Unrecognized USB device on A30-151 in XP

After a clean install of WinXP Pro on a Satellite A30-151, a USB Device remains in the "Other" category (after installing audio, modem and graphics drivers) for which no drivers appear to be available on the drivers CD. At that point the "USB" category contains four entries, two standard "Universal Host Controllers" and two "OpenHost" controllers, all with default drivers.
I suspect the missing device may be a USB 2.0 "PCI to USB Enhanced Host Controller" from a further manufacturer, but Toshiba does not offer a driver for XP for this so it should be supported by the OS (?!).
Any suggestions as to what the device may be, and what drivers it requires?

Turns out XP only supports USB 2.0 as per SP1, so it seems a pre-SP1 version of XP Pro results in the native Windows drivers being unavailable. For anyone in a similar position, it looks as though either a) upgrading to SP1 or b) installing the hotfix Q312370 (
http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe
for the English version should throw up plenty of download locations) followed by autodetection of native Windows drivers should do the trick. However, the following SP1 issue may come into play
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000001c0d
in this case, the required original "NEC PCI to USB Enhanced Host Controller B1" driver can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 on the Toshiba driver download page.

Similar Messages

  • Unrecognized usb device

    Since loading iTunes 10.6.1 my Windows system is unable to load the USB device driver for iPhone or iPads. Anyone else with the problem or even better a solution?

    Did you already try to remove iTunes and all Apple related software and install iTunes again after that?
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • New ipod nano "unrecognized USB device"

    I have tried the 5 Rs and various USB ports; I have also tried the fix of deselecting the "allow the computer to turn off this device to save power" in the USB root hub entries in the device manager. Still, the PC says USB device not recognized, has malfunctioned every time. CAn anyone help? I have successfully operated other ipod nanos on other computers, and other devices work on these same USB ports. I

    Hi there,
    I have the same problem with connecting my nano to the computer. every time i connect it, it tells me that the device has malfunctioned and is not recognised.
    I tried reinstalling the ipod software which didn't succeed becuase it didnt' recognise that it was plugged in. As well as this i tried to put into disc mode, where it still didn't recognise.
    Finally i tried the disk management and it didn't pick it up.... HELP!!!
    Nano   Windows XP  

  • 6500 Slide unrecognized USB device

    Hi all,
    I've been handed my sisters 6500 slide( 555552 RM-240 ) to fix because it wont transfer pics.
    Essentially when it's plugged in it prompts for usb mode just fine but shows as an unrecognized device (on three different computers, two windows and linux vis lsusb showing unknown device) 
    I've tried restoring factory settings which has done absolutely nothing, warranty has expired so taking it to a NCP isn't really an option, does anybody have any ideas?
    Cheers
    Message Edited by Lebowski124 on 27-Oct-2009 04:46 PM

    Cheers for the replies but I think my post may have been misunderstood.
    I've tried both data storage/mass storage mode and PC suite mode connected to three different computers (two of which have PC Suite installed and recognize my N97 fine.
    My problem is the phone is presenting itself as "unknown device" no matter which mode it's in or which computer it's connected to, so I know it's not a driver issue or an issue with the computers, I've also tried a different usb cable.
    I'll post the output of lsusb later when I get the phone back to illustrate what I mean
    Ta.
    Message Edited by Lebowski124 on 28-Oct-2009 08:44 AM
    Message Edited by Lebowski124 on 28-Oct-2009 08:46 AM

  • Nano unrecognized USB device

    Has anyone had a problem getting Windows MCE to recognize a Nano? I had a similar problem with a Netgear wireless USB adapter and their tech folks said it was a driver issue. Is that the same case here and if so, does Apple have a driver to solve this problem?
    Thanks for whatever help you can give!
    HP 7360   Windows XP Pro   300GB hd with 1 ext drv

    Turns out XP only supports USB 2.0 as per SP1, so it seems a pre-SP1 version of XP Pro results in the native Windows drivers being unavailable. For anyone in a similar position, it looks as though either a) upgrading to SP1 or b) installing the hotfix Q312370 (
    http://www.google.com/search?hl=en&q=Q312370_WXP_SP1_x86_ENU.exe
    for the English version should throw up plenty of download locations) followed by autodetection of native Windows drivers should do the trick. However, the following SP1 issue may come into play
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&FID=TRO0000001c0d
    in this case, the required original "NEC PCI to USB Enhanced Host Controller B1" driver can be found by searching for "USB driver" for "Windows 2000" for the Satellite A30 on the Toshiba driver download page.

  • Freezing iPod combined with unrecognized USB device combo... Worst yet?

    Hey Everyone,
    I'm using a 5G 30Gb iPod, or at least I was... It was working fine for a couple of ways, untill yesterday I did the following 3 things:
    -Updated Adobe with that photo stuff
    -Used an usb Memory stick
    -Charged it with a Logic3 AC adapter
    I have no if these are the trouble makers, but the usb stick is my main suspect. Since I did these things, my iPod shows the following behaviour:
    -When connected to computer, shows the "do not disconnect" for about 30sec.
    -After that, the computer starts seeing a "usb storage device".
    -At the same time the computers starts seeing the iPod, the iPod freezes.
    Due to this crashing, I can't format it or change the drive letter indication. I've tried everything I could think off, including:
    -5R's
    -Uninstalling iTunes + iPod software completely
    -Installing from the disk, or the latest updates
    -Tried to install those usbstor.sys/inf, but it says "best drivers already installed".
    -Rebooting over a 100 times (at least that's how it feels now).
    Well I guess that was about all, but I've tried it numerous times..
    Any help would be greatly appreciated!
    Thanks,
    Ingmar
    XP windows PC   Windows XP Pro   Definitely up to iPod requirements

    Wow, I've just had a nightmare experience with Apple and their so called "genius" bar at their store. After at least 10 combined hours of trial and error, on the phone with Apple Care & time spent at the genius bar, turns out (and this is just what I am presuming based on the evidence) that this 5th Gen IPOD won't necessarily work with your existing 2.0 USB port. The USB port has to be "WHQL" certified. My IOGear USB card isn't WHQL certified. I found this out by going to IOGear's website and reading the FAQs about my card. I suggest you do the same ... like go to the USB card's manufacturer's site and read about it. I'm sure there will be something about errors with IPODs ... it might tell you that this card is not compatible (as it did with me). So .. I have two choices now :
    1) Use my IPOD with the slow 1.1 USB link (not going to be happy with that )
    2) Buy a new "compatible" card. (also not the happiest about it)
    Below are two cards Apple Care says will work for sure:
    1) OrangeMicro Model # 70USB90011
    2) Belkin Model # F5U219
    Last but not least ...
    Why does Apple not know of this?!!! Why do I have to figure all of this out myself?

  • IPod nano no longer recognized USB device - after almost 2 perfect years

    Okay, so I ran about 5 miles last night using my nike+ipod. The ipod worked flawlessly as usual. When I went to plug it in to my computer, instead of acting normal I got "unrecognized USB device" or something similar. iTunes didn't recognize it either. It was charging however. The ipod still plays music, but without being recognized I won't be able to get any music changed on it.
    I already tried a couple of things. I rebooted the computer. I plugged it in to another computer (with same results). I switched the hold switch and then held down the top two buttons for 6 seconds, etc. It turns off and back on fine. It plays music fine. The computer seems to know it's there b/c it charges and respondes "USB device not recognized". It just doesn't recognize it anymore.
    Please help! Did I sweat too much on it?
    iPod nano 1Gb (1st Gen I think)   Windows Vista  

    I got my ipod in May for my birthday and its worked pretty fine up until now. I went on holiday for two weeks to France where I went running everyday with my ipod and it worked fine but on the journey home in the car it wouldnt work and froze. Now it wont charge and is unrecognised on my pc and says that there are no drivers installed for this Device when it before worked fine. I have tried everything that has been mentioned on every discussion I could find and it still isn't working. It's driving me crazy! Could any1 help please? All suggestions appreciated.
    Out of curiousity could it be a faulty wire?

  • IPod Nano Restore, USB Device Not Recognized. Windows XP. What to do?

    Hi,
    I tried to reset my iPod Nano but it did not work. It has a blank screen with the backlight on, and the music is playing. Someone suggested that I do a restore.
    However, when I connect my iPod to my PC, it says it is an Unrecognized USB device. I have Windows XP Pro, the restore application says it cannot initialize iPod.
    What am I to do?

    Someone here said that you need two drivers usbstor.sys and usbstor.inf I found them at driverguide.com. I have not tried to load them yet but I will probply tommorrow.My coumputer will not see ipod as a hard drive, it loads video fine and all my music but no pics.

  • Satellite A30: Doesn't recognise any USB devices.

    My computer doesn't recognise any of the devices when connected to the USB Port on my Satellite A30. After dowloading SP2 I was able to install the printer but I can't use it because there is no printer icon on the tool bar. If i want to print anything i get the printer window, i select the print then it goes to MS Office Image writer. Basically, I can't use my printer or any other device connected to a USB port.
    However, It was working perfectly well when I had the XP home edition but I can't reinstall that one because there is something wrong with the recovery disk that's why I had to install the XP Pro.
    Also, I used to get a sound, letting me know that a device has been connected. I don't get that anymore nor the icon on the toolbar.
    Is there anything I could do to resolve this issue please? Is it possible to obtain another recovery disc somehow? Obviously this is something to do with XP Pro software but I don't know what to do.
    Could you please help me?
    Thank you!

    Hello Juan!
    This is what the problem is the only printer window i have is the MS Office Image Writer. I do not have any other printer window. If I use add a printer, then the wizzard can't detect a USB device.
    I have just checked the link you gave me and did exactly what it said but it just doesn't help. It is not just my printer, it doesn't detect any device i connect to it. For example, I can't update my ipod anymore because the computer doesn't detect the ipod when it is connected.
    I really don't know what the problem is! It was working perfectly fine before the upgrade and for the upgrade i have used the official MS Windows XP disk.
    You woudn't know how to format the HDD by any chance, would you?
    Thank you for your help

  • Can a USB device be owned even when logged out?

    We are trying to deploy THUM (temperature and humidity USB measurement) devices from Practical Design Group --- simple USB-attached devices to track ambient temperature in our application --- on a variety of Mac hardware all running OS X 10.5.2. We've found, not too surprisingly in retrospect, that when a user logs out, or even is sent into stasis by fast user switching to another user, that user, even as a cron job, can no longer access the USB device --- the USB ports, after all, have to be available to whoever may then be the "console" user. We're trying to run a cron job (that is, one run every n minutes) that will run the vendor's OS X executable to sample the temperature and append the result to a file, to build up a temperature record.
    Is there any way around this? We would like to be able to grab the particular USB device and assign it to the original user through any login or logout or fast user switch as long as the machine stays up.
    We know that there's a default setting to automount volumes on boot without user, and are wondering if there's anything similar for USB devices.
    I've had a look around the Apple USB Device Interface Guide, but it doesn't appear to discuss this issue.
    Thanks in advance for any clues.

    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • Can this USB device be recognised on start up.

    Hi All
    Am using USB Wireless Lan device.
    The device is working well except for the annoying problem that it is not recognised when the device is in the usb port during stat up. Therefore, it has to be pulled out and reinserted every time I start up, for the internet to work.
    Does anyone know of any solutions to this problem?
    Much appreciated.
    Cheers
    Tec info:
    Computer : Emac
    OS: 10.3.9
    USB Device: Asus wl 167g – v2 usb wireless lan adapter

    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • [Usb] Weird dmesg output and some usb devices work randomly [solved]

    I tried multiples times my devices, new cables, all items works well alone, never add this trouble before ...
    [ 1.920414] usb 1-1.4: new high speed USB device using ehci_hcd and address 4
    [ 2.032096] usb 1-1.4: configuration #1 chosen from 1 choice
    [ 2.032527] hub 1-1.4:1.0: USB hub found
    [ 2.032905] hub 1-1.4:1.0: 4 ports detected
    [ 2.130125] ata2: SATA link down (SStatus 0 SControl 300)
    [ 2.265398] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 2.269525] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.273636] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.277906] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.283054] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.283064] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 2.287140] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 2.291265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.502404] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 2.670413] EXT4-fs (sda6): mounted filesystem with ordered data mode
    [ 2.705384] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 2.709519] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.713646] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.717752] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.721891] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.721901] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 2.726035] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 2.754275] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 2.758389] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.762532] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.766642] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.770766] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.770776] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 2.774902] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 2.779016] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.783154] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.787272] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.791388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.795502] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.795508] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 2.815380] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 2.819502] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 2.823639] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.031147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 3.325397] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 3.329500] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.333629] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.337764] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.341894] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.341902] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 3.346006] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 3.350128] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.354265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.358395] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.362504] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 3.572405] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 3.834148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 4.041147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 4.225161] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 4.604135] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 4.811158] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 5.124148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 5.128260] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.341030] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 5.524159] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 5.528261] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.532402] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.536510] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.540635] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.540641] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 5.544776] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 5.548923] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.553034] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.557136] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.762414] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 5.944142] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 5.948279] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.952386] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.956511] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.960635] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 5.960641] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 5.964779] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 5.968888] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.181040] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 6.394141] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 6.398258] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.402387] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.406514] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.410636] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.410642] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 6.434138] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 6.438262] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.442386] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.446507] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.450637] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.450643] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 6.454765] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 6.458886] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.671163] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 6.854135] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 6.858258] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.862388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.866513] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.870653] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.870663] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 6.874764] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 6.878889] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.883014] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 6.887139] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 7.101019] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 7.284137] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 7.288259] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 7.292389] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 7.296513] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 7.501164] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 7.684161] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 7.688266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 7.692390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 7.696514] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 7.901042] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 8.084157] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 8.088266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.092384] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.096527] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.100639] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.100645] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.104776] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.124156] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 8.128265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.132389] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.136515] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.140640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.140646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.144766] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.148891] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.153016] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.157139] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.161263] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.165390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.165396] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.169511] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.173640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.177765] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.181891] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.186041] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.190139] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.190145] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.190528] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 8.444154] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 8.448266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.452388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.456516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.460640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.460646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.464765] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.484142] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 8.488266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.492405] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.496516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.500641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.500646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.504781] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.524141] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 8.528265] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.532388] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.536515] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.540641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.540647] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.544778] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.564142] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 8.568266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.572385] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.576517] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.580641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.580646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.584762] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.584772] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 8.764160] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 8.768266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.772392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.776516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.780640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.780646] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.784766] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.788888] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.793017] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.797141] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.801266] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.805392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.805397] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 8.809528] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 8.813644] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 8.817767] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.031041] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 9.211034] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 9.464146] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 9.468267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.472390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.476528] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.480642] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.480648] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 9.484767] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 9.488893] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.493016] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.497142] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 9.711044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 9.891164] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 10.231292] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 10.493788] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 10.740912] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 11.004160] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 11.008270] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 11.012394] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 11.016519] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 11.020644] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 11.020650] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 11.024784] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 11.028894] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 11.231046] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 11.411038] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 11.770918] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 12.025397] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 12.029516] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.033645] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.037771] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.041897] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.041903] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 12.046021] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 12.050147] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.054271] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.058397] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.062536] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.066647] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.066653] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 12.070785] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 12.074897] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.079021] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.083142] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.087271] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.091390] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.091396] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 12.114146] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 12.118284] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.122396] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.126521] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.130647] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.130653] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 12.134772] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 12.134783] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 12.138908] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 12.143017] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 12.534153] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 12.538267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.542392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.546522] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.550647] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.550653] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 12.554786] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 12.558897] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.563046] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 12.771044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 13.054145] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 13.058272] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 13.062397] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 13.066522] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 13.271044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 13.484653] Adding 2000888k swap on /dev/sda1. Priority:-1 extents:1 across:2000888k
    [ 13.547246] udev: starting version 151
    [ 13.565404] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 13.569523] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 13.573656] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 13.648934] lp: driver loaded but no devices found
    [ 13.791014] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 14.081019] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 14.324129] agpgart-intel 0000:00:00.0: Intel IGD Chipset
    [ 14.324473] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
    [ 14.335417] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 14.339843] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 14.339861] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 14.339885] atl1c 0000:01:00.0: setting latency timer to 64
    [ 14.343912] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 14.392534] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 14.452279] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
    [ 14.552406] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 14.633372] [drm] Initialized drm 1.1.0 20060810
    [ 14.711101] Linux video capture interface: v2.00
    [ 14.754166] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 14.756184] type=1505 audit(1322362365.376:2): operation="profile_load" pid=547 name="/sbin/dhclient3"
    [ 14.756987] type=1505 audit(1322362365.376:3): operation="profile_load" pid=547 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [ 14.757478] type=1505 audit(1322362365.376:4): operation="profile_load" pid=547 name="/usr/lib/connman/scripts/dhclient-script"
    [ 14.761330] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 14.763344] cfg80211: Calling CRDA to update world regulatory domain
    [ 14.765513] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 14.769663] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 14.784905] acer-wmi: Acer Laptop ACPI-WMI Extras
    [ 14.793038] cfg80211: World regulatory domain updated:
    [ 14.793048] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 14.793059] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 14.793068] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 14.793077] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 14.793085] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 14.793094] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 14.795609] type=1505 audit(1322362365.416:5): operation="profile_load" pid=560 name="/usr/sbin/ntpd"
    [ 14.882025] uvcvideo: Found UVC 1.00 device WebCam (0402:7675)
    [ 14.887671] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input6
    [ 14.888353] usbcore: registered new interface driver uvcvideo
    [ 14.889105] USB Video Class driver (v0.1.0)
    [ 14.940790] acer-wmi: Unable to detect available WMID devices
    [ 14.990212] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 15.054215] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 15.054230] i915 0000:00:02.0: setting latency timer to 64
    [ 15.092402] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 15.092425] ath9k 0000:02:00.0: setting latency timer to 64
    [ 15.101858] alloc irq_desc for 27 on node -1
    [ 15.101868] alloc kstat_irqs on node -1
    [ 15.101887] i915 0000:00:02.0: irq 27 for MSI/MSI-X
    [ 15.101905] [drm] set up 7M of stolen space
    [ 15.142616] ath: EEPROM regdomain: 0x65
    [ 15.142624] ath: EEPROM indicates we should expect a direct regpair map
    [ 15.142634] ath: Country alpha2 being used: 00
    [ 15.142640] ath: Regpair used: 0x65
    [ 15.208295] [drm] initialized overlay support
    [ 15.233223] phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 15.234991] Registered led device: ath9k-phy0::radio
    [ 15.235042] Registered led device: ath9k-phy0::assoc
    [ 15.235103] Registered led device: ath9k-phy0::tx
    [ 15.235151] Registered led device: ath9k-phy0::rx
    [ 15.235182] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc90010ba0000, irq=17
    [ 15.246026] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 15.250140] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.254267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.258379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.262608] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.262696] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 15.266767] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 15.270901] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.275040] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.284136] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.360881] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 15.557431] EXT4-fs (sda7): mounted filesystem with ordered data mode
    [ 15.572272] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 15.661452] fb0: inteldrmfb frame buffer device
    [ 15.661460] registered panic notifier
    [ 15.763678] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 15.790306] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
    [ 15.857619] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
    [ 15.861307] acpi device:24: registered as cooling_device3
    [ 15.862608] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
    [ 15.862804] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
    [ 15.862873] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 15.863199] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 15.863264] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 15.869348] vga16fb: initializing
    [ 15.869358] vga16fb: mapped to 0xffff8800000a0000
    [ 15.869370] vga16fb: not registering due to another framebuffer present
    [ 15.991336] [drm] Big FIFO is enabled
    [ 15.991362] [drm] Big FIFO is enabled
    [ 15.997989] Console: switching to colour frame buffer device 128x37
    [ 16.027811] hda_codec: ALC272: BIOS auto-probing.
    [ 16.029372] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 16.200901] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 16.384155] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 16.388287] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.392400] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.396536] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.400653] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.400787] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 16.405041] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 16.409289] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.413406] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.417535] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.421664] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.425780] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.426408] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 16.444174] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 16.449027] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.453907] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.458795] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.671050] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 16.895409] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 16.900421] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.905530] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 16.910540] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 17.121051] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 17.305540] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 17.309552] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 17.313643] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 17.318033] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 17.531030] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 17.537507] type=1505 audit(1322362368.154:6): operation="profile_load" pid=768 name="/usr/share/gdm/guest-session/Xsession"
    [ 17.556042] type=1505 audit(1322362368.174:7): operation="profile_replace" pid=769 name="/sbin/dhclient3"
    [ 17.556829] type=1505 audit(1322362368.174:8): operation="profile_replace" pid=769 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
    [ 17.557298] type=1505 audit(1322362368.174:9): operation="profile_replace" pid=769 name="/usr/lib/connman/scripts/dhclient-script"
    [ 17.590216] type=1505 audit(1322362368.214:10): operation="profile_load" pid=774 name="/usr/lib/cups/backend/cups-pdf"
    [ 17.591206] type=1505 audit(1322362368.214:11): operation="profile_load" pid=774 name="/usr/sbin/cupsd"
    [ 17.717821] alloc irq_desc for 28 on node -1
    [ 17.717832] alloc kstat_irqs on node -1
    [ 17.717869] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
    [ 17.718163] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 17.719432] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 17.791653] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 17.932273] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 18.254175] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 18.258278] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 18.262411] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 18.273277] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    [ 18.474912] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 18.551727] vboxdrv: Trying to deactivate the NMI watchdog permanently...
    [ 18.551739] vboxdrv: Successfully done.
    [ 18.551745] vboxdrv: Found 2 processor cores.
    [ 18.552078] VBoxDrv: dbg - g_abExecMemory=ffffffffa0334a20
    [ 18.552126] vboxdrv: fAsync=0 offMin=0x15e offMax=0x9e2
    [ 18.553753] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 18.553763] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
    [ 18.685461] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 18.853354] ppdev: user-space parallel port driver
    [ 18.891055] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 19.195420] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 19.199562] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.203665] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.207800] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.211931] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.211943] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 19.216037] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 19.220168] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.224300] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.228412] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.232535] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.415152] CPU0 attaching NULL sched-domain.
    [ 19.415171] CPU1 attaching NULL sched-domain.
    [ 19.442301] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 19.470525] CPU0 attaching sched-domain:
    [ 19.470540] domain 0: span 0-1 level SIBLING
    [ 19.470553] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 19.470619] domain 1: span 0-1 level MC
    [ 19.470632] groups: 0-1 (cpu_power = 1178)
    [ 19.470656] CPU1 attaching sched-domain:
    [ 19.470668] domain 0: span 0-1 level SIBLING
    [ 19.470679] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 19.470699] domain 1: span 0-1 level MC
    [ 19.470708] groups: 0-1 (cpu_power = 1178)
    [ 19.624177] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 19.628289] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 19.832297] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 20.014177] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 20.018295] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.022419] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.026534] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.030667] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.030679] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 20.034788] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 20.038909] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.043038] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.047158] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.051314] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.055411] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.055422] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 20.059533] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 20.063670] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.067784] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.071914] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.282421] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 20.473171] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 20.740898] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 20.985407] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 20.989518] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.993650] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 20.997778] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.001910] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.001925] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 21.006017] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 21.010153] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.014282] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.018392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.022521] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.026651] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.026665] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 21.054148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 21.058276] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.062407] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.066534] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.070667] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.070681] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 21.074780] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 21.095406] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 21.099529] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.103656] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.107777] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.322153] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 21.504148] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 21.508287] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.711020] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 21.896037] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 21.900695] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.904767] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.908896] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.913021] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.913033] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 21.917139] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 21.921349] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.925406] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.929563] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.933645] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.939095] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.939108] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 21.964186] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 21.968298] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.972413] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.976565] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.980640] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 21.980652] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 21.984770] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 21.988920] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 22.202393] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 22.382762] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 22.774151] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 22.778267] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 22.991156] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 23.172147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 23.399069] CPU0 attaching NULL sched-domain.
    [ 23.399084] CPU1 attaching NULL sched-domain.
    [ 23.450299] CPU0 attaching sched-domain:
    [ 23.450310] domain 0: span 0-1 level SIBLING
    [ 23.450319] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
    [ 23.450386] domain 1: span 0-1 level MC
    [ 23.450395] groups: 0-1 (cpu_power = 1178)
    [ 23.450412] CPU1 attaching sched-domain:
    [ 23.450420] domain 0: span 0-1 level SIBLING
    [ 23.450427] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
    [ 23.450445] domain 1: span 0-1 level MC
    [ 23.450452] groups: 0-1 (cpu_power = 1178)
    [ 23.554128] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 23.558830] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 23.562880] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 23.567006] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 23.781149] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 23.964268] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 23.968382] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 23.972515] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 23.976641] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 23.980766] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 23.980778] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 23.984896] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 24.004297] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 24.008422] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.012529] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.016644] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.222380] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 24.405642] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 24.409756] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.413896] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.418003] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.422137] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.422154] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 24.427164] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 24.431327] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.435379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.439514] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.443762] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.651151] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 24.834138] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 24.838258] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 24.842392] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.051144] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 25.234134] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 25.238248] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.242385] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.246507] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.250630] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.250641] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 25.254752] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 25.258879] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.471299] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 25.651010] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 25.854132] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 25.858251] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.862384] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.866500] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.870625] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.870636] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 25.874748] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 25.894130] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 25.898252] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 25.902379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 26.111134] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 26.364124] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 26.571128] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 26.774122] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 26.778246] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 26.782376] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 26.786497] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 26.790621] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 26.790632] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 26.794742] hub 1-1.4:1.0: cannot disable port 4 (err = -71)
    [ 26.814125] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 27.021129] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 27.204247] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 27.208367] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 27.422506] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 27.642224] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 27.894242] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 27.898361] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 28.101247] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 28.284231] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 28.288352] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 28.292491] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 28.296611] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 28.502497] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 28.681247] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 28.922372] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 29.171120] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 29.432353] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 29.691106] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 29.941230] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 30.202348] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 30.450975] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 30.714724] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 30.974221] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 31.181103] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 31.360970] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 31.732478] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 31.992647] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 32.250964] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 32.501211] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 32.760963] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 33.011084] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 33.271208] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 33.532460] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 33.783079] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 34.042829] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 34.291076] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 34.550949] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 34.811073] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 35.062196] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 35.321069] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 35.574188] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 35.578304] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 35.781196] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 35.965440] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 36.171196] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 36.350937] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 36.601060] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 36.854182] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 37.061188] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 37.244177] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 37.451185] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 37.630930] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 37.881053] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 38.131052] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 38.392298] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 38.651427] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 38.902424] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 39.161052] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 39.415422] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 39.419528] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 39.622417] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 39.802407] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 40.181163] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 40.444773] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 40.692279] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 40.955411] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 40.959540] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 40.963653] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 41.172279] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 41.352269] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 41.725408] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 41.729531] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 41.941022] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 42.122136] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 42.502127] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 42.743002] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 43.002261] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 43.252253] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 43.521765] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 43.772418] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 44.030863] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 44.282506] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 44.582250] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 44.792248] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 45.053275] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 45.305374] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 45.512683] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 45.692626] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 46.072229] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 46.334003] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 46.584095] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 46.842495] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 47.092239] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 47.352219] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 47.611113] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 47.884591] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 48.121232] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 48.370978] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 48.642356] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 48.891730] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 49.141104] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 49.401106] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 49.654104] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 49.911350] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 50.171347] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 50.424218] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 50.685470] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 50.690037] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 50.902345] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 51.083968] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 51.451345] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 51.704344] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 51.912337] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 52.091342] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 52.476082] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 52.736313] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 52.941208] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 53.122330] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 53.495445] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 53.499572] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 53.711202] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 53.893448] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 54.262319] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 54.522318] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 54.772186] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 55.035438] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 55.039547] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 55.043688] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 55.047810] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 55.051938] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 55.051950] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 55.075436] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 55.079558] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 55.291067] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 55.544188] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 55.548296] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 55.752311] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 55.935432] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 55.939542] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 56.151185] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 56.332431] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 56.574180] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 56.782431] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 56.961301] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 57.331174] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 57.594172] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 57.598292] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 57.602433] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 57.812293] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 57.991171] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 58.362542] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 58.611167] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 58.871162] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 59.131161] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 59.381033] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 59.641159] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 59.891156] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 60.156036] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 60.160168] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 60.371156] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 60.551027] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 60.922399] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 61.171147] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 61.431145] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 61.694130] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 61.901148] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 62.081015] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 62.451137] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 62.711252] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 62.964252] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 62.968371] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 62.972506] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 62.976621] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 62.980744] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 62.980754] hub 1-1.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
    [ 63.004128] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 63.211895] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 63.392882] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 63.735373] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 63.941133] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 64.121126] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 64.504126] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 64.762367] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 65.011121] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 65.270994] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 65.531117] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 65.782235] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 66.040989] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 66.294233] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 66.298349] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 66.501242] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 66.680985] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 67.061107] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 67.320980] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 67.571604] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 67.835476] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 68.042480] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 68.224228] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 68.602474] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 68.851096] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 69.112723] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 69.374212] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 69.581221] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 69.761087] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 70.131212] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 70.391084] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 70.651343] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 70.900957] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 71.161079] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 71.410954] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 71.674215] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 71.931075] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 72.180947] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 72.442322] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 72.691071] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 72.954578] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 73.214219] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 73.421065] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 73.605435] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 73.609585] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 73.613693] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 73.617800] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 73.832437] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 74.011386] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 74.231060] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 74.492307] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 74.743553] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 75.002573] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 75.252300] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 75.511051] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 75.772294] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 76.021047] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 76.280921] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 76.530919] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 76.793795] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 77.053670] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 77.301163] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 77.561289] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 77.811287] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 78.071158] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 78.335403] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 78.541162] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 78.724655] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 79.091777] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 79.351288] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 79.612267] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 79.862528] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 80.124145] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 80.371306] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 80.631019] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 80.891285] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 81.141138] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 81.401287] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 81.651640] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 81.914257] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 81.918370] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 81.922510] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 82.131293] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 82.314252] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 82.521134] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 82.701127] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 82.931002] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 83.191124] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 83.454502] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 83.701121] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 83.964239] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 84.171248] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 84.351116] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 84.731114] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 84.981112] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 85.244232] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 85.451115] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 85.630983] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 86.010980] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 86.262357] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 86.524603] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 86.771095] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 87.034222] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 87.241227] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 87.422350] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 87.801225] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 88.061098] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 88.312346] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 88.573346] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 88.821341] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 89.080963] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 89.331211] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 89.590957] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 89.851075] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 90.103083] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 90.364198] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 90.571082] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 90.755448] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 90.961203] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 91.143823] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 91.384192] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 91.591199] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 91.775434] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 91.981197] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 92.166067] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 92.414191] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 92.621210] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 92.801323] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 93.172438] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 93.431189] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 93.692309] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 93.943552] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 94.200927] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 94.450923] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 94.710922] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 94.972293] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 95.221044] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 95.481678] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 95.733789] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 95.991667] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 96.251305] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 96.504167] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 96.508276] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 96.721039] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 96.901296] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 97.271159] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 97.534149] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 97.741284] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 97.924032] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 98.294277] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 98.298384] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 98.511329] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 98.691150] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 99.061304] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 99.321397] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 99.572256] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 99.832267] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 100.091134] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 100.341139] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 100.601391] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 100.854010] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 101.111747] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 101.365381] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 101.369511] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 101.582382] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 101.762383] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 102.131255] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 102.394258] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 102.398379] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 102.402498] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 102.612376] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 102.792726] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 103.161133] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 103.411301] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 103.685109] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 103.922485] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 104.191109] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 104.445830] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 104.692230] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 104.951106] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 105.204217] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 105.208351] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 105.421080] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 105.602349] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 105.972486] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 106.235499] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 106.239611] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 106.243736] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 106.452335] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 106.635459] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 106.639593] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 106.643720] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 106.861082] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 107.045500] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 107.252602] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 107.435490] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 107.439594] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 107.658475] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 107.844976] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 108.022596] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 108.282345] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 108.545484] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 108.549584] hub 1-1.4:1.0: cannot reset port 4 (err = -71)
    [ 108.762596] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 108.945458] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 109.151201] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 109.333948] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 109.562581] hub 1-1.4:1.0: unable to enumerate USB device on port 4
    [ 109.815469] hub 1-1.4:1.0: hub_port_status failed (err = -71)
    [ 110.022326] hub 1-1.4:1.

    Anyone?

  • Usb devices not working after 2.6.38 kernel upgrade

    Hello everyone,
    today I've upgraded my aur system to the latest packages version , kernel 2.6.38-2  .
    After the reboot the usb keyboard doesn't work at all , as the usb mouse, leaving me struck at the login screen .
    If I try to modify kernel boot parameters in grub or in a live distro  (sysrescd) the keyboard works flawlessy .
    Any clue ?
    thanks in advance

    I just updated to 2.6.38.7-1. The USB devices that I have plugged in before booting work (e.g USB headset). If I try to insert a new USB device, it isn't recognized. Flash-disks and USB mice that worked under the last kernel aren't working at all.
    Is there a command that lets you "turn on" a USB device, or force the kernel to recognize it? I tried messing around in /sys/bus, but even in the root shell, I got "invalid write" errors.
    Interesting snippet from dmesg;
    [   19.399041] uhci_hcd 0000:00:1a.0: PCI INT A disabled
    [   19.399447] uhci_hcd 0000:00:1a.1: PCI INT B disabled
    [   19.412940] uhci_hcd 0000:00:1d.1: PCI INT B disabled
    [   19.413381] uhci_hcd 0000:00:1d.2: PCI INT C disabled
    [  151.340126] uhci_hcd 0000:00:1d.0: PCI INT A disabled
    Here's where it finds my webcam;
    [    9.626704] usb 2-5: new high speed USB device using ehci_hcd and address 3
    [   10.381678] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input15
    [   10.381759] usbcore: registered new interface driver uvcvideo
    .. and where it finds the mouse I had plugged in (you can see me disconnect it at entry 148);
    [   10.490045] usb 5-1: new low speed USB device using uhci_hcd and address 2
    [   11.201856] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input16
    [   11.202001] generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-1/input0
    [   11.202017] usbcore: registered new interface driver usbhid
    [   11.202019] usbhid: USB HID core driver
    [  148.846756] usb 5-1: USB disconnect, address 2
    When I try to reconnect the mouse, nothing happens. You can see that the kernel has this error repeatedly;
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    Edit: Found a temporary fix*.
    # cd /sys/bus/usb/devices/
    # for device in usb*; do echo "on" > $device/power/control; done
    * I'm not responsible for what happens to your devices when you run this, but it worked for me. Check out: http://www.mjmwired.net/kernel/Document … gement.txt
    Last edited by vkumar (2011-05-28 04:28:05)

  • USB Device Not Recognized - Palm 700p Verizon

    Hi,
    Yesterday morning I could sync, yesterday afternoon I got the error message "USB Device Not Recognized.  One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."  Sometimes when I click on the associated error pop-up message, it shows the location of my "unrecognized device" but sometimes nothing shows up.
    I've seen a couple of posts on the web generally about this, but not about the 700p.  I've tried rebooting the computer, tried syncing to a different computer, tried rebooting the phone, and blown out the contacts.  I don't want to buy a new USB cable if I can help it because I'm thinking about getting a Pre anyways (although the fact that I can't seem to use Palm's chat function through either Internet Explorer or Firefox is starting to dissuade me). 
    Anyways, is there anything else I can try to resolve the issue with my 700p or should I just give up?
    Thanks,
    Margaret

    if you already tried your phone and USB cable to a different USB port and computer then the problem could be in either the phone or the cable. if you don't want to buy a new cable because of your plan. maybe you can visit a store near you where you can borrow a cable or PC. at least you trying to make sure which is defective. in cases like this, the cause is the USB cable.

  • IPad mini USB device not recognized

    Trying to get my laptop pc with Windows 7 to recognize my iPad mini on iTunes v11.  Actually, trying to get it recognized by my pc at all.  It shows up as an Unkown Device when i plug it in, as well as in my Device Manager.  I've gone through Apple's online Troubleshooting guide (http://support.apple.com/kb/TS1538), but when I click Hardware IDs in the Devices tab as requested, it shows up as Unrecognized (USB/UNKNOWN) still -- the Troubleshooting guide does not adress this scenario.  I've been connecting it to several funcitoning USB ports (that recognize my iPhone 4S just fine) via the "lighting" cable that came with the iPad mini, with the same result.
    This is a very simple Windows 7 laptop so it strikes me as very odd that this wouldn't work simply.  I've checked around the net and seen people with similar dilemmas without any known solution yet, as far as I can tell.  Please advise, Thanks.

    I tried the method mentioned and it didn't resolve my problem.
    After much frustration, I opened Device Manager on my PC with my iPad Mini conected in one USB Port, I located it as Another Device (Not Recognized) / iPad. Double Clicked iPad and manually Reinstall the Driver.
    It wasn't recognized as Apple Mobile Device in Universal Serial Bus Controllers before.

Maybe you are looking for

  • Passing User-Password - while invoking web service

    Hello Gurus, I am calling a web-service in that[i] Authentication is required..... If i am invoking through browser ,,,, I can pass User name and password.... But i am calling from Plain Java class.... How should i pass authentication parameter

  • Remove KF value '*' from report

    Hi, In report * is coming in KF. I need to restrict those records which has KF value as '*' . Anybody suggest how to remove this. Points assured.... Thanks, Debasish

  • Not able to connect to database using Oracle ODBC Driver

    Hi, I have installed Oracle client on a system. there are 2 homes installed. When I check the ODBC administrator, I see that only one ODBC driver is present. There are Net 8 services configured in both the homes. When I try to connect to a database w

  • Mashed/compressed command line output

    This is rather hard to describe, but after installing Arch on a new machine not long ago, I noticed that in the output of certain programs, some characters were partially or entirely hidden behind others.  That is, it appears that certain letters are

  • Block with multiple records

    hi every one i've developed a form containing a multiple record block. i need that some functions to be done before i commit it. 1. its primary key should b auto generated, usually i handle it by selecting max value(primary key field) from data base