Unprocessed Outbound Queues on SMQ1 with Status NOSEND...

Dear Experts,
We have following 4 Queues which have NOSEND status:
BW0110BPARTNER_ATTR
BW0110BPARTNER_TEXT
BW0110BP_DEF_ADDRESS__A1
BW0110CRM_SALES_ACT_1
I cannot unlock this and activate these as the system displays message: LUWs in status NOSEND must be picked up by the application.
I need your help to know how to process these queues.
Best Regards, Murugesh

Hi Murugesh,
    The four queues that you have mentioned are BW specific queues. These cannot be unlocked or activated from the CRM system. For BW queues in CRM, it has to be processed or called from the BW system. BW queues will always be in status 'No Send' in the crm system unless and until it is called by the BW system.
Regards,
Ratish

Similar Messages

  • Deleting Outbound Queues in SMQ1

    Dear Experts,
    System landscape: ECC 6.0, SRM 5.0
    I started intial load using DNL_CUST_PROD1 in R3AS and my outbound queue in SMQ1 (ECC) contained an SYSFAIL status. So I would like restart the initial load again from SRM.
    Can you please let me know if I need to delete this outbound queue or resetting the status to READY is enough.
    If I need to delete the queue, can you please let me know how to delete this outbound queue.
    Points will be rewarded.
    Thanks in advance,
    Bob.

    Hi Bob,
    I'm not sure if I completely understand your question.
    You can delete the outbound queue and start the initial load again. In order to do so, just select the queue (click on it once) and then select the trash can icon on the top left side. Or else you can just right click on the queue and select the "Delete" option.
    Hope this helps!
    Thanks,
    Aravind

  • Outbound queues are in ready status

    Hi,
    In our system outbound queue are getting stuck in READY status. They are not getting executed automtically from READY status we have to manually exceute them in SMQ2.
    How i can clear the queue which are in  READY status.
    Thanks & Regards,
    Koushal Solanki

    Hi,
    Please check if there is any standard background job available to schedule it to run for every 5 or 10 minutes so that it will check the queues with Ready status and then execute them automatically. Also, check the reasons why jobs are coming to Ready status.
    Regards,
    Sharath

  • Outbound Queue in ECC with CRM Destination

    Dear experts
    In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
    I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
    What are the settings to avoid this outbound queue to be created?
    Thanks in advance,
    Regards, Stephanie

    Hello Stephanie.
    Please remove the following table entry in your ECC system:
    TBE31 (Application components by Publish & Subscribe interface)
    - The following entries must exist for a successful data exchange:
                     Event            00501014
                     Obj.class        BUSPROCESSND
                     Fmodule          CRS_SALES_COLLECT_DATA
       Also see Note 490932.
    Best regards,
    Maggie

  • Deleting an outbound queue SMQ1

    HI,
    Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
    Kind regards,
    Mike

    Hello Mike,
    This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
    Apart from that , no issues

  • Urgent help- How to open Outbound queues

    Hi,
    I am new to SCM-APO, we have SCM 5.0 having CIF to R/3 4.7 Enterprise.
    In SMQ1 i can see lot of outbound queues present with status NOSEND in R/3.
    I want to push these queue manually how shoild i do it
    Please guide me as i m new to this area.
    Thanks
    Amit

    Hi Amit,
        Go to Transaction /n/sapapo/ccr i.e.CIF Comparision/Reconcillation of Transaction Data. then Click on
    Execute Comparision/Reconcillation Tab. Then Enter Parter System i.e ECC,then Proudct & Location.then Select Document to be checked like Production Order i.e Mfg Ordrs(with Reqs/Receipt , with Opernations),Planned Order,Purchase order etc. which you want to Transfer in ECC concern to the Product.Then Execute the Transaction.
       You will find Transaction data & result Documnet.Open the Transaction Data i.e Mfg Orders or Planned Orders.Then double click on Requirements/Receipts or Operations.You will find the objects in right hand side.Select all the objects & push in to R/3 with Push button R/3.
    Hope so it will help you to solve your problem.
    Regards
    Sujay

  • Outbound queue : no process

    Hi all,
    We have CRM 4.0/Oracle/Windows OS, and after a client copy, I've tried to execute some processes that generate a outbound queue, but the entries still there with status "NOSEND", I found a SAP note about this problem, but it's not the same case, I tried to activate one of those queue, but nothing happen, can you please advise, and thanks in advance.
    Best regards,
    Aziz

    Hi,
    see if this can help you.
    NoSend status for a queue
    <b>"LUWs of this queue are never sent but retrieved by a special application. These queues are only used internally at SAP (BW or CRM during communication with Mobile Clients). Even if a LUW has been read by the corresponding application (BW, CRM), this status does not change. This LUW is only deleted from the queue if this application confirms collection (collective confirmation possible). Under no circumstances should this status be reset using transaction SMQ1 and the queue activated."</b>
    Regards,
    Smitha
    Message was edited by: Smitha Rao

  • CRM 5.0 outbound queues to Mobile sales

    Hi all,
    We have upgraded from CRM 3.0 to CRM 5.0.
    I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
    But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
    Does this mean no data is actually being passed from CRM to Mobile Sales.
    At this point of time  I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
    Thanks.

    Hi KP,
    This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
    Regards,
    Ankan

  • Detected Blocked Outbound Queues

    Hi All,
    We have found  detected Blocked Outbound Queues in SMq1 CRM PROD System and we have checked log , its shows below log.
    400 R3AUBUPA0008063715       RP1CLNT400                               4  CPICERR  A3A4176F143C4F3031E8C711 06.02.2012 20:02:48
    400 R3AUBUPA0008063722       RP1CLNT400                               4  CPICERR  A3A4177004E04F3031E9148F 06.02.2012 20:02:49
    400 R3AUBUPA0008063751       RP1CLNT400                               4  CPICERR  A3A4176F174C4F3031E9C4BB 06.02.2012 20:02:49
    400 R3AUBUPA0008063753       RP1CLNT400                               2  CPICERR  A3A4177002984F3031EA5DFE 06.02.2012 20:02:50
    Status shows CPICERR ,Error when opening an RFC connection .
    But i have checked  RP1CLNT400 test connection is successful .
    Kindly suggest .

    Hello,
    Check the following notes:
    [378903 Queue status in SMQ1, SMQ2 and table ARFCRSTATE|http://service.sap.com/sap/support/notes/378903]
    [430980 CRM Server: Analysis in delta data exchange R/3->CRM|http://service.sap.com/sap/support/notes/430980]
    Regards,
    Eduardo Rezende

  • Need to know how to check the outbound queue in SAP for data flow into CRM

    Hi Specialist's,
    I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
    I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
    Is there any other way in SAP that i can check?
    Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
    Usefull answers will definitely be rewarded with points .
    Thanks,
    Abhinav.

    Hi Abhinav,
    There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
    Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
    If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
    <b>Reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Monitoring qRFC outbound queues

    Hi,
    I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
    I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
    Does anyone have experience with this?

    Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
    That should put you in the right direction.
    Regards
    Juan

  • Outbound Queue got deleted during ECC upgrade

    Hi,
    After ECC EHP6 Upgrade Outbound Queue in SMQ1 got deleted for data source 0F_GL_14 in ECC, but delta queue exists under RSA7.
    how to re-generate outbound Queue which got deleted during Upgrade?
    Santhosh

    Hi Shantosh,
    In this case, please follow the below steps -
    1. Delete the delta for your info package, and do init without data transfer.
    2. After this first fill your setup tables with SBIW tcode,
    3. And run your Info Package with Repair full request the data will come to PSA now, anyway ur DSO will overwrite all the existing records and add only the fresh records.
    4. Later enable your delta for the Info Package. This will absolutely go fine.
    Thanks..!!
    Regards,
    Harish. K

  • About qRFC Monitor (outbound queue)

    Hi Experts,
    we are upgrading the r/3 system from 4.6 to 4.7 and i am responsible for BW activities, i was asked to take care of the outbound queue what does that mean? and what needs to be done with this queue during r/3 upgrade? and there are some queues(in SMQ1) with destination None and entries 1 what are those???
    Does any one have the check list what needs to be done on the BW side during R/3 upgrade?
    Thanks in Advance.

    all the guides can be found on sapnet
    https://www010.sap-ag.de/instguides
    the particular guide for your particular upgrade is THE place to look for help.  it's very detailed w/ links to all the oss notes you need to review as well.

  • BDOC stops with status ready

    Hi
    I am replicating campaigns from CRM to PS. Now as I release the campaign BDOC is triggered and goes to backend ECC system. But after replication BDOC comes and stops in inbound queue of CRM with status ready. When I goto SMQ2 and unlock it, it flows through.
    This problem I am facing for all campaigns transfered not for any specific one.
    Please help me in resolving this issue.
    Thanx in advance.
    Cheers
    Hits

    Hi,
    This happens because the Queues are not registered.
    In SMQ2, note the first 3 cahracters of the queue, e.g, R3A or CSA.
    Now goto SMQR and see if any Queue exists with this name like R3A* or CSA*.
    If it does, then select the Queue and press button Registration.
    If it does not, tehn create a new entry by pressing the same registration button and entering the following value:
    Queue name     CSA*  
    EXEMODE     D     
    MAXTIME                     60    
    USERDEST           
    NRETRY                     30    
    TDELAY                     300   
    Doing this is sufficient for your Queue to get executed automatically.
    Kindly reward with points in case helpful.
    Sharif.

  • Outbound queue in NOSEND status

    Dear All
    We are doing integration between CRM2007 and lotus domino server (6.5)
    And we have done installation of groupware connector (2.1) and proxy (Default) and replicated all the customizing objects successfully and we are using ABAP_MAPBOX.
    So, when we try to synchronization of BPu2019s between CRMàGW, we are getting errors.
    WE Can see in trnx SMQ1 (outbound queue monitor) ISP_O* queues with NOSEND status.
    When, we verified that there is a lock in the Connector... Error code is 9 (Unspecific error
    most probable reasons) with user name (ADDRESS_BOOK, GWA_01) but USERLIST.xml contains replicated BPs address and even we checked the Trace log which specifying that, "Unspecified error: Corresponding proxy for gw server is not found: xyzserver-dhq/xyz".
    Regards
    Subbaraju

    Subbaraju,
    We too are running CRM2007 with LotusNotes/Domino 6.5.
    The ISP_O* items you see in NOESEND will remain in the outbound queue until the groupware adapater (GWA) picks them up, your problem is with the GWA itself. 
    To see if these are, in fact, your outgoing partner records - check the ownership of the ISP queue:  SE16 table = ISPQTAB
    I recommend installing the connector and the default proxy on the same server, but it sounds like your proxy has stopped functioning.  If you startup the Lotus Domino Connector, the monitor, you should see a red light on the proxy status.  Make sure you applied the latest Groupware Connector Patch from SWDC - SAPGRPWCN14_0-10002067.ZIP.
    I also recommend sticking to the precise versions of required software:
    SUN JDK or JRE 1.4.2 or higher
    Sun Java Mail (sap recommends 1.3.1)
    Java RunTime 1.4.2
    JavaBeans(TM) Activation Framework 1.0.2
    Hope this helps.
    - Brian.

Maybe you are looking for