Unreadable File when trying to import Pictures from CompactFlash in Reader

In the past I have been able to read images from my compactflash.
This just started happening.
I have a Canon EOS Rebel and it stores images on a CompactFlash. When I put it in my Dazzle* Hi-Speed USB 2.0 reader to download the images into iPhoto, I'm getting "unreadable file" errors. Then I take the same reader and flash card to my Windows laptop, I'm able to read the images. Then I figure.. what if I manually copy the pictures to a folder on the Mac... Well, they copy over, and if I single click the file when my finder is on Column mode, the thumbnail of the image comes up in the Preview pane, but when I double click it for Preview Application to open, the image comes up digitally corrupted. Even if I take my USB cable that came with the camera, I put the flash back into the camera and then I try to download the images and still get the same error.
I HAVE TO FIGURE OUT A WAY TO GET MY PICS TO IPHOTO!!
So, I scaled down the capture from LARGE to SMALL, and tried to read the files from the reader again. I GET THE SAME ERROR! Then I try the USB Cable direct to the camera, and lo and behold, iPhoto is able to pull in the pictures.
My question is... Has anybody out there experienced CompactFlash card reader problems? You think this is a Tiger problem?
PS.. I've tried reformatting the flash using the OS from the Camera, and with Windows OS with no success.
Thanks in advance!

Thanks for the reply...
When I was experimenting, I copied the files from the reader unto the mac, discovered I couldn't read it, then from the Windows computer, I networked over to the Mac to attempt to view the images. It was corrupted, that's when I went on a wrong tangent.. and started blaming the camera. I foolishly formatted the card, erasing the good images. So, now I'm left with bad images on the Mac because, I missed the opportunity to copy the images unto the windows laptop with the reader. There weren't that many pictures, but darn... we could've used one of them for our XMAS card.
This experiment still begs the question, "How come the reader can work on the windows computer and not the Mac?" but, life is short... readers are cheap, I'll just buy one just like the one I borrowed... that works, on the Mac, and keep the other reader on the Windows computer with a sign that says "Doesn't work on Mac!".
But just curious, what is a "kext file"? Is that a driver?

Similar Messages

  • I get an error message when trying to import pictures from iphone to iphoto(Imac)

    I get an error message trying to import photos from phone to imac. have 266 photos to get on my computer. how can i get these pictures off iphone onto my imac.?

    Try a couple folders up - a parent folder's permissions can cause problems with a child subfolder.
    And don't just rely on the read-only box. Go to c/users/username/music, right-click and get permissions, go to the security tab and make sure your username has full control and ownership.

  • HT201302 When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

    When I am trying to import pictures from my iphone to PC, I get the message'No new pictures of videos were found on this device'. There are lots of pictures which i can see on the iphone. I have a 4S. Is there a way to get around that?

    It sounds like you are using an application to import. You can do it manually.
    Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

  • When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the pastiPhoto cannot import your photos because there was a problem downloading an image.

    When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the past, "iPhoto cannot import your photos because there was a problem downloading an image."

    Can you access the images with Image Capture (in your Applications Folder) ?

  • How do I get rid of "unreadable files" when I am importing from my camera?

    How do I get rid of "unreadable files" when I am importing from my camera?

    Are all images unreadable? What is the exact error message you are getting?
    If only a few images are unreadable, try to import not all photos at once, but in smaller batches, until you know, which photo it is that cannot be read. Import all photos that can be read and reformat your card in the camera to remove the unreadable files.
    But if all photos are unreadable, try, if Image Capture can read your card.
    Is it a new camera? Have you been able to import from that camera before?

  • Please help! error message when trying to download pictures from iphone5 to macbook pro

    Hello everyone,
    lately I have been having some issues when trying to download pictures from my iphone to my iphoto library. Whenever I try to do so this message pops up "The following file could not be imported. The file is in an unrecognized format." Would anyone happen to know why this is happening? I was always able to transfer my pictures from my phone to my laptop before, so I don't know why this is happening now.
    Thank you very much to whomever might be able to solve this problem for me!!

    "The following file could not be imported. The file is in an unrecognized format."
    if you look at the error message - is the filename mentioned? What kind of file is it? A JPEG? A video?
    Can you import the files from your iPhone with Image Capture?

  • IPhoto freezing when trying to import photos from iPhone

    iPhoto has started freezing when trying to import photos from an iPhone. The device is recognised but just get "loading . . . " message with no photos appearing. Has anyone else seen this?

    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Run time error when trying to import bookmarks from firefox

    When trying to import bookmarks from Firefox to Safari I get the following error message: "Run Time Error. This application has requested the Runtime  to terminate it in an unusual way." Safari does not function anymore and I have to close it. Can somebody help me? I am using a PC with Windows 7.

    In the Bookmarks Manager (Library) there is a toolbar with the Back and Forward button and three other buttons (Organize, Views, Import & Backup).
    * The first (gear) button is the Organize button with basic edit menu items for bookmarks
    * The second button is the Views button that allows to change the sort order for viewing purposes (doesn't sort permanently).
    * The third (star) button is the Import & Backup button that allows to backup and restore a JSON backup and import and export an HTML backup and import bookmarks from other browsers.
    Hover each button to see the tooltip or click each of them to see what they do.
    * https://support.mozilla.org/kb/how-do-i-use-bookmarks

  • When trying to import images from an external hard drive into Lightroom 5 it states no preview for the files selected

    Go easy on me here….
    Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
    All other images on the external hard drive can be previewed and imported without issue.
    I have tried adding the images onto the computers hard drive as well but still no joy.
    I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
    Any help greatly appreciated.

    Go easy on me here….
    Trying to import images from external hard drive into Lightroom 5 but the selected images state 'no preview for file'.
    All other images on the external hard drive can be previewed and imported without issue.
    I have tried adding the images onto the computers hard drive as well but still no joy.
    I've used Lightroom 5 previously and had no issue so convinced its the files I'm trying to import (jpeg files).
    Any help greatly appreciated.

  • Unreadable photos when trying to import old photos to new updated iPhoto??

    After updating to Yosemite and updating iPhoto to 9.6, when trying to import all my old photos, it says they are all unreadable.  How do I update the file format of the photos to import them?

    You found the right way to do it.  Never import an iPhoto Library into iPhoto. Just open the iPhoto Library by double-clicking it. You are lucky, that iPhoto prevented you from importing the iPhoto Library. It would have created a terrible mess of duplicate photos in all sizes.

  • Lightroom 5.7.1 stops responding when trying to import photos from iPhone.

    As the title says, when trying to import the photos from my phone which I've done with Lightroom for a couple years now, the program stops responding entirely. This happens with both mine and my wife's phones. We did leave hers plugged in over night and it eventually started responding again and I was able to import her photos. But I can account for at least 5 hours during which it was not responding first. I'm not sure what changed over night that finally let it work again.
    Any ideas? Thanks!

    You're sure you want to stop using iphoto? Then I would try it this way instead:
    Export each event in your iphoto library separately, put the photos where you want to keep them and use "from files and folders". If there's an event that the organizer chokes on, then you'll have to go into that one photo by photo to see where the problem lies. (You are aware that using "from iphoto" is duplicating your entire iphoto library, so you don't want to do that AND keep using iphoto, right?)

  • Problems when trying to import metadata from SQL server using OWB

    Hi,
    We are using Oracle 11.2 EE on AIX and OWB: 11.2. We are in the process testing Oracle Transparent gateway for SQL Server and have installed and configured it on a standalone windows server. We and have run the ORACLE_HOME\dg4msql\admin\dg4msql_cvw.sql on SQL Server side, in order to query the SQL-Server data dictionary. We have created a DB-link and can pull data correctly without any problems. When trying to import metadata in OWB Client on win xp, we have created a non-oracle SQL Server Module and are able to connect and start the import, but the displayed table names look strange and can not be imported. In front of every letter there is a square box, so instead of ADDRESS (the address table in the source system) , it reads "squarebox"A"squarebox"D"squarebox"D"squarebox"R"squarebox"E"squarebox"S"squarebox"S and subsequently the import fails with :API0413: Illegal name [<tablename>] Name with preceding and trailing spaces is not allowed.
    The gateway have been configured with the following parameters:
    HS_FDS_CONNECT_INFO=<connect string>
    HS_FDS_TRACE_LEVEL=OFF
    HS_FDS_RECOVERY_ACCOUNT=RECOVER
    HS_FDS_RECOVERY_PWD=RECOVER
    HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
    Any ideas ?
    This topic has been posted in the Heterogenious Forum as well, but as the problem is within OWB, I also post it here.
    Thanks in advance!
    Henrik
    Edited by: he**** on Nov 15, 2011 1:29 PM

    Henrik,
    I've found other problems where OWB adds a space between all characters returned from SQL*Server which is what is happening in your case, although it is being displayed as a square box.
    In one of these cases the problem was fixed by using the 11.2.0.2 OWB so would it be possible for you to try with that version ?
    Also, as the problem is not with the gateway itself as you can select successfully using a database link then it would be better to follow up in the OWB forum -
    Forum: Warehouse Builder
    Warehouse Builder
    as they will be able to help with the OWB side of the problem.
    Regards,
    Mike

  • When trying to import photos from a memory card I get error "The following files were not imported because they could not be read.".  When i first installed Lightroom i was able to import from the very same card because there are photos in my library.  I

    Someone please help...I am very annoyed with Lightroom as I have been trying to import photos with no success

    This message means that you don't have permission to write to the destination folder or disk drive. This is an operating system issue that can be resolved by changing permissions. And you can get plenty of information on how to do that by doing a web search for "change disk permissions".

  • When trying to import photos from iPhoto organizer 12 crashes

    I installed new photoshop elements 12 and when It attempted to import photos from iphoto 9.5.1 it get to the 7th picture and then locks up, I have to force quit app. What can the problem be? I tried importing a few photos and it worked ok, I attempted to import using files and folders and it locked up again.

    You're sure you want to stop using iphoto? Then I would try it this way instead:
    Export each event in your iphoto library separately, put the photos where you want to keep them and use "from files and folders". If there's an event that the organizer chokes on, then you'll have to go into that one photo by photo to see where the problem lies. (You are aware that using "from iphoto" is duplicating your entire iphoto library, so you don't want to do that AND keep using iphoto, right?)

  • LR 5.2 hangs when importing pictures from the SD reader (Macbook)

    Hi, I'm experiencing problems when importing pictures in Lightroom. The context is
    - Lightroom 5.2
    - Nikon D600 (always RAW files)
    - SDHC SanDisk Extreme Pro 32GB (UHS-I, 95MB/s)
    - Macbook pro 15" early 2011 (high def matte screen) running Mac OS 10.7
    I have a recurrent problem when importing pictures in Lightroom using the built-in SD reader. LR starts the process ok but a few seconds later it seems to stop. If I click on a picture I get "preview not available". Even when (after a long long time) the importing finishes, the pictures are corrupted and I have to start it again.
    The only solution I've found so far: try once and again (ejecting the card doesn't work, so I get several messages: 'disk not unmounted cleanly' or something similar) until it works smoothly. Usually 3 or 4 re-tries are needed. It goes worse with the number of pictures: the more pictures I have in my SD card, the more likely it will hang repeatedly. Very disappointing...
    Any help would be welcome. Thanks!
    Cheers, German

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. Be sure to not delete the photos after importing into the library.
    If you are able to import into the new library try repairing your current library as follows:  make a temporary, backup copy (select the library and type Command+D) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

Maybe you are looking for

  • Scheduling WEBI reports with API

    Is it possible to schedule a WEBI report with an external API? Explanation: our customers can view their data on our internet site. We want to show a list of reports where they can subscribe. For example: report X with parameter Y each monday morning

  • IPad recognizes my hp wireless printer but doesn't print.  Why?

    iPad recognizes my HP wireless printer but still nothing happens when I press print.  Why?

  • Can't find ANY files in iTunes!

    I hadn't used iTunes in a while, until my roommate tried to listen to my library. EVERY song (downloaded from a CD or bought at itunes store) has the exclamation mark next to it! I can't play, burn, etc. (I even updated iTunes, thinking it could be t

  • Apply Design-Time to entired site

    I'm using PHP templates and dreamweaver wont show my preview correctly. Right now I have to select each page (one by one) and pick design time. I have my sites defined in DW so you would think I could just set a designtime stylesheet to the whole sit

  • I need a os x full version mac g5 leopard 10.5.8

    I need a os x full version, mac g5 leopard 10.5.8 I've been looking around for sometime, but been unable to find anything.