Unrecoverable Error when iTunes tries to update contacts from Outlook

Has anyone else encountered this problem? In the past I have always updated my 60Gig iPod with my contact info from Outlook. I have never had a problem until today. Now when I update my iPod, all the music updates appear to download correctly, but when the process gets to the part when outlook contacts are updated, I get an unrecovereable error and iTunes shuts down. I have resolved the issue by turning off the update from Outlook. Just to make this a little more interesting, the error only appears to occur when outlook is already open. When iTunes has to open Outlook as part of the update process the error does not occur.
I have already deleted and re-installed both iTunes and quicktime from the apple website but this didn't fix the problem. Furthermore, my iPod is at the most recent firmware level. Not sure what else to do here...
I would like to report the problem to Apple, but I can't find a link to report bugs? Any suggestions?
Thanks
Grant
Dell   Windows XP Pro  

I don't know where the report bug button is, but if you find it you should only use it if you are sure the problem is with iTunes and not Outlook. If Apple can't fix it, then they can't.
A possible fix (if you are willing to always eject) is to enable disk use and then manually move the vCards into the contacts folder.

Similar Messages

  • There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

    There was as error when i tried to update my itunes. I am trying to reinstall but now i get an error message saying to verify if I am able to have apple mobile service. How do i do that?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I'm trying to import contacts from Outlook to mac address book. I've exported as a CSV but when i try to open with the Address book import tool, the file is greyed out and can't be imported

    I'm trying to import contacts from Outlook to Mac address book. I've exported as a CSV but when I try to open with the Address book import tool, the file is greyed out and can't be imported. Any ideas? 
    Thanks,
    Ian

    If you can't get the exported .csv file to work you might consider using Migration Assistant: http://support.apple.com/kb/HT2518, particular if you need to move more than just your contacts.  There is some granularity in the options on what to transfer but I'm not sure if you can choose to just your migrate contacts.

  • I got errors when I tried to upgratde WLS from 10.3.0.0 to 10.3.3.0

    Hi there,
    In our system we use spring on WLS. Everything is well till I try to upgrade WLS from 10.0 to 10.3. I set listener in my web.xml file.
    <listener>
    <listener-class>weblogic.spring.monitoring.WeblogicContextLoaderListener</listener-class>
    </listener>
    I got below errors when I tried to start our system:
    Jul 26, 2010 9:54:14 AM org.springframework.web.context.ContextLoader initWebApplicationContext
    SEVERE: Context initialization failed
    java.lang.NoSuchMethodError: weblogic.spring.monitoring.SpringBeanDefinitionRuntimeMBeanImpl.<init>(Ljava/lang/String;Lweblogic/management/runtime/RuntimeMBean;Ljava/lang/String
    ng/String;Ljava/lang/String;)V
    at weblogic.spring.monitoring.SpringRuntimeMBeanCreator.createSpringRuntimeMBeans(SpringRuntimeMBeanCreator.java:77)
    at weblogic.spring.monitoring.SpringRuntimeMBeanCreator.createSpringRuntimeMBeans(SpringRuntimeMBeanCreator.java:47)
    at weblogic.spring.monitoring.WeblogicSpringApplicationListener.onApplicationEvent(WeblogicSpringApplicationListener.java:80)
    at org.springframework.context.event.SimpleApplicationEventMulticaster$1.run(SimpleApplicationEventMulticaster.java:78)
    at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
    at org.springframework.context.event.SimpleApplicationEventMulticaster.multicastEvent(SimpleApplicationEventMulticaster.java:76)
    at org.springframework.context.support.AbstractApplicationContext.publishEvent(AbstractApplicationContext.java:274)
    at org.springframework.context.support.AbstractApplicationContext.finishRefresh(AbstractApplicationContext.java:736)
    at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:383)
    at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
    at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
    at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
    at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(Dep
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Any thoughts are very welcome!
    Thanks,
    Bo
    Edited by: user5771153 on 10-Sep-2010 8:57 AM

    I had a problem upgrading from 10.3.0 to 10.3.3 as well.
    I used Smart Update on a Linux (X86) machine.
    - I had previously used Smart Update to apply Critical Patches to the WLS 10.3.0 environment, all using the default profile.
    - I upgraded the environment to Maintenance Pack 3 using Smart Update.
    After the upgrade Smart Update indicates that there are no patches applied. However, when I start a WLS server previously created in 10.3.0, it lists the patches previously applied and then fails with a message:
    <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'bea_wls_internal'.
    I opened a service request and received a 'workaround' which is to manually remove the patches applied for 10.3.0. After I did this things worked correctly, at least for the trivial testing that I've performed so far.
    Perhaps you should open an SR, report the problem and maybe get a better workaround?
    - Paul

  • A gear error when i tried to update to 9 itunes

    i have vista.. when i tried to uprade to 9itunes it completely destroyed my itunes.. when i tried to reinstall it it gave me an error saying """""""unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the ear driver set is scheduled to be deleted during the next system reboot. Please Reboot the system and run iTunes again.""""""" i tried all that and i have no freaking clue what this means... all i have is installtion. i dont even have anything from itunes on my computer

    Excellent news.
    Mercifully, this particular error is rarer than it used to be a few years ago. I'm hoping that that means the more recent versions of the GEAR drivers are less prone to this sort of thing, and so fingers crossed this one shouldn't crop up for you again.

  • Error when itunes tries to connect to ipod

    I am having trouble with Windows giving an error "Problem with I Pod Service Module" . And it closes . Ipod will not connect to Itunes. Ipod showes up in My computor, and will charge. Using Itunes 8

    I didn't say all Nanos wouldn't work on the earlier system. What I was implying was YOUR Nano, which came out AFTER iTunes 7 was releases, has updated firmware that requires iTunes7.
    I had the same issue with my two video iPods. My 30GB was purchased back in the iTunes 6 days and worked fine on my computer. A year+ later my wife upgraded me to an 80GB (so she could also take possession of the 30GB) which came out after iTunes7. So when I plugged that one in, it refused to work with iTunes 6 and required iTunes 7.
    This is something Apple does with a lot of their hardware. For example, most Mac computers are ROM locked to only be able to run the Operating system they shipped with or higher. So you can not take my OS 10.3 eMac and try to load 10.2 onto it. It won't go. Same with the iPods. If the iPod came out when iTunes 6 was the release, they will work fine with iTunes 6 or iTunes 7, but if they came out after the release of iTunes 7, they tend to be locked to iTunes 7 or higher. This is why you often see the simultaneous release of a new version of iTunes when there is a major update or new release of an iPod model.
    Patrick

  • I get an error when Imessage trying to update IOS on C2940

    When I try to update the IOS from 12.1(13)AY to 12.1(22)EA4 using CNA I get an error message like this: ERROR: Image requires 0x02000000 bytes of DRAM;only 0x01000000 bytes are present
    I what the error message says but how do I solve the problem with the DRAM

    No I have not checked the IOS version requirement but I have a similar c2940 where the upgrade was no problem.
    Here is the sh ver output:
    Cisco Internetwork Operating System Software
    IOS (tm) C2940 Software (C2940-I6Q4L2-M), Version 12.1(13)AY, RELEASE SOFTWARE (fc3)
    Copyright (c) 1986-2003 by cisco Systems, Inc.
    Compiled Thu 26-Jun-03 18:33 by antonino
    Image text-base: 0x80010000, data-base: 0x805BA000
    ROM: Bootstrap program is C2940 boot loader
    31-kjeller-adm uptime is 8 weeks, 6 days, 1 hour, 40 minutes
    System returned to ROM by power-on
    System image file is "flash:/c2940-i6q4l2-mz.121-13.AY/c2940-i6q4l2-mz.121-13.AY.bin"
    cisco WS-C2940-8TF-S (RC32300) processor (revision B0) with 20778K bytes of memory.
    Processor board ID FHK0806Y07R
    Last reset from system-reset
    Running Standard Image
    9 FastEthernet/IEEE 802.3 interface(s)
    1 Gigabit Ethernet/IEEE 802.3 interface(s)
    The password-recovery mechanism is enabled.
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:0F:24:50:CE:40
    Motherboard assembly number: 73-8783-05
    Power supply part number: 341-0085-01
    Motherboard serial number: FOC08051PPK
    Power supply serial number: HIC0802020C
    Model revision number: B0
    Motherboard revision number: A0
    Model number: WS-C2940-8TF-S
    System serial number: FHK0806Y07R
    Configuration register is 0xF
    Ole Martin

  • Problems with contacts in Microsoft Outlook 2010, when sending emails to a contact from Outlooks adressbook

    Hi!
    I can´t send any email directly from Contacts in My Microsoft Outlook 2010 Swedish 32 bit version (Computer has Windows 7 professional 64 bit Swedish system).
    When I type the email address directly in the field all functions well.
    When I take the mailaddress from Contact its looks like:
    Firstname surename ([email protected])
    I Think it has the wrong format
    Earlier the adress from Contacts was
    Firstname Surename <[email protected]>
    How can I make the Contacts addressbok back to the earlier format?
    I hope someone has an answer to my problem!
    Greetings
    Sixten

    Hi,
    Any symptoms when you can't send emails from Contacts? Any error message?
    Based on my research, Firstname Surname <[email protected]> is specific to the contacts in Global Address List (GAL), while for other contacts in Outlook Address Book, it displays as Firstname surname ([email protected]).
    If a contact is stored in both GAL and Outlook Address Book, it follows the rule in GAL which means it displays as Firstname Surname <[email protected]>.
    You may learn other information about Display the Contacts from this article below:
    http://office.microsoft.com/en-001/outlook-help/display-the-contacts-list-in-last-name-first-name-format-HA010355556.aspx#_Toc260146235
    Feel free to post back if you have further questions and kindly answer my questions above.
    Regards,
    Melon Chen
    TechNet Community Support

  • After upgrade to lastest version af iTunes (10.3.1, I believe), I get this error, when iTunes runs the update of my iTunes library

    I get this error message from Windows: Instruction af 0x76f8de2d referred memey at 0x000000ca. Memory could not be written.
    The iTunes stops working.
    I am running Windows Vista with lastest updates from Microsoft. My iTunes folder is located on a QNAP nas drive.  I have around 58500 podcast, about 15 CDs, some iPhone apps in my iTunes folder.
    What do I do?

    That's most likely a problem with a library file or a content file, Per.
    I'd perhaps try a library recreation first. There's advice for both types of issues in the User-specific troubleshooting section of the following document:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • Error when user tries to seek feedback from participants of a 360 appraisal

    Hi
    When user is clicking on the Request Feedback button, the following error is generated:
    oracle.apps.fnd.framework.OAException: java.sql.SQLException: ORA-20002: 3133: Activity instance 'HR_PARTICIPANTS_BLOCK' is not a notified activity for item 'HRSSA/213075'.
    ORA-06512: at "APPS.WF_ENGINE", line 5666
    ORA-06512: at line 1
    The intention is to invite a participant to review the employee. Any one who has encountered this issue or has a hit to it, please help.
    Thanks
    Upma

    Hi,
    If anyone has any idea about this issue, please help.
    Thanks
    UJ

  • When I tried to update Itunes I got an error message telling me to reinstall.  When I try to reinstall I get a message "Apple Mobile Devide failed to start.  Verify you have sufficient privliges to start syem services"  Can anyone help here?

    When I tried to update Itunes I got an error message telling me to reinstall.  When I try to reinstall I get a message "Apple Mobile Devide failed to start.  Verify you have sufficient privliges to start syem services"  I'm not sure what this means, can anyone help here?  Thanks,

    I tried the temp fix you mentioned, it didn't work.  I could not delete all of the old itunes files, the uninstallers would crash half way through and if I tried to manually delete anything it also gave me an error, so reinstalling the older version would not work. 
    Frankly, this whole thing has got me ****** off.  judging by the amount of complaints here, there must be a lot of people having this problem, yet Apple has let it go on for almost 2 weeks.  What kind of inept coders are they employing if they can let an update that completely frags their software get through QA.
    Does anyone know of any programs that will play itunes music files?  I am just about done dealing with iTunes, but I've got a ton of music that I don't want to have to purchase all over again.

  • When I tried to update ITunes I get an error message that MSVCR80.dll is missing from my computer. How can I fix this?

    When I tried to update Itunes I get an error message that MSVCR80.dll is not available? How can I fix this? I am unable to update my iphone and Ipod. I can not open Itunes.

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98954)

  • Iphone 4S error 3194 when im trying to update to 6.1

    iphone 4S error 3194 when im trying to update to 6.1 in itunes why cant i update it? It says in tunes that the update is available

    IGadget Connect to iTunes;
    Turn off your iGadget (holding the power / sleep on top of the device until it shut down);
    Hold the power button / sleep and home simultaneously, after exactly 10 seconds holding both buttons (time), release only the power button / sleep, and
    Hold down the home button until iTunes displays a message saying that a device was connected in recovery mode.
    While your iGadget is in recovery mode the screen is completely black, which does not mean that the phone is switched off or stopped. Carefully follow the instructions in iTunes.

  • I downloaded Yosemite last night but when I tried to update iPhoto, I got an error message stating that that app and several others couldn't be updated because they weren't paid for by the user id entered. I'm the only one who uses this computer.

    I downloaded Yosemite last night and tried to look at my photos in iPhoto and noticed that needed updating. When I tried to update as requested, I got an error message stating that the app (and several others including Pages and Numbers) couldn't be updated because they weren't purchased by the user ID I had entered. I'm the only user of the computer and now I can't find my photos anywhere! Any help would be appreciated.
    Thanks

    Some folks have solved this issue by dragging the apps to an external disk, then disconnecting it, and then are able to download. Apparently it can arise if you upgraded from an OS the than Mavericks.
    Failing that: Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

  • HT201210 I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable

    I got this error prompt while trying to update my ipad 2: Ipad software update server could not be contacted or is temporarily unavailable

    Try posting to the correct forum.
    This is the iPhone for the Enterprise forum... there is nothing about the issue that appears to apply to using an iPhone in an Enterprise (corporate) environment.
    Try posting to the iTunes for the Mac forum.

Maybe you are looking for