Unreadable files (may not have valid data)
I posted this message on the MacOSX forums website. Any help here will be greatly appreciated.
Hi
I am trying to import some photos from my 7.2 mp Sony Cybershot camera onto iPHOTO. When i click import, it prompts me to "skip over" those i have already imported and, when i do, it pauses and an error message comes up.
Quote
The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
/private/var/tmp/folders.501/TemporaryItems/iPhoto/DSC00361.JPG
/private/var/tmp/folders.501/TemporaryItems/iPhoto/DSC00362.JPG
/private/var/tmp/folders.501/TemporaryItems/iPhoto/DSC00363.JPG
/private/var/tmp/folders.501/TemporaryItems/iPhoto/DSC00364.JPG
/private/var/tmp/folders.501/TemporaryItems/iPhoto/DSC00365.JPG
endQuote
This question is posed to those who have either a) used and is familiar with the Cybershot system and its troubleshooting and b) received the same error message and have troubleshooted or fixed the problem.
Thanks much for any future help. I hope someone can come to my rescue!
Sedukai
please note that this has only recently began to occur. I have about 100 pictures in my library that I have successfully imported into my library. I read the help section on this problem located in iPHOTO help and it told me that "the files may not be picture files." In my experience, .jpg is a picture file so i sort of rules that out (and also the fact that the help was directed to those with iPHOTO 2.0).
Thank you so much for any help!
Sedukai
p.s. also note that when i try to eject the camera (put the desktop pic into the trash) it says that it is in use and i should "quit the program".
Sedukai:
To rule out the files themselves use Image Capture, located in your Applications folder, to upload those files to the Desktop first. Then try to import from there.
If they don't import from there are there any setting on the camera that might have been changed, i.e. file type or the like. Also make sure there's an extension on the file and it's not been left off for some reason.
Do you Twango?
Similar Messages
-
Unable to download photos from my camera. iPhoto returns an error message that states: The following files could not be imported (they may be an unrecognized file or the files may not contain valid data). FILE NAME: 100_0490.JPG REASON: com.apple.ImageCaptureCoreError- 9905. WHAT'S UP WITH THAT? Did not have a problem importing photos under the LEOPARD OS, however, now that I have upgraded to Yosemite 10.10.3 the iPHOTO app is not performing the imports.
Are you using Photos, or iPhoto? Maybe you've got a corrupt file on your camera. I would try using the image capture application to import the bad picture to my desktop. If it works and the picture looks ok, then delete that pic from the camera, then try to import into iphoto again. You can then import the pic it was saying was bad from your desktop.
Or, try downloading all the pics using image capture and then import from the download folder. -
Photo will not upload new photos from same camera that always worked in IPhoto. Says "could not be uploaded )may be unrecognized file type or files may not contain valid data). Help!
Try image capture or a card reader - after the photos are safely on your Mac then use the camera's format command to reformat the memory card
LN -
Upload and Download Errror " File does not contain valid data"
We are on the ECC 6.0 Unicode system.
I dowloaded the Role from QA server and tried to upload into DEV box.
I am getting the Error " File does not contain valid data".
However, when I downloaded the Role, it was done successfully.
Please let me know if anyone has that problem.
Thanks,
From
PRANAVThis is what I see here.
DATE 20090716 131756RELEASE 700LOADED_AGRS Z_BI_HR_REPORTING_FUNCTIONALAGR_DEFINE 210Z_BI_HR_REPORTING_FUNCTIONAL PTHAKER 20080523131557000000000000000PTHAKER 20090709142400000000000000000AGR_TCODES 210Z_BI_HR_REPORTING_FUNCTIONAL TRRRMX X 00000AGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000001S_RFC T-BD90003500 U O000004Authorization Check for RFC AccessAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000002S_RS_AUTH T-BD90003500 U O000013BI Analysis Authorizations in RoleAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000003S_RS_COMP T-BD90003500 U O000016Business Explorer - ComponentsAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000004S_RS_COMP1T-BD90003500 U O000023Business Explorer - Components: Enhancements to the OwnerAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000005S_RS_FOLD T-BD90003500 U O000029Business Explorer - Folder View On/OffAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000006S_RS_HIER T-BD90003500 U O000032Data Warehousing Workbench - HierarchyAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000007S_RS_ODSO T-BD90003500 U O000038Data Warehousing Workbench - DataStore ObjectAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000008S_RS_PARAMT-BD90003500 U O000045Business Explorer - Variants in Variable ScreenAGR_1250 210Z_BI_HR_REPORTING_FUNCTIONAL 000009S_TCODE T-BD90003500 S O000009Transaction Code Check at Transaction StartAGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000001S_RS_COMP T-BD90003500 RSZCOMPTP CKF U O000021AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000002S_RS_COMP T-BD90003500 RSZCOMPID * U O000020AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000003S_RS_COMP1T-BD90003500 RSZCOMPID ZHCM* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000004S_TCODE T-BD90003500 TCD RRMX S O000010AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000005S_RS_HIER T-BD90003500 ACTVT 71 U O000033AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000006S_RS_HIER T-BD90003500 RSHIENM * U O000034AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000007S_RS_HIER T-BD90003500 RSIOBJNM * U O000035AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000008S_RS_HIER T-BD90003500 RSVERSION * U O000036AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000009S_RS_PARAMT-BD90003500 PARAMNM * U O000047AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000010S_RS_COMP T-BD90003500 RSINFOAREAZPA_ECM* U O000018AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000011S_RS_ODSO T-BD90003500 RSINFOAREAZPA_ECM* U O000040AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000012S_RS_COMP1T-BD90003500 RSZCOMPID ZPAOS* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000013S_RS_ODSO T-BD90003500 ACTVT 03 U O000039AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000014S_RS_COMP1T-BD90003500 RSZCOMPID ZPAPA* U O000025AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000015S_RS_ODSO T-BD90003500 RSODSOBJ * U O000041AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000016S_RS_ODSO T-BD90003500 RSODSPART DATA U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000017S_RS_ODSO T-BD90003500 RSODSPART DEFINITION U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000018S_RS_ODSO T-BD90003500 RSODSPART EXPORTISRC U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000019S_RS_ODSO T-BD90003500 RSODSPART UPDATERULE U O000042AGR_1251 210Z_BI_HR_REPORTING_FUNCTIONAL 000020S_RS_COMP T-BD90003500 ACTVT 03 U O000017AGR_1251 -
Hello All,
I am working on reading TDMS Index files into Matlab. So far i have been fairly successful in reading them when the data has been acquired for a short period of time (checked at 2 min). However when a 15 minute data has been acquired, in a few segments the meta information is not present but a variable in the header info for that particular segment says raw data is present. Does anybody know if sometimes meta information is not available but the raw data is actually present (segment wise) in the TDMS file?
Many Thanks,
VThat means the segment shares the same meta information with the previous segment. It doesn't have any new properties. Its raw index information is the same as previous.
You could use the meta information of the previous segment to read the raw data of this segment. Hope this helps,
Message Edited by Yunzhu on 08-03-2009 08:45 PM -
Infopath 2013 SOAP Web Service Data Connection - Error: The file is not a valid XML file
Here are the steps to replicate the issue I’m having when adding lists.asmx or any other SharePoint web service in InfoPath 2013. This web service opens fine in the browser from my desktop. My account is a farm administrator and is added to the
web application’s User Policy. I can use these services just fine using Nintex 2013 Workflow.
Open InfoPath Designer 2013.
Select Blank Form and click Design Form button.
Click “Data” tab.
Click “From Web Service” and select “From SOAP Web Service”
Enter https://mysiteurl.com/_vti_bin/lists.asmx?WSDL for the web service definition.
Click Next.
Windows Security window pops up.
Enter a credential. I tried both my account and the farm account. My account is a farm admin and is added to the web application’s User Policy with Full Control.
Click OK. It prompts for credential multiple times.
I get below this error messages:
Sorry, we couldn't open https://mysiteurl.com/_vti_bin/lists.asmx?WSDL
InfoPath cannot find or cannot access the specified Web Service description.
The file is not a valid XML file.
Not enough storage is available to process this command.
We have a project that is in need of these services using InfoPath so any help is greatly appreciated.Hi Brian_TX,
For your issue, try to the following methods:
Change your service binding in web.config to:binding="basicHttpBinding". It seems in VS it defaults to wsHttpBinding.
Replace all instances of "parameters" from the web service wsdl with the name "parameter"
There are some similar articles about the issue, you can have a look at them:
http://www.infopathdev.com/forums/t/23239.aspx
https://social.msdn.microsoft.com/Forums/office/en-US/621929c3-0335-40af-8332-5a0b430901ab/problems-with-infopath-web-service-connection?forum=sharepointcustomizationprevious
https://social.msdn.microsoft.com/Forums/en-US/5fa5eca8-f8d7-4a2e-81ba-a3b4bdcfe5af/infopath-cannot-find-or-cannot-access-the-specified-web-service-description?forum=sharepointcustomizationlegacy
Best Regards
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] -
Whenever i try to access any folder on my computer(Windows 7), it tells me "Windows
cannot access the specified device, path, or file, you may not have appropriate permission to access the item",
this happens even for My
Computer and Control Panel. It's driving me nuts! I'll be honest here, I was trying to uninstall Visual
Studio 2013 Communityfrom my computer by going to Programs
and Features but for some reason, it was getting stuck at "Configuring
Your System". After trying it numerous times, I went to the visual studio installation directory, and removed
the installation files from there. I even removed the files from the C:\Program
Data folder, then i went back to Programs
and Features and tried to remove the listing there, but I got a dialog box saying "you
don't have sufficient access to uninstall visual studio" . I googled this problem and found this solution
(http://superuser.com/a/174198)
then i tried using the solution, I used SubinAcl and
changed the registry permissions as mentioned in the solution and ended up like this!
All the access permissions are set correctly (that's what I can make out...)
Please Help!Hi
Some required information are needed for us to help you.
Hi NabeelOmer,
We wonder if you have taken any action such as system restore after this issue occurred.
You might also try this command to restore your access control list.
Run this command to navigate to the drive letter, example is D
D:
To reset all permissions, run this command
icacls * /reset /t /c /q
Visual Studio is a very invasive program and which provides the ability to enumerate projects and solutions for system, user should never try uninstalling it manually without any guidance.
Visual Studio made changes for your whole system, if the file has been moved or deleted this error would occur.
Since you mentioned that you get this error almost everywhere even in control panel. We suggest you repair/reinstall your Visual Studio first and check if it could be fixed.
How to: Repair Visual Studio
https://msdn.microsoft.com/en-us/library/aa983433%28v=vs.90%29.aspx?f=255&MSPPError=-2147217396
Regards
D. Wu -
Firefox would not load Yahoo home page properly, checked add ons and plugins-no problem. So unistalled. When reinstalling, went through until the end, then I get:
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access this item.
I went through the Help section on this page, even to right clicking the file and "run as administrator". It went through and restarted the computer. When I went to look for the program, it wasn't listed in All programs. I searched files and the only thing there was the same message as above.Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
unable to access firefox. I receive the following message" Windows can not access the specified device, path or file. You may not have appropriate permission to access. I restored the system to an earlier date when I could access Firefox. I removed an re-installed firefox no changes.
Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
How do I move a movie I have synced from iTunes into the "Movies" tab of the Video App? I need to access a slideshow I made in IMovies and may not have WiFi. I did it once, but can't figure out how to do it again! The file is an m4v. Thank you!
Im just guessing but it seems like you would have to get your movie into the correct folder on a computer then use iTunes to sync it to your iPad. If you've synced to a computer and have movies then on your computer should be a folder with the movie in it. You could export your iMovie to something like Dropbox then download from Dropbox to the folder you think it needs to be in the sync your iPad again. Again this is just a guess. Others may have a better answer.
-
Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
ThanksHi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support -
When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.
Any suggestions please?
-
I need to publish to a local folder on my desk top and I am getting this error message.
can’t create the file “header.jpg.” The disk may be damaged or full, or you may not have suuficient access priveleges.
Please help... I need to copy to a disk... it was working fine until I attached a big project, I tried to delete the project, but still not workng.Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
Question- Cannot access to Itunes after downloading photos. Message was "Windows cannot access to the specified device, path or file. You may not have the appropriate permissions to access the item". Plse advise
Do you get this message when you're trying to sync apps?
-
Error #2046: The loaded file did not have a valid signature in flex 4
As part of our CI build, the ant script that builds the client side (flex 4) projects also runs a set of FlexUnit4 tests on the deployed project. Most of the tests work but a few fail with this error
RSL
http://local.foo.com/bar/com/blah/components/someComponent/framework_4.1.0.16076.swz failed to load.
Error #2046: The loaded file did not have a valid signature.
The build machine is running Ununtu 10.10 with Firefox 3.6 and Flashplayer 10.2. If I run the exact same set of tasks, accessed from the same URL in windows everything passes with no problem. After some searching I did run across this thread: http://forums.adobe.com/message/2747415#2747415 but when I went looking for the libflashsupport.so file mentioned, the Ubuntu docs seemed to indicate that it was no longer needed.
I'm at my wits end here. Is libflashsupport.so actually needed in Ubuntu 10.10 and if so where would I find it? If not does anyone know of another issue that could be responsible for this?hello,
I have the same issue, Ubuntu 10.10, flashplayer 10.3rc1
mxmlc SimplePrj.mxml -debug=true -benchmark=true --target-player=10 -output ../deploy/SimplePrj.swf
mxlc verbose:
Loading configuration file /home/.../flex-config.xml
Initial setup: 79ms
start loading swcs 9ms Running Total: 88ms
Loaded 34 SWCs: 740ms
precompile: 1062ms
Required RSLs:
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/framework_4.5.0.20967.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/tlf/2.0.0.232/textLayout_2.0.0.232.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/spark_4.5.0.20967.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/sparkskins_4.5.0.20967.swz with 1 failover.
http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/mx_4.5.0.20967.swz with 1 failover.
Files: 540 Time: 3380ms
Linking... 27ms
SWF Encoding... 18ms
/.../SimplePrj/deploy/SimplePrj.swf (80059 bytes)
postcompile: 45ms
Total time: 4259ms
Peak memory usage: 81 MB (Heap: 62, Non-Heap: 19)
I had to copy the swz to deploy folder since failovers are not yet available.
* accessing from windows machines it loads swz without complaints.
Jaco
Maybe you are looking for
-
Audio on IPad is not working. Any ideas what might be wrong. Yes, I have the volume turned on!
-
BAPI to update Accounts Recievable
Hi, is there any BAPI to update AR entries for a customer along with the GL. Regards, vijay.
-
Illustrator won't run, instead AAM tries to run
Hi all, When I try to run an application form CS6, e.g. Illustrator or InDesign, they won't. Instead the Adobe Application Manager tries to run, but hangs/freezes. I need to force-quit AAM, but then again, none of the CS apps won't run/start, and AAM
-
Ok i apologise in advance because i know there's a heap of threads on this app already, but i just installed it for the first time. I've done the 'configure' tab with access point etc, but have two questions: What's 'connection mode - polite, rude, h
-
We signed up for a Reader Integration Key license a few years ago. A bug has recently been found in our plugin, so we fixed it but when we try to sign the plugin we get a "can't update resource in plugin" error. Are the keys for Reader 9 different fr