Unrecogniz​able status indicator for tour

I have a status indicator on my display, top left corner, which looks like a circle with an arrow pointing down towards the center, with red asterick and a 1 next to it.  I have opened every application I have and cannot figure out WHAT this one means.  Sometimes also my facebok icon shows 2 yet I dont have any that have not been opened or taken care of.  Is there a clear icon I can use? 
I have taken the battery out and rebooted and still there....can anyone please help?

Ok figured out finally it means there is an update to one of the applications....now my question is, NONE of my apps show that they need an update....I have opened each one and none have given me an update option....I would love to get rid of this indicator so can anyone please help?

Similar Messages

  • Network Connectivity Status Indicator for IPv6 works wrong in Windows 7 and Windows 8

    Hi Folks,
    I am working on testing Network Connectivity Status Indicator for IPv6 in Windows 7 and 8.
    Waht is "Network Connectivity Status Indicator(NCSI)" you can refer to https://technet.microsoft.com/en-us/library/ee126135%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
    I found that even if Network Connectivity Status Indicator detect IPv6 connection to http://ipv6.msftncsi.com/ncsi.txt failed.
    Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4.
    It will cause IPv6 fallback to IPv4 problem, that's 21 secs and 7 secs delay for fallback in Windows 7 and 8.
    Does anyone suffer the same problem?
    Or someone know how this works?
    Thanks!

    Hi Roger_Wang0214,
    "Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4."
    By default Windows prefers IPv6 over IPv4,we can manually configure the IPv4 prefer over IPv6 if it has result in any troubles.
    Here is a link for reference :
    Resolving Internet connectivity issues after World IPv6 Launch (June 6, 2012)
    https://support.microsoft.com/en-us/kb/2533454
    "The "Prefer IPv4 over IPv6" Fix it solution will configure your computer to prefer IPv4, instead of IPv6. By default, Windows prefers IPv6 over IPv4. If you are having problems using IPv6 to connect to some websites, this may resolve the
    problem."
    For a Windows 7 machine ,we can try the following fixit tool to configure IPv4 prefer over IPv6 .For a Windows 8.1 machine ,we can configure it referring to the manual part .
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
    If the DisabledComponents entry is unavailable, we can create it (DWORD (32-bit) Value).Then set a value with "0x20"to prefer IPv4 over IPv6 by changing entries in the prefix policy table.
    Here is a link for reference :
    How to disable IPv6 or its components in Windows
    https://support.microsoft.com/en-us/kb/929852
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Staffing status indicator for a position( whether vacancy open or filled )

    Hi Experts,
          I have a doubt regarding Staffing status indicator that has to be maintained for a position( whether vacancy open or filled ). When I m running the joining process for an employee I want the staffing status to be updated accordingly. How this is possible. Please advise.
    Regards,
    Tomesh

    Hi,
      You can use exit - EXIT_SAPFP50M_002 for achieving this task
    Regards,
    Manoj.

  • Status indicator for calendar events

    Calendar events can be set to busy, tentative or out of office. However, there seems to be now way to have a visual clue to what the status of an event actually is. (I am using an Exchange backed email account).
    Even in day-view mode there is no textual info that suggest the status. One had to open the event to check.
    Color is already used for different calendars, but possibly some other (graphical) clue could help manage such entries more easily and make one more productive.

    There doesn't seem to be a question. Boilerplate follows.
    FEEDBACK
    If you wish to raise issues with or suggest changes to Apple, then you need to talk to them directly. These forums, strictly user-user and for technical support issues, are not an avenue for that. Use the feedback forms set up for the various hardware and software packages:
    Feedback area of Apple Support: http://www.apple.com/feedback
    iPad Feedback Form: http://www.apple.com/feedback/ipad.html

  • Download of a fancy status indicator?

    Hey,
    I'm kinda new to Java, and just can't find a nice status indicator for my app. The idea is that the light must be green when my app is done running tasks in the background, and it must randomly blink and blipper when there are some tasks pending.
    It must be a simple green/red light, just like in WinZip. And I want to be able to set the blink rate if that's possible.
    It doesn't necessarily have to be Java code, if I can just find the graphics somewhere I can do the rest myself. I'm real bad at graphics... :D
    So who knows some nice download places for these small gadgets?
    Thanks alot in advance!
    Grub

    http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=greenball.gif+redball.gif

  • Messenger status indicator on a JSP page

    Greetings
    I would like to ask anyone, where can i find a status indicator for the most famous messengers eg. MSN, Yahoo, ICQ, IRC, Jabber. Actually there are two points i want to include to my JSP Page: 1. icons that indicate whether a user is offline or online, for each and every of his messengers (if any) 2. code or script that pops up the selected messenger, if the user i want to chat with, is online.
    Actually the second point i mention, is almost fullfilled, but my main problem is the online/offline indicator.
    Please help !
    Thanks in advance

    See for example Yahoo presence taglib in Coldtags suite:
    http://www.servletsuite.com/jsp.htm

  • Show only status indicator icon for Status List Web Part

    Is there anyway to show ONLY the traffic light status indicator option for the status indicator web part?

    Well heck! I didn't know you were being forced to suffer in Quirks Mode!
    Quirks Mode kicks in if a page doesn't have a <!DOCTYPE> tag as its first element, which might have happened if you have any custom master pages, or if you upgraded to SharePoint 2010 from 2007, reusing some of the default master pages.
    The fix appears to be to add a proper doc type declaration to the top of your masterpage (or to your standalone page, if it's been customized), before the opening <html> tag.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
    "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
    For reference:
    http://blogs.msdn.com/b/alimaz/archive/2010/01/10/sharepoint-2010-ribbon-and-quirks-mode-issue.aspx
    http://blog.tylerholmes.com/2008/08/quirks-mode-strikes-again.html
    http://heathersolomon.com/blog/archive/2008/01/25/DOCTYPES-and-SharePoint.aspx

  • Pull html from solarwinds for sharepoint status indicator.

    Hi everybody had a question not sure if this is possible. I want to put a status indicator image from Solarwinds on our sharepoint site. Im not sure what kind of html code that requires but let me try to explain.I need sharepoint to go and check the nodes site Here: http://solarwinds/orion/node.aspxI need it then to grab the nodes status in the html sourcehere:andTextthe status=1 decides if it is green or red 0 is offline 2 is redSo wants it grabs that 0, 1, or 2 I need it to give that to SharePoint so it can tell me if its status.I was then going to add a url to the pc name to take me out to solarwinds for more info.If anyone knows a way to do this let me know I have been looking into it for 2 days with no luck.
    This topic first appeared in the Spiceworks Community

    Thanks for your efforts and help.
    I implemented the above condition.Its working fine for several situtations except the below one.
    The client creates a ticket and the support team members are closing it with Root Cause and Resolution.
    The client is not satisified with the response and he is asking more clarity on the root cause and resolution.
    So again the support team members open the existing ticket and they are trying to modfiy the Root Cause and Resolution fields.At that time the if the support team memebers are not providing root cause and resolution(I mean they removed the exisitng root
    cause and resolution which was provided laready)then its failing.When i looked in to the workflow history i am getting values for empty multi line text box as
    <div class="ExternalClass9E8676C798FA4CCEA5B78BEC226D8881"><p> </p> </div>.
    <div class="ExternalClassDA7B4AE3074F4DE78FA582351C31485D"><p> </p> </div>        <div class="ExternalClassF487CA8EBABA46A688E138D0841D364C"><p>​</p>
    <div> </div></div>
    I have modified my workflow to check for above values also but still its not working.Any thoughts on this.I dont my workflow to fail under any situtations.
    Thanks, Vijay Arockiasamy

  • To Set Goods Receipt Indicator For Particular Line Items In SRM

    Hi All,
      i am working on BBP_DOC_CHANGE_BADI in SRM. i am trying to set the goods receipt indicator for particular line items based upon certain conditions. The values are being set in the badi. But when the Purchase Order is created in the backend R/3 i coudn't able to find the goods receipt indiactor being set..
    i used this field to set the GR indicator
      GR_IND = 'X'.  " Goods Receipt Indicator
    Can anyone help me in this?
    helpfull answers will be rewarded....
    Thanks,
    Murali

    To Murali and Christophe,
    I have set the GR and GR non val indicator in CREATE_PO BADI but I face the following situation :
    problem -
    In case of multiple account assignment in the shopping cart, the R/3 transaction ME21N sets these flags. 
    The flag status determined as per EBP conditions is lost.
    I need to retain the flag status as per EBP conditions even in this multiple account assignment scenario.
    proposed solution -
    - CREATE PO badi is already implemented in EBP and customised logic for GR and GR non valflag is in place.
    - I create user exit in R/3 backend system in ME21N transaction 
    - I make RFC call in this user exit to EBP and check the table BBP_PDPSET for the shopping cart.
    This is how I get the flag status as per EBP conditions and copy the same to R/3 thereby overriding the multiple account assignment check of the R/3 system.
    issue - 
    When I tried to verify that I can check the BBP_PDPSET table from R/3, I found that this table is not having entries for all the records in  CRMD_ORDERADM_I table.
    For which shopping carts will the BBP_PDPSET table not  be populated ?
    thank you in advance,
    Bhakti.

  • Status Change for Purchase order in Process Purchase order

    Hi All,
    We have implemented SRM 4.0 with Extended Classic scenario.
    SRM does provide standard status for Process Purchase order worklist (such as Ordered, Held, Error in Process etc.). Is there any BADI i can use to overright my own status message for the PO.
    To give brief background of the requirement. Client wanted status to be changed to "Cancel" For POs whose all the line items we have deleted or "Close" when Last delivery or Final Invoice check is ticked.
    I am aware that i can use BBP_DOC_SAVE_BADI as structure BBP_PDS_ITEM i can get items deletion indicator. But will i able to change the standard Status message?
    Presently even though all line items marked delete still shows PO as "Ordered" status.
    Kindly let me know if i can acheive with anyway.
    Thank you
    Ritesh

    Hi Masa,
    Thank you for your response. I have few doubts about the configuration which you have suggested.
    - Define Status schema for User status will create a status Profile in which i have to include my own status. In the document of Define Status Schema it specifies that After creating User profile you have to assign same profile to transaction types. (I.e. BUS2201 or BUS2121 etc).
    My concern is will my own status profile over-write the standard status which is coming? such as Ordered, Created, Transmission fail etc.
    If so then do i have to create status profile to include all the Standard Status message in it as well?
    - Other thing i found that Ordering PO goes through many standard status message (COMP, CRTD, CTRA, DCOM, ORDR) and always the last status in the Hearder will display on  ITS level. Is my understanding right?
    - I found that there is a standard system status message I1045 (BECN Cancel) Can i use this through BADI?
    Kindly let me know.
    Thank you once again.
    Regards
    Ritesh

  • Status Profile for Internal Order

    Hi,
    Please tell me during creation of new status profile for new internal order type under status I have mentioned LKD - Locked and PLIM - Write plan line item. What should be used its corresponding Business Transactions with No Influence, Allowed, Warning, Forbidden, No Action which i need your valuable suggestion for our new implementation project.
    Best Regards,
    Samrat

    Hi Anand,
    My query is while creating Status Profile in tcode OK02, there are various business transactions are available under status which one is No Influence or Allowed or Warning or Forbidd etc. I need to know the actual business transactions required for the status profile. Presently I have mentioned two business transactions which are Release and Write plan line item under status LKD(Locked). Release indicator is "Not Influence" and "Set". And Write Plan Line Items checked only "Allowed" as business transactions. But another user status "PLIM" I am not able to incorporte business transactons. While click on new entries A to W business transactions are appearing which are all "No Influence". But after saving the screen and back from the screen records(Business transactons) are not being saved properly.
    I want to know the actual reason... Kindly need your suggestion...
    Best Regards,
    Samrat Roy

  • Status Profile for the supply relationship Vendor

    Hi Experts,
    We have a requirement to maintain status profile for the supply relationship. we try here to just copy from standard but we don;t get through. since we are not able to assigned here Business transaction as well as when we assign this profile to the inspection type 01, system gives wanrning message that "Status profile QM_P_00X is not allowed for "Insp. lot with plan and char."
    Pl help me  to resolve this issue
    MV

    We have defined Status Profile QM_L_00X that is copy of  SAP defined status profile QM_L_003. we have maintained two status RRNR and QINF. In RRNR Maintained business transaction make usage decision :-disalowed (X) and set action (X) and result recording:- allowed(x)
    In QINF maintained business transaction close insp complete:-allowed(x) set(x) complete inspection short term :-allowed(x) set(x) and start inv post bef Usage decision:-disallowed(x) no action (x)
    this status profile is assigned to inspection type, inspection plan has been created , and mic is assigned which has indicator set required char, single value, print, LSL, Sampling Procedure.
    My Problem is when record inspection result and closed it.and go to for usage decision system doen not allow me to do UD ,
    mv

  • Status Indicator Light permanently off

    Hi there,
    I'm hoping someone can help me with this problem. I've set out some of the history too, as I have no idea whether this is hardware or software related. Apolgies for the length!
    1) The immediate issue is that the status indicator light at the front of my black Macbook stopped working today. When I shut the lid or press the sleep option on the Apple logo in the top left corner, it remains off, even though it does appear to go asleep (makes the waking up noise when I open the lid).
    2)I have followed the recommended procedures in Apple Help to re-set the PRAM and the SMC settings, and it made no difference.
    3)My battery says it's charged at 100%. Here's the profiler report:
    Battery Information:
    Model Information:
    Manufacturer: DP
    Device name: ASMB016
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0102
    Charge Information:
    Charge remaining (mAh): 4029
    Fully charged: Yes
    Charging: No
    Full charge capacity (mAh): 4036
    Health Information:
    Cycle count: 403
    Condition: Normal
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12504
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 25
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: No
    Current Power Source: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 20
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 10
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    ID: 0x0100
    Wattage (W): 60
    Revision: 0x0000
    Family: 0x0085
    Charging: No
    4) I have no idea whether it's related, by my hard drive failed completely 3 days ago and was replaced (mechanical failure - sudden onset of click of death, spinning beachball, turned it off, wouldn't turn on, no data recoverable). When the drive was replaced (by Apple, but not under warranty), I also upgraded from Leopard to Snow Leopard. The light seemed to work until today though.
    5) This is the third time the drive has failed in the same way and been replaced. The computer is 3 1/2 years old, and first failure happened about 7 months in. Second failure a year ago. Third three days ago. Apple say 'drives fail'. I am a very careful and unadventurous user of my MacBook. I do carry it around, but for large amounts of time it sits quietly on a table, using only licensed software to do not very challenging tasks. Does anyone have any ideas as to why 3 failures?
    6) Yesterday I installed Dragon Dictate for Mac 2.0, which seems to be full of bugs and keeps crashing. This morning it was hanging and I tried to force quit but couldn't. I was then able to quit it normally, but the force quit window was still open and I could neither cancel nor make it force quit, and had to shut down the computer and start again.
    7) It was after this that I notice the SIL issue, but can't say whether it was working immediately before. I know it worked initially after the Dragon install.
    Thanks in advance for any help.
    Message was edited by: gregormac

    I don't seem to be able to edit the post above, hence this update.
    I closed the lid and left the machine to sleep overnight, and when I woke up this morning the SIL light was on, and now appears to be working as normal each time I close it.
    So my question now is:
    a) If it happens again, is it something to be worried about?
    b)re my point 5): can anyone think what would cause three hard drive failures? In particular, if it's something I'm causing, I'd like to know how not to cause it!
    Thank you.

  • How reliable is the Battery Status Indicator?

    I have had my MacBook Pro for a month now, and I don't know if I can trust my battery status indicator a the top of the MacOSX screen
    It usually goes a lot shorter than the indicated percentage or the calculated battery life time.
    I have another issue with this MBP.
    Has anyone actually been able to use MBP for as close to 5 hours which is the battery life posted on the apple website?
    I set my MBP to lowest backlight, no programs or widgets running, wireless and bluetooth off and kept it one for hours. The battery lasted a about 3hours and 49 minutes. Is there something wrong with this battery?

    As you use your MBP on battery it collects information on your battery usage style and uses that to predict battery run times. based on that it's reasonable accurate providing you calibrate your battery ever 4-8 weeks or so. Also, the data it collects the more accurate it can predict your battery time.
    Once you start using your MBP differently though the accuracy can vary but should still remain "reasonably" accurate.
    I personally find the times reasonably accurate altough for the most part I run off the percentage rather than time.
    Has anyone actually been able to use MBP for as close to 5 hours which is the battery life posted on the apple website?
    No-one will ever get 5 hours. As you note from the specs it's "based on usage" or more to the point, it's non-usage. Those time are achieved by having it on my not being "used".
    Average battery times should range from 2.5-4 hours depending on your actual usage.

  • SRM PO failed: Indicator for GR-based invoice verification used not allowed

    Hi Friends,
        I have an issue with a specific PO failed to transfer from SRM to ECC. We are in ECS scenario, SRM 5.0 Service level 7.0. We are in process of SP upgrade but this issue occured in Production system which is still in old SP level(SP 7.0).
    when I check the App Monitor, I am see the following errors:  but the status shows Auto_Completed
    1. PO: Indicator for GR-based invoice verification used not allowed
    2. PO: Instance XXXXXXXXXX of object type PurchaseOrder could not be changed
    3.  PurchOrder XXXXXXXXXX: Purchase order still contains faulty items
    4.  PO XXXXXXXX: Indicator for GR-based invoice verification used not allowed
    I can see the PO copied over to ECC. but status in SRM PO shows 'Error in Process'.
      BBP_PD for object PO shows:  Created, complete, ordered, In Transfer to Execute, Change was Transmitted  as Inactive status.    Transfer Failed shows Active, Document completed, created.
    I checked BP Maintain  for the vendor and PO and its no different than other POs and Vendors except Vendor had 'Goods Receipt based Invoice Verification' indicator checked in SRM.
    I tried to simulate the same Material, Vendor with GR-IV indicator both on and off, it works fine. Ofcourse this is in Quality box with SP 15 level.
    So, I am not sure if SP level upgrade might help it or not? If there are any other means to test, please advise.
    thanks
    Rao

    I was wondering how I could liquidate the PO by either creating a new PO or ??.
    What you could do to revive the PO in question is that after the upgrade, and after a round of background jobs run for CLEAN_REQREQ_UP and BBP_GET_STATUS_2, ask the buyer to make a dummy change to the PO (for example, change the description of the PO) and order again. This would trigger the transfer to the backend again. And hopefully this time, no error would occur.

Maybe you are looking for

  • How do I reset the password for my MacBook Pro?

    How do I reset the password for my MacBook Pro?

  • Help on report base on stored Procedure with parameter in Oracle

    In Deski was able to get BO report from Stored Procedure if no parameters is required. When I tried to add a parameter to the Stored procedure does not return anything.   Your assistance is greatly appreciated. Here  is what I used perform the task.

  • Why can't I open apps?

    When I download apps from the internet (e.g. BetterTouchTool) that aren't packaged in a .dmg file (i.e. they are in an archive of some sort) I can't open them. Initially when I open them, it says 'Are you sure you want to open this application. It wa

  • Blank username field not allowed in authentication...

    Hi, a ihave a problem with built-in internet browser in N80. I need access some routers and access point by web interface, and one or other use blank username (only password is entered) to access it. But login popup from N80 web browser doesn't allow

  • Problem downloading elements 12

    Downloaded file 1 with no issues (ending with 7Z. Tried 2nd file  (exe) got error "file achive part elements 12 missing please download all parts"