"Unrepairable" issue on start up with OS 10.7.5 Lion "Permissions"?

Hi. I have an early 2008 MacBook with 10.7.5 Lion OS. I installed Lion online.
I can't update to Maverick on this early version of MacBook to fix the following problem with the OS...
My chronic problem is with start up. I get white or black screen and start up stops there.
I have understood that the issue is with "Permissions, so I went into Disk Utility and First Aide and "repaired" Permissions, the first "Warning" I get is this:
"SUID file 'System/Library/CoreServices/Remote Management/ARDAgent.app/contents/MacOS/ARDAgent" has been modified and will not be repaired"
Will not be repaired?
Is there any way to repair this issue?
Thank You,
Shunyo Mahom

Thank you, Neil,
Your reply relieved a certain anxiety I'm having regarding the start up failures I'm expereincing.
I still just don't know what the cause is...
Shunyo

Similar Messages

TS1440 I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to.button to repair/verify is there but cant be

I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to. The buttons to repair and modify we're there but they were grey and couldn't be pressed.

Were you trying to repair the disk you were booted from? You can't do that - you need to boot from your install disk, and choose 'Disk Utility' from the 'install' menu.

TS1424 err = 3150 - this issue has started recently and continues to persist with all of my downloads - please help

err = 3150 - this issue has started recently and continues to persist with all of my downloads - please help

Is it error 3150 or -3150 ? If -3150 then have you tried the troubleshooting for that error number on this page : http://support.apple.com/kb/TS3297 ?
"Error -3150"
This alert is often related to a lost connection to the iTunes Store.
If you encounter this alert and you have verified you have a connection to the Internet using Wi-Fi, please review AirPort and Bluetooth: Potential sources of wireless interference.
If the issue persists, and you're using iTunes for Windows, you may need to flush your DNS and remove pop-up or ad-blockers.
Finally, this can occur due to timeouts caused by security software.

My audiobooks just recently starting playing with an echo - any suggestions to fix this issue?

My audiobooks recently started playing with an echo. Any suggestions on how to fix this issue?

I've got to agree with Allan. It sounds like the hard drive is corrupt at least. It's possible it might be physically failing. Without backups, it's possible your data is already gone. You need a professional to help you.
If you do not have an Apple Store near you or simply don't have the time to spare, there are some things you can try, but you must understand that it's possible these things could make the chances of recovering your data worse than they already are. Perform the instructions to follow at your own risk!
First, you can try repairing your hard drive with Disk Utility. If that works, see if you can start up the machine. If you can, the very first thing you need to do is back up any data you don't want to lose. You may still need to take other steps, as your system may be damaged as well, but getting the data is the important part.
If Disk Utility cannot repair the problems, you can try DiskWarrior. It can repair problems that Disk Utility cannot. However, it also increases the risk of destroying your data if it fails. If it works and you can start up the machine, do the same as I advised for following success with Disk Utility.
If repairs (with either) were successful, but the machine still won't start up, you can try reinstalling the system. Hold down command-R at startup and then just install right on top of the existing system. If all goes well, you'll be able to start up afterwards and can get your data backed up. If all goes badly, it'll further decrease the chances of getting your data back.
If neither can repair the damage, you're in bad shape. You will need a professional to help you, unless you are willing to lose all your data.

My address book and iPhone pics have become low resolution. Is there a way I can prevent this from happening when I start out with a higher resolution picture?

I guess I squeezed my entire issue into the subject line. lol When I sync my iphone to my laptop I notice that all my address book pics and iphone pics have become lower resolution, even though I started out with the resolution that I really needed to produce decenty address book printouts. I doubt I can correct the losses of resolution that have occurred but can anyone help me figure out how to prevent future losses? Thank you!

Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
'''''Address Bar Search'''''
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
(3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
Does that work?
'''''Search Box'''''
Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
Do either of those work?
There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing!

Why does my itunes crash after start up with an "APPCRASH" error every time i open it?! I have been trying to fix this for weeks but all i can do it re-install it every other day which does nothing! I am desperate to get access to my itunes to get music on my phone and all of this just makes me want me to sell my iphone since there is no other way to add music to my phone. If things go get sorted soon you can say goodbye to my support.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

How do I start iTunes with whichever iTunes library I want?

How do I start iTunes with whichever iTunes library I want?
I've created a 2nd iTunes library using the "press shift-key while opening iTunes from the start menu" method given in iTunes help. Now, when I try to start iTunes from the Quick Launch menu or from the system start menu, I get the new library--without choosing it.
Otherwise, the new library works as I'd hoped. By turning off "Copy files to iTunes Media folder when adding to library," I'm able to use "Add Folder to Library" (where the folders are in the 1st iTunes library) without using more disk space for the 2nd library. So far, it works just fine for CDs and movies. I'm anticipating an iPad which can hold much less than my iPod Classic.
I have the latest iTunes (10.2.1.1)

A solution found!
I found where Apple addresses the question. Actually, I had tried this before I found Apple's answer and before I asked the question here and I didn't get it to work. I finally have it working, but the Apple answer is missing a step--or so it seems.
Locating Apple's answer:
From the iTunes window,
Help > More resources > iTunes Support Website > iTunes Library and Backup > iTunes Library >
How to open an alternate iTunes Library file or create a new one.
Apple quote:
1.If iTunes is running, quit iTunes.
2.If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
3.If you are using the Mac, open iTunes and immediately hold down the Option key.
4.You should see one of the following screens:
End quote.
As it says, you get a prompt to: Quit or Choose Library or Create Library.
I created my new library by choosing "Create Library" and expected to be able to use "Choose Library" later. So, when I clicked "Choose Library," I got a new window that's titled "Open iTunes Library" (it looks a lot like a Windows Explorer window). I selected (on the sidebar) the old library, clicked "Open" and nothing happened. The problem is likely my inexperience with this type of issue, but, still, the solution seems hokey.
After too much screwing around and a 24oz beer, this is what's working:
1. If iTunes is running, quit iTunes.
2. Hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes. (You don't have to have the shift key down until just before you click the last "iTunes.") Don't release the shift key 'til the prompt comes up.
3. The prompt is: Quit or Choose Library or Create Library. Click "Choose Library."
4. When the "Open iTunes Library" window comes up, click the desired iTunes library on the sidebar. (Mine are named "iTunes" and "iTunesIPad.")
5. Then, you'll see a list of items in the right pane. Find the file named "iTunes Library.itl" and click it.
6. Now, with both the iTunes library name selected on the sidebar and the "iTunes Library.itl" file selected in the right pane, click the "Open" button.
7. iTunes will come up using the desired library.
8. Using iTunes from the Quick Launch menu or the desktop will bring up the same iTunes library again, even if you shut down your computer.
9. When you want to change the iTunes library in use, start at step 1.
Nice about this, is that I would only have to get into the "iTunesIPad" library if I need to add something to it from my regular "iTunes" library or I want to sync to the iPad. Most of the time, I'll use my regular 185GB "iTunes" library (even here, I deselect many movies so that I can sync the library to my iPod).
Caution:
I must add the warning that I'm doing this because the iPad (that I don't have yet), won't hold even half of what I have in my iTunes library. At this point, the "iTunesIPad" library will take up very minimal disk space since it's using pointers to the regular library rather than copies from the regular library AND it's easy to switch between libraries only when needed. I can't say that this will all work until I try more setup work and I actually use it with an iPad. If someone knows that this is going to cause problems or if they have a better idea, I'd sure welcome comment. BTW, before trying this, I restructured my iTunes library (File > Library > Organize Library > Reorganize files in the folder "iTunes Media.") to bring it up to date and then backed it up on an external drive. The website "iLounge" has an article about the old and new library structure.

Issue while starting AdminSerever using wlst commands

Hi, I am facing issue while trying to start the AdminServer and Managed Server via nodemanager using wlst commands. I have installelled WebLogic 11g on windows 2008 R2. Mentioned below are the steps that I followed:
1) In Nodemanager.properties files I set following parameters to true. I did this, so that nodemanager can start the server in case of crash.
CrashRecoveryEnabled=true
StartScriptEnabled=true
2) started nodemanager and then started AdminServer from the command prompt as follows:
nmConnect('weblogic','password','10.23.226.58','5556','IMDomain','E:\Oracle\Middleware\user_projects\domains\IMDomain','ssl')
nmStart('AdminServer')
I dont see any errors but it seems the AdminServer do Not start properly as in the cmd window I don't see any 'started successfully' message - the message remains as *"Starting AdminServer..."*
However in the adminServer logs I see that the status is Running (refer logs at the end) and I can also see it as Running in weblogic console.
I really didnt care if its not giving a success message in cmd window but the problem occurs when I start the managedServer. After starting the managed server in about 10 minutes, there is a stuck thread. (I guess it is 10 mins because Stuck Thread MaxTime value is 600).
If I set StartScriptEnabled=false, and start by directly running the startweblogic.cmd then it works fine.
I am struggling with this for last 1 week, appreciate any help.
LOGS.......
Starting WLS with line:
E:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.xml.stream.XMLInputFactory=weblogic.xml.stax.XMLStreamInputFactory -Dweblogic.security.SSL.nojce=true -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dwli.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\integration -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=E:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;E:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
<Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Mar 14, 2012 3:16:30 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.2-b06 from Sun Microsystems Inc.>
<Mar 14, 2012 3:16:31 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Mar 14, 2012 3:16:32 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Mar 14, 2012 3:16:32 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 14, 2012 3:16:32 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\IMDomain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Mar 14, 2012 3:16:36 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.227.211.13:8001 for protocols iiop, t3, ldap, snmp, http.>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "IMDomain" running in Production Mode>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\PROGRA~1\Java\JDK16~1.0_2\jre\lib\security\cacerts.>
<Mar 14, 2012 3:20:53 PM CDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
public exponent: 65537
Validity: [From: Thu Mar 21 14:12:27 CST 2002,
               To: Tue Mar 22 15:12:27 CDT 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Mar 15, 2012 11:41:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "650" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:136)
java.io.BufferedReader.readLine(BufferedReader.java:299)
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
<Mar 15, 2012 11:42:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "710" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
java.net.SocketInputStream.socketRead0(Native Method)
java.net.SocketInputStream.read(SocketInputStream.java:129)
weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
java.io.InputStream.read(InputStream.java:85)
com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
com.certicom.tls.record.ReadHandler.read(Unknown Source)
com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
java.io.InputStreamReader.read(InputStreamReader.java:167)
java.io.BufferedReader.fill(BufferedReader.java:136)
java.io.BufferedReader.readLine(BufferedReader.java:299)
java.io.BufferedReader.readLine(BufferedReader.java:362)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>

Hi chamila,
    I never tried the example. Exception is not clear. Could you please post more stack trace from log files.
Thanks,
Sham

[Suggestion/Issue] GPO "Start Menu Layout" / PS Export-StartLayout Issue

To start off with, I have already submitted this to Windows via the Windows Feedback option provided in the client version of Tech Preview. I have decided to post this on here anyways as this might yield a suggested fix from someone else in the Microsoft
Community. I also was unsure if this was a Windows 10 Tech Preview issue (Export-StartLayout is done on the client), or a Server Tech Preview issue as I'm using GPO's.
When using Export-StartLayout after adding "Network and Sharing Center" and "Devices and Printers" to the start menu, it exports these two tiles with different AppID #'s depending on which user account I'm exporting from. As a result
of this, when using the GPO "Start Menu Layout", users do not get the two tiles in question setup, and also locks down the Start Menu so they can't add it. The lockdown of the Start Menu is by design, however the loss of the tiles presents
an issue.
It would be helpfull if they were assigned set AppID's so they can be easily mapped to the Start Menu via the GPO.

Hi,
>> I also was unsure if this was a Windows 10 Tech Preview issue (Export-StartLayout is done on the client), or a Server Tech Preview issue as I'm using GPO's.
Based on my test, this is not a Windows 10 Tech Preview issue. This situation also happens to Windows 8.1. At this moment, I have to admit that there is no solution known to me for this situation, and thanks for sending a feedback about this
situation to Microsoft.
Best regards
Frank Shen

My G5 is starting up with an icon of a file folder with the smile face. Motor runs loudly and then nothing. What is going on?, my G5 is starting up with an icon of a file folder with the smile face. Motor runs loudly and then nothing. What is going on?

My G5 is starting up with an icon of a file folder with a blue smile face. The motor will run loudly for a few minutes and then nothing. I can not get it to run at all.
Any suggestions?

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If that doesn't work, Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

Issue printing combined document with comment summary.

I am having an issue generating the correct output for printing a comment summary with connector lines. I started off with three duplicate documents, all of which had been commented on by different individuals. The documents and comments were combined and I attempted to print the comment summary with connector lines. I noticed that at the bottom of the first page, where there should have been a comment, there was only the name of the person who had commented and then the standard line "Comments continued on next page" but the person's comment was not there on page 2. Its as if only their response is being cut off but you can still see their name, along with the date and time of the comment.
I sent the issue over to someone I know who has Adobe Acrobat Pro X and they did not have the same issue. I am not able to upgrade to V.X yet so if there's anyway to correct this or if I am doing something wrong, could someone please respond and let me know? I combine documents and print with comment summaries on a regular basis.
Thank you

Hi Alejandro,
thanks a lot for your reply, but I am afraid this does not have anything to do with that.
I have checked the option that you mention and it was checked. Besides, I am using now Web Intelligence Rich Client, so that option should not be a problem.
I don't really know what it is, it seems to be a bug or maybe the alert are not supposed to be printed.
I would appreciate any idea that could help.
Thanks a lot

UDI OSD Task Sequences started failing with 0x80070002 error in SCCM 2012

This is kind of long, but here goes...
We built a UDI task sequence in SCCM 2012 (with MDT integration) that we were testing for deployment of a couple of different Win7 images. We customized the UDI experience thru the UDI wizard and XML file and OS deployment worked as expected
thru the task sequence (testing on Hyper-V VMs). Recently, this UDI TS started failing with error 0x80070002 during what appears to be the "Use Toolkit Package" step. This is after the OS image has already been laid down and after the ConfigMgr
client has been installed/configured. The SMSTS.log reports "Failed to open the task sequence key HKLM\Software\Microsoft\SMS\Task Sequence. Error code 0x8007002" Among other errors...I will post the entire log below...
After the error during deployment, Win7 will boot normally, however, you have no network connectivity and it appears the proper network driver didn't get loaded in the OS. Combine this with the fact that the TS should have joined the machine to our domain,
but you can't login because no network.. Im not sure if the network issue is a product of the TS failing early or the actual cause of the TS failure.
Anyway, I attempted to build another UDI task sequence using the same boot image and toolkit/settings packages, but am experiencing the same error during deployment. We have a few OSD task sequences built without UDI and those all still work just fine.
So, I am at a loss for where the root problem lies. Any suggestions or assistance would be greatly appreciated.
Here is the entire SMSTS.log and BDD.log...
https://skydrive.live.com/redir?resid=D65B1C4362892A26!110&authkey=!AKu5mOvDsXaEgvc
Thanks
Richie Tenhet

your failure does appear to be network (driver or otherwise) or dns related and it cannot contact the management point FQDN just around the time where it should download and execute the
Use Toolkit Package step...
"Starting Task Sequence Engine . . . "
"Non fatal error 0x80072ee7 in sending task sequence execution status message to MP"
"Start executing an instruciton. Instruction name: Use Toolkit Package. Instruction pointer: 83"
"unknown host (gethostbyname failed)"
"sending with winhttp failed; 80072ee7"
"Tried all the available http based locations. SMB based locations will be attempted now."
"Failed to resolve the source for SMS PKGID=P0100015, hr=0x80070002"
"Failed to run the action: Use Toolkit Package.
The system cannot find the file specified. (Error: 80070002; Source: Windows)"
that said, check that the package referenced above actually exists and is the correct source version on your distribution points, also verify (press F8 and check can you ping the FQDN of your management point) that you have network connectivity
around the time of the failure.
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

WebLogic10.3) starting ManagedServer with nodemanager script

When I started ManagedServer with script (startManagedWebLogic.sh), it was OK.
the script was
./startManagedWebLogic.sh ManagedServer_1 http://xxx.xxx.xxx.xxx:7001
But, the problem is here
I used this script to start ManagedServer named as ManagedServer_1
-----------------------------------------------------script run-----------------------------------------------
/home/shon/app/weblogic/10.3/was_1/wlserver_10.3/common/bin/wlscontrol.sh -d shon_domain_1 -n /home/shon/app/weblogic/10.3/was_1/common/nodemanager -r /home/shon/app/weblogic/10.3/was_1/user_projects/domains/shon_domain_1 -c -f startManagedWebLogic.sh -s ManagedServer_1 START
and I get this error log..
---------------------------------------------------error log ------------------------------------------------
<Wed Mar 11 05:08:26 FKST 2009)> <Info> <NodeManager> <Rotated server output log to '/home/shon/app/weblogic/10.3/was_1/user_projects/domains/shon_domain_1/servers/ManagedServer_1/logs/ManagedServer_1.out00004'>
Server failed to start (see server output log for details)
/home/shon/app/weblogic/10.3/was_1/user_projects/domains/shon_domain_1/bin> vi '/home/shon/app/weblogic/10.3/was_1/user_projects/domains/shon_domain_1/servers/ManagedServer_1/logs/ManagedServer_1.out00004'
<Mar 11, 2009 5:05:06 AM FKST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Mar 11, 2009 5:05:06 AM FKST> <Notice> <Log Management> <BEA-170019> <The server log file /home/shon/app/weblogic/10.3/was_1/user_projects/domains/shon_domain_1/servers/ManagedServer_1/logs/ManagedServer_1.log is opened. All server side log events will be written to this file.>
<Mar 11, 2009 5:05:06 AM FKST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:175)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:990)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:704)
Truncated. see log file for complete stacktrace
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
What the hell is the problem? Anyone knows?
boot.properties was set correctly,

Looks like this is an issue with insufficient privileges.
Regards,
Harsha Chava

Start up with external Drive connected and switched on

When starting up with my external USB2 drive connected, it takes ages, I usually resort to switching it off and then back on when my Mac has started. Has anyone got any tips on how to speed up the start up process?
Cheers

Sounds like it may well be the photos (or more likely any video in iphoto) rather than the drive that is causing the issues.
Have you installed all the updates for imovie including the ilife compatibility update.

"Unrepairable" issue on start up with OS 10.7.5 Lion "Permissions"?

Similar Messages

Maybe you are looking for