Unread Messages From Exchange Trash Show Up In Smart Mailboxes

Hi
I have five accounts configured in Mail. I have two smart mailboxes set up to show selections of messages e.g. Home Inboxes is supposed to show messages in the inboxes of my private accounts. It is configured like this:
Strictly speaking the second condition shouldn't be necessary as the Include messages from Trash option is not checked. However, despite all this, deleted messages on an Exchange account I have still show up in the smart mailbox:
As you can see there are messages in there that are in Trash.
I've tried rebuilding all the mailboxes but that doesn't seem to help. I can create new smart mailboxes with the similar condition logic and they don't work either.

Actually I just noticed that it doesn't matter if they are unread or not.

Similar Messages

Appointments from Exchange 2010 show as Mail in Mailbox

I have a very frustrating issue with a single user on one of our post offices. For reasons unknown appointments sent to the user from Exchange 2010 appear as mail items instead of appointments within the mailbox. Other users on the same post office do not get the same issue. I have tried resetting the user's views and a full client reset via maintenance. I have set the user's client settings to be the same as another user who does not get the issue without any luck either. Maintenance checks on the account does not flag any errors. I'm pretty certain I'm missing something very simple, but alas I can not think what.
Software wise we're running client 8.0.1 on post office agent version 8.0.2. We seem to get the same results regardless of the Client version of outlook, (we have tried the web version and 2003 and 2010 of the client). Anything else I could try would be greatly appreciated.
Kind Regards
Rob

In article <[email protected]>, Rob naylor
wrote:
> Software wise we're running client 8.0.1 on post office agent version
> 8.0.2.
>
How about updating those as they are a bit old.
Try looking at that user's account from another machine and from
WebAccess (if installed).
It is good to separate the PC from the user account as sometimes an odd
problem can be from some funky issue on the PC.
I'm not surprised that different versions of the Exchange 2010 client
doesn't make a difference as there is the formatting is set when
Exchange formats the outgoing to the internet.
A thought there, is your user setup as a contact on the Exchange
system, there have been settings in the past that caused invalid
formatting of internet messages. Something to the effect that 'this
user is on OutLook/Exchange vs regular internet standards'.
Has there been a single appointment sent from a user on that Exchange
system to two of your users?
Andy Konecny
Konecny Consulting Inc. in Toronto
"Give more than others think is wise
Challenge yourself beyond what others think is right"
Michael 'Pinball' Clemens

Mail places 1 unread message in the trash every time I open the app

Mail places 1 unread message in the trash every time I open the app. Has anyone else had this problem.Recently I had to reindex my messages. Is there a preference file I can delete?

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

How do I get received messages from others to show up on my different Apple devices, such as my iPhone

How do I get received messages from others to show up on my different Apple devices, such as my iPhone or iPad or iPod Touch, etc. I can see their reply on the device I was using at that moment but not on the other devices even iMessaging is turned on. Is there a way to refresh to incoming messages when one picks up one of their other Apple devices?

Hi there lkbluntzer,
You may find the information in the article below helpful.
Send and receive messages
http://help.apple.com/iphone/7/#/iph01ac18d71
See what time a message was sent or received. Drag any bubble to the left.
-Griff W.

Apple Mail can't send or receive messages from Exchange 2010, Mountain Lion

Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
          0   CoreMessage                         0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
          1   CoreMessage                         0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
          2   Message                             0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
          3   Message                             0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
          4   Message                             0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
          5   CoreMessage                         0x00007fff86a65b80 -[MonitoredOperation main] + 219
          6   Foundation                          0x00007fff92475926 -[__NSOperationInternal start] + 684
          7   Foundation                          0x00007fff9247d0f1 __block_global_6 + 129
          8   libdispatch.dylib                   0x00007fff87f4af01 _dispatch_call_block_and_release + 15
          9   libdispatch.dylib                   0x00007fff87f470b6 _dispatch_client_callout + 8
          10 libdispatch.dylib                   0x00007fff87f481fa _dispatch_worker_thread2 + 304
          11 libsystem_c.dylib                   0x00007fff9068ad0b _pthread_wqthread + 404
          12 libsystem_c.dylib                   0x00007fff906751d1 start_wqthread + 13

Over the last several weeks, I have been unable to send or recieve e-mails from Exchange 2010 in a corprate environment. I have deleted and re-added the account several times, and sometimes it will fix the issue. Other times it won't. I have also tried deleting the account, clearing the cache in ~/Library/Mail/V2/EWS*, and then re-adding the account. It resolves the issue temporarily, but then returns to not being able to sync. I've tested it with a number of other users accounts on the same Exchange system, and it's working as expected. OSX is version 10.8.4 with current patches as of 10/7/2013.
The connection doctor shows that the connection to EWS is green. The activity monitor looks like it's updating the folders properly on sync.
Here is the message I get in the logs in high volume when Console logging is turned on:
*** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1508/Message/EWS/EWSConnection.m:555
Received an unexpected error: Error Domain=EWSExchangeWebServicesErrorDomain Code=277 "The operation couldn’t be completed. (EWSExchangeWebServicesErrorDomain error 277.)" UserInfo=0x7fd1c9a97e70 {EWSErrorMessage=The request failed schema validation., NSUnderlyingError=0x7fd1c85106f0 "The operation couldn’t be completed. (SOAPWebServicesErrorDomain error -1000.)"}, response: (null)
          0   CoreMessage                         0x00007fff86a4a517 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 141
          1   CoreMessage                         0x00007fff86a4a388 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 215
          2   Message                             0x00007fff8daa5a8e -[EWSConnection sendMessage:forRequest:] + 762
          3   Message                             0x00007fff8daaeab3 -[EWSGateway sendMessage:forRequest:] + 69
          4   Message                             0x00007fff8dac543a -[EWSRequestOperation executeOperation] + 110
          5   CoreMessage                         0x00007fff86a65b80 -[MonitoredOperation main] + 219
          6   Foundation                          0x00007fff92475926 -[__NSOperationInternal start] + 684
          7   Foundation                          0x00007fff9247d0f1 __block_global_6 + 129
          8   libdispatch.dylib                   0x00007fff87f4af01 _dispatch_call_block_and_release + 15
          9   libdispatch.dylib                   0x00007fff87f470b6 _dispatch_client_callout + 8
          10 libdispatch.dylib                   0x00007fff87f481fa _dispatch_worker_thread2 + 304
          11 libsystem_c.dylib                   0x00007fff9068ad0b _pthread_wqthread + 404
          12 libsystem_c.dylib                   0x00007fff906751d1 start_wqthread + 13

How can i recieve unread message from pop3 server

hi ! i'm using pop3 server
I used the following code to set read message.
String host="servername";
String username="xx.domainname";
String password="xxxxxx";
try
Session mySession=Session.getDefaultInstance(System.getProperties(),null);
               mySession.setDebug(true);
          //get a specific mail storage
      myStore=mySession.getStore("pop3");
// Store myStore=(Store)session.getAttribute("myStore");
myStore.connect(host,username,password);
myFolder= myStore.getFolder("INBOX");
if (myFolder == null)
                    System.err.println("No inbox folder is available");
               else
                    System.out.println("Accessing"+ myFolder.getFullName()+"folder========" );
               myFolder.open(Folder.READ_WRITE);
Message[] message=myFolder.getMessages();
message.setFlag(Flags.Flag.SEEN,true);
System.out.println("Flags ========: "+message[i].getFlags());
myFolder.close(true);
myStore.close();
catch(Exception e)
Again if i receive message from server it is not showing unread messages. it will return as 0.(I used the method *getUnreadMessageCount()*)
Can i have some help
Thanks in advance.

The POP3 protocol supports no flags.
See the FAQ and the javadocs for the com.sun.mail.pop3 package.

Dynamic Error Message from a Bundle Showed in a rich:fileUpload

Hello.
There is a way to show a dynamic error message from a bundle (i.e, There is a problem in the word {0} in line {1}.) in a rich:fileUpload after the Managed Bean method in fileUploadListener="#{MyManagedBean.myMethod}" attribute was performed? That's because the error message parameters are discovered only after the MyManagedBean.myMethod execution.
As far I know, I'm able only to show a static message with transferErrorLabel="#{myBundle.myErrorMessage}" attribute.
Here is my rich:fileUpload component code:
<rich:fileUpload id="upload"
     fileUploadListener="#{PlanilhaManagedBean.importar}"
     maxFilesQuantity="100"
     immediateUpload="true" listHeight="130" acceptedTypes="xls"
     addControlLabel="#{bundle.geralProcurarArquivo}"
     ontyperejected="alert('#{bundle.geralExtensaoInvalida}')"
     cancelEntryControlLabel="#{bundle.geralCancelar}"
     clearAllControlLabel="#{bundle.geralLimparTudo}"
     clearControlLabel="#{bundle.geralLimpar}"
     doneLabel="#{bundle.geralArquivoTransferidoComSucesso}"
     progressLabel="#{bundle.geralTransferindoArquivo}"
     stopControlLabel="#{bundle.geralParar}"
     stopEntryControlLabel="#{bundle.geralParar}"
     transferErrorLabel="#{bundle.geralErroNaTransferenciaDoArquivo}" /> Any idea?
Thanks in advance.

Hi, BalusC. Thanks for your reply.
I already tried that. I put a navigation-rule in faces-config.xml to the same page of the rich:fileUpload, but the rich:fileUpload component doesn't starts a get or a post request. So the navigation-rule is ignored and the page wasn't rendered again.
I also tried to put the <a4j:support ...> in the rich:fileUpload to re-render the <h:messages ...> component, but didn't work too. The <h:messages ...> wasn't re-render.
Thanks in advance.
Edited by: reolca on May 10, 2009 5:40 AM

Mail hangs when downloading messages from Exchange

I've had the problem of Mail hanging when downloading from Exchange 2007, though from time to time it all works fine, suggesting all the settings are correct. Sometimes it will all work after a few forced quit- restart cycles, but this isn't reliable. Following advice on this forum I've trimmed the number of messages on the server (to c. 3,500), to no effect, and have deleted the Envelope Index file (which did temporarily alleviate the problem, but issues returned 24 hours later).
I see several errors are reported to Console which suggest a communication problem with EWS, and in particular an "id" issue, ("id is malformed" and a illegal temporary id is being used online) though I have no idea what id this is, or whether I can influence it in any way. Here are three exemplars:
1)
04/01/2010 00:27:10 Mail[14116] * Assertion failure in -[EWSGateway resolvedIdStringForIdString:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSGateway.m:1548
Temporary ids should never be used while online. Got temp-e2dbcc09-254b-4f02-9a54-05e314cb0755.
0 Message 0x00007fff82691119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff8269107e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff825dcb68 -[EWSGateway resolvedIdStringForIdString:] + 186
3 Message 0x00007fff825da29d -[EWSDeleteItemsRequestOperation prepareRequest] + 380
4 Message 0x00007fff825f1f93 -[EWSRequestOperation executeOperation] + 60
5 Message 0x00007fff8269f347 -[MonitoredOperation main] + 229
6 Foundation 0x00007fff8800406d -[__NSOperationInternal start] + 681
7 Foundation 0x00007fff88003d23 ___startOperations_block_invoke2 + 99
8 libSystem.B.dylib 0x00007fff87cb0ce8 dispatch_call_block_andrelease + 15
9 libSystem.B.dylib 0x00007fff87c8f279 dispatch_workerthread2 + 231
10 libSystem.B.dylib 0x00007fff87c8ebb8 pthreadwqthread + 353
11 libSystem.B.dylib 0x00007fff87c8ea55 start_wqthread + 13
3)
04/01/2010 00:27:11 Mail[14116] * Assertion failure in -[EWSResponseOperation handleResponseMessage:withObject:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSResponseOperation.m: 420
Mail did something wrong: Id is malformed. on EWS response <EWSResponseOperation: 0x1168c57a0> (EXECUTING)
0 Message 0x00007fff82691119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff8269107e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff825f2eb2 -[EWSResponseOperation handleResponseMessage:withObject:] + 2295
3 Message 0x00007fff825f3592 -[EWSResponseOperation handleResponseMessages] + 240
4 Message 0x00007fff825f30a1 -[EWSResponseOperation executeOperation] + 69
5 Message 0x00007fff8269f347 -[MonitoredOperation main] + 229
6 Foundation 0x00007fff8800406d -[__NSOperationInternal start] + 681
7 Foundation 0x00007fff88003d23 ___startOperations_block_invoke2 + 99
8 libSystem.B.dylib 0x00007fff87cb0ce8 dispatch_call_block_andrelease + 15
9 libSystem.B.dylib 0x00007fff87c8f279 dispatch_workerthread2 + 231
10 libSystem.B.dylib 0x00007fff87c8ebb8 pthreadwqthread + 353
11 libSystem.B.dylib 0x00007fff87c8ea55 start_wqthread + 13
3)
04/01/2010 11:25:57 iCal[9798] deleting pending creates because the server failed to confirm their creation: (
"<NSManagedObject: 0x115cf0a50> (entity: ContactMapping; id: 0x1185962f0 <x-coredata://54D56B92-4C67-416D-8B08-A79AB7FDAF86/ContactMapping/p361> ; data: <fault>)",
"<NSManagedObject: 0x115c4e530> (entity: ContactMapping; id: 0x115ce7bc0 <x-coredata://54D56B92-4C67-416D-8B08-A79AB7FDAF86/ContactMapping/p362> ; data: <fault>)"
Any help very welcome!

I finally called AppleCare again (after the first rep never got back to me), and we determined that somehow my Mail Rules had become corrupted. One of them (probably thanks to OmniFocus fiddling with my Mail rules) was caught in a loop that would keep repeating until it caused Mail to crash. I had to remove the "MessageRules.plist.backup" and "MessageRules.plist" files from my ~/Library/Mail folder, and then recreate all my rules, but that did the trick.

How to retrive all unread messages from a topic?

Hello!
          I have a webapp that stores TextMessages in a Topic in WebLogic.
          I have an ejbapp (Message driven bean) that reads messages from the topic.
          If both are up and running the ejbapp reads all messages sent from the webapp to the topic.
          But if I stop the ejbapp for a while and sends a couple of messages to the topic and then deploy the ejbapp again, then the ejbapp does not read the unconsumed messages. If I send a new message to the topic the ejbapp reads that new messages but it does not get the previous messages that are on the topic.
          Is this the way it should work? Or could I get the message driven bean to consume all the messages that it has not consumed from the topic when it starts?
          My weblogic-ejb-jar.xml looks like:
          <pre><!DOCTYPE weblogic-ejb-jar PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN' 'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
          <weblogic-ejb-jar>
          <weblogic-enterprise-bean>
          <ejb-name>OrderManagerMDB</ejb-name>
          <message-driven-descriptor>
          <pool>
          <max-beans-in-free-pool>200</max-beans-in-free-pool>
          <initial-beans-in-free-pool>20</initial-beans-in-free-pool>
          </pool>
          <destination-jndi-name>jms/OrdersTopic</destination-jndi-name>
          <connection-factory-jndi-name>jms/OrdersConnectionFactory</connection-factory-jndi-name>
          </message-driven-descriptor>
          <enable-call-by-reference>True</enable-call-by-reference>
          </weblogic-enterprise-bean>
          </weblogic-ejb-jar></pre>
          And my ejb-jar.xml looks like:
          <pre><!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
          <ejb-jar>
          <enterprise-beans>
          <message-driven>
          <ejb-name>OrderManagerMDB</ejb-name>
          <ejb-class>brownbagwarehouse.OrderManagerMDB</ejb-class>
          <transaction-type>Container</transaction-type>
          <acknowledge-mode>Auto-acknowledge</acknowledge-mode>
          <message-driven-destination>
          <destination-type>javax.jms.Topic</destination-type>
          </message-driven-destination>
          </message-driven>
          </enterprise-beans>
          </ejb-jar></pre>
          My MDB onMessage looks like:
          <pre>public void onMessage(Message message)
               try
                    TextMessage textMessage = (TextMessage)message;
                    System.out.println(textMessage.getText());
               catch(Exception e)
                    e.printStackTrace();
          </pre>
          Best regards
          Fredrik

For subscriptions to continue to exist even while no subscriber is attached they need to be "durable". See the EJB programmer's guide, and search for "durable" in the MDB doc.
          In JMS terminology these are termed "durable subscriptions".
          Tom

HELP. How to read unread message from Gmail?

Folder inbox = store.getFolder("INBOX");
          inbox.open(Folder.READ_ONLY);
          FetchProfile profile = new FetchProfile();
     profile.add(FetchProfile.Item.ENVELOPE);
System.out.println(inbox.getUnreadMessageCount());
It print out the number of all messages. I just want to get it number of unread message.
I have bean searching for a long time. Is there any one can help me. I just want to make a Gmail notifier. Ring me when I get unread email.

Are you using IMAP or POP?
Did you read the JavaMail FAQ entries about Gmail?

Have deleted messages from iPad, why showing up on iMac?

OK. This is a tricky one. Mostly doing iMessage on my iPad during the week, and I delete them after the days converstations. When I go onto my iMac on Saturdays at home, iMessage pops up and starts to load all the iMessages from the week. When I delete them from my iPad, doesn't Apple delete them from their servers? This is scary. I have iMessage prefernces set to always be online so I dont have to open the app while on iMac.
Also another side question, when on iMac, new message comes in and it does not get linked to my contacts? Like it says new message from +1 (555)555-5555 and not the Person who is associtated with that number.

That is the way messages works in its current status. You have to delete the messages from each individual device. Apple may add a feature to delete from all devices, but at this time it is not possible.
Also another side question, when on iMac, new message comes in and it does not get linked to my contacts? Like it says new message from +1 (555)555-5555 and not the Person who is associtated with that number.
You have to make sure you have that exact number linked to your contacts on the imac. Do you use iCloud contacts?

How to show threads in Smart Mailboxes?

Is there any way to have "threads" shown in Smart Mailboxes wherein some of the emails in the thread might not fit the filter criteria? For example, for a Smart Mailbox with a filter that is a date range, some of the emails are part of threads with emails that are outside of the date range. It is far less productive if you cannot see that there are other emails in a thread. Any ideas on how to overcome would be appreciated!

Yes. There is a "show related messages" toolbar button which will show you the rest of the thread. Click it. If it's not in your toolbar, put it there.

Apple's Mail program is missing 1000s of messages from Exchange account

I just discovered a terrifying thing about Mail, which I had chosen to use as my mail client to access my company's Exchange server.
When connected to the Exchange server, Mail shows and counts only 6,800 messages , while when I access the Exchange account from other systems ( iPad, iPhone, web mail, MS Outlook, ) there are 18,000 messages !
This is a SHAME ; I have used Mail to search for messages and make archives ; now I understand why on many occasions my searches etc. where unsucessful !
Mr Apple and Mr Microsoft, you need to solve this or just say upfront one should NOT use Mail to access an Exchange account ( which is my advice to anybody).

Right click on the email in the left hand pane. Select Mark as Unread to return it to an unread state. Click Delete to move it to the trash or file it in a folder if you have any configured. You may need to click the show button on the upper left hand side of the window to see your folders. The + sign at the bottom of that pane allows you to add a new folder.

Mail.app not retrieving new messages from Exchange Server

I used to use mail.app for my work email account, set up as Exchange IMAP. After upgrading to SL, I wanted to take advantage of the new exchange features, and set up an exchange account.
But now, multiple times a day, the new exchange account will just sit there, trying to fetch new mail (the spinning wheel thing in the left side menu bar). I've gone hours w/o noticing the problem, only realizing this when I check my iPhone and see dozens of new messages. Restarting fixes the problem.
Anyone else having this issue?

michellzappa,
All of my e-mail providers have some sort of web based access for my accounts. They identify, segregate and prevent any message marked as bounce from being downloaded to my inbox. Is this what you are describing as redundant?
Mail Scripts 2.7.10 by Andreas Amann, provides an excellent compilation of mail scripts.
I would advise that you create a new post with the title. "Can I write an applescript to automatically clean out messages on server every hour?" in the AppleScript Forum.
;~)

Is there a way to make my text messages from my mack show up as my phone number instead of apple ID?

Like when I'm in my messages app on my laptop and I'm texting someone, I want it to be the same conversation as from my phone.

As the others noted, if you don't have any older iTunes backups then the deleted messages would not be recoverable. The free trial of Decipher TextMessage will show you if there are any text messages in your older backups that can be recovered.

Unread Messages From Exchange Trash Show Up In Smart Mailboxes

Similar Messages

Maybe you are looking for