Unrecognized pictures solution-it works

For all those unrecognized pictures you can do nothing with thanks to Adobe Photoshops sleezy way of screwing us and forcing us to upgrade. May you all switch to Kodak Easy Share or some other photo software after I give you the following and time consuming way to retrieve those lost pictures. Here it is:Go to photoshop and double click on the picture you want to salvage. When the computer starts to Browse, click cancel. Now push the PrtScn button on your keyboard(toward the upper left corner)but don't expect anything to happen. Now open your Paint program and click on Edit then Paste (your picture should be there) Now click on the Select box (the dashed rectangular box in the upper left side of Paint)and trace the outline of your picture Now click Edit then Cut Now click File then New (computer asks to save changes, click No) Now click Edit, then Paste, then File, then New (comp will ask again to save changes, click Yes) Now put that picture you thought was gone forever in a folder of your liking.
Yes, you're all very welcome!

> I believe the Starter Edition makes your pictures unrecognizable and you need to purchase an upgrade to avoid this problem
Having spent a lot of time on this forum and used this software a lot, I believe that you are incorrect.
Some people experience "disappearing pictures". Often this is simply because they assume that the images are "in" PSA SE and delete the files. PSA SE just catalogs what is on the hard drive. I sympathize with those who suffer such a loss, but can only advocate backups.
Other people seem to lose image files and there is no clear idea where they have gone. I would like to figure this out.
I have nvere encountered anyone whose images have been rendered "unrecognizable" by PSA SE. Can you explain this at all?

Similar Messages

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Picture hyperlinks not working when published? Please help....

Some of the hyperlinks to my pictures do not work when I publish to my folder. I´ve tried to empty Safaris cache but it still doesn´t work. Please help me, pretty urgent....

hi briebrie,
this is common mistake, see my post in this thread:
http://discussions.apple.com/message.jspa?messageID=4004970#4004970
The work around is to leave iWeb default nav bar and header enabled, add your home made nav bar (outside/below of iWeb default nav bar).
Then turn off iWeb nav bar and header when you are done.

KT6 Delta Rebooting Issues - Solution that Worked for me

Hi
Solution that worked for me: Enabled SATA Controller which takes a while for it to detect SATA Drive and giving time for the system to warm up. I don't get that annoying message asking to restart Windows in safe mode, normal, & etc.
I've been having this rebooting problem lately. I tried everything from BIOS settings, checking drivers for problems, checking Windows XP, Power Supply, Checking Motherboard,and etc. I installed a fresh copy of Windows but still had that rebooting problem. When I got this MB 3 months ago, it was working perfectly and had no rebooting problmes. But its now fall in my place and the temp a bit cold.
I read about the temperature issue (20C). I disbaled the SATA controller because i don't have a SATA Drive.
Hope this will help others as well and for MSI to Fix the Problem.
Barton 2500+
Ati Radeon 9000 Pro
Maxtor DiamondPlus9 80 gig
Western Digital WBC 120 gig
LiteON 52x24x52
360W PS

No, i`m sure that trick it`s not working for me and for rest of us.
I did try all trick in the bios, and...

Thinkpad yoga - limited connection - intel 7260AC (with solution that worked for me)

limited connection issue
i'm new to the forum, sorry for bad english
i've a brand new rhinkpad yoga, with win 8.1 and intel ac 7260 wifi card
first of all the solution that worked for me is moving from WEP to WPA2 protection with the router
the problem was that i wasn't able to connect to internet using wifi
i got "limited connection" and i wasn't able to access internet at all
windows validated the connection and obtained an ip, but it wasn't then unable to access internet at all, i also wasn't able to access or ping the router.
i also got an error stating the lack of the default gateway, but this one seems to be resolved by windows check and repair procedures
my router had wep protection, and i used it with no issues with 2 android smartphones, an android tablet, a mac and a linux system, and in the past with windows 7 and vista systems.
i've searched for solution all the night and checked everything
- system and driver update (via usb thetering)
- various command to reset network configuration
- unchecking selected check box in energy saving tab inside wireless property panel
but the only one solution that worked was the move from WEP to WPA2
hope this helps
my first post, be patient...

From what I gathered, about the Y2P Limited Wifi issue, this problem is solved by configurating a router to meet the computer needs. Once done, to fully implement this fix, it is adviced that you carry this configured router and use it every where you go, like a power cord. When you go to Statbuck in the monrining, be sure they hook up your router and return it when you leave. Alternitively, this can be done at other venues like the airport, hotel, school, work, etc.
I really don't know why people keep wasteing their time. Lenovo has chimed in and said this is a router issue. That said, the aformentioned advice is a formulated fix. Shall we put an end to thiese topics and get the forum moving again past the wifi issues? Like said many times, this issue has been fixed using the above reccomendation.

Airtunes audio drop out solution that worked for me! :)

setup is DSL modem, AEBS main base station (software v5.6), AE (software v6.2), AE is in WDS mode as a remote base station. I am running OSX 10.4.3, and all software (itunes, etc) is updated current as of 6Nov2005.
using airport admin utility, i set both base stations to "g only" and still had audio drop outs. Then I left both of them on g only and set both of them on channel 5, (was on channel 10 before.) no airtunes drop outs!!
I have been audio drop-out free for a few days now and am cautiously optimistic- enough to post my solution. hope it works for you, too!

Thanks Bryan! Glad to hear you found a solution that works for you. Your suggestions are also among the many solutions previously posted in the mother of all discussions on this topic found at:
Muhannad Al-Khurafi, "Audio Drop while using airtunes", 10:38pm Jul 21, 2004 CDT

HP PSC 2355 Has anyone found a solution that worked ?

Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a lot of headaches setting it up. Seemingly, after downloading a latest 10.4 up-grade, I lost all functions with this 3 in 1 printer. I’ve done all the procedures on the HP site, purged everything HP on my computer relating to applications, and re-installed the software. However, the printer does not show up on the ‘Printer List’ in the ‘Printer Setup Utility. Error message stating that ‘No default Device Detected’ or, Error ‘Sorry, scanner could not be initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X (10.4.7) iMac G5 1.8GHz, 20in.

Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a
lot of headaches setting it up. Seemingly, after
downloading a latest 10.4 up-grade, I lost all
functions with this 3 in 1 printer. I’ve done all the
procedures on the HP site, purged everything HP on my
computer relating to applications, and re-installed
the software. However, the printer does not show up
on the ‘Printer List’ in the ‘Printer Setup Utility.
Error message stating that ‘No default Device
Detected’ or, Error ‘Sorry, scanner could not be
initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X
(10.4.7) iMac G5 1.8GHz, 20in.
I am not sure if you are having the same issue or not since you did post this back in Dec but itf it is still a ongoing problem after downloading updates to the Mac OS follow this docuemnt --------------------------------------------------> http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=422000&dlc=en&lang=en
And by the sounds of it i know you have gone though this document already
Download this driver it is the lates driver and it fixes alot of things
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=422000&lang=en&softwareitem=mp-42125-1
G4 Mac Mini Mac OS X (10.4.7)

How to get picture package to work again

I made the mistake of downloading the Yosemite operating system and now cannot get the picture package to work again. I have switched to 32 bit but this time it did not solve the problem. Again I really need help. I am using an iMac and have Photoshop version CS5.1
Mary

Did you look in the photoshop cs5.1 plugins folder to see if the ContactSheetII.plugin and WebContactSheetII.plugin are still there?
On some peoples systems, upgrading to Yosemite, for some reason, deletes some of the photoshop cs5/cs5.1 files.

Solution Manager: Work Log in E-mail message

Hi,
RE: Solution Manager: Work Log in E-mail message
I would like to add the work log to the e-mail that I am sending out. Has anyone done this? How can it be done?
Regards,
Leanne

Hi
Yes, I used the sap standard form - see details below. Good Luck.
Form Name                   CRM_SLFN_ORDER_SERVICE_01
Processing Class            CL_DOC_PROCESSING_CRM_ORDER
Processing Method           CRM_SRVORDER_EXEC_SMART_FORM
Archive Mode                1 Mail Only
Regards,
Leanne

HT201210 None of these solutions are working.

None of these solutions are working. I plug in my newly restored iPhone and under the category in iTunes, I have the option to click it. When I do so, I get an empty box on the screen, below a Apple logo on the left and a padlock on the right. Any ideas to solutions? I puzzled the people at my local Apple store.
Other than not connecting, my phone is fully functional. I can place calls and send messages, get online and fi my settings the way I want. I just cannot connect to any iTunes (I've tried three)!
I have the newest software on my phone and the newest upgrade of iTunes available.

What do you mean none of these options? What have you tried so far? Are you referring to the 5 R's described here: http://www.apple.com/support/ipod/five_rs/classic/
B-rock

TOSHIBA 24PB2V1 NO PICTURE BUT AUDIO WORK

I HAVE TOSHIBA 24PB2V1 NO PICTURE BUT AUDIO WORK
THE LED POWER LIGHT GREEN
BUT NO PICTURE
JUST SOUND WORK GOOD
It happened when the power goes when the TV works
When I tried to run again vanished's just a black screen without image
Data or information screen does not show

check the voltage of the inverter, it is likely a problem about his power or himself

Transfer from Lightroom to Photoshop for executing a picture does not work

Execute a picture from Lightroom to Photoshop das not work. Picture is not opened in Photoshop. What could be the reason?

First: Go to <Edit >Preferences >General tab / Prompts and click on <Reset all Warning Dialogs>.
Then do Edit in Photoshop again. Do you get a dialog box? What does it say?
And which version of Photoshop is this?
If it is not CS6 but a prior version, you have to select <Render using Lightroom>; <Open anyway> doesn't work with CS5 or earlier CS.
The reason is that CS5 has not the latest ACR, but Lr 4.3 has. That means that CS5 cannot open a Raw image sent from Lr 4.3.
The solution is to let Lr 4.3 create the PSD (or TIFF) and send it to CS5. This is done by selecting <Render using Lightroom>.

IPhoto quit unexpectedly. Tried different solutions, none worked. Any suggestions?

Hello,
I have a 2012 non-retina Macbook Pro running OSX 10.8.4 and iPhoto '11 version 9.4.3.
My iPhoto was running fine until about a month ago. And just last week when I tried opening it, I got the "iPhoto quit unexpectedly" message. Since then I have tried many solutions as suggested in the forum but none worked for me. Here are the list of things I tried.
1. Tried reopening.
2. Tried to create a new library, but it wouldn't let me create one.
3. Tried holding the cmd + option keys while opening iPhoto had no effect.
4. Tried downloading iPhoto Library Manager and rebuilding. It didn't work.
5. Tried running in safe mode. It didn't work.
6. Tried logging in using Guest account. It didn't work.
7. Tried completely uninstalling iPhoto (including system files and hidden files) and reinstalling. Still didn't work.
8. Tried restoring iPhoto from my Time machine backup from a month ago. No luck.
All these solutions I tried resulted in the same "iPhoto quit unexpectedly" message.
Could somebody please help me out? If you need further information please ask me.
Thank you.

3. Tried holding the cmd + option keys while opening iPhoto had no effect.
What options did you run from the iPhoto Fix window?
2. Tried to create a new library, but it wouldn't let me create one.
Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Looking for camera picture solution

Anyone knows which 3rd package can detect camera postions and take pictures or any solutions. Thanks
David

You can try the Java Twain API http://www.gnome.sk
It's a package which enables you to connect to your scanner or camera directly from a java application.
If you just want to see how Java Twain works with your scanner or camera:
- java (1.2 or higher for Windows, 1.3 or higher for Mac OS X) has to be installed on your computer
- a scanner or camera has to be installed on your computer
- download the trial package from http://www.gnome.sk
- unzipp it
- go to the examples directory of the unzipped package
- in Windows: doubleclick the runExampleShow.bat
- in MacOS:
- open the Terminal window
- change the working directory to the examples
- run .sh file (type ExampleShow.sh or sh ExampleShow.sh)
This will pop up the Twain Source Selection user interface. There, all your scanners and cameras which do have a twain driver should be listed. (About 90% of scanners and cameras on the market do have a twain driver for Windows, only a few do have a twain driver for MacOS.) Select one of them. The user interface of the selected scanner (camera) will appear. Confirm the scanning (you can set the scanning parameters first). The scanned image will be displayed in a separate window. To end the application, close that window.
Running different examples, you can test scanning with hidden UI, saving the scanned image, using ADF, ...
If there is any problem, do not hesitate to inquire about it at the technical support, email: [email protected] . I am the member of the staff :)
Erika Kupkova

Hyperlinks on pictures don't work

I wanted to put some hyperlinks on pictures that would lead to other pages on my site. When I tried clicking the Insert menu and choosing Hyperlink, the choices were greyed out. Then I tried selecting the picture, and I opened the Inspector and checked "Enable as a hyperlink." Clicking on the picture to get to the page works in iWeb, but not when you load the page to the site.
Is it possible to make pictures hyperlinks, or should I just put captions under the pictures and make them hyperlinks?

Your second method is the correct method. Use the page name as the link destination instead of First, Second, etc. Then check "Make hyperlinks active" checkbox and try the link. It should take you to the linked page right in iWeb.
To check the links without publishing to the server just publish to a folder on the Desktop and run the site locally with your browser.
OT

Unrecognized pictures solution-it works

Similar Messages

Maybe you are looking for