Unrendered Video Missing on Export

Hi,
I have a pretty serious problem here.
If I export a project with unrendered(color corrected) clips in the timeline, they show up as black video on the exported file. This happens when I use the "Export Media" command. It works like it should if I use "Export Using Compressor Settings".
Does anyone else have this problem? It happened on both 10.0.1 and 10.0.2.
I have background render turned off.
AndersDM

Yes it does.
And if I stop the rendering of a clip halfway only the first half of the clip is in the exported file.
This is all very unintuitive and dangerous on tight deadlines since it all plays back just fine from the timeline.

Similar Messages

Problems with videos when I export

Hi,
I have some problems with my videos when I export them. I edit my video, but I have problems with audio in the exported video. Either the audio is missing completely or I hear the audio from another videoframe. I thought that the transitions are the problem, but they're not. Sometimes I have the problem also when I watch the video in iMovie. CAN SOMEONE HELP ME?

Welcome to Apple Discussions Alek,
Does this issue happen with more than one project in iMovie or is it just one?
If the audio is out of sync or missing and it is confined to only one project, the most I can suggest is that you restore from a backup copy as that suggests the project file is corrupted.
If the issue is happening in multiple projects do a test to make sure iMovie is working correctly:
Capture 5-10 minutes worth of iSight footage.
Edit the movie adding a few titles and transitions.
Export to quicktime.
Is the audio correct here?
If the audio is fine that means that iMovie is fine. Something is wrong with the projects or the original footage. You could try taking the Event you are working with, adding it to a new project, and then without editing it, export the entire project out as Quicktime. Then import the resulting file as a new event. The process of exporting (encoding) and then re-importing might clean up minor corruption within the file.
Hope that helps

Some Audio Missing from Exported Movie

I've exported a movie from iMovie to iTunes for sharing with AppleTV but the sound is missing from the last 75% of the movie when played back in Itunes or AppleTV. All the sound is ok in the iMovie project so some of it appears to have gone missing when exporting to iTunes.
I have tried re-exporting it but it's still the same result.
Any help would be appreciated.
Regards
Joe

Like everyone else here, I'm just an iMovie user who volunteers to help answer questions.
Unfortunately, recent changes to the Discussion software introduced bugs that make it very difficult to reply to user questions. Despite assurances by Forum administrators, these bugs are not being fixed.
This is to ask that you contact Apple, suggesting that additional resources be allocated to fixing the Discussion software. Hopefully your support will encourage Apple to address these problems.
Here's the man who should be able to get some action:
Steve Jobs <[email protected]>
I plan to include this message in postings until the issues are resolved.
Joe, I've also seen problems exporting iMovie projects with the Apple TV exporter, although never the problem you mentioned.
I suggest you try another way to configure your own export settings. Your goal will be to create an export very similar to Apple TV, but build it on your own. The Apple TV exporter uses the H.264 codec, used for many other exports too.
(You can test this on one or two clips in the affected area before exporting the entire iMovie project. Use the "Share selected clips only" checkbox.)
Instead of choosing the Apple TV export in the export dialog window, try choosing "Movie to MPEG-4". Then click on the Options button. Configure these settings:
UNDER THE VIDEO TAB:
Video Format: H.264
Data Rate: 2653
Optimized for: Download
Image Size: Custom, 720x480
Frame Rate: Current (or 29.97 for NTSC, 25 for PAL)
UNDER THE AUDIO TAB:
Audio Format: AACV-LC (Music)
Data Rate: 128 kbps
Channels: Stereo
Output Sample Rate: Recommended
Encoding Quality: Better
When the export is done, change the file extension to ".m4v", the extension used by Apple TV, if you like. You'll want to test the movie in whatever ways you now use the traditional Apple TV movie.
Karl

Aperture video missing red channel on playback

Aperture video missing red channel on playback. Also some pictures appear to have missing pixels.
Video played with Quicktime doesnt have the missing red channel.
When trying to playback video,in aperture, it plays with missing frames, missing pixels and the crashes entire computer. My computer is a Mac Pro desktop with 24 gb memory with 3.33 ghz 6-core processor running Version 10.9.2 and Aperture 3.5.1
Any suggestions on my problem?
thanks
Pat

Never had anything before crash the whole system since OS8 or so.
Back up your system, without deleting older backups - just in case; that looks like a possible system trouble.
Also they some have been in Aperture for a while and they used to be OK.
Do the videos play in QuickTime Player or any other software, if you export or reveal the originals?
Can you play your videos, when signed into another user account?

Render files missing after export using compressor

The deets:
Render file path is correct.
Render files live on an XSAN, shared by multiple users.
The FCP Sequence is fully rendered before output through compressor.
After compressor is done working, sequence becomes unrendered.
Any ideas?
Manually relinking is not a viable solution - we work with a buttload of media. Each program is 30 mins & takes enough time to render to make this a major issue.
Thanks in advance!
-Rich

I'm sure there's a reason for this to happen, which given the info provided I have not quite identified, however, to keep things going...
After full render of video and audio export as QT movie "reference" ( uncheck self-contained box before exporting) that will take a lot less to export and a LOT less space.

Making Multi clips form one video in one export in final cut pro.

I am looking to turn my video that is 45 mins in length in to 45 small 1 min clips. Can anyone tell me an easy way to export out the video in to 45 individual 1 min clips that will not need me to install more software or have to cut up the video and batch export 45 clips.
thank you

Have you tried to deinterlace the clip in Final Cut Pro X? Select the clip, go to Inspector > Info Tab > Settings View and check the de-interlace box.

What video format to export for Ipad Apps

Hi,
I am new in export flash to ipad. I tried to export my video as FLV for my ipad apps, it plays but its lagging or jerky.
I had tried other formats like mp4, f4v, m4v or mov it just doesn't play
Wonder if anyone knows what video format to export for my ipad apps?
Bruce
http://www.vmw.com.sg

[email protected], on an iPad, here's what I did to get the FLV loading and taking up (most) of the screen. You can't use the FLV Component skins so you have to use the UI Components as markc888 suggested below your comment. My only gripe with this solution is that I can't get the fullScreen button to make the video go full screen.
This is starts from a playVideo button on my stage.
playVideo.addEventListener(MouseEvent.CLICK, playVideoClick);
function playVideoClick(event:MouseEvent):void {
var flvPlayback:FLVPlayback = new FLVPlayback();
flvPlayback.x = 62;
flvPlayback.y = 62;
flvPlayback.width = 900;
flvPlayback.height = 506;
flvPlayback.fullScreenTakeOver = true;
flvPlayback.autoPlay = true;
flvPlayback.source = "yourMovie.flv";
flvPlayback.bufferTime = .1;
addChild(flvPlayback);
flvPlayback.playPauseButton = playPauseBtn_mc;
flvPlayback.stopButton = stopBtn_mc;
flvPlayback.seekBar = seekBar_mc;
var closeMovie:yourMovieClip = new yourMovieClip();
addChild(closeMovie);
closeMovie.x = 977;
closeMovie.y = 77;
closeMovie.addEventListener(MouseEvent.CLICK, closeMovieClick);
function closeMovie(event:MouseEvent):void {
flvPlayback.stop();
removeChild(flvPlayback);
removeChild(closePres);
Hope it helps...

Is it possible to make a video preview and export it from edge animate?

is it possible to make a video preview and export it from edge animate?

Hi Johan,
If you are looking to export video through Edge Animate.
Well, there is no direct way to do it but you could use a screen recorder to make an mp4. Then you can import the mp4 in PS and if you have the plugin for gif then you just save aa a gif.
Regards,
Devendra

I'm trying to Export my completed video; however, the Export option is grayed out in the File Menu.

I'm trying to Export my completed video; however, the Export option is grayed out in the File Menu. What am I not doing?

GregEW2
Thanks for the follow up.
From what you wrote, you have Premiere Elements 10. Is that on Windows 7 64 bit or other. For now I will assume Windows 7 64 bit. If version 10 is on Windows 7 or 8 64 bit it is a 64 bit application running in the 64 bit system which makes it possible for full use of the 64 bit resources. That is good news especially when you are trying to take a large project to completion.
You set up the project preset in the new project dialog to match the properties of your source media. That setting directs the program to establish the right space in the Edit Mode Monitor for editing purposes. That project preset also directs the program as to what disc menu set (s, w, or hd) will be available to you in the disc menu section. The project preset also has more subtle effects on the project settings.
What is you plan for exporting your Timeline, export to file saved to the computer hard drive or burn to disc DVD or Blu-ray? Keep in mind that the setting for the project preset do not prohibit variations in the export choice under most conditions. If you post a description of your source media and how you would like to export it, I will offer some very specific guidelines on that.
If you do go the purchased book route, please try for one which is specific to your version 10. There has been a marked change in interface starting with version 11. Often principles remain the same from version to version, but features do not. And, I always write "It is very frustrating to be armed with principles when you cannot find a feature."
I suggest that you start with the Premiere Elements 10 Help PDF and then decide what next.
http://help.adobe.com/en_US/PremiereElements/10.0/Using/index.html
Also check out
http://tv.adobe.com/show/learn-premiere-elements-10/
A lot of these links that say version 10, roll over to 11.
Steve Grisetti, the moderator of this forum, writes books on Premiere Elements if you are interested in the purchased book route.
Hope the information above is helpful. Above all do not hesitate to ask if you have questions on your Premiere Elements workflow or need clarification on anything written.
Thanks.
ATR
Add On...
I did not see SG's post before I submitted this reply to you.

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

Objects missing when exporting to PDF, but show up when printing to PDF

Hi - I'm working with someone, both of us in InDesign CS4, and she has some documents that cause a few random objects to just go missing when exported to PDF (same on my computer). But when printing to PDF, they show up fine. They also show up fine if we recreate each individual object, but that can end up being a lot of work. She prefers to export to PDF because of quality. I'm drawing a blank on this one!
The attached file shows the issue. The green blocks just don't want to show up when exporting.

Peter -
The links are just the PDFs of the black and white portions and don't really matter too much since they show up fine when exporting or printing to PDF. Our main concern is the green blocks, which are indeed the green areas of the plan you pointed out. They are actually separate objects created directly within InDesign that can be moved and adjusted.
I just updated to 6.0.4 and that didn't help. I wonder if this may be a variant of the bugs I was reading about with master pages and certain things not showing up when creating PDFs or printing (even though none of these things are on the master page)?
Thanks

I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

How do I stop video freezing during export?

Video freezes during export to DV camera from imovie HD. Tried updating OS to combined version for 10.3.9. Installed latest updater for imovie 5 with no difference. Can anyone suggest any other solutions?
Chris

Chris,
I found a solution to the freezing problem in one of the answers to another problem here on the discussion forum.
It solved my problem and it might be helpful to you.
Convert your iMovie video into a QT film with the same quality (I have a dutch version of iMovie HD, so I don't know the exact menu-wording. Something like >Slect>share).
Import this QT film into a NEW iMovie project.
Then export to your camcorder.
It took my Mac almost 11/2 hour to convert the video to QT (55minutes movie).
But in the end, it worked.
I'm no expert, but I think it has to do with the mutilations caused by adding titles, cutting, audio additions etc. which are imparted on the document.
The original video that frooze was 17.1 GB. The successful copy only 13.6GB.
Good luck
Ed van Kapel

Video glitch in Exported QT and Flash video pieces

Hello, I am having a strange problem with my playback of exported videos. Currently I am exporting out video for website use both Highband and Lowband. For my highband I export out video using quicktime conversion. In QT conversion I use Flix Flash FLV Export which I bought extra to be able to make flash videos. For my lowband videos I use QT conversion and H.264 format. The videos that I export have a weird glitch in both High and Low bandwidth attempts and at the same spots in the video. What happens is the video jumps backward a frame or two and the audio is all off from there on. Well any help with this would be much appreciated. Thank you.
G5 Mac OS X (10.4.6) FCP HD

The videos that I export have a weird glitch in both High and Low bandwidth attempts and at the same spots in the video. What happens is the video jumps backward a frame or two and the audio is all off from there on
Have you looked at those spots in the original project timeline to verify that there is nothing strange going on at the trouble spots? Is there anything "different" about either your audio or video files in those spots?
eg. are all the audio files in your project 48Khz?
If you export a simple QT movie with no compression or conversions do you get the same problem? If not, then try using that export as your "master" and convert/compress it to what you need.
rh

External Video Missing

After capturing 4 hrs of mini-DV via camcorder last week, I tried to capture 5th tape but now FCP can't recognize the camcorder deck I used before. Says external video missing.
it's the same camcorder, same firewire connect, same everything, as I had Friday. Any advice appreciated.
Jim

All bets are off if you used any software updates ....
If not:
- turn everything off.
- unplug the firewire connector
- zap the PRAM
- reboot without any firewire connections
- shut down again.
- hook up your tape deck and turn it on
- turn on you computer
- launch FCP
If you do not see the camera in FCP or system profiler, you have either a bad firewire port or a bad firewire cable. Swap cameras, cables and/or ports as necessary to isolate the offending party.
good luck.
x

Unrendered Video Missing on Export

Similar Messages

Maybe you are looking for