Unplugged Ipod accidentally, caused all data to not show when reconnected
I accidentally disconnected my Ipod (knocked the cable)this wasn't done during a actual transfer. But when reconnected none of my songs,video or play list show up on the ipod, both when connected to the PC (software) or not. I've done a reset on the ipod and restarted the software (pc) run a disk error check....... HELP............. the drive shows theres 24gigs used. How do you fix/restore the file system on the ipod..... any Help would greatly be appreciated.
See: How to restore the iPod to factory settings.
After that, reload the music from iTunes.
Similar Messages
-
when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.
Dropbox "Camera upload" option just rename the files and looks like this.
-
Data is not showing when condition is applied
Hi All,
I have a small query. Am trying to use a if condition to achive the following:
If the Exchange rate is 1, then I need to concatinate the revenue field with $.
And if it is not, then concatinate it with #. Exchange rate is another column in the same group.
I tried using the following:
<?xdofx:if Petrofac-PTSExchangeRate=1 then concat('$',Revenue)
else concat('#',Revenue) end if?>
But it is not showing me any result in the revenue column.
Any Ideas?
Thanks in advance,
Imtiaz.Use xdoxslt functions instead.
<?xdoxslt:ifelse(Petrofac-PTSExchangeRate='1',concat('$',Petrofac-USDXRate),concat('#',Petrofac-USDXRate))?> -
Firefox 19.0 PDF data is not showing when we use the Preview in firefox option.
I am using FireFox 19.0 Version. In my application, I create the adobe PDF and it should shows on click on link button. On previous version it was working. but in 19.0 it is not working.
In Firefox option i am using preview in firefox option to show the PDF on browser tab.
Please suggest how can i resolve this problem.These solutions to not help our viewers who also have this problem. All they know is the pdf is not displaying correctly and naturally assume there is something wrong with the pdf.
This function should be disabled until it reliably displays pdfs. -
Date not showed when report is viewed in PDF .
Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now. -
I lost all data in "notes" on both my iPod Touch and my new Ipad within minutes of each other. How can this happen?
Where were the devices doing since the content was there and when you found it missing?
DId you power it off ond then back on?
Did you reset the iPod?
I would try resertting the iPod. Noting is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
I accidentally changed all dates of all events, how do I correct it?
Hi,
I accidentally changed all dates of all events, now my entire library of 17000 pics is messed up. Fortunately I have the luxury of two backups: time machine and old Toad's iPhoto dB Backup. Which one should I use, to get back were I was?
Thank youIf you trust the TM version, delete the current library and then restore the TM version. Or, get an external HD or connect to another Mac to temporarily store the current version.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Help ... I've accidentally deleted all data of my user in the terminal. what to do? Can i undo the commands?
greetings from austriaYou cannot undo commands. When you delete/remove files with the rm command the files are not put in the trash where they could be recovered. They are gone.
You should have your system backed up with Time machine and/or backup clone of your system. Use them to recover you files. -
Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!
Try this previous discusssion:
https://discussions.apple.com/message/12518406#12518406 -
Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?
What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often. -
After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.
Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved. -
My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English
Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
(You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
Having made the break myself some years ago, I'd recommend you break away from Windows. ;-) -
My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?
Hey, Thanks a lot. It took quite a bit of time to resurrect this ipod. I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new. This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted. Finally, it recognized my ipod and started to download each song. It took awhile as there was 602 songs, but finally it works. Yea!!! I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information. This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone. Take care, Karen
-
Data is not showing up in report on ODS
Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
SirishaIn this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond
Maybe you are looking for
-
Error deploying a .ear file - Urgent
Hi, I am trying to deploy an .ear file on the SAP J2EE engine. I am getting a NoClassDefFound exception even though the particular jar (xml-apis.jar) file containing the class is in the additional-lib directory. Also, the jar file has been added to
-
Context lookup problem in iplanet application server 6.0 sp3?
Hi all, I am writing codes in the following enviornment, iplanet application server 6.0 sp3 with iplanet web server 4.1 sp7 in Window 2000. When I tried to login to the system, error occured when i try to lookup context for my session bean. The error
-
Restrict certain fields after a digital signature
I am using Acrobat XI Pro. I have added a digital signature field. Then >properties>signed tab>mark as read only>just these fields. When I click to select the fields I want, they don't check. I can "select all" and then they all check, but if I c
-
Photo RSS reader for PC's / AOL?
Can anyone suggest an RSS reader that will read photos from a photocast? My father uses AOL, but could work through IE if necessary. Thanks, Billl
-
Please Help - DB13 All Jobs Are Failed
Hello Gurus, My Qurey Was In T-Code DB-13, I created some Jobs example like checkdb, update stats, etc etc while running this jobs giving me this error can anybody tell me what is the rectification or what is a needful to solve this problem Job start