"Unreadable Files" error r/c when importing JPG

My computer was recently serviced and now iPhoto "doesn't recognize" my HD photo card filled with JPG files (photos). My camera settings haven't changed, and I've never had this problem before.
HOWEVER, my daughter's same laptop imports them without error. I suppose I need to change some setting beyond my capabilities.
Can anyone please offer some help?
Thanks, in advance!

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Other than that, have you considered returning to where it was "serviced" and getting them to "service it better"?
Regards
TD

Similar Messages

Unreadable Files Error when Importing

Hi - I get an "unreadable files" error when trying to import from my iPhoto Library folder. I've read the other postings, and it sounds as though I should not have moved files directly into this folder. If that's the case, can someone please tell me how to move iPhoto Library files from an external HD onto my computers HD so that I can access the files in iPhoto? What I did was move pictures from my external HD "Pictures,iPhoto Libray, Originals" into the the same folder on my computer's HD - Thanks for any help you can provide!

misstexas:
Welcome to the Apple Discussions.
import from my iPhoto Library folder
That's the reason. iPhoto will not import any file that resides anywhere inside the iPhoto Library folder. Move them to the Desktop and import from there.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Unreadable file error when downloading from Iphone

I recently updated my Macbook Pro to Mountain Lion OS and iPhoto 11. Now when I try to import any video or pics I get the "unreadable file" error. I think it may have to with my system preferences or something because when I try to back up my phone on iTunes it says not enough disk space when my hard drive says there is 200gb free. Anybody have any idea where I should start? Go easy on my this is my first post.

Actually if the files download on her husbands computer then the problem is unlikely to do with either the files or Blackboard
Blackboard inc would be the wrong contact as they are simply the company that sell the software - the people to contact would be the support people at the institution hosting the blackboard installation who look after all the configuration of the servers - however if they download fine for some users for some then it is unlikely to be a blackboard issue.
The most likely cuprit is the internet connection which is probably timing out before the download finishes - the other possiblity is that something running on your computer i momentarily breaking the connection with a loss of data.
Normally if you have the adobe browser plugin for IE the file will actually open in the reader in the browser but this doesnt always work in other browsers.

Is there some secret to getting Pentax K-3 .dng files to display thumbnails when importing to an iPad (mini w/retina)? Files import fine, but no thumbnail. Mac OS has compatability with those files.

Is there some secret to getting Pentax K-3 .dng files to display thumbnails when importing to an iPad (mini w/retina)? Files import fine, but no thumbnail. Mac OS had compatibility with those files added long ago. Am I missing something?

I agree Terrance. However, I was able to copy other large batches of other files (my music for example) without any issues. The issue only showed up when copying iPhoto's library and/or the photos themselves. This was repeated 3 times; I copied all my other files to the drive then it unmounted on iPhoto. And, as I said, again when I started with a fresh reformat and just iPhoto. That does not seem like hardware to me if it is only happening with one set of files.
I have managed to get the iPhoto library to work on my other external drive. It wanted a rebuild twice and a thumbnail rebuild once. I am now attempting to copy it over to the new HGST internal drive.
Anyone have a suggestion for alternatives to iPhoto? I have aperture, maybe I will try that. But from what I understand, it just shares the same library as iPhoto.

I am getting an error ORA-39143 when importing a dump file

I get ORA-39143: dump file "c:\oraload\expdat.dmp" may be an original export dump file
when importing a dump file created by 9.2 exp into 10.2 database using impdp
I need to use the impdp utility with the table_exists_action option which doesn't appear to exist in imp
What is the proper mix of versions/flags/options to export from a 9.2 database and import into an existing 10.2 database while replacing existing data?
thanks

well its on the link i provided
"When tables are manually created before data is imported, the CREATE TABLE statement in the export dump file will fail because the table already exists. To avoid this failure and continue loading data into the table, set the import parameter IGNORE=y. Otherwise, no data will be loaded into the table because of the table creation error."
original import tries to append (insert)
there is no parameter here like table_exists_action=truncate/replace
1. drop all the tables (dynamic sql), so there will be no errors because of already existent tables
or
2. truncate all the tables (dynamic sql) + use IGNORE=Y
(or
3. drop the whole schema in target database, recreate it, then do the import)

Iphoto unreadable file error

I have iphoto on my mac and I recently imported some new photos. When I try and access the photos through iphoto my iphoto reads "FINISHING IMPORT" then an error pops up saying "UNREADABLE FILES: THE FOLLOWING FILE COULD NOT BE IMPORTED (THE FILE IS IN THE IPHOTO LIBRARY FOLDER).
I understand that iphoto cannot import files from the iphoto folder but why can I access the files in iphoto once they are imported. I'm double clicking the photos that usually full screens the image and now im getting that import error. Please help! Thanks

not sure to understand your concern.
This error message usually occurs when trying to import non image files (or image files not recognised by iPhoto or corrupetd files). The error message in that case is accompanied with a list of files which could not be imported.
I am getting confused when you say that you want to import files that are located in iPhoto folder. If they are already there, you don't need to import them...
Never put manually pics in the iPhoto folder directly.
If not answered, please clarify your question.

"file is not compatible when import assets in dvd studio pro, my file are .mov and .mp4, what is the problem?

i have a MacBook Pro v. 10.7.5, also have dvd studio pro 4.2.2
I have a file exported from final cut v. 7, using quick time movie option, it created a file with .mov. When I import to dvd studio pro, I have an error
message " file is not compatible". shall I export again using different parm? settings? thanks for the help in advance.

Thanks, Russ. I had my problem resolved by re-creating file from Final Cut using the "Video Format" as "MPEG-4 improved" instead of "H.264" before.
My orginial source is a dvd came from Taiwan, I used software 'Handbrake' to convert it to MPEG-4. Input to Final Cut to edit it. Exported out with H.264 as Video Format, wishing to improve the image quality but run into 'file impaitable' when import to DVD SP.
Now. I exported out Final Cut using the following parms, pictures quality is not bad.
1. File format = MP4
2. Image size= 1280x720 HD
3. frame rate = 30
4. video format = MPEG-4 Improved
hope this help people who might run into same problem. I never use the Compressor, will try it next time. thanks Russ.

Lost my Pictures with an update to 10.6.8 Says "unreadable file..could not be imported"

I have a MacBook. When I updated to 10.6.8 I went to look for my photos, I got the following message " Unreadable files : 1" underneath that heading it says " The following file could not be imported." (The file is in the iPhoto library folder.) In a white box it has the following line: /Users/sophianecak/Pictures/iPhoto/Library/Thumbs64Segment.data
I go to the library and get the same messgae.
HELP!

I had similar problems and I always avoid auto-updates.
If the original Snow Leopard works boot from the DVD and erase zeroing the whole Machine after a User Folder BackUP with Carbon Copy Cloner
If the DVD doesn't work or the DVD reader in the machine is dead.
Find a SL install copy a drive or a pendrive
1 Install snow Leopard from any Snow Leopard DVD in a hard drive or a pan without systems including Rosetta and Qtime 7
2 Download the 10.6.8 Combo package from Apple
3 Upgrade the new installed system in your drive or pen
4 Use Carbon Copy Cloner to back up "ONLY" the user folder with the various foders
5 Boot the computer from your Drive or Pen erase zeroing the whole machine it will take time but just erasing is never enough as a lot of dangerous stuff hides there,
6 With Carbon Copy duplicate the newly installed system in your GranPa computer or using the original disk and the COMBO upgrade
7 Back up the various files, pictures with CCC in the machine
This takes time but it works usually.

Is the prores file that FCPx creates when importing c300 .mxf files stable/quality enough to then copy to other drives for further use? Are there any quality disadvantages to doing that?

Im wondering if I can directly copy the prores files fcpx creates when importing c300 .mxf files from the "original media" folder, reimport them for another project to and use them that way. Is there any problem with working that way? I'm doing this bc I want to have an organize finder structure for a client but cant break the c300 card structure to split clips on a card into different "scenes" to make it easier for them to understand what they're looking at. This is all to stay NLE nuetral--we like fcpx but they might want to edit somewhere else and more details in the finder level seems like the best solution? Suggestions on any of that? Thanks.

Thanks for your response. Are you sure that FCPx is working with .mxf/c300 natively? I thought it was just a background sort of repackaging or transcode into prores that it does without you having a choice? And bc of that, for me, it's sort of a "back end" feeling file: I'm curious if it's bad to get into the package contents folder to copy it over? Not about copying prores in general-- specifically, is the prores created of c300 footage in fcpx more of a fcpx, high quality alias file? Maybe I'm just feeling a little uncomfortable grabbing things from the inside/finder level of fcpx.

Can AVCHD files be not copied when imported?

When I import AVCHD files they are copied even though in the preferences I have selected "Leave files in place" and I leave that option checked in the import dialog. Is there any way to prevent AVCHD files from being copied?
Other types of files are not copied when I import them.

My exact specifications and work process:
I use two separate video cameras. One is a Panasonic HDC-TM900K; the other is a Panasonic HDC-TM700K. I record in AVCHD onto SanDisk 32 GB SD cards.
When filming is complete, I copy the entire contents of each separate SD card into its own folder, labelled according to camera and capture date.
In the past, this has allowed me to import into FCP 10.0.x and work directly with the AVCHD files without having to transcode or copy them. I have used this exact process dozens of times since the release of FCP 10.0.x.
Just this most recent time, after upgrading to FCP 10.1, while importing the same AVCHD files from the same SD cards and the same video cameras, the option to "leave files in place" was disabled.
I do understand that FCP 10.1 uses "Libraries" to organize media, and that this is a major change in how it organizes media files. I figured that this change was responsible for the difference in behavior.
I was hoping there was a way to continue to work with AVCHD card folders without having to copy or transcode.

Sld error in IR when importing SWCV

Hi
I'm unable to import any Software Component Version from the SLD into the Integration Repository. I ran transaction SLDCHECK, and successfully launched the SLD without any errors.
However, when I try to importing any software components from the SLD, the following error message is returned: Unable to read software component versions from System Landscape Directory "host addrres:50000"
in detail button
unable to import any Software Component Version from the SLD "host:50000"(swc_import_process_exception)
like this same 4 msgs comming
under this
unable to open connection to host"
host:500000".
the ip address of host could not be resolved. maybe
the URL is misspelled or the host dies no longer exist.
thess details comming in deatils button
Can anyone help please? it arzzent pls can any one help me
Many thanks in advance.

Hi,
Chek ur role and also check ur id is locked.
to know the authorization role check this link.
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Regards,
Phani
Reward points if Helpful

Error is STMS when import client from 2 different system

I have two system in same landscape, system 1 is production with system ID : SEP, system 2 is develop with system ID : SED (is Domain Controller),
system 1 & 2 in same domain with Domain Controller : DOMAIN_SED in STMS
And then, I exported client 800 on production system (system 1) with profile SAP_EXPA
and I have 3 request : KO00189.SEP ; KT00189.SEP ; KX00189.SEP (cofiles) and RO00189.SEP ; RT00189.SEP ; RX00189.SEP (data)
I copied 3 request above into system 3 (system 3 is different landscape with 2 system above and i setup system 3 at different location, so called backup system. System 3 is setup with system ID: SED and Domain Controller DOMAIN_SED too)
Then i imported client 800 into system 3
and i have an error in system 3 : System unknown in Transport Management System
Please help me ...
Thanks all

hi Shanker !
after reset user TMSADM -> connection not change -> connection work OK
i tried it but error remaining
Information extra :
system 3 is a physical system with Domain Controller : DOMAIN_SED ****** SID : SED and extra setup a virtual system as SEP on system 3
I configured tranport route from SED to SEP, so error "System unknown in Transport Management System" no longer
but arise new error "Error occurred in SED TMS communication"
Information extra error "Error occurred in SED TMS communication" when import request :
Error occurred in SED TMS communication
Message no. XT149
Diagnosis
An error occurred in the TMS communication layer of the following SAP system:
   System: SED.DOMAIN_SED(000)
   Function: TMS_CC_READ_CCCFLOW_OF_TRKORR
   Error: SERVICE_NOT_AVAILABLE ()
System Response
The function terminates.
Procedure
Check your transport control station configuration with transaction STMS.
thanks all
I hope error to solve soon .....

HELP - 88.2 k 24-bit wav file is slowing down when imported to garageband

i have an 88.2 k 24-bit wav file that is slowing down when imported to garageband. How do i get around this problem?

You need to convert it to 44.1 16 bit. You can do that with iTunes.

Unreadable Files error message

I am trying to import photos from a Sony DSC-N1 camera that i have done numerous times since getting my macbook. I am getting an error that says the files are unreadable and can not be imported and they are all in the jpg format. I have never had this issue before. please help! thank you

1 photo uploaded via the preview option you suggested but it looks like the other picture files were corrupted from not removing the camera correctly from the computer (maybe?). However, i can see them on the camera and the iphoto screen, but not on the preview screen (only a sliver of each is showing). Any suggestion on how to get them back so they can be uploaded? this might not be a question for this forum, but thought i would ask. thanks for your help

Unreadable file error

I'm trying to add to my iphotos library .jpg files from my pictures directory in finder. however i keep getting the follow error msg:
The following files could not be imported (they may be unrecognized file type or the files may not contain valid data)
I've also tried using copy and paste and get the same msg. NB the photos I am trying to bring across were originally imported into my mac from a memory stick rather directly from a camera.
I can however view JPG files imported directly from a camera.

I connected my iphone one day and the thing said "no access privileges" or something along those lines. I realized at that point I could not open iphoto. The same thing, no access privileges. I tried a bunch of things to get it to relauch, rebuilding iphoto etc. Sometimes it would load but when I closed iphoto on the next launch I'd get the same problem. I eventually tried to just create a new iphoto library. I was successful and thought I'd just grab the files from the iphoto package contents. Well...none of the 8891 photos I have in my library will import. I get this error:
*The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data)*
I spent about 6 hours over 2 days trying to get to the bottom of this. I eventually called apple tech support and $49 bucks and over an hour later the guy says "at this point we've determined that iphoto is working properly and that it has to do with the content and therefore it is not there problem anymore"! Thanks for the 49 bucks! In their opinion I must have done something to the files so they wont import. Which by the way is total b.s. These files load into any other program fine. Somehow, iphoto f'ed up and these photo's must have some sort of protection embedded in them exclusive to iphoto. What the ****? I'm not an iphoto expert and I've been hung out to dry.
Anyone else out there ever have this problem. All new photos or I should say any photos not previously loaded into iphoto will load no problem.
F

"Unreadable Files" error r/c when importing JPG

Similar Messages

Maybe you are looking for