the following my code snipped:
public class CancelStatement {
     private static final String PATH_DB = "XX";
     private static final String PATH_LIB = "XX";
     private static final String CON_STRING = "jdbc:polite:whatever;DataDirectory=" + PATH_DB + ";Database=XX;IsolationLevel=Read Committed;Autocommit=Off;CursorType=Forward Only";
     private static final String USER = "XX";
     private static final String PASSWORD = "XX";
     public static void main(String args[]) throws Exception {
          System.setProperty("java.library.path", PATH_LIB);
          Class.forName("oracle.lite.poljdbc.POLJDBCDriver");
          Connection con = DriverManager.getConnection(CON_STRING, USER, PASSWORD);
          Statement stmt = con.createStatement();
          Thread thread = new Thread(new LongStatementRunnable(con, stmt));
          thread.start();
          Thread.sleep(3000);
          // stop long running statement
          System.out.println("cancel long running statement");
          stmt.cancel(); // XXX does not work, as call is blocked until out of memory
          System.out.println("statement canceled");
     private static class LongStatementRunnable implements Runnable {
          private Connection con;
          private Statement stmt;
          public LongStatementRunnable(Connection con, Statement stmt) {
               this.con = con;
               this.stmt = stmt;
          @Override
          public void run() {
               try {
                    System.out.println("start long running statement...");
                    // execute long running statement
                    ResultSet rs = stmt.executeQuery("SELECT * FROM PERSON P1, PERSON P2");
                    while (rs.next()) { // here the execution gets blocked
                         System.out.println("row"); // is never entered
                    rs.close();
                    stmt.close();
                    con.close();
                    System.out.println("long running statement finished...");
               } catch (Exception e) {
                    e.printStackTrace();
}I would be very glad if you could help me.
Thanks a lot
Daniel
Edited by: 861793 on 26.05.2011 14:29

Unfortunately Oracle Lite doesn't have this option. You can call your statement from a second thread as you have done, but you won't be able to kill or cancel this operation. The only way to get fix this is by rebooting. You can use process explorer to find the dll process that is executing the SQL, but the tables will be locked and sync would be locked as well until the process is finished running in shared memory.

I want to know when we issue truncate table statement in oracle .

i want to know when we issue truncate table statement in oracle .No log will be write in redo log .But we can recover data using flashback or scn.I want to know where is the actually truncate table statement log is stored in oracle database.Please explain me in detail step by step .

Hi,
I have truncated table after that i have restored that data.See below the example.I want to know from where it's restored.
From which log file it's restored.
create table mytab (n number, x varchar2(90), d date);
alter table mytab enable row movement;
Table altered.
SQL> insert into mytab values (1,'Monsters of Folk',sysdate);
1 row created.
SQL> insert into mytab values (2,'The Frames',sysdate-1/24);
1 row created.
SQL> commit;
Commit complete.
SQL> select CURRENT_SCN from v$database;
CURRENT_SCN
972383
SQL> select * from mytab;
N
X
D
1
Monsters of Folk
30-DEC-12
2
The Frames
30-DEC-12
N
X
D
SQL> set lines 10000
SQL> /
N X D
1 Monsters of Folk 30-DEC-12
2 The Frames 30-DEC-12
SQL> select to_char(sysdate,'yyyymmdd hh24:mi:ss') from dual;
TO_CHAR(SYSDATE,'
20121230 09:29:24
SQL> set timing on
SQL> truncate table mytab;
Table truncated.
Elapsed: 00:00:15.75
SQL> select * from mytab as of timestamp TO_TIMESTAMP('20121230 09:29:24','yyyymmdd hh24:mi:ss');
N X D
1 Monsters of Folk 30-DEC-12
2 The Frames 30-DEC-12
Elapsed: 00:00:00.28
SQL> insert into mytab select * from mytab as of timestamp TO_TIMESTAMP('20121230 09:29:24','yyyymmdd hh24:mi:ss');
2 rows created.
Elapsed: 00:00:00.01
SQL>

Capturing Print Statements from Oracle SP in Java

Hi all,
Greetings...
I have one query...pls find below the info for the same:
From my Java application, i am calling Oracle SP using Callable Statement.
Here is the simple Oracle SP..
01. CREATE OR REPLACE PROCEDURE TEST_ORACLE(errcode OUT
02. NUMBER, errdesc OUT CHAR)
03. AS
04. BEGIN
05. dbms_output.put_line('Start of the SP');
06. // SQL Statements will come here
07. dbms_output.put_line('End of the SP');
08. END TEST_ORACLE;
In Line (5) and (7), I have given Print Statements (SOP statements). I need to capture those SOP messages from Java while executing SP / after exceuting it.
In the Java application, i tried the following:
callableStatement.execute();
SQLWarning warnings = callableStmt.getWarnings();
while(warnings != null)
if(warnings.getErrorCode() == 0 && warnings.getSQLState() == null)
System.out.println("Print Statements From SP: "
+ warnings.getMessage() );
warnings = warnings .getNextWarning();
Here warning object is null and i am unable to capture those print statements.
How to capture those print statements from Oracle SP in Java ?
Thanks in advance..
Regards,
Manikandan

Try writing them to a file and read them from your program.
Regards,
Carol.

Web application session state in Oracle

In .Net 2.0, it is possible to store session states of web applications in other databases than SQL Server. Does any one have stored session state in Oracle? What should be done?
Thanks

For best results, try posting this to the ODP.NET discussion forum.

The status and statement about Oracle embrace JavaServer Faces

Hi all:
Have any expert could talking about the status and statement about Oracle embrace JavaServer Faces standard,
whether Jdeveloper 10g have full support this standard now, and UIX direction ?

development based on oracle technology and tool, If we wish adopt JavaServerFace technology, we should direct using Sun Java standard library or oracle UIX technology,
give us some suggestion, how to start JavaServerFace application development ? is start from UIX ? and what is learning step ?

Unpivot statement in oracle

Similar Messages

Maybe you are looking for