Unrendered Audio - sequence and clip settings are the same

When I drag a clip to the timeline a redline appears on the top of the timeline. I know this means that there is a setting issue between the sequence and the clips. All the settings are the same with the exception of the:
audio format - Clip: 8 bit integer
Seq: 32 Bit Floating
Audio Rate - Clip: 48000 5kh
Seq: 48.0 KH
The clips which is 1 1/2 HR takes 6 minutes to render.
Does anyone know why I need to render this clip?
Macbook Pro Mac OS X (10.4.8)

Here: a foolproof way to ensure clip-sequence settings match up:
http://web.mac.com/steelepro/iWeb/steelecuts.com/fcs%20detective/6FD1D5FD-0C56-4 F06-992C-902D00556549.html
And if you still have the problem, why not convert it to AIFF via QT?

Similar Messages

My battery runs low very fast (three hours). I looked in the usage settings and it seems the time for usage and stand-by are the same, allthough i did have my iphone on stand-by!! What can i do?

Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
Merijn

Restoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh.

TS4079 Siri is not responding. All settings are the same as my wifes I4s. Her Siri works and my I5 does not.

Siri is not responding. All settings are the same as my wifes I4s. Her Siri works and my I5 does not. Any suggestions?

I just cycled my phone completely off (30 sec) then back on again. It seamed to help, it's working now!!!

TS3276 I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.

I am no longer receiving my mail. All my settings are the same and I can send mail. The connection doctor says I am connected, but I am no longer receiving anything. If you can help, I would appreciate it. Keep it simple, please.

Mac Mini: Smart mailbox items disappear after a month in one mailbox but stay for years in others. All settings are the same!

I have several Smart mailboxes set up on my Mac.
Some of them hold all mail for years and others delete after about a month.
All settings are the same on all mailboxes.

BDAqua Hi,
I have only 1 E-mail account, It is a POP and the one earlier account that I set up that works fine and saves all E-mails comes form a friend who also runs Apple. Don't know if that has anything to do with it.
All others are running Bill Gates stuff.
Even when I delete the "Friend Apple" E-mails his messages stay in the smart mailbox.
I deleted the other E-mails as I usually claen out once a week and get rid of junk and adds. I deleted the other smart mailbox E-mails from my main mailbox figuring that they would stay in the smart box like the other one.
Still perplexed,
Thanks for the help so far,
Ron

Problem with out going mail. I can send from my iPad but not my MacBook Air yet settings are the same.

Problem with out going mail. I can send from my iPad but not my MacBook Air, yet settings are the same. Can anyone advise?

Hi sointoit,
If you are having issues sending mail from your MacBook Air, you may find the following article helpful:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Cheers,
- Brenden

Firefox will download (or send to Word) .docx files but not .doc files and the application settings are the same for both.

I have tried resetting the application settings for Word 1997-2003 -- browsing for my Word 2007 program, instructing Firefox to save the file, or to ask me what to do. In all cases, Firefox simply opens a new blank tab. I have also tried resetting the setting and closing then reopening Firefox.

Hello,
With firefox 4.0.1 I encountered this problem too. '.doc' files don't open the 'Ask Always' Popup asking either to open or save the fine.
This works fine for 'docx', 'ppt' or other file type.
I only encountered this problem since I upgraded to FF 4
My application setting for both Word extension type are the same.
Any solution to this?
Bas.

*Fix* Usage and Standby Times are the same - iPhone 4S 7.0.4

I'd like to share my experience here because I actually found the solution on here but I'm actually having trouble finding it again.
I had three problems:
1. My standby and usage times were always reporting the same values, thus draining my battery faster than usual. This is not normal behavior; whenever the screen is off it should report standby times, and after the phone is unlocked it is considered usage. They should never be recording in tangent.
2. Whenever I would try to turn off my phone by holding down the power button, the phone would basically restart itself, showing the Apple logo boot screen and then restarting. The only caveat was that it would turn off if it was plugged in and being charged. But take it off the charger and try to replicate it turning off and it would restart.
3. The sound would sometimes think that it was connected to a Dock, so when I went to the Airplay options, they were listed as Dock Connector, Airport Express and Apple TV. There would be no volume slider in the Control Center, and when pressing the volume buttons, there would be no dots, just the bell with a line through it.
Many people might be having genuine battery issues, where you have an older phone and your battery is just really bad and needs to be replaced. My 4S was still under AppleCare in December 2013 and the battery was pretty bad, so I had it replaced in an Apple Store. So for me, the battery life itself was not the problem.
I tried a lot of things to try and fix the above problem but none of them helped. This includes chatting with Apple support (I was surprised they didn't steer me in an obvious direction, considering the large amount of folks who were having these kinds of problems, but they played dumb), restoring fresh and restoring icloud and itunes backups, all kinds of combinations of settings for Mail, iCloud, etc., but nothing worked. I probably restored my phone at least ten times in my troubleshooting efforts. The isolated test of restoring my phone fresh, setting it up to the start screen, making sure the battery was charged 100% and taking it off the charger waiting about 10 minutes. Then I would check standby and usage times.
I had read about fixes for the phone not being able to turn completely off, and it had something to do with cleaning the charging port. I attempted to clean the port with compressed air and other methods, but it never fixed this problem. Then I read a post on Apple Support about a guy who had the exact same problems as I did, then said he changed out his charging port and this fixed it. Well, it was $40 so I paid someone to do it in 45 minutes.
After I got my phone back the problem didn't appeared to be fixed, but after a restore and even with an icloud backup restored with it, I looked down at my phone and presto chango, the times where separate and working as they should. Last night with wifi off while I was sleeping, the battery only went down 3%. I know this is turning out to be a narrative, but I spent a lot of time trying to figure out what the problem was and it was a frustrating process. I'm happy it's resolved.
Apple Support thought it was a corrupt install package from iTunes, or some kind of software glitch or maybe some part of iCloud constantly trying to call home, but it was a combination of both hardware and software. Because of the bad charging port, for some reason the phone thought it was still being used and thus was still treating standby as usage.
I would encourage those that are having this problem to do a test and see if your phone will turn off when you want it to. If it resets automatically and if your standby usage times are the same, replacing the charging port might fix it.

Ever since iOS7.0.6. and still on iOS7.1 both me and my wife had huge battery drain on our iPhone 4S and stand-by was equal to usage time. We finally found the solution to a post of another user on the Dutch Tweakers forum. There seem to be a bug within a certain Dutch coupon app called 'Scoupy' which drained the battery completely although GPS setting was turned of and also 'refresh on background' was off.
Scoupy said that a fix for their app is send for approval to the App Store. We removed the app and our usage/stand-by time is again as normal (higher stand-by time then usage time) and best of all a 'normal' battery use as it was the case on iOS7.0.4. I hope this could help someone. I'm wondering if the iBeacon changes in iOS7.0.6/7.1 together with a bug in the Scoupy app could be the cause? Maybe this is also with our similar apps you have on your phone.

Cannot set up iPad since my email and apple id are the same. Help?

I cannot set up my new iPad since the apple ID and the email are the same, any suggestions?

Anything here to help? http://support.apple.com/kb/HE37

Is Snapshot and Materialised view are the same?

Can you please help me on this...
I am using oracle 10G enterprise edition...
Thanks in advance..

Re: Is Snapshot and Materialised view are the sameYes

Could nt complete your request because source and destination files are the same

Hi, thank you for reading.
I'm having this problem and it's driving me nuts.
I'm actually following a tutorial that you can check out here: http://nightshifted.tumblr.com/post/2559360661/tutorial-paused-animations
basically I'm trying to do a animated gif with canvas (I'm sorry if my english is not so great). when I try to drag the layers into the canvas (step 2 of the tutorial), I get the error: "could not complete your request because source and destination are the same".
can anybody help me? I have both CS3 and CS5 and they the error appears in both.
thank you in advanced

I think they mean select the layers and frames and using the move tool, drag
inside the document (click inside the document window and drag) to move the
selected layers to the top half (transparent area), not to drag the layers from
the layers palette into the document, which would give that error.
MTSTUNER

HT1430 I just upgraded to an i5 and I'm unable to send emails. It says my username and or password is incorrect, however all of my settings are the same as they were on my previous phone. Any ideas?

I just upgraded to an i5 and am unable to send emails. I can receive them however every time I try to send an email I get an error message saying my username and or password is incorrect. My settings are exactly the same as they were on my old phone... Any ideas?

Contact your email provider and verify you have the correct settings

Time and clip duration not the same ???

I got a clip with 3 correction layer above of same lenght and I toggle from one another and they shows 9;09 in info all excepts video clip which shows 9;10, but on timeline they are same lenght and show in info same In and Out TC. Also, when I go in Time by right-clicking clip, Time indicates 9;09.
As my AE smoke dope or is this known bug?
Which do I trust in ?
The Cs4 on the machine in updated to last patch and has Cineform ProspectHD on it.

There's no bug here. If you go to the end of the clip in AE you'll be at the last frame. Go 1 more frame and you'll be at the end of the clip. This is where the confusion comes. If you were butting together to clips in AE then the first frame of the second clip would start when the preceding clip ends, IOW at the end of the clip.
Dropping a clip in an empty timeline or dragging it into the new composition icon creates a composition exactly the same length as the clip, but the frame number of the last frame is one less than the length of the comp.
Maybe the confusion arises because you're not counting bananas, you are measuring time. 60 bananas are 60 bananas because you started with a banana, but 60 seconds is a minute because you started with no seconds. The last second in a minute is the 59th second. When that second is over the minute is up.
In Premiere, or any other NLE, when you go to the end of a clip you don't see that clips last frame, you go to the first frame of the next clip. This makes sense because you wouldn't want to overlap the clips by 1 frame. When you go to the end of a comp you see the last frame, but the frame number is one less than the length of the composition. This also makes sense because you wouldn't want to the render to have one blank frame at the end of the movie.
I hope this clears things up.

Best practice when FACT and DIMENSION table are the same

Hi,
In my physical model I have some tables that are both fact and dimension table, i.e. in the BMM they are of course separated into Fact and Dim source (2 different units) and it works fine. But I can see that there will be trouble when having more fact tables and I e.g. have a Period dimension pointing to all the different fact tables (different sources).
Seems like the best solution to this is to have an alias of the fact/transaction table and have 2 "copies" of the transaction table (one for fact and one for dimension table) in the physical layer. Only bad thing is that there will then allways be 2 lookups in the same table when fetching data from the dimension and the fact table.
This is not built on a datawarehouse - so the architecture is thereby more complex. Hope this was understandable (trying to make a short story of it).
Any best practice on this? Or other suggestions.

Id recommend creation of a view in the database. if its an oracle DB, materialised views would be a huge performance benefit. you just need to make sure that the MVs are updated when the source is updated.
-Domnic

VBA Merge PDFs - Error when first and second PDF are the same

Using http://khkonsulting.com/2009/03/adobe-acrobat-and-vba-an-introduction/ as a guide, I am able to successfully merge multiple pdf's together into one document using VBA (Access mdb), except when the PDF being merged to has the same name as the next PDF.
Here's my scenario. An Access table is updated with a list of reports that need to be printed. All of these reports are PDF's. I loop thru this table and merge the PDF's according to an identifier, then print the group. There are times
when there are multiple copies of the same report for an identifier. If the PDF being merged to has the same name of the PDF being merged, an error occurs. How can I handle this situation?
Sample data: This identifier (ESO and Pulling) needs to merge these PDF's (Aaa.PDF) together which happen to have the same name. Aaa.PDF is trying to merge Aaa.PDF and this throws an error.
Aaa.PDF ESO Pulling
Aaa.PDF ESO Pulling
This identifier merges fine despite having the same PDF twice. But the first PDF is not named the same. Xxx.PDF is the first PDF and merges the next two into it. The last two
are named the same.
Xxx.PDF 916 Pulling
Bbb.PDF 916 Pulling
Bbb.PDF 916 Pulling
Code:
pdfDoc1.Open (filesToMerge(1))
numPages = pdfDoc1.GetNumPages()
Set pdfDoc2 = CreateObject("AcroExch.PDDoc")
Dim i As Integer
For i = 2 To intNbr - 1
pdfDoc2.Open (filesToMerge(i))
If pdfDoc1.InsertPages(numPages - 1, pdfDoc2, 0, pdfDoc2.GetNumPages(), True) = False Then
MsgBox "Cannot insert pages"
End If
pdfDoc2.Close
Next i
If pdfDoc1.Save(PDSaveFull, "C:\....\ReportPacket__" & Trim(CStr(intReportCount)) & "__" & ... & ".pdf") = False Then
MsgBox "Cannot save the modified document"
End If
pdfDoc1.Close
The pdfDoc1.InsertPages command fails, displays "Cannot insert pages", then displays "Method 'Close' of object 'CAccroPDDoc' failed.
Thanks for any help or advice.

Hi
As far as I know, Access didn't provide such method. But I think you are able to achieve this goal through some 3rd party PDF component
Hope this will help you.
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unrendered Audio - sequence and clip settings are the same

Similar Messages

Maybe you are looking for