Unrecognized Batter

It appears my battery is not recognized by the computer. In the battery pull down menu, I see an 'X' inside the battery icon, and when I click on the menu, I see a greyed out message 'No batteries available.' If I unplug the AC, the computer shuts down instantly, everything is lost, and I have to reboot with the AC plugged in. In the system profiler it gives the message "Battery Installed: No" and "UPS Installed: No".
I've tried a couple of things to fix it. I've tried resetting the PMU several times, but this does not help. Second, I've swapped my battery with another Macbook (which doesn't have any battery problems). The other Macbook doesn't recognize my battery, and my Macbook recognizes the other Macbook's battery. This is good. I think that narrows down the problem to the battery.
My question is: is there something I can do revive it or get the computer to recognize that it is indeed in the battery slot? I live in Nepal, and can't exactly go down to my nearest Apple store to get a new battery.

I'm not sure the problem in my case is with the logic board. I don't (yet) have problems with random shut downs.
When I put in a battery from another MB into the MB in which the "X" appears, the other battery is recognized, and behaves like a functioning battery. I can deplete the battery and then recharge it again. There is no "X."
When I put the battery that stopped being recognized in another MB, it isn't recognized on the other MB either. The "X" shows up. It seems like the battery just decided to quit. At least, I hope the solution is just the battery.
Havings said it doesn't sound like the logic board, after reading the discussion groups, I'm scared it's something more sinister -- like maybe the logic board fries the battery or something wierd like that.
In the mean time, I'm using one battery with two MBs, and just hope that the one remaining battery doesn't get fried. And that one day soon I'll be able to get a new battery to Nepal.

Similar Messages

  • Unable to migrate WE8ISO8859P1 to ALUTF8 *Unrecognized convertible date*

    Hi
    ..have followed all steps in migration guide
    create CSMIG
    take backup (used datapump)
    run cs scan
    stopped db
    startup restrict
    run csalter.plbthe script fails with error:
    Unrecognized convertible date found in scanner result
    database: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    scan output:
    scan.err file:
    Database Scan Individual Exception Report
    [Database Scan Parameters]
    Parameter Value
    CSSCAN Version v2.1
    Instance Name itempl
    Database Version 10.2.0.1.0
    Scan type Full database
    Scan CHAR data? YES
    Database character set WE8ISO8859P1
    FROMCHAR WE8ISO8859P1
    TOCHAR AL32UTF8
    Scan NCHAR data? NO
    Array fetch buffer size 10240
    Number of processes 3
    Capture convertible data? NO
    [Data Dictionary individual exceptions]
    [Application data individual exceptions]
    scan.txt:
    Database Scan Summary Report
    Time Started : 2010-06-20 23:48:40
    Time Completed: 2010-06-20 23:50:33
    Process ID Time Started Time Completed
    1 2010-06-20 23:48:41 2010-06-20 23:50:31
    2 2010-06-20 23:48:41 2010-06-20 23:50:31
    3 2010-06-20 23:48:43 2010-06-20 23:50:31
    [Database Size]
    Tablespace Used Free Total Expansion
    SYSTEM 488.38M 21.63M 510.00M 984.00K
    UNDOTBS1 20.94M 9.06M 30.00M .00K
    SYSAUX 349.44M 10.56M 360.00M 9.52M
    TEMP .00K .00K .00K .00K
    USERS 22.69M 1.06M 23.75M 10.00K
    EXAMPLE 68.25M 31.75M 100.00M 3.00K
    Total 949.69M 74.06M 1,023.75M 10.50M
    The size of the largest CLOB is 1625114 bytes
    [Database Scan Parameters]
    Parameter Value
    CSSCAN Version v2.1
    Instance Name itempl
    Database Version 10.2.0.1.0
    Scan type Full database
    Scan CHAR data? YES
    Database character set WE8ISO8859P1
    FROMCHAR WE8ISO8859P1
    TOCHAR AL32UTF8
    Scan NCHAR data? NO
    Array fetch buffer size 10240
    Number of processes 3
    Capture convertible data? NO
    [Scan Summary]
    All character type data in the data dictionary are convertible to the new character set
    All character type application data are convertible to the new character set
    [Data Dictionary Conversion Summary]
    Datatype Changeless Convertible Truncation Lossy
    VARCHAR2 2,983,218 0 0 0
    CHAR 1,097 0 0 0
    LONG 149,525 0 0 0
    CLOB 31,468 2,071 0 0
    VARRAY 22,366 0 0 0
    Total 3,187,674 2,071 0 0
    Total in percentage 99.935% 0.065% 0.000% 0.000%
    The data dictionary can be safely migrated using the CSALTER script
    [Application Data Conversion Summary]
    Datatype Changeless Convertible Truncation Lossy
    VARCHAR2 1,730,333 1,465 0 0
    CHAR 59,586 0 0 0
    LONG 0 0 0 0
    CLOB 41 12 0 0
    VARRAY 2,019 0 0 0
    Total 1,791,979 1,477 0 0
    Total in percentage 99.918% 0.082% 0.000% 0.000%
    [Distribution of Convertible, Truncated and Lossy Data by Table]
    USER.TABLE Convertible Truncation Lossy
    ITEMPLDB.EMP 1 0 0
    MDSYS.SDO_COORD_OP_PARAM_VALS 200 0 0
    MDSYS.SDO_GEOR_XMLSCHEMA_TABLE 1 0 0
    MDSYS.SDO_STYLES_TABLE 78 0 0
    MDSYS.SDO_XML_SCHEMAS 4 0 0
    OE.WAREHOUSES 4 0 0
    PM.PRINT_MEDIA 8 0 0
    SYS.EXPIMP_TTS_CT$ 8 0 0
    SYS.EXTERNAL_TAB$ 1 0 0
    SYS.METASTYLESHEET 80 0 0
    SYS.RULE$ 4 0 0
    SYS.WRH$_SQLTEXT 607 0 0
    SYS.WRH$_SQL_PLAN 532 0 0
    SYS.WRI$_ADV_ACTIONS 22 0 0
    SYS.WRI$_ADV_OBJECTS 418 0 0
    SYS.WRI$_ADV_RATIONALE 7 0 0
    SYS.WRI$_DBU_FEATURE_METADATA 90 0 0
    SYS.WRI$_DBU_FEATURE_USAGE 2 0 0
    SYS.WRI$_DBU_HWM_METADATA 17 0 0
    SYSMAN.MGMT_HC_OS_COMPONENTS 8 0 0
    SYSMAN.MGMT_HC_VENDOR_SW_COMPONENTS 8 0 0
    [Distribution of Convertible, Truncated and Lossy Data by Column]
    USER.TABLE|COLUMN Convertible Truncation Lossy
    ITEMPLDB.EMP|ENAME 1 0 0
    MDSYS.SDO_COORD_OP_PARAM_VALS|PARAM_VALUE_FILE 200 0 0
    MDSYS.SDO_GEOR_XMLSCHEMA_TABLE|XMLSCHEMA 1 0 0
    MDSYS.SDO_STYLES_TABLE|DEFINITION 78 0 0
    MDSYS.SDO_XML_SCHEMAS|XMLSCHEMA 4 0 0
    OE.WAREHOUSES|SYS_NC00003$ 4 0 0
    PM.PRINT_MEDIA|AD_FINALTEXT 4 0 0
    PM.PRINT_MEDIA|AD_SOURCETEXT 4 0 0
    SYS.EXPIMP_TTS_CT$|XMLINFO 8 0 0
    SYS.EXTERNAL_TAB$|PARAM_CLOB 1 0 0
    SYS.METASTYLESHEET|STYLESHEET 80 0 0
    SYS.RULE$|CONDITION 4 0 0
    SYS.WRH$_SQLTEXT|SQL_TEXT 607 0 0
    SYS.WRH$_SQL_PLAN|OTHER_XML 532 0 0
    SYS.WRI$_ADV_ACTIONS|ATTR5 11 0 0
    SYS.WRI$_ADV_ACTIONS|ATTR6 11 0 0
    SYS.WRI$_ADV_OBJECTS|ATTR4 418 0 0
    SYS.WRI$_ADV_RATIONALE|ATTR5 7 0 0
    SYS.WRI$_DBU_FEATURE_METADATA|INST_CHK_LOGIC 11 0 0
    SYS.WRI$_DBU_FEATURE_METADATA|USG_DET_LOGIC 79 0 0
    SYS.WRI$_DBU_FEATURE_USAGE|FEATURE_INFO 2 0 0
    SYS.WRI$_DBU_HWM_METADATA|LOGIC 17 0 0
    SYSMAN.MGMT_HC_OS_COMPONENTS|DESCRIPTION 8 0 0
    SYSMAN.MGMT_HC_VENDOR_SW_COMPONENTS|DESCRIPTION 8 0 0
    [Indexes to be Rebuilt]
    USER.INDEX on USER.TABLE(COLUMN)
    ******* need help..

    984437 wrote:
    Hi Sergiusz,
    I am also into a similar situation. CSALTER results into:
    Pl post details of OS and database versions, along with the parameters passed to the csalter utility.
    Checking data validity...
    Unrecognized convertible data found in scanner result
    PL/SQL procedure successfully completed.
    Checking or Converting phase did not finish successfully
    No database (national) character set will be altered
    CSALTER finished unsuccessfully.
    After this I tried altering the database character set:
    SQL> ALTER DATABASE CHARACTER SET INTERNAL_USE AL32UTF8;
    Database altered.
    This command is undocumented/unsupported and should not be used - it will likely corrupt your database beyond repair - hopefully you have a good backup of the database that you can recover from.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=INTERNAL_USE&objID=f50&dateRange=all&userID=&numResults=15
    >
    Is this a correct way ?
    I was able to convert the database character set but I still curious to know if it is the right way to do it.
    Any suggestion would be a great help.
    Thanks,Also, pl do not hijack an old post - pl post your issue in a new thread.
    HTH
    Srini

  • Unable to import jpg file: Error: This file is in an unrecognized format.

    I have an iMac 2009 with Mavericks 10.9.3 and iPhoto 11 (v 9.5.1) and am getting an error message trying to load 1000 .jpg photos from ScanCafe.  The error message is: this file is in an unrecognized format.
    I have tried the following but am still unsuccesful:
    1) Upgraded all software
    2) Disk Utility repair permissions.
    3) Rebooted system.
    4) Deleted com.apple.iPhoto plist files.
    4) Tried to import the photos into a new test library within iphoto.
    Interestingly, my son's MacBook is able to load the photos into iphoto.  His ancient laptop is using Mountain Lion 10.8.5 and the same iPhoto 11 (9.5.1).  I have also tried to upload the file from his computer to mine, but the same "unrecognized format" error is received.
    Does anyone have any suggestion

    That's a problem with the format of the photos sent to you by ScanCafe.  The original poster in this topic contacted ScanCafe and had new disks sent to him which solved the problem:
    Re: ScanCafe jpeg photo file unrecognized format in iPhoto, not Preview
    I suggest you contact Carl at ScanCafe and get replacement disks with correctly formatted files.
    OT

  • Iphone 5 batt draining like mad after ios 6.1.2

    Hi Guys,
    I am experiencing seriously bad batt life after upgrading to ios 6.1.2. I really regretted upgrading. Batt life was fine with ios 6.0. After this stupid update, my phone is losing like 10% batt every 1 hr of use. I am seriously very disappointed with Apple. If this is the kind of crap they give to their customers, i am seriously considering a switch to an android phone. For those who have not upgraded their os, please DONT upgrade. I have give up believing in Apple and their claims of upgrades being able to fix problems... because with each upgrade, things will only get worse.
    Adwordh

    Any way to prove this problem guys? This battery problem is driving me crazy...

  • MacBook Pro & USB frustration: Why is it that my USB files appear in an "unrecognized format" when I try to open them on my Mac?

    Hello, I recently bought a MacBook Pro and every time I insert my USB, it appears on the desktop. However, when I double-click it to open the files, the files appear in "an unrecognized format". They all end with this: ".lnk"...if it's a video file it ends with .lnk, if it's a picture file it ends with .lnk, if it's ANY document it ends with .lnk. I'm getting tired of this situation and I've only had this laptop for a week. Please, open my eyes and show me that the sacrifice I made to buy it was worth it. I wanted a Mac so bad, and now this is making me hate them and prefer PCs. What do I do??? How can I change that and make this laptop read these files??? Please help. I need to copy some video files from my USB to my Mac as soon as possible.

    An lnk file in Windows is a shortcut that points to the actual file. Rather than copy the actual files, you made a shortcut to them on your USB drive. Try going to the Windows machine and selecting the files then choosing Copy, change to your USB drive and choose Paste.
    If you were to open a Finder window and right click one of those files then choose Get Info, you'll probably find that it's way to small to contain the movie or whatever.

  • I have a MBP bought in june 2011. I need a good batt life. should i risk installing mountain lion

    So, yeah, the title says it all.
    I've updated my laptop to Lion quickly after use. I've had some bugs that have never dissapeared, like the cursor dissapearing, safari locking and closing itself, when it goes to sleep it hardly ever gives the full screen back after I press a button, just the little square around my default pic and where I should fill in my password. I've never seen them as much trouble, being used to a constant crashing windows before this one.
    Lately we have some internet issues, but that's not my laptops fault. I don't use proxies so I shouldn't have trouble with that.
    Let me quickly say that I use my laptop daily. I live quite an end from school and usually watch movies or make homework in the train up and back on my laptop. When I get to school, I just put it on during the first period, load it somewhere during the 3rd, and make it home and load it here. In school, I put it in 'sleep', so I don't restart it every lesson, I'm too lazy to do that. It's in constant use for usually 6 hours in school.
    Now, it came to my attention that ML gives some trouble with the battery life. And I can't afford to lose my battery life. That would make my life a lot more complicated, because by doing homework in the train I save a lot of time so I have some free time in the evening, which I usually also spent behind my computer.
    I'm downloading ML as we speak, but should I instal it? Or should I wait for a fix for this bug. I've heard from some people that the update makes their batt life better. Does the year you bought it matter, or are that just lucky people?
    BTW, if it crashes, I have a Time Machine back up and actually, I don't need it, because there's nothing on it. I copy everything to my HDD, just in case.

    This morning my MBP just woke up from sleep and is working without any glitches. I don't know what to say about this.

  • How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

    How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported.  The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

    You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
    If I upgrade to Yosemite will I be forced to go to the new Photos program
    No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
    Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

  • Schema Import failed :IMP-00008: unrecognized statement in the export file:

    Hi ,
    I was running a database schema import from a database DMP file.
    I encountered the following error in the log file that was getting generated :
    IMP-00008: unrecognized statement in the export file:
    All the tables got copied except for one. Now what I have thought of is to import that one table again after taking an export from the prod schema.
    But what about the functions,triggers,procedures ?? How do i bring all of them in the schema ?
    If reimporting the schema again the only option ?
    Thanks
    Kk

    Hello,
    In this order:
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023988
    Table Objects: Order of Import
    Table objects are imported as they are read from the export file. The export file contains objects in the following order:
    1. Type definitions
    2. Table definitions
    3.Table data
    4.Table indexes
    5. Integrity constraints, views, procedures, and triggers
    6. Bitmap, function-based, and domain indexes
    The order of import is as follows: new tables are created, data is imported and indexes are built, triggers are imported, integrity constraints are enabled on the new tables, and any bitmap, function-based, and/or domain indexes are built. This sequence prevents data from being rejected due to the order in which tables are imported. This sequence also prevents redundant triggers from firing twice on the same data (once when it is originally inserted and again during the import).
    For example, if the emp table has a referential integrity constraint on the dept table and the emp table is imported first, all emp rows that reference departments that have not yet been imported into dept would be rejected if the constraints were enabled.
    When data is imported into existing tables, however, the order of import can still produce referential integrity failures. In the situation just given, if the emp table already existed and referential integrity constraints were in force, many rows could be rejected.
    A similar situation occurs when a referential integrity constraint on a table references itself. For example, if scott's manager in the emp table is drake, and drake's row has not yet been loaded, scott's row will fail, even though it would be valid at the end of the import.

  • Imp-00008: unrecognized statement in the export file

    Hi All,
    I am trying to import an export from Oracle 8.1.7 source system to Oracle 11.2 using imp . I am getting the following errors may times during the import process.
    imp-00008: unrecognized statement in the export file
    The character set of Source data base is WE8DEC and the character set of target data base is WE8MSWIN1252 and i get the below statement during the start of the import
    import done in US7ASCII character set and AL16UTF16 NCHAR character set
    import server uses WE8MSWIN1252 character set (possible charset conversion)
    export client uses WE8DEC character set (possible charset conversion)
    export server uses WE8DEC NCHAR character set (possible ncharset conversion)
    The error imp-00008: unrecognized statement in the export file is it due to the Oracle version compatibility or due to Character set compatibility issue.
    I tried to create a new Database on same Oracle sever and i cant find WE8DEC in the list of character set to choose. Please help me on how to proceed.
    Regards,
    alen.

    934571 wrote:
    Hi Srini,
    Data is getting loaded correctly, but i get several of these error imp-00008: unrecognized statement in the export file messages during the import process, so i am not sure what is missing.
    Pl post the complete error message from the import log file.
    1) Is it possible to import the dump exported form oracle 8 into oracle 11?? Do we need to take any special care during the import ??
    Yes - no special requirements are needed.
    2) The Oracale Database character set it WE8DEC, but when i try to create a new database in 11 , i dont find that character set , is the character set obsolete now , if so what character set is super set of WE8DEC ??
    Pl post exact OS and database versions. Ideally you should be using AL32UTF8 for all new databases. WE8DEC is a deprecated characterset.
    See section 4.2.1 here - http://docs.oracle.com/cd/E11882_01/install.112/e24186/install.htm#BABFDDEA
    Thanks,
    Alen.HTH
    Srini

  • Unrecognized operation - using utl_dbws

    -29532 ORA-29532: Java call terminated by uncaught Java exception:
    javax.xml.rpc.soap.SOAPFaultException: Caught exception while handling request:
    unrecognized operation: {http://hristdb/MyWebService1.wsdl}rminfo
    Any idea?
    CREATE OR REPLACE PROCEDURE getRM AS
    V_TARGET_NAMESPACE VARCHAR2(100);
    V_ENDPOINT_URL VARCHAR2(1024);
    V_wsdl_URL VARCHAR2(1024);
    V_STRING_TYPE_QNAME sys.utl_DBWS.QNAME;
    V_number_TYPE_QNAME sys.utl_DBWS.QNAME;
    V_SERVICE_NAME VARCHAR2(400);
    V_PORT_NAME VARCHAR2(400);
    V_OPERATION_NAME VARCHAR2(400);
    V_SERVICE_QNAME sys.utl_DBWS.QNAME;
    V_PORT_QNAME sys.utl_DBWS.QNAME;
    V_OPERATION_QNAME sys.utl_DBWS.QNAME;
    V_SERVICE sys.utl_DBWS.SERVICE;
    V_CALL sys.utl_DBWS.CALL;
    V_PARAMS sys.utl_DBWS.ANYDATA_LIST;
    v_outputs sys.utl_dbws.ANYDATA_LIST;
    V_RETURN ANYDATA;
    BEGIN
    -- Set the Target NameSpace
    V_TARGET_NAMESPACE := 'http://hristdb/MyWebService1.wsdl';
    -- Set the End Point URL
    V_ENDPOINT_URL := 'http://hrist:8888/DatasetWS-rm-context-root/MyWebService1SoapHttpPort';
    v_wsdl_url := 'http://hrist:8888/DatasetWS-rm-context-root/MyWebService1SoapHttpPort?WSDL';
    -- Set the Service
    V_SERVICE_NAME := 'MyWebService1';
    -- Set the Port
    V_PORT_NAME := 'MyWebService1SoapHttpPort';
    -- Set the Operation
    V_OPERATION_NAME := 'rminfo';
    -- Convert the Service, Port and Operation to Qualified Names
    V_SERVICE_QNAME := sys.utl_DBWS.TO_QNAME(V_TARGET_NAMESPACE, V_SERVICE_NAME);
    V_PORT_QNAME := sys.utl_DBWS.TO_QNAME(V_TARGET_NAMESPACE, V_PORT_NAME);
    V_OPERATION_QNAME := sys.utl_DBWS.TO_QNAME(V_TARGET_NAMESPACE, V_OPERATION_NAME);
    -- Create a Service. The Service created here will be used to create a call
    -- to the Web Service.
    V_SERVICE := sys.utl_DBWS.CREATE_SERVICE(URIFACTORY.getURI(v_wsdl_url), V_SERVICE_QNAME);
    -- Create a Call to the Web Service. The call created here will be used to
    -- invoke the Web Services, using the End Point URL.
    V_CALL := sys.utl_DBWS.CREATE_CALL
    ( V_SERVICE,
    V_PORT_QNAME,
    V_OPERATION_QNAME);
    -- Set the SOAP Action Properties to use.
    sys.utl_dbws.set_property(V_CALL,'SOAPACTION_USE', 'TRUE');
    sys.utl_dbws.set_property(V_CALL,'SOAPACTION_URI', 'rminfo');
    sys.utl_dbws.set_property(V_CALL,'OPERATION_STYLE', 'rpc');
    -- set type of input and output parameters
    V_STRING_TYPE_QNAME := sys.utl_DBWS.TO_QNAME ('http://www.w3.org/2001/XMLSchema', 'string');
    -- Provide values for the Input Parameters
    v_params(0) := anydata.convertnumber(23);
    -- Set the Return Type
    sys.utl_dbws.set_return_type (v_call, v_string_type_qname);
    -- Set the Target End Point. The Target End Point is used to invoke the
    -- Web Service.
    sys.utl_DBWS.SET_TARGET_ENDPOINT_ADDRESS(V_CALL,V_ENDPOINT_URL);
    -- Invoke the Web Service
    v_return := sys.utl_dbws.invoke (v_call, v_params);
    -- v_outputs := sys.utl_dbws.get_output_values (v_call);
    -- Release the call to the Web Service. A Call to a Web Service is a
    -- Resource that needs to be released after the work is done.
    sys.utl_DBWS.RELEASE_CALL (V_CALL);
    -- Release the Service. A Service to a Web Service is a
    -- Resource that needs to be released after the work is done.
    sys.utl_DBWS.RELEASE_SERVICE (V_SERVICE);
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line(sqlcode ||' '||substr(SQLERRM, 1, 1000));
    END;
    /

    -29532 ORA-29532: Java call terminated by uncaught Java exception:
    javax.xml.rpc.soap.SOAPFaultException: Caught exception while handling request:
    unrecognized operation: {http://hristdb/MyWebService1.wsdl}rminfo
    Any idea?
    CREATE OR REPLACE PROCEDURE getRM AS
    V_TARGET_NAMESPACE VARCHAR2(100);
    V_ENDPOINT_URL VARCHAR2(1024);
    V_wsdl_URL VARCHAR2(1024);
    V_STRING_TYPE_QNAME sys.utl_DBWS.QNAME;
    V_number_TYPE_QNAME sys.utl_DBWS.QNAME;
    V_SERVICE_NAME VARCHAR2(400);
    V_PORT_NAME VARCHAR2(400);
    V_OPERATION_NAME VARCHAR2(400);
    V_SERVICE_QNAME sys.utl_DBWS.QNAME;
    V_PORT_QNAME sys.utl_DBWS.QNAME;
    V_OPERATION_QNAME sys.utl_DBWS.QNAME;
    V_SERVICE sys.utl_DBWS.SERVICE;
    V_CALL sys.utl_DBWS.CALL;
    V_PARAMS sys.utl_DBWS.ANYDATA_LIST;
    v_outputs sys.utl_dbws.ANYDATA_LIST;
    V_RETURN ANYDATA;
    BEGIN
    -- Set the Target NameSpace
    V_TARGET_NAMESPACE := 'http://hristdb/MyWebService1.wsdl';
    -- Set the End Point URL
    V_ENDPOINT_URL := 'http://hrist:8888/DatasetWS-rm-context-root/MyWebService1SoapHttpPort';
    v_wsdl_url := 'http://hrist:8888/DatasetWS-rm-context-root/MyWebService1SoapHttpPort?WSDL';
    -- Set the Service
    V_SERVICE_NAME := 'MyWebService1';
    -- Set the Port
    V_PORT_NAME := 'MyWebService1SoapHttpPort';
    -- Set the Operation
    V_OPERATION_NAME := 'rminfo';
    -- Convert the Service, Port and Operation to Qualified Names
    V_SERVICE_QNAME := sys.utl_DBWS.TO_QNAME(V_TARGET_NAMESPACE, V_SERVICE_NAME);
    V_PORT_QNAME := sys.utl_DBWS.TO_QNAME(V_TARGET_NAMESPACE, V_PORT_NAME);
    V_OPERATION_QNAME := sys.utl_DBWS.TO_QNAME(V_TARGET_NAMESPACE, V_OPERATION_NAME);
    -- Create a Service. The Service created here will be used to create a call
    -- to the Web Service.
    V_SERVICE := sys.utl_DBWS.CREATE_SERVICE(URIFACTORY.getURI(v_wsdl_url), V_SERVICE_QNAME);
    -- Create a Call to the Web Service. The call created here will be used to
    -- invoke the Web Services, using the End Point URL.
    V_CALL := sys.utl_DBWS.CREATE_CALL
    ( V_SERVICE,
    V_PORT_QNAME,
    V_OPERATION_QNAME);
    -- Set the SOAP Action Properties to use.
    sys.utl_dbws.set_property(V_CALL,'SOAPACTION_USE', 'TRUE');
    sys.utl_dbws.set_property(V_CALL,'SOAPACTION_URI', 'rminfo');
    sys.utl_dbws.set_property(V_CALL,'OPERATION_STYLE', 'rpc');
    -- set type of input and output parameters
    V_STRING_TYPE_QNAME := sys.utl_DBWS.TO_QNAME ('http://www.w3.org/2001/XMLSchema', 'string');
    -- Provide values for the Input Parameters
    v_params(0) := anydata.convertnumber(23);
    -- Set the Return Type
    sys.utl_dbws.set_return_type (v_call, v_string_type_qname);
    -- Set the Target End Point. The Target End Point is used to invoke the
    -- Web Service.
    sys.utl_DBWS.SET_TARGET_ENDPOINT_ADDRESS(V_CALL,V_ENDPOINT_URL);
    -- Invoke the Web Service
    v_return := sys.utl_dbws.invoke (v_call, v_params);
    -- v_outputs := sys.utl_dbws.get_output_values (v_call);
    -- Release the call to the Web Service. A Call to a Web Service is a
    -- Resource that needs to be released after the work is done.
    sys.utl_DBWS.RELEASE_CALL (V_CALL);
    -- Release the Service. A Service to a Web Service is a
    -- Resource that needs to be released after the work is done.
    sys.utl_DBWS.RELEASE_SERVICE (V_SERVICE);
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.put_line(sqlcode ||' '||substr(SQLERRM, 1, 1000));
    END;
    /

  • USB gaming mouse unrecognized by Windows 7 Pro (via BootCamp)

    Hey,
    I bought a Zowie EC1 Gaming USB mouse. But when I plug it into my MacBook Pro 15" running Windows 7 Pro (via BootCamp), then the mousewheel flashes blue shortly for 1 second or so, and the driver installation process starts. After awhile it says hardware unsuccesfully installed. And when I re-plug the mouse in the same USB port it says unrecognized.
    I think maybe it's just some buggy drivers? Anybody experienced something similar with other mice maybe? Or know how I solve this problem.
    Kind regards,
    Simon

    I looked around on the web and read a bit about your Zowie EC1. It's a very nice mouse that I need to put on my Christmas list
    But it seems that it should be recognized by Windows as a normal USB mouse and install generic drivers. I have a couple of questions:
    1) Are there any Windows Updates for your hardware waiting to be installed?
    2) Do you have all the Apple Boot Camp drivers installed? Apple just released 3.3 if you're not on Lion (which is 4.0)

  • I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

    I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

    Did you look in iTunes?

  • IPhoto says it cannot import my photos b/c they may be an unrecognized file or the file may not contain valid data. The operation could not be completed. Error code is: ImageCaptureCoreError-9905.

    Unable to download photos from my camera. iPhoto returns an error message that states: The following files could not be imported (they may be an unrecognized file or the files may not contain valid data). FILE NAME: 100_0490.JPG      REASON: com.apple.ImageCaptureCoreError- 9905.  WHAT'S UP WITH THAT?  Did not have a problem importing photos under the LEOPARD OS, however, now that I have upgraded to Yosemite 10.10.3 the iPHOTO app is not performing the imports.

    Are you using Photos, or iPhoto? Maybe you've got a corrupt file on your camera. I would try using the image capture application to import the bad picture to my desktop. If it works and the picture looks ok,  then delete that pic from the camera, then try to import into iphoto again. You can then import the pic it was saying was bad from your desktop.
    Or, try downloading all the pics using image capture and then import from the download folder.

  • When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    What version of iPhoto?
    What colour profile is the shot?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • IPhone unrecognized in Windows 7 & Mac -- does not show in iTunes

    Hey everyone,
    Just this week I was able to sync my iPhone 4 to my iTunes (Windows 7), but for some reason it is now completley unrecognized. I've already done the basics -- reset my phone, restarted my computer, reinstalled iTunes and have even attempted to reconfigure msconfig but nothing seems to work. I have also tried to sync it to my brother's MacBook on his iTunes, but again it only charges the phone but does not sync it at all. Apparently after doing some research, a common problem is to disable my wi-fi connection on my laptop and then attempt to sync it, but that doesn't work either. When I run iTunes Diagnostics, everything seems to be fine except the fact that iTunes cannot find the phone and sync it. My phone also used to show in My Computer but no longer does that.
    Any idea why my iPhone now cannot be found by Windows? I know it's not my USB ports, because I am using an external mic and mouse and have even tried switching to all USB ports. My drivers are up to date. As you can see I've virtually done (what seems like) everything to sync my phone but I just can't fix this issue. I'm thinking it's an issue with the iPhone itself as it does not sync to anything.
    Please help!

    Shameless bump. Someone please help!

Maybe you are looking for

  • HT5663 How to store PDF files in iCloud?

    Is there a way to store PDF files in iCloud? I see that Preview supposedly stores PDF's in iCloud, but when I try it, I cannot find the file in iCloud.

  • Facelets + tomahawk + SJSAS

    Hi I had posted this in the wrong forum. So I apologise if this looks familiar to some of you. I am creating a JSF application using Facelets and tomahawk, deploying on SJSAS 8.1. I have noticed some weird behavior: 1. If there is a problem with a to

  • Mail client settings for Sony Z2 tablet

    Tried to use standard mail client. However incoming mails are ok and are being downloaded. As for outgoing mails...here there is no synchronization with other devices, if You send mail there, it will appear in outgoing folder, if some message is sent

  • Satellite L350D - WLAN not working after recovery disk

    Hello there I just got a L350D. I ran the Recovery Disk tool, without any other programm running. It was on a good way of finishing the second disk and than: BAM! blue screen. Since the start up, my LAN and WLAN is not working. It always says "WLAN 2

  • Desktop Manager & script

    Hi, I have been experimenting with Apple script to enable voice activation of some features. Turning Bluetooth on and off using a script from the forum was a good learning exercise. However I have a problem; I'm using Richard Warehams Desktop Manager