Unrecognised system type error when trying to flash bios

 Hey,
 I need your help again.I just tried to update my bios (j100 8256g4g motherboard) from 42KT42AUS to 42KT47A.
When i boot the image it gives me the error : Unrecognised system type.The flash update cannot continue.Press ctrl+alt+del to restart.Thanks!

hi john12,
Just to verify, is your machine type included in the list below? If not, this is most likely the reason why the BIOS update won't continue.
Flash BIOS update - 3000 J100 (type 8252, 8253, 8254, 8453, 8454, 8455)
You can find the MTM (Machine Tpe Model) printed on the tower or by typing dxdiag on a command prompt / run dialog box.
- Link to picture
- Link to picture
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Receiving non system disk error when trying to install Windows 8.1 full version on Mac Mini

    I am trying to install Windows 8.1 full version on a Late 2012 Mac Mini using OS X 10.9.2 using boot camp.
    The windows partion has been created  but when the mac mini reboots I receive a Non System Disk error. Press any key to continue
    Please could someone assist with my problem

    Thanks for that information, I removed all the external devices except the Superdrive. 
    Ran Boot camp again, created the MS Dos partition, and the mac restarted.
    Now I have received the "No bootable device -- insert boot disk and press any key"
    Please help

  • "Service 'Apple Mobile' (Apple Mobile Device) failed to start.  Verify that you have sufficient privilages to start system services" error when trying to install newest Itunes program.

    I am trying to install the newest Itunes program and get the following error.
    Service 'Apple Mobile Device' (Apple Mobile Device) failed to start.  Vertify that you have sufficient privileges to start system services.
    I've tried several times including uninstalling itunes and restarting the process.
    At one point I got an error 7 and downloaded and ran "dotNetFx40_Full-x86_64
    Please help me.
    Wendi

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Re: System 5 error when trying to start database control for 11g db windows 7

    i have the same error "https://localhost:1158/em/console/aboutApplication Starting Oracle Enterprise Manager 11g Database Control ...Error de sistema 5." i have installed Windows 7 ultimate, Oracle 11.2.0.1. What should i do?

    1008385 wrote:
    i have the same error "https://localhost:1158/em/console/aboutApplication Starting Oracle Enterprise Manager 11g Database Control ...Error de sistema 5." i have installed Windows 7 ultimate, Oracle 11.2.0.1. What should i do?
    You should start your own thread.
    How do I ask a question on the forums?
    SQL and PL/SQL FAQ

  • Illegal start of type error when adding for loop to applet

    I have typed the following applet to print a horizontal row of stars with the length entered by the user (i.e. user enters 4 and applet prints out 4 stars in a row). Here is my code:
    import java.awt.Graphics;
    import javax.swing.*;
    public class Histograms extends JApplet
           String input = "";
            int number;
         public void init()
              input = JOptionPane.showInputDialog ( null,
              "Enter a number\nbetween 1 and 30:" );
              number = Integer.parseInt( input );
         public void paint ( Graphics g )
              for ( int counter = 1; counter <= number; counter++ )
                                    System.out.print( "*" );
               System.out.println();
    };Now I am trying to make it do this 5 times, so it seems like just surrounding the init and paint methods in a for loop (i.e. for ( int i=1; i <= 5; i++ ) ) would do the trick but when I do that I get an illegal start of type error when trying to compile. Does anyone know why this error would show up. The most common reply to questions of this sort seems to be to check the closing braces but I have checked very carefully after adding the for loop and don't see any problems with mismatched braces. Could you please help me get on the right track as to how I can make this applet print a horizontal row of stars five times? All help is appreciated.

    Hello JTMOBOP:
    You were correct in figuring that I was trying to get the applet to print five rows of stars of different length according to five different inputs from the user. I tried your suggestions, and the code now does compile and run, but it still does not run properly (i.e. only asks user once for input and displays row of stars but does not show an input dialog again). Here is the code I have retyped:
    import java.awt.Graphics;
    import javax.swing.*;
    public class Histograms extends JApplet
       String input = "";
       int[] number = new int[5];
       public void init()
          for ( int i = 0; i < 5; i++ )
             input = JOptionPane.showInputDialog ( null,
                "Enter a number\nbetween 1 and 30:" );
             number[i] = Integer.parseInt( input );
       public void paint ( Graphics g )
          for ( int i = 0; i < 5; i++ )
             for ( int myNumber = 0; myNumber <= number; myNumber++ )
    System.out.print( "*" );
    System.out.println();
    Any ideas what's going on here?
    Also, your comments about not being able to loop a method make sense. Thank you for the input so far.

  • Getting error when trying to create Exchange Connector in System Center Service Manager 2012

    Getting error when trying to create Exchange Connector in System Center Service Manager 2012
    The connection to the server was unsuccessful. Please check the server name and/or credentials entered.
    Additional Information: The server URL is not accessible or the user does not have permission to access it (message: The request failed. The remote server returned an error: (401) Unauthorized.
    Warm Regards, Pramod Kumar Singh Manager-IT

    Someone sorted out this issue by installing API 1.2 and copying the dll files to the service manager server ,service folder and replacing it with API 2.0 dll files.
    Also, your question is related to SCSM, please post at SCSM forum if you have further question.
    Juke Chou
    TechNet Community Support

  • Runtime error when trying to use Thinkvantage system updater

    I get a runtime error when trying to use the Thinkvantage system updater.Have tried it numerous times and this is the exact message:
    "Runtime error!
    Program:C:\Program Files\Lenovo\System Update\tvsu.exe
    This application has requested the Runtime to terminate it in an unusual way.
    Please contact the application's support team for more information."
    Can somebody please help me to get the Thinkvantage system updater working properly?
    Thanks-George
    This issue has since been resolved.Thanks-G

    I'm getting the same error.   I tried reinstalling system updater but it didn't help.

  • 'System Error' when trying to save Form Manager Registry Settings

    Hi,
    trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
    > System Error
    >
    The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
    Has anyone had this error as well?
    The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
    SpyJMSException.
    Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
    Regards,
    Steve

    We are using JBoss 3.2.5.
    Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
    Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

  • I have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    i have a system error when trying to open my itunes on my laptop.  Should I unistall and reinstall itunes?

    The first error comes when i open my laptop:
    APSDeamon.exe -  System Error
    The program cannot start because MSVCR80.dll is missing from your computer. Try reinstalling....
    when I try to open Itunes, it says:
    iTunes.exe
    iTunes was no installed correclty, please re-install itunes
    Thanks!
    Annabel

  • Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.

    Currently using Flash Pro CS5,  getting error when trying to open CS4 file.  Error is "Slides and Forms documents are not supported in this version of Flash. Please open in previous version.  Has there been a fix or patch to this issue or do I have to convert back to CS4 to open the file?

    Having the same problem in CS6.  I can tell you that converting back to CS4 will NOT solve the problem.  It seems when support for backward compatibility is discontinued, there's just no way to get
    any help at all?  Absolute failure to provide any user support so far...

  • Action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can

    action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks

    Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
    Thanks,
    Sunil

  • Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • Error when trying to access the RBAC User editor and Message tracking

    Hi,
    I am getting an error when trying to access the RBAC User editor and Message tracking on the Web Mgmt interface. I verified that the admin account trying to access is in the Organization Management group and has the correct Role Assignment Policy applied.
    I searched through this thread below and saw that matching the msExchRoleLink and msExchUserLink attributes fixed the issue. 
    https://social.technet.microsoft.com/Forums/exchange/en-US/fc568cc6-8691-4127-b70b-bcc82f9b1f7f/first-2010-cas-server-no-administrator-rights-emc-permissions-gone?forum=exchange2010
    However I have another environment where this is not the case and works just fine; the msExchUserLink attribute has a value of CN=Organization Management,OU=Microsoft Exchange Security Groups,DC=Domain,DC=Local which is different as per the issue outlined in
    the above thread so I am not convinced that this will work and also don’t want to blindly edit something in adsiedit without being sure.
    I then checked the event logs on the server and saw the below error logged;
    Current user: 'Domain/Server Services Accounts/administrator'
    Request for URL 'https://server.domain.com/ecp/default.aspx?p=AdminDeliveryReports&exsvurl=1' failed with the following error:
    System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the
    page. Please contact your administrator for the required credentials. For new credentials to take effect, you have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       --- End of inner exception stack trace ---
       at System.Web.UI.Page.HandleError(Exception e)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
       at System.Web.UI.Page.ProcessRequest()
       at System.Web.UI.Page.ProcessRequest(HttpContext context)
       at ASP.default_aspx.ProcessRequest(HttpContext context)
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Microsoft.Exchange.Management.ControlPanel.UrlNotFoundOrNoAccessException: The page may not be available or you might not have permission to open the page. Please contact your administrator for the required credentials. For new credentials to take effect, you
    have to close this window and log on again.
       at Microsoft.Exchange.Management.ControlPanel._Default.CreateNavTree()
       at Microsoft.Exchange.Management.ControlPanel._Default.OnLoad(EventArgs e)
       at System.Web.UI.Control.LoadRecursive()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    I then had a look at the IIS permissions for ecp and owa. The account did not have permissions so I added them there but still got the same error. I’ve also tried all of the above with a newly-created account but still got the same issue.
    Any ideas as to what the above event log is specifically referring to?

    Hi,
    From your description, I would like to clarify the following thing:
    If you want to search message tracking logs, the account you use should be a member of the role groups below:
    Organization Management role group, Records Management role group, Recipient Management role group.
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • App File Server connection error when trying to run a BI Publisher report..

    hello Gurus...
    As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
    What does our DBA need to do..?
    error message reads..
    Template code: SUARXASR
    Template app:  AR
    Language:      en
    Territory:     GB
    Output type:   EXCEL
    [5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
    oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
    at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
    at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
    at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
    at  oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
    many thanks for looking..
    Steven

    nobody experienced this before..?

  • I get a assertion error when trying to up load adobe lightroom have followed the instruction on the adobe site to fix the problem

    i get a assertion error when trying to up load ,lightroom have follow the instructions on the adobe site and it still does not work
    and ideas on how to fix the problem
    tk
    bigguy1965

    Hi,
    Can you Please provide Configuration of your XP, Win7 Machine [How to post a screenshot in the forum]?
    To check if Windows 7 Service Pack is already installed, follow the below steps:
    Click the Start button , right-click Computer, and then click Properties.
    The basic information about your computer page will open.
    To check if Windows XP Service Pack is already installed, follow the below steps:
    Click the Start button , right-click Computer, and then click Properties.
    Click System and Service Pack Information will be listed
    Please also attach log [Where do I find the Flash Player installation log on Windows?], [How to share a document] and Share the Current Version of Flash Player goto - [https://helpx.adobe.com/flash-player.html] and click on Check Now button, using about method can you place the screenshot.
    Meanwhile you can also try cleaning Application Temporary Data and Try again. [c:/users/username/appdata/local/temp folder - Microsoft Community], Due to some reason the Installer file is getting corrupted which might be blocking Flash Player Installation. After cleanup try using the offline Installer [Installation problems | Flash Player | Windows]
    Thanks
    Piyush

Maybe you are looking for