Unplanned depreciation in FI Fixed Assets does not post to FI-GL

We used transaction ABAA (unplanned depreciation) movement typ 640 to post a depreciation amount - The document has been posted in the AA module ( it is now showing against the Asset in the transaction Asset Explorer transactions AW01N and AB03) however we do not manage to get it posted to FI and consequently have a reconciliation difference between the value in the AA module and the FI-GL.
Can anybody please give advise how we can correct this?
We tried following so far:
(1) post the unplanned depreciation document using transaction AFAB - depreciation posting run.
No documents created.
The message log displays "You want to run the next planned run of the depreciation posting run in period 014. However, the last planned posting run was already performed for period 014."
Than tried to execute the transaction with selection 'repeat' , 'restart', 'unplanned depreciation run': no documents posted either ......
(2) reverse the unplanned depreciation document using transaction AB08
This failed; the system reports following
"No FI document was generated for the asset transaction" and subsequently after clicking the 'post'button' an error"No unique header information transferred into Accounting
Message no. RW001
Diagnosis: The interface into Accounting requires:
Header data
Item data
Currency data
The header data is missing, or several items were transferred.
System Response
Processing of the data in the Accounting interface is not possible.
Procedure
This is a system error of the application which was called up
So..............No idea how to get rid of this document.
Can anybody help?
Kind Regards,
Arjan

Hi Suresh,
Thanks for you feedback.
I had already tried your suggestion; it was the actions which I mentioned under the point (1) in my message.
The system did not generate any FI document, this is exactly the unexpected problem that I am trying to solve.
Any further suggestions?
Kind Regards,
Arjan

Similar Messages

Deactivate a depreciation area (Real area but does not post)

Hi Guys
I want to deactivate a depreciation area.
It is a real depreciation area but area does not post in GL.
Is there any risk in deactivating the depreciation area in the asset class ? We do not want to use this area any more '
Thanks

Thanks Anil
But my question is
Should I only have to deactivate the depreciation area in the asset class OAYZ ? In this case new asset won´t see this depreciation area , but old asset still show this depreciation area in AS03. It seems no issue with this approach.
Someone has suggested me also to deactivate it in OABN (but this depreciation area did not post) If I untick ordinary depreciation field in OABN when I go to the asset I have an error message:
"You cannot manage ordinary depreciation in area 60
Message no. AA656
Diagnosis
According to Customizing settings, ordinary depreciation cannot be managed in area 60. The posting being processed changes ordinary depreciation.
Procedure
Check the amount entered and the transaction type."
So, what is the safety procedure just go to OAYZ (I think this is the right way) and unclick the field "deact" ?
"Indicator: Depreciation area is deactivated
Set this indicator if you want the depreciation area to be inactive in this asset class or asset (although it is defined in the chart of depreciation)."
Any other suggestion ?
Regards

How to repeat depreciation run for fixed assets

Dear Sir(s),
we are on SAP B PL03. We would like to re-run depreciation for some fixed assets to correct a previous depreciation run which was executed by mistake. The depreciation was posted to the GL accounts.
We are not able to get this option of re-running the depreciation even after changing the depreciation types of these fixed assets in the fixed asset master data. The depreciation run screen just displays a list of all previous depreciation runs.
Asif

Hi Asif,
The last depreciation you have run showing you in depreciation window,that depreciation you executed by mistake van remove by right click on that depreciation row and remove that row. Doing this your financial posting will be reverse then you can execute depreciation for the same period.
Thanks

Calculate Depreciation Forecast for Fixed asset

Dear all expert,
I'm new to ASO, would like to know if there's a way to do depreciation forcast for fixed asset in Essbase.
1. Database type is ASO
2. Assuming user will prepare forecast caplitialization of fixed asset then upload to Essbase
3. Attribute dimension "Useful life" has been defined and attached to specific "Accounts" dimension for calcluation
4. Need to calculate the forecast and spread of depreciation for future months
E.g. Input 32000 USD for a fixed asset cost with 32 months useful life
-> should calculate 1000 each month for the coming 32 months
Can any expert suggest how to do this in ASO? meaning only can do calculation in member formula itself, not calculation script.
Thanks for your help in advance,
Billy

I haven't used the feature, but the reference to 'local script_file' in the MaxL railroad diagram for the 'execute calculation' command suggests the location is relative to the client, if the semantics are consistent with the 'export data' command (the options for report scripts there are 'server' or 'local', although according to the railroad diagram there is no non-local alternative in this case!).
There is a worked example in a Rittman Mead blog post about this that might help: http://www.rittmanmead.com/2010/04/oracle-epm-11-1-2-essbase-calculations-on-aso-cubes-part-2-maxl-scripts-and-eas/
The DBAG also says that the script files should have suffix .csc, while the Tech Ref example has suffix .txt - helpful!! If they were actually meant to sit in the server's db directory, I would be surprised to find the .csc suffix used, since that is also the suffix for aggregation scripts. Although me being surprised doesn't mean much.

Group asset does not manage area 01-Msge no. AA809 in AW01N-Parameter Tab

Hi All,
For my Client in Development Server,
When i select Parameter Tab- in t.c.AW01N.
The below error message is coming for all Asset Classes Assets.
Group asset does not manage area 01
Message no. AA809
Diagnosis
You have specified for the asset that depreciation area 01 is to be managed in group asset . However, depreciation area 01 is not managed on the group asset level.
Procedure
Correct your entry.
I have checked in
1.Specify Depreciation Areas for Group Assets(T.C.OAYM),
For depreciation area 01-Group Asset check box is not selected.
2. Specify Asset Classes for Group Assets(t.c.OAAX).
In this screen for all Asset Classes(except Group Asset Class), check boxes are not selected(for class consists entirely of group assets).
Please any one guide me how to solve this issue.
But there is no this type of error in Production Server.
Thanks in Adv

Hi
there has been a simular problem, this might help you:
This asset has 4 depreciation areas all attatched to Group asset
1665265. But, this group asset has only 3 depreciation areas. When you
would double click on Asset 1665268, you would come across Error Msg
AA809.
Group asset does not manage area 10
Message no. AA809
Blaz

Asset does not exists

Hi Sap Guru,
When I am executing AJAB closing asset fiscal year, i got error message. From error log i found the below error.
asset xxxxxxxx x Depreciation/updating of values has errors.
When i checked the above asset in same company code xxxx, i found that this asset does not exist. Also I checked in the tables, I did not find the same asset entry in table except in table ANLC,ANLP. I don't know who and how it removed from system. Now i can not perform year end closing. Could anybody tell me how to create this asset with same number or execute the year end process by excluding these assets. Thanks in advance.
Best Regards,
Prakash

Dear Prakash,
you said that there are no table entries except in table ANLC, ANLP.
So we have 2 possibilities:
- delete the table entries completely and create a new asset.
- recreate the missing table entries.
regards Bernhard

ABNAN- Posting not possible (Asset does not manage postable areas)

Hi Experts,
I am trying to do a post capitalization creating a new asset using transaction ABNAN with the transaction type 400.
I get the Error " Posting not possible (Asset does not manage postable areas) "
Can some one help me with this.
Thanks in Advance
Vijayanth

Dear,
Check Asset master if it has depreciaiton areas activated.
Regards,
Chintan Joshi.

FTXP-error-Domain MWART fixed value does not exist- Message no. F4341

Hi,
I am trying to created a new record for a tax code, and i get this error
Domain MWART fixed value does not exist
Message no. F4341
I looked up OB40, and not sure how to fix this. Do you know how to check the tax codes? How to validate OB40?
Thanks.

Hello,
Please follow this procedure for the input tax codes which experience
the error F4341:
1) Go to SE16 and enter table T007A
2) Hit enter and in the next screen choose the following parameters
   and enter values that represent the tax code for input tax which are
   encountering the problem.
   KALSM (tax procedure)
   MWSKZ (tax code)
3) Click on the "execute" button.
4) Take special attention to column MWART which represents tax type.
   This should only have a value "V" to represent input tax (or "A" if
   output tax).
5) The cause of the error F4 341 is when this column does not contain
   any value or is blank. Which means that there is no defined tax type
   "A" or "V" maintained in customizing.
6) To correct this you should maintain the value again via FTXP for the
   corresponding tax codes and complete all the customizing settings
   relating to tax on sales and purchases thereunder. Afterwhich you
   should no longer experience the error message.
Regards,
REnan

Cannot mark the 'site' location of instances fixed, Bel does not match

Hello,
i have a problem using the PlanAhead Tool (v.14.5) from the ISE (v.14.5).
First of all, i have loaded an .ucf-file to define various IO for the Design. After that, i have createt a pblock for some part of the design, which also includes some of the previous mentioned IOs. I said to PlanAhead, that it should use the IO as predefined. The design compiles without error and works quite fine.
The next step for me now is to lock the pblock, which means to fix the instance, so that the compiler does not have to re-map and -place&route this part of the design. (so i try to fix the part of the netlist)
And if i try to do this, i get different errors:
- marking the whole pblock and right click --> fix instances i get the following error:
Cannot mark the 'site' location of instances fixed, Bel does not match
with the valid locations at which this inst can be placed
So i searched for this special problem and found this:
Vivado Solution which seems to be a bug in the PlanAhead software from Vivado. My question is : is in my PlanAhead ISE version the same bug ?
(copying and typing the same command in the tcl console does not work)
- Second: i tried to manuel set primitives to "fix instances" which works quite fine for most of the primitives but not for all. Some of these produce errors like:
Cannot mark the 'bel' location of instances fixed, 'Element
SLICE_X66Y112.B5LUT can not be used as a route-through for net xy
because a RAM or shift register is placed there'
Is it still a bug, can i somehow resolve this error ?
I hope you can help me out here.
Best regards.

Hello,
thanks for your answer.
I send you the two ucf files:
The first one is the "original" ucf used to define the constrains (I/O,...) and the second the one PlanAhead has generated (but with no "fixed instances") .
Thanks

K9N2 plat does not post

I have been having multiple issues with my system and I later determined that it was the power supply. I replaced the PSU and I also got a new case in the process. I installed everything in the new case including the PSU. I turned it on to test the system before I put all the USB stuff and peripherals into the mobo and it works good, everything is normal, but once I hooked all my peripherals like my keyboard, mouse, monitor it completely stopped posting the little LEDs are all red and the speaker does not make a beep. I unhooked it all and the problem still persisted. Then i took out my GPU and tried to turn it on and still and the LEDs are red I took out the mobo out of the case took all but one stick of ram off the mobo and hooked it up to the PSU and still it does not post, and the LEDs are still red. Can someone tell me how to fix this problem or do i need to get a new mobo all together?

Read the posting guide as Stu says and post your system specs.
To start with clear the CMOS: >>Clear CMOS Guide<<

Work order to cost center settlement does not post to GL module (FI)

Dear Expert,
I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
Please advice.
Thank you.
KH

Hi Kiran,
The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
Change the cost center from period in the past date and try.
BR, Srinivas Salpala

FSCM 9.0: COBOL Process GLPPPOST does not post Journal Entry correctly

Folks,
Hello. I am workin on FSCM 9.0 General Ledger module. "Edit Journal" is AE program that works correctly. But "Post Journal" is a COBOL program that does not works correctly.
COBOL process GLPPPOST posts only debit accounts of a Journal entry into table PS_LEDGER but does not post credit accounts of a Journal Entry into table PS_LEDGER. When run the Ledger Report, the report has only column headers and has no data.
Does FSCM 9.0 have a problem or COBOL process does not work correctly ? Can any folks help me ? Thanks.

Folks,
Hello. Thanks a lot for replying.
I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
"Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

HP MS218 Not Booting - Does not POST - Cannot reach BIOS

Hello,
I have an MS218 (product number: BR372AA #ABA) that I have been having issues with. It used to work fine (ran on WinXP), but currently will not even boot properly at all. No software or hardware changes were made to cause this problem to begin occurring, it simply just started happening one day when I went to turn the computer back on. The issue that I am currently experiencing is as follows:
- Power stays on, but nothing is ever displayed on the screen
- Does not post, cannot reach BIOS
- Acts almost as if it is resetting itself constantly, the fan in the back will start to spin for a second or two, then stop, then start again, and repeat indefinitely until I unplug the power adapter.
I initially figured it was a hardware issue, likely the motherboard, and began to troubleshoot the problem. As I removed non-vital components, the problem would persist. For instance, it happens regardless of external things (keyboard, mouse, etc.) being plugged in, or regardless of the hard drive or optical drive being plugged in. It still appears to happen in the absense of memory, however, I will instead hear beep codes (likely telling me that I don't have any RAM in). Ultimately, I decided to order a replacement motherboard, which recently arrived. Upon replacing the motherboard, the exact same problems happen, which leads me to believe that the motherboard was somehow not the culprit. I have also tried multiple power adapters to no avail, as well as resetting the CMOS battery without any luck. I'm really at a loss for what to do from here, and am currently sitting on hold with HP tech support.
Any advice is welcome. Thanks in advance for your time and assistance.

Hello Jaycera,
There are two more components that we haven't replaced or look at and I would approach them in the order listed.
1. Power supply
2. Processor
It sounds like it's a power issue the computer is getting enough power to start booting up and then losing it. Thus anytime I hear a power issue the first thing I think of is a power supply issue.
The other thing is it could be the processor. The computer starts booting, makes a call to the processor, fails, boots down, starts booting up, makes a call to the processor and here we are in a vicious cycle.
It could just be the processor needing reseated. Take it out, put it back in and make sure it's in properly and no pins are bent, or the processor could be bad.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

After I upgraded to OS x 10.7.5 my Mail account does not post mail, how come?

After I upgraded to OS x 10.7.5 my Mail account does not post mail, how come?

No. Tried all that. Server finally says they don't understand what's happening so better if I just delete accounts and set them up again from scratch. Haven't done that yet in hopes someone in the Apple world will have found a solution.

System does not post after Bios Flash

After using Live Update to flash my Bios to the new version, the computer does not POST. The Bios Flash was successful - it rebooted and started normally. When I tried to restart it the normal way, it will not boot. The fans run when the "power on" button is pressed but nothing more. I cleared the CMOS using the jumpers but the problem was not solved. Can any one help?
Can some good Samaritan give me a step by step method to resolve this problem?

I followed the link you provided and managed to resolved it:
1) Removed one memory stick and floppy;
2) Cleared CMOS and rebooted successfully;
3) Inserted floppy and reverted to the previous BIOS;
4) Inserted the other memory stick and brought system back to full power again.
Thank you very much for your assistance. I am sure MSI is aware of the problem and will take steps to rectify it ASAP

Unplanned depreciation in FI Fixed Assets does not post to FI-GL

Similar Messages

Maybe you are looking for